Hƣớng kiến nghị

Một phần của tài liệu Ứng dụng mô hình mô phỏng trong việc bố trí hợp lý số lao động trong dây (Trang 109)

Để đề tài sẽ phát triển thành một công cụ hiệu quả trong tƣơng lai, trong thời gian tới tác giả sẽ tiếp tục nghiên cứu các phƣơng pháp mô phỏng để bổ sung các chức năng nhƣ mô phỏng cụ thể cho các hoạt động của một nhà máy sản xuất bao gồm nhiều dây chuyền sản xuất và nghiên cứu các trƣờng hợp cụ thể theo yêu cầu sản xuất: nhƣ sản lƣợng thay đổi, máy móc thay đổi nhân công thay đổi để có thể đƣa ra bài toán tổng hợp với phân tích cụ thể.

110

TÓM TẮT LUẬN VĂN

Ứng dụng mô hình mô phỏng là một lĩnh vực rộng, đƣợc ứng dụng trong nhiều ngành với những phƣơng pháp khác nhau. Trong bài báo cáo luận văn chỉ đi tìm hiểu những khái niệm cơ bản về quá trình mô hình mô phỏng nói chung, vấn đề mô phỏng hệ thống sản xuất để có thể ứng dụng vào trong kỹ thuật.

Ngoài ra, bài báo cáo luận văn cũng đã tìm hiểu các ngôn ngữ mô hình mô phỏng đang đƣợc sử dụng. Tìm hiểu cách xây dựng mô hình trong phần mềm SLAM II giao diện AweSim để ứng dụng vào các trƣờng hợp trong quá trình sản xuất. Sử dụng mô hình mô phỏng trong công nghiệp giúp cho cán bộ quản lý đánh giá đƣợc khả năng vận hành của dây chuyền, việc sử dụng các trang thiết bị, các yếu tố ảnh hƣởng đến năng suất từ đó đƣa ra đƣợc các giải pháp phù hợp góp phần tiết kiệm chi phí đầu tƣ, nâng cao năng suất.

Mô hình mô phỏng có rất nhiều bài toán khác nhau, để thực hiện đƣợc các trƣờng hợp cần tìm hiểu và nghiên cứu các phƣơng pháp mô hình, kỹ thuật lập trình trên các ngôn ngữ để có thể đƣa ra đƣợc các kết quả cụ thể cho các trƣờng hợp khác nhau.

A BRIEF OF MASTER THESIS

The Simulation model is a wide field, are applied in many industries with different methods. In the frame work of the thesis only to find out the basic sof process simulation modelsin general, the simulation problem for production system scan be applied in engineering.

The in addition, the thesis also learn the language simulation model being used. Learn how to build models in SLAMII software inter face AweSim to put in to the case in the manufacturing process. Using simulation models in the industry to help managers assess the performance of the line, the use of

111

equipment, factors affecting productivity there by make the solution appropriate contribute to saving investment costs, improve productivity.

In summary, simulation model shave a lot of different problems, to make the case needs to invest more research modeling methods and techniques in programming languages to be able to come up results for specificcases.

112

TÀI LIỆU THAM KHẢO

1. A.Alan B. Pritsker(1986), Introduction to Simulation and SLAMII. 3rd ed.,Systems Publishing Corporation, West Lafayette, Indiana.

2. A.Alan B. Pritsker,O‟Reilly,Jean J. (1997), Simulation with Visual SLAMIIand Awesim, JOnhn Willey &Sons Inc.

3. A.Alan B. Pritsker,O‟Reilly,Jean J. (1986), Introduction Simulation SLAMII

,JOnhn Willey & Sons Inc, NewYork, NJ.

4. Pristker corporation(1999), Awesim total simulation project support. User’s Guide. Symix systems,Inc.

5. A.Alan B. Pritsker, Outline Simulation and SLAMII.

6. Carrie, A.(1988), Simulation of Manufacturing Systems, JOnhn Willey &Sons Ltd.

7. Nguyễn Thành Nhân (2008), Production process improvement in

transportation industry in north Viet Nam through research and appilication of advanced discrete event simulation modeling techniques.

8. Nguyễn Nhƣ Trang (2008), Nghiên cứu lý thuyết mô phỏng trên hệ thống máy tính, ứng dụng thiết kế mô hình lò điện hồ quang siêu cao công suất.

9. Tống Đình Quỳ (2007), Giáo trình sác xuất thống kê, Nhà xuất bản Bách Khoa HN.

10.Hồ Thanh Phong - Mô hình hóa và mô phỏng các hệ thông công nghiệp,

NXB Đại học Quốc gia Tp.HCM 2003

11.Nguyễn Công Hiền: Mô hình hoá hệ thống và mô phỏng – Nhà xuất bản Khoa học kỹ thuật 2003

113

PHỤ LỤC (adsbygoogle = window.adsbygoogle || []).push({});

Phụ lục 1: Kết quả của 5 lần chạy

** AweSim SUMMARY REPORT ** Sun Mar 16 00:07:29 2014

Simulation Project : CH2012B Modeler : Phan Van Canh Date : 1/3/2014

Scenario : LVTN Run number 5 of 5

Current simulation time : 480.073775 Statistics cleared at time : 0.000000

** OBSERVED STATISTICS REPORT for scenario LVTN ** Label Mean Standard Number of Minimum Maximum Value Deviation Observations Value Value

Productivity 3319.800 13.936 5 3304.000 3342.000 TIME IN SYSTEM 2.947 3.963 16599 1.257 47.684 ** FILE STATISTICS REPORT for scenario LVTN **

File Label or Average Standard Maximum Current Average Number Input Location Length Deviation Length Length Wait Time 1 QUEUE EJECTMA 0.001 0.035 4 0 0.000 2 QUEUE SOLDERP 0.000 0.001 1 0 0.000 3 QUEUE ASSEMBL 0.020 0.179 5 0 0.003 4 QUEUE DRY 0.001 0.035 2 0 0.000 5 QUEUE CHECK 1.105 2.003 15 1 0.144 0 Event Calendar 21.441 4.107 39 20 0.479 ** ACTIVITY STATISTICS REPORT for scenario LVTN **

114

Activity Label or Average Standard Entity Maximum Number Input Location Utilization Deviation Count Utilization

1 entr 0.000 0.000 3339 1 10 dprt 0.000 0.000 3319 1 11 return 7.586 2.720 344 17 12 fail1 0.000 0.000 0 0 13 fail2 0.000 0.000 0 0 14 Line 23 0.000 0.000 3319 1 15 Line 16 0.000 0.000 1 1 Activity Current Number Utilization 1 0 10 0 11 8 12 0 13 0 14 0 15 0

** SERVICE ACTIVITY STATISTICS REPORT for scenario LVTN ** Activity Label or Server Entity Average Standard Number Input Location Capacity Count Utilization Deviation 2 Ejectmachine 6 3338 1.387 1.168 4 Solderprint 6 3337 1.042 1.011 6 Assembly 6 3680 2.498 1.524 8 Dry 6 3679 2.108 1.416 9 Check 6 3672 4.776 1.494 Activity Current Average Maximum Maximum Number Utilization Blockage Idle Time Busy Time or Servers or Servers

2 1 0.000 6.000 6.000 4 1 0.000 6.000 6.000 6 1 0.000 6.000 6.000 8 1 0.000 6.000 6.000

115 9 6 0.000 6.000 6.000

** OBSERVED STATISTICS HISTOGRAM REPORT for scenario LVTN **

Observed Histogram Number 2 Label: TIME IN SYSTEM Number of Observations: 16599

Observed Relative Cumulative Upper Cell Frequency Frequency Frequency Limit 0 0.000 0.000 1.000 0 0.000 0.000 1.250 2037 0.123 0.123 1.500 7958 0.479 0.602 1.750 3155 0.190 0.792 2.000 1176 0.071 0.863 2.250 480 0.029 0.892 2.500 124 0.007 0.899 2.750 43 0.003 0.902 3.000 16 0.001 0.903 3.250 2 0.000 0.903 3.500 1608 0.097 1.000 INFINITY

116

Phụ lục 2: Kết quả trạng thái hiện tại hệ thống:

** AweSim SUMMARY REPORT ** Sun Mar 16 18:10:21 2014

Simulation Project : CH2012B Modeler : Phan Van Canh Date : 1/3/2014

Scenario : ACTUAL Run number 240 of 240

Current simulation time : 480.284772 Statistics cleared at time : 0.000000

** OBSERVED STATISTICS REPORT for scenario ACTUAL ** Label Mean Standard Number of Minimum Maximum Value Deviation Observations Value Value

Productivity 3315.738 52.670 240 3170.000 3519.000 TIME IN SYSTEM 2.960 3.963 795777 1.229 71.332 ** FILE STATISTICS REPORT for scenario ACTUAL **

File Label or Average Standard Maximum Current Average Number Input Location Length Deviation Length Length Wait Time 1 QUEUE EJECTMA 0.001 0.032 4 0 0.000 2 QUEUE SOLDERP 0.000 0.004 2 0 0.000 3 QUEUE ASSEMBL 0.021 0.194 8 0 0.003 4 QUEUE DRY 0.003 0.122 14 0 0.000 5 QUEUE CHECK 1.115 2.071 15 0 0.145 0 Event Calendar 20.487 4.281 44 28 0.458 ** ACTIVITY STATISTICS REPORT for scenario ACTUAL **

Activity Label or Average Standard Entity Maximum Number Input Location Utilization Deviation Count Utilization

117 1 entr 0.000 0.000 3321 1 10 dprt 0.000 0.000 3293 1 11 return 7.634 2.884 320 23 12 fail1 0.000 0.000 0 0 13 fail2 0.000 0.000 0 0 14 Line 23 0.000 0.000 3293 1 15 Line 16 0.000 0.000 1 1 Activity Current Number Utilization 1 0 10 0 11 12 12 0 13 0 14 0 15 0

