Pilosio scaffolding MP catalogue

Multidirectional_scaffolding MP 162 impa_ponteggiENG013.indd 162 05/04/13 18.08 Scaffoldings and Coverings Company | Projects | Products MP MULTIDIRECTIONAL SCAFFOLDING The MP multidirectional system is the modern solution that reflects in an industrialized way all the flexibility of tube and joint scaffolding The special washer welded to the vertical uprights has 4-ways for the orthogonal fastening of stringers and diagonals and other 4-ways slotted that allow the fastening with changeable angle to cover almost 360° In addition to its extreme flexibility, the type of hooking with a wedge and washer is very fast and shortens considerably the assembly and disassembly operations The MP multidirectional scaffolding is the Pilosio’s system with most flexibility and highest possibilities of use even in complex situations thanks to the characteristics of quick assembly, great modularity, extreme adaptability and high load capacity STRENGTHS • the MP modular system consists of simple modular components • full range of accessories to meet any needs on site • simple, fast and intuitive, the assembly and disassembly operations are very quick • it can be combined with other models of prefabricated scaffolding in case of curved structures and with no linear shapes • the MP structures are used to replace any other system of shoring, towers and contrast systems • the MP multidirectional scaffolding is the perfect combination between the productivity of the frame scaffolding and universal flexibility of the tube and joint system • a temporary aluminium guardrail is available for the safe assembly of scaffolding without having to use uncomfortable personal protection equipment against falls 163 impa_ponteggiENG013.indd 163 05/04/13 18.08 Multidirectional_scaffolding MP The technological nature of the MP multidirectional scaffolding allows lining an architectural structure The boards have been used in vertical position to create a volume temporarily enclosed Pilosio has designed special parts for this particular project 164 impa_ponteggiENG013.indd 164 05/04/13 18.08 Scaffoldings and Coverings Company | Projects | Products SPACINGS The spacing of 83 cm with steps up to 300 cm for maintenance with maximum capacity of 150 kg/m2 on the most loaded surface Spacing of 115 cm with spacing up to 250 cm for construction with maximum capacity of 300 kg/m2 on the most loaded floor CHARACTERISTICS Steel pipes with ø of 48.3 mm Hot galvanization finishing 165 impa_ponteggiENG013.indd 165 05/04/13 18.08 Multidirectional_scaffolding MP 166 impa_ponteggiENG013.indd 166 05/04/13 18.08 Scaffoldings and Coverings Company | Projects | Products MANY FIELDS OF APPLICATION It is used in residential, industrial, restoration, marine, aviation, oil, entertainment, archaeological sites, bridges, and in the viaduct sectors as well as in hanged or movable structures POSSIBLE USES • scaffolding for maintenance and construction of faỗades scaffoldings with driveways and pier stops unloading scaffoldings • service stairs for job sites • structures with high capacity for works at a height • towers with very high capacity to support heavy loads at a height • hanged structures when there is no possibility to start from the bottom • contrast systems • movable towers on wheels or carts • boarding • structures for entertainment and audio-video towers • structures for warehousing and storage • bearing structures of any kind to be lined with another material • stage designing With the MP multidirectional scaffolding it is possible to create also mobile towers with swiveling wheels for special maintenance and restoration Even in particular cases such as, for example, maintenance of the lateral and lower parts of bridges and viaducts, when it is not possible to build the scaffolding from the bottom for the presence of water or for a too high altitude, a sliding tower is used to lower down the MP multidirectional scaffolding with related work floors to reach the sections where to operate impa_ponteggiENG013.indd 167 05/04/13 18.08 Multidirectional_scaffolding MP 168 impa_ponteggiENG013.indd 168 05/04/13 18.08 Scaffoldings and Coverings Company | Projects | Products MP MULTIDIRECTIONAL SCAFFOLDING FOR THE NAVAL INDUSTRY The high flexibility of MP multidirectional scaffolding allows numerous advantages for the naval industry, both for construction and for maintenance The scaffolding can be equipped with swiveling wheels The use of brackets allows working safely close to the hull of the ship and without the need for invasive fastenings 169 impa_ponteggiENG013.indd 169 05/04/13 18.09 2000 3500 500 1000 Multidirectional_scaffolding MP 2500 2500