Hướng dẫn kết nối màn hình HMI Delta DOP với PLC, PC Beckhoff

1. Sơ đồ kết nối HMI Delta với PLC, PC Beckhoff. 2. Cấu trúc vùng nhớ. 3. Hướng dẫn lập trình PLC kết nối với HMI

Hướng dẫn kết nối hình HMI Delta DOP với PLC/PC Beckhoff Series HMI Connection Manual BECKHOFF TCP/IP PLC HMI Factory Setting: Controller IP Address: 192.168.0.1 Controller COM Port: 48898 Controller Station Number: Control Area / Status Area: DW0/DW10 Connection Standard Jumper Cable / Network Cable without jumper (Auto-detected by HMI) Definition of PLC Read/Write Address a Registers Type Format Word No (n) Read/Write Range Data Length Note Input Relay IWn IW0 – IW65534 Word Output Relay QWn QW0 – QW65534 Word Internal Relay MWn MW0 – MW65534 Word Data Area DWn DW0 - Word DW2097150 b Contacts Type Format Read/Write Range Bit No (b) Input Relay IXn IX0.0 – IX65535.7 Output Relay QXn QX0.0 – QX65535.7 Internal Relay MXn MX0.0 – MX65535.7 Data Area DXn DX0 - DX16777215 Note NOTE 1) V1.00 Device address must be an even number Revision January, 2016 www.plc.today Series HMI Connection Manual 2) Please set Sender AMS NetId、Target AMS NetId、ADS Port in Communication Setting → Extra Parameter 34 V1.02 Revision December, 2012 ...Series HMI Connection Manual 2) Please set Sender AMS NetId、Target AMS NetId、ADS Port in Communication