** SERVICE ACTIVITY STATISTICS REPORT for scenario ACTUAL ** Activity Label or Server Entity Average Standard Number Input Location Capacity Count Utilization Deviation 2 Ejectmachine 6 3318 1.376 1.159 4 Solderprint 6 3317 1.037 1.010 6 Assembly 6 3632 2.458 1.535 8 Dry 6 3629 2.075 1.415 9 Check 6 3626 4.732 1.536 Activity Current Average Maximum Maximum Number Utilization Blockage Idle Time Busy Time or Servers or Servers 2 3 0.000 6.000 6.000 4 1 0.000 6.000 6.000 6 5 0.000 6.000 6.000 8 3 0.013 6.000 6.000 9 3 0.000 6.000 6.000

118 (adsbygoogle = window.adsbygoogle || []).push({});

** OBSERVED STATISTICS HISTOGRAM REPORT for scenario ACTUAL **

Observed Histogram Number 2 Label: TIME IN SYSTEM

Number of Observations: 795777

Observed Relative Cumulative Upper Cell Frequency Frequency Frequency Limit 0 0.000 0.000 1.000 20 0.000 0.000 1.250 98980 0.124 0.124 1.500 380473 0.478 0.603 1.750 149648 0.188 0.791 2.000 55689 0.070 0.861 2.250 20452 0.026 0.886 2.500 7584 0.010 0.896 2.750 2951 0.004 0.899 3.000 1084 0.001 0.901 3.250 418 0.001 0.901 3.500 78478 0.099 1.000 INFINITY

Phụ lục 3: Kết quả với kịch bản mới

** AweSim SUMMARY REPORT ** Sun Mar 16 18:34:54 2014

Simulation Project : CH2012B Modeler : Phan Van Canh Date : 1/3/2014

Scenario : WS6_NEW Run number 240 of 240

Current simulation time : 480.077867 Statistics cleared at time : 0.000000

119

Label Mean Standard Number of Minimum Maximum

Value Deviation Observations Value Value

Productivity 3316.637 58.080 240 3161.000 3522.000 TIME IN SYSTEM 2.850 3.921 795993 1.229 69.534 ** FILE STATISTICS REPORT for scenario WS6_NEW ** File Label or Average Standard Maximum Current Average Number Input Location Length Deviation Length Length Wait Time 1 QUEUE EJECTMA 0.004 0.075 6 0 0.001 2 QUEUE SOLDERP 0.003 0.060 3 0 0.000 3 QUEUE ASSEMBL 0.072 0.367 9 0 0.009 4 QUEUE DRY 0.000 0.011 2 0 0.000 5 QUEUE CHECK 0.294 0.868 15 2 0.038 0 Event Calendar 20.489 4.380 44 21 0.458 ** ACTIVITY STATISTICS REPORT for scenario WS6_NEW ** Activity Label or Average Standard Entity Maximum Number Input Location Utilization Deviation Count Utilization 1 entr 0.000 0.000 3343 1 10 dprt 0.000 0.000 3320 1 11 return 7.635 2.883 323 23 12 fail1 0.000 0.000 0 0 13 fail2 0.000 0.000 0 0 14 Line 23 0.000 0.000 3320 1 15 Line 16 0.000 0.000 1 1 Activity Current Number Utilization 1 0 10 0 11 7 12 0 13 0 14 0 15 0

120

** SERVICE ACTIVITY STATISTICS REPORT for scenario WS6_NEW ** Activity Label or Server Entity Average Standard

Number Input Location Capacity Count Utilization Deviation 2 Ejectmachine 5 3341 1.393 1.159 4 Solderprint 4 3341 1.045 0.997 6 Assembly 5 3662 2.479 1.432 8 Dry 6 3660 2.089 1.338 9 Check 7 3651 4.755 1.820 Activity Current Average Maximum Maximum Number Utilization Blockage Idle Time Busy Time or Servers or Servers 2 2 0.000 5.000 5.000 4 0 0.000 4.000 4.000 6 2 0.000 5.000 5.000 8 2 0.000 6.000 6.000 9 7 0.000 7.000 7.000

** OBSERVED STATISTICS HISTOGRAM REPORT for scenario WS6_NEW **

Observed Histogram Number 2 Label: TIME IN SYSTEM

Number of Observations: 795993

Observed Relative Cumulative Upper Cell Frequency Frequency Frequency Limit 0 0.000 0.000 1.000 22 0.000 0.000 1.250 135807 0.171 0.171 1.500 470320 0.591 0.762 1.750 95167 0.120 0.881 2.000 14049 0.018 0.899 2.250 2098 0.003 0.901 2.500

121 376 0.000 0.902 2.750 56 0.000 0.902 3.000 9 0.000 0.902 3.250 2 0.000 0.902 3.500 78087 0.098 1.000 INFINITY

Một phần của tài liệu Ứng dụng mô hình mô phỏng trong việc bố trí hợp lý số lao động trong dây (Trang 109)