Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống
1
/ 1.081 trang
THÔNG TIN TÀI LIỆU
Thông tin cơ bản
Định dạng
Số trang
1.081
Dung lượng
44,84 MB
Nội dung
Tai ngay!!! Ban co the xoa dong chu nay!!! Mechatronics and Industrial Informatics II Edited by Prasad Yarlagadda Seung-Bok Choi Mechatronics and Industrial Informatics II Selected, peer reviewed papers from the 2014 2nd International Conference on Mechatronics and Industrial Informatics (ICMII 2014), May 30-31, 2014, Guangzhou, China Edited by Prasad Yarlagadda and Seung-Bok Choi Copyright 2014 Trans Tech Publications Ltd, Switzerland All rights reserved No part of the contents of this publication may be reproduced or transmitted in any form or by any means without the written permission of the publisher Trans Tech Publications Ltd Churerstrasse 20 CH-8808 Pfaffikon Switzerland http://www.ttp.net Volume 596 of Applied Mechanics and Materials ISSN print 1660-9336 ISSN cd 1660-9336 ISSN web 1662-7482 Full text available online at http://www.scientific.net Distributed worldwide by and in the Americas by Trans Tech Publications Ltd Churerstrasse 20 CH-8808 Pfaffikon Switzerland Trans Tech Publications Inc PO Box 699, May Street Enfield, NH 03748 USA Fax: +41 (44) 922 10 33 e-mail: sales@ttp.net Phone: +1 (603) 632-7377 Fax: +1 (603) 632-5611 e-mail: sales-usa@ttp.net Preface This volume records the accepted papers of 2014 2nd International Conference on Mechatronics and Industrial Informatics (ICMII 2014) which took place in Guangzhou, China between 30-31 March, 2014 This conference brought together leading researchers and scientists in the domain of mechatronics and industrial informatics from across the nation The experience of various researchers was intended to be brought to an audience comprising of young researchers, so that they get to know the state of the art in the field We are grateful to the program committee members and the external reviewers for their hard work and expertise in selecting the program Our special thanks go to many people worked together in organizing ICMII 2014 and ensuring its success We hope that they found their involvement just as interesting and fun as we did The Committee of ICMII 2014 2014 2nd International Conference on Mechatronics and Industrial Informatics (ICMII 2014) Conference Organization Co-Chairmen Prof Seung-Bok Choi, Inha University Prof Yun-Hae Kim, Korea Maritime University, Korea Prof Prasad Yarlagadda, Queensland University of Technology, Australia Technical and Organizing Committee Prof Yi-Sheng Huang, National Ilan University, Taiwan Prof Chen-Chien Hsu, National Taiwan Normal University, Taiwan Prof Zhong Wende, Nanyang Technological University, Singapore Prof Jiankun Hu, University of South Wales, Australia Prof Yong Guan, Iowa State University, USA Prof Yao-Wen Chang, National Taiwan University, Taiwan Prof Wenjun Meng, Taiyuan University of Sci and Tech., China Prof Haoran Geng, University of Jinan, China Prof Nabil Gindy, University of Nottingham, UK Prof Toshio Haga, Osaka Institute of Technology, Japan Prof Jong Kook Lee, Chosun University, Korea Prof Yong-Lin Kuo, National Taiwan Univ of Sci and Tech., Taiwan Prof Mao-Hsiung Chiang, National Taiwan University, Taiwan Prof Qiang Wang, Jinan University, China Prof Sihai Jiao, Research Institute, Baosteel, China Prof Xiaoping Zhou, Hubei University Of Technology, China Prof Jian Gao, Guangdong University of Technology, China Prof Xiaobo Zhou, University of Colorado at Colorado Springs, USA Prof Yun-Hae Kim, Korea Maritime University, Korea Prof Carlos Caceres, The University of Queensland, Australia Prof Shahrum Abdullah, University Kebangsaan Malaysia Dr Xiangping Bu, Wayne State University, USA Prof Sagar Kamarthi, Northeastern University, USA Prof Heinz-Gunter, Brokmeier, Technische Universitat Clausthal Prof Zhengyi Jiang, University of Wollongong, AU Prof Niels Bay, University of Denmark, Denmark Prof Viktor P Astakhov,General Motor Business Unit of PSMi Prof Cesar de Sa, Jose, University of Porto, Portugal Prof Phil Koshy, Mcmaster University, Hamilton,Ontario, Canada Prof Kambakar P Rajurka University of Nebraska-Lincoln, USA Prof Kaiming Wu, Wuhan University of Science and Technology, China Prof Shaohui Yin, Hunan University, China Prof Jinglong Bu, Hebei United University, China Prof Wenlei Sun, Xinjiang University, China Prof Jun Wang, Northeastern University, China Prof Jeng-Haur Horng, National Formosa University, Taiwan Prof Jiwei Cai, Hebei United University, China Prof Wu-Shiung Feng, Chang Gung University, Taiwan Prof Keon Myung Lee, Chungbuk National University, Korea Table of Contents Preface and Conference Organization Chapter 1: Applied Mechanics, Mechanisms and Dynamics Experimental Study on the Transverse Stiffness of WJ-8 Rail Fastening C Liu, Z.P Zeng, B Wu, J.Y Yuan and X.F He Research on Modeling and Characteristics of Two-Stage Pressure Hydro-Pneumatic Spring Z.X Li, Z.L Ma, H Jiang and X Xu Study on the Mechanism of Detecting Flaws in the Transmission Tower Foundation by the Finite Element Method X.M Shi, Q Gao, J.J Liu, J.G Zhang, D.B Cheng and N.L Zhang Study on Torsion-Eliminating Performance of Laterally Interconnected Air Suspension Z.X Li, L.Y Ju, H Jiang and X Xu SVR Based Modeling Method to Structures Finite Element Uncertainty Propagation Analysis Y Zhu and S.H Zhu Hopf Bifurcation Analysis of Digital Hydraulic Cylinder J Chen, J.F Xing and B.J Lv Simulation on Kinetic Characteristics of Moving Mooring Marine Current Turbine System Y.Y Tian, J Yu, S.C Sun and X.T Li 12 17 22 27 32 Chapter 2: Materials Processing and Advanced Manufacturing Technology Situation of Natural Gas Hydrate Research Z Li, M.H Kun, Z.L Ming and Z.S Yang Study on the Stainless Steel 1Cr18Ni9Ti Micro-Hole Drilling Experiment B.H Li, Z Liu, H Wang and Z.S Zhong The Influence of Electric Parameters on the Surface Quality of Ceramic in Internal Grinding Using the Ultrasonic and ELID Composite Grinding Y.Y Zheng, H Pang, Q You and X.F Jia Equipment Modification for Friction Stir Joining Based on PLC L Ji Research on Galvanized Layer Uniformity Detecting Technology of Transmission Angle Steel Tower Materials J.Y Jiang The Improved Design of Embedded CNC Milling Machine H.Y Zhang and Y.F Shu 39 43 47 52 56 60 Chapter 3: Product Design, Manufacturing and Industrial Informatics Applications Simulation Research on the Magnetic Field of the Positioning Permanent Magnet for MEMS inside Human Body Based on Ansoft X.Q Liu and Y.H Li The Design and Calculation of Fur Material Cleaning Machine Y Su, Z.F Li and S.Q Huang The Semi-Automatic Restoration of Regular Paper Fragments Z.Q Ding Development of Computer-Aided Manufacturing System for a Jewelry-Making CNC Machine Y Miao, K He, H.T Fang, Z.M Zhou and R.X Du 67 72 79 83 b Mechatronics and Industrial Informