Tài liệu Designing a Microsoft® Windows® 2000 Directory Services Infrastructure Classroom Setup Guide pdf

Part Number: X05-39394 Course Number: 1561b Released: 2/00 Designing a Microsoft ® Windows ® 2000 Directory Services Infrastructure Classroom Setup Guide Information in this document is subject to change without notice. The names of companies, products, people, characters, and/or data mentioned herein are fictitious and are in no way intended to represent any real individual, company, product, or event, unless otherwise noted. Complying with all applicable copyright laws is the responsibility of the user. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Microsoft Corporation. If, however, your only means of access is electronic, permission to print one copy is hereby granted. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.  2000 Microsoft Corporation. All rights reserved. Microsoft, Windows, Windows NT, Active Directory, BackOffice, PowerPoint, Visual Basic, and Visual Studio are either registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and/or other countries. The names of companies, products, people, characters, and/or data mentioned herein are fictitious and are in no way intended to represent any real individual, company, product, or event, unless otherwise noted. Other product and company names mentioned herein may be the trademarks of their respective owners. Project Lead: Andy Sweet (S&T OnSite) Instructional Designers: Andy Sweet (S&T OnSite), Ravi Acharya (NIIT), Sid Benavente, Richard Rose, Kathleen Norton Instructional Design Consultants: Paul Howard, Susan Greenberg Program Managers: Lorrin Smith-Bates (Volt), Megan Camp (Independent Contractor) Technical Contributors: Angie Fultz, Lyle Curry, Brian Komar (3947018 Manitoba, Inc.), Jim Clark (Infotec Commercial Systems), Bill Wade (Excell Data Corporation), David Stern, Steve Tate, Greg Bulette (Independent Contractor), Kathleen Cole (S&T OnSite) Graphic Artist: Kirsten Larson (S&T OnSite) Editing Manager: Lynette Skinner Editor: Jeffrey Gilbert (Wasser) Copy Editor: Patti Neff (S&T Consulting) Online Program Manager: Debbi Conger Online Publications Manager: Arlo Emerson (Aditi) Online Support: Eric Brandt (S&T Consulting) Multimedia Development: Kelly Renner (Entex) Testing Leads: Sid Benavente, Keith Cotton Testing Developer: Greg Stemp (S&T OnSite) Compact Disc and Lab Testing: Testing Testing 123 Production Support: Ed Casper (S&T Consulting) Manufacturing Manager: Rick Terek (S&T OnSite) Manufacturing Support: Laura King (S&T OnSite) Lead Product Manager, Development Services: Bo Galford Lead Product Managers: Dean Murray, Ken Rosen Group Product Manager: Robert Stewart Course Number: 1561B Part Number: X05-39394 Released: 2/00 Classroom Setup Guide iii Contents Classroom Requirements 1 Classroom Configuration 3 Setup Instructions 5 Automated Classroom Setup 7 Classroom Setup Checklist 11 Customization Information 32 Classroom Setup Guide 1 Classroom Requirements This course requires a classroom with a minimum of one computer for the instructor and one for each student. Before class begins, install and configure all computers by using the following information and instructions. Although only one instructor computer is required for course 1561B, it is recommended that you set up a second instructor computer to serve as a domain controller in the nwtraders.msft domain. This will provide a backup domain controller in case the primary instructor computer fails. Without a backup domain controller, the only way to proceed with the course in case the instructor computer fails would be to redo the classroom setup. Instructor Computer The instructor computer requires the following hardware and software configuration. All hardware must be on the Hardware Compatibility List (HCL) for Microsoft ® Windows ® 2000 Advanced Server. Hardware The following hardware is the minimum required for the instructor computer: ! Pentium II 300 ! PCI 2.1 bus ! 256 megabytes (MB) of RAM ! 4-gigabyte (GB) hard disk ! 256-kilobyte (KB) L2 cache ! 12X CD-ROM drive ! Network adapter (must not use ISA bus) ! 4-MB video adapter ! Super VGA (SVGA) monitor (17 inch) ! Microsoft Mouse or compatible pointing device ! Sound card with speakers ! Internet access ! Projection display device that supports SVGA 800x600, 256-colors Software The following software is required for the instructor computer: ! Microsoft Windows 2000 Advanced Server ! Visio 2000 Enterprise Edition Importan t 2 Classroom Setup Guide Student Computer Each student computer requires the following hardware and software configuration. All hardware must be on the HCL for Microsoft Windows 2000 Advanced Server. Hardware The following hardware is required for each student computer: ! Pentium II 300 ! PCI 2.1 bus ! 256 MB of RAM ! 4-GB hard disk ! 256-KB L2 cache ! 12X CD-ROM drive ! Network adapter (must not use ISA bus) ! 4-MB video adapter ! SVGA monitor (17 inch) ! Microsoft Mouse or compatible pointing device ! Sound card with speakers Software The following software is required for each student computer: ! Windows 2000 Advanced Server ! Visio 2000 Enterprise Edition Classroom Setup Guide 3 Classroom Configuration The following configuration and naming conventions are used throughout this course and are required for the hands-on labs: ! The instructor computer is named London. ! The student computers are named according to the following table. The following table shows the order in which student computers should be installed, in addition to the names and IP addresses that will be assigned to each computer. In the IP addresses, x is the classroom number. Installation order Computer name IP address 1 Vancouver 192.168.x.1 2 Denver 192.168.x.2 3 Perth 192.168.x.3 4 Brisbane 192.168.x.4 5 Lisbon 192.168.x.5 6 Bonn 192.168.x.6 7 Lima 192.168.x.7 8 Santiago 192.168.x.8 9 Bangalore 192.168.x.9 10 Singapore 192.168.x.10 11 Casablanca 192.168.x.11 12 Tunis 192.168.x.12 13 Acapulco 192.168.x.13 14 Miami 192.168.x.14 15 Auckland 192.168.x.15 16 Suva 192.168.x.16 17 Stockholm 192.168.x.17 18 Moscow 192.168.x.18 19 Caracas 192.168.x.19 20 Montevideo 192.168.x.20 21 Manila 192.168.x.21 22 Tokyo 192.168.x.22 23 Khartoum 192.168.x.23 24 Nairobi 192.168.x.24 4 Classroom Setup Guide The classroom is configured in the maximum domain model, as shown in the following graphic. In the maximum domain model, each student computer is a domain controller in its own domain. Domains are named city_nameDOM. For example, the server named Vancouver is located in the domain named VancouverDOM. You must use these domain names for student computers. Classroom Setup Guide 5 Setup Instructions Use the following procedures to prepare each computer for class. The instructor computer (London) must be set up completely before you begin setting up the student computers. Student computer setup occurs over the network by using file shares that are created on the instructor computer. Before You Begin You will need to do the following: ! Read through all setup procedures. ! Make sure that you have the Trainer Materials compact disc that is provided with the course materials. ! Prepare a Microsoft MS-DOS ® system disk and a network boot disk. MS-DOS System Disk To set up the instructor computer, you must have an MS-DOS system disk. This disk must include the following: ! MS-DOS system files. ! MS-DOS drivers for the CD-ROM drive of the instructor computer. ! Xcopy.exe, Xcopy32.exe, and Xcopy32.mod. These files must be located either on the root of the system disk or in a location that is specified in the MS-DOS path statement in the Autoexec.bat file. ! Smartdrv.exe and Himem.sys. Running Smartdrv.exe dramatically increases the performance of the file copying process that occurs during the initial phase of setup. With Smartdrv loaded, this process generally takes 30 minutes or less. Without Smartdrv, it may take several hours. Some computers can use Microsoft Windows 98 startup disks, which include drivers for most CD-ROM drives. Network Boot Disk Setup of the student computers takes place over the network. As a result, you must have an MS-DOS system disk that includes drivers for network adapters in the student computers. In addition, the network boot disk must include the Xcopy.exe, Xcopy32.exe, and Xcopy32.mod files either on the root of the system disk or in a location that is specified in the MS-DOS path statement in the Autoexec.bat file. The batch files that are used to set up the student computers require a large amount of MS-DOS environment space. Therefore, it is recommended that you include the following line in the Config.sys file on the boot disk: Shell = a:\command.com /p /e:1024 Windows 2000 does not include a utility for creating network boot disks. Importan t Note Note 6 Classroom Setup Guide Setup Overview Read this section before you begin configuring the computers. Failure to follow the instructions in this Classroom Setup Guide will cause the labs to fail. These setup instructions provide you with both automated and manual installation procedures and automated configuration procedures. If you complete the automated installation, the configuration is also completed automatically. If you cannot complete an automated installation of the software, you can follow the manual procedures in the Manual Classroom Setup Guide on the Trainer Materials compact disc. Following a manual installation, you must complete the post-installation configuration procedure. It is very important that you allocate enough time for a manual installation if you are not sure that the automated installation will work in your environment. Verify that the classroom is set up correctly by referring to the Classroom Setup Checklist section in this guide. Estimated time to set up the classroom: 3 hours Importan t [...]... as Administrator with a password of password 4 If step 3 fails, log on to the local computer as Administrator with no password 5 If step 4 fails, repartition and reformat the hard disk, and then run setup again Classroom Setup Guide 13 ! To change the password for the Administrator account 1 Open Active Directory Users and Computers 2 Expand nwtraders.msft, and then click Users 3 In the details pane,... restarts and automatically logs you on as Administrator with a password of password After the logon process, a batch file runs and sets the wallpaper for the instructor computer, and then runs DCPromo.exe to install the Active Directory directory service and create the nwtraders.msft domain When Active Directory installation is complete, Setup restarts the computer, logs you on as Administrator, and... the Active Directory message box appears, informing you that the mode change cannot be reversed and asking if you want to proceed, click Yes 5 In the nwtraders.msft Properties dialog box, click OK # Verify that all authenticated users are allowed to log on locally ! To verify 1 Log off as Administrator 2 Log on as schemaadmin with a password of password 3 Log off as schemaadmin ! To give authenticated... to restart your computer, click Restart Computer 9 Refer to the Manual Setup Guide for instructions on manually creating the child domains Classroom Setup Guide 29 # Verify that the password for the Administrator account is password ! To verify 1 Log off, and then log on to the domain as Administrator with a password of password 2 If step 1 fails, log on to the domain as Administrator with no password... Restart Computer 9 Refer to the Manual Setup Guide for instructions on manually creating the nwtraders.msft domain # Verify that the password for the Administrator account is password ! To verify 1 Log off, and then log on to the domain as Administrator with a password of password 2 If step 1 fails, log on to the domain as Administrator with no password 3 If step 2 fails, log on to the local computer as... Directory Sites and Services 2 Expand Sites and verify that the following sites exist: • Default-First-Site • Namerica1 • Namerica2 • Europe1 • Europe2 • Asia1 • Asia2 • Spacific1 • Spacific2 • Samerica1 • Samerica2 • Africa1 • Africa2 ! To create the sites in Active Directory 1 Run the C:\Tools\Newsites.vbs script 2 If the script fails to create the required sites, open Active Directory Sites and Services. .. step 2 fails, log on to the local computer as Administrator with a password of password 4 If step 3 fails, log on to the local computer as Administrator with no password 5 If step 4 fails, repartition and reformat the hard disk, and then run setup again # Verify that the computer has the appropriate IP address ! To verify 1 Click Start, point to Programs, point to Accessories, and then click Command Prompt... Local Area Connection Properties dialog box, click OK 8 Close the Network and Dial-up Connections dialog box # Verify that, when logged on as Administrator, the computer has dark green wallpaper with the computer name in the upper-right corner ! To verify • Log on as Administrator, and verify that the correct wallpaper, logo, and computer name appear 30 Classroom Setup Guide ! To set the wallpaper... Identification tab, verify that the computer name is London and that the computer is a domain controller in the nwtraders.msft domain ! To change the computer name or domain name 1 Click Start, and then click Run 2 In the Open box, type dcpromo and then click OK 3 In the Active Directory Installation wizard, click Next If a message box appears informing you that this computer is a global catalog server,... Schema Admins, and then click Properties 4 In the Schema Admins Properties dialog box, on the Members tab, verify that the Schema Administrator user account is listed 14 Classroom Setup Guide ! To add the Schema Administrator user account to the Schema Admins security group 1 Open Active Directory Users and Computers 2 Expand nwtraders.msft, and then click Users 3 Right-click Schema Admins, and then . the automated installation, the configuration is also completed automatically. If you cannot complete an automated installation of the software, you can. can follow the manual procedures in the Manual Classroom Setup Guide on the Trainer Materials compact disc. Following a manual installation, you must