http://www.profitind.com Steam Cabinet Less heat-input high speed turbo jet burner & No Air Blower required Easy Operation & Safety The unit equipped with a unique design of air/gas pre-mixing turbo jet burner that produces relatively low flue temperature during combustion Built-in overheat sensors in the stainless steel heating chamber act as protective device which prevents overheating while greatly prolongs the life span of the chamber Electronic Ignition Device & high quality Flame Failure Device are also equipped for burners that help to create a safe workplace for cooks No Sound Pollution No air-blower design keeps the noise level lower than 70dB that absolutely provides a quiet work environment for kitchen crews Speedy, Ample & Powerful Steam Production Special design of stainless steel heating chamber together with the powerful burner generates continuous and powerful secondgenerated steam rapidly in minutes for clean and quality food The shorter start-up time than traditional steaming equipment is profoundly a feature to satisfy a high efficient kitchen Hygiene, Durable, Easy Cleaning & Maintenance SCE-1-N2-GET 27.6” Stainless steel exterior construction and internal water tank with automatic floating ball valve for easy cleaning Front loaded components and parts design makes it easy for regular maintenance and servicing SCE-3-N2-GET 27.6” 33.5” 33.5” Cost Saving 24.6” 27.6” No electric air-blower is required Electrical power saving and no chance of electrical failure occurs which save both energy and cost for maintenance and servicing 2) Specially designed less heat-input high speed turbo jet burner, that produces relatively low flue temperature, minimizes energy wastage This in turn reduces fuel cost and facilitates environment protection What’s more, the cooking performance is not affected and food freshness is still preserved 3) Air gap insulation reduces material cost and is also environmental friendly SCE-3-N2-GET 6.9” SCE-1-N2-GET 6.9” 1) 4” 24.6” 35.8” 8” 13.8” 74.8” 24.6” 35.8” 4” 43.3” 5.1” 70.9” 8” 22.5” Specifications of Steam Cabinet ġġ Model Single Door Three Doors SCE-1-N2-GET SCE-3-N2-GET Dimensions Width x Depth x Height (inch) 27.6 x 35.8 x 70.9 33.5 x 35.8 x 74.8 Width x Depth x Height (mm) 700 x 910 x 1800 850 x 910 x 1900 Solenoid Loading (kW) Voltage (V/Ph/Hz) 0.0154 (110~120/1/50~60) or (220~240/1/50~60) Stainless steel slatted bar shelving Heat input kW (BTU / hr.) Town Gas 45 (153546) 45 (153546) Propane (L.P Gas) 45 (153546) 45 (153546) Natural Gas 45 (153546) 45 (153546) Remark Standard Accessories: pcs stainless steel slatted bar shelving for single door Steam Cabinet pcs stainless steel slatted bar shelving for doors Steam Cabinet Operating Pressure (inch in Water Column) Town Gas 6 Propane (L.P Gas) 11 11 Natural Gas 7 Fuel suit for: Town Gas, Natural Gas, Propane (L.P Gas) (must specify gas type before ordering) Town Gas Ø1 Ø1 If any of these units will be installed in area with hard water supply, water softener shall be installed before water inlet of the unit to avoid any damages may occur to the heating chamber Propane (L.P Gas) Ø1 Ø1 Natural Gas Ø1 Ø1 Ø0.5 / Ø1.5 Ø0.5 / Ø1.5 167 / 242 202 / 322 Fuel pipe connection (inch) Water inlet / Drainage pipe (inch) Water inlet / Drain Net / Gross Wt (kgs) POF-ETL-04-2010-V1 - - Optional Accessories: Ø430mm Rice Pan Daily cleaning & water drain from heat exchange chamber after daily use