Hướng dẫn truyền thông HMI Delta với CNC Hust. Sơ đồ dây nối, địa chỉ ô nhớ, lập trình. Series HMI Connection Manual HUST CNC HMI Factory Setting Baud rate 9600, 7 ,Even, 2 Controller Station Number 1 Control Area Status Area W0 W10 Connection a RS 232 (DOP AAEAS, DOP B Series) DOP series 9 pin D SUB (RS 232) Controller 9 pin D SUB male (RS 232) RXD (2) (2) TXD TXD(3) (3) RXD GND(5) (5) SG (8) RTS (7) CTS Definition of PLC ReadWrite Address a Registers Format Type Word No (n) ReadWrite Range Data Length Note Word Register Wn W0 – W13500 Word Double Word Register Dn D0 – D13.
Series HMI Connection Manual Hướng dẫn kết nối PLC với HMI Delta DOP HUST CNC HMI Factory Setting: Baud rate: 9600, ,Even, Controller Station Number: Control Area / Status Area: W0 / W10 Connection a RS-232 (DOP-A/AE/AS, DOP-B Series) DOP series Controller pin D-SUB (RS-232) pin D-SUB male (RS-232) RXD (2) (2) TXD TXD(3) (3) RXD GND(5) (5) SG (8) RTS (7) CTS Definition of PLC Read/Write Address a Registers Type Format Word No (n) Read/Write Range Data Length Note Word Register Wn W0 – W13500 Word Double Word Register Dn D0 – D13500 Double Word b Contacts Format Type Read/Write Range Word No (n) Bits No (b) Note BIT_DEVICE_B Bn.b B0.0 – B13500.31 BIT_DEVICE_I Ib I0 – I255 DW BIT_DEVICE_O Ob O0 – O255 DW BIT_DEVICE_C Cb C0 – C255 DW V1.00 Revision March, 2010 www.plc.today 63 Series HMI Connection Manual Format Type Read/Write Range Word No (n) Bits No (b) Note BIT_DEVICE_S Sb S0 - S255 DW BIT_DEVICE_A Ab A0 - A1023 32 DW 64 V1.00 Revision March, 2010 ...Series HMI Connection Manual Format Type Read/Write Range Word No (n) Bits No (b) Note BIT_DEVICE_S Sb