Tài liệu Shop Manual & ETM BCM KIA Cerato 2010
2010 > G 1.6 DOHC > Body Electrical System Component Location1. Seat warmer2. Seat warmer switch (LH)3. Seat warmer switch (RH) 2010 > G 1.6 DOHC > Body Electrical System InspectionFront Seat Warmer Switch1. Disconnect the negative (-) battery terminal.LanguageLanguage 2. Remove the floor console (A). (Refer to Body group. - Console)3. Disconnect the seat warmer switch connector(A).4. Check that continuity exists between the terminals(A). 2010 > G 1.6 DOHC > Body Electrical System Inspection1. Check for continuity and measure the resistance between No.1 and NO.3 terminals.Standard value :Leather seat :2.40Ω ± 10% / setFabric seat : 3.24Ω ± 10% / set2. Operate the seat warmer after connecting the connector, and then check the seat warmer by measuring the temperature of seat surface.3. Check for temperature of seat surface after Language disconnecting the connector.Standard value : ON : 34 ± 5°C (93.2 ± °9F)OFF : 43 ± 4°C (109.4 ± 7.2°F) . 2010 > G 1.6 DOHC > Body Electrical System Component Location1. Seat warmer2. Seat warmer switch (LH)3. Seat warmer switch (RH) 2010 >. group. - Console)3. Disconnect the seat warmer switch connector(A).4. Check that continuity exists between the terminals(A). 2010 > G 1.6 DOHC >