http://www.profitind.com Steamer (Dim Sum) FSE-1-N2-GET Steamer with removable rice roll tray (for reference) FSE-2-N2-GET 37.4” 37.4” 70.9” 70.9” Ø20.5” 41.3” 31.9” Optional Accessories of Steamer : Removable rice roll tray 17.3” 20.5” Remark 23” 5.3” 6.9” 6.9” 31.9” 41.3” 17.7” Ø20.5” 17.7” Ø20.5” 41.3” FSE-1-N2-GET Specifications of Steamer (Dim Sum) Standard Accessories of Steamer (1 set for Single Steamer & sets for Double Steamer) 4.7” Elevation Steam container supporter Plan 20.5” Handle 2.8” Mesh Elevation FSE-2-N2-GET Width x Depth x Height (inch) 37.4 x 41.3 x (31.9 + 17.7) 70.9 x 41.3 x (31.9 + 17.7) Width x Depth x Height (mm) 950 x 1050 x (810+450) 1800 x 1050 x (810+450) Solenoid 17” Plan Elevation Rice Pan 3.5” 24” Plan 7-hole plate Fuel suit for: FSE-1-N2-GET Dimensions Steam container cover 4.5” Plan Double Steamer Model Elevation Handle Steam container Single Steamer 20.5” 20.5” Plan ġġ 8” Loading (kW) Voltage (V/Ph/Hz) 0.0154 (110~120/1/50~60) or (220~240/1/50~60) Heat input kW (BTU / hr.) Town Gas 45 (153546) x 45 (153546) Propane (L.P Gas) 45 (153546) x 45 (153546) Natural Gas 45 (153546) x 45 (153546) Operating Pressure (inch in Water Column) Town Gas, Natural Gas, Propane (L.P Gas) (must specify gas type before ordering) If any of these units will be installed in area with hard water supply, water softener shall be installed before water inlet of the unit to avoid any damages may occur to the heating chamber Daily cleaning & water drain from heat exchange chamber after daily use Town Gas 6 Propane (L.P Gas) 11 11 Natural Gas 7 Fuel pipe connection (inch) Town Gas Ø1 x Ø1 Propane (L.P Gas) Ø1 x Ø1 Natural Gas Ø1 x Ø1 Ø0.5 / Ø1.5 Ø0.5 / Ø1.5 172 / 272 342 / 502 Water inlet / Drainage pipe (inch) Water inlet / Drain Net / Gross Wt (kgs) - - POF-ETL-04-2010-V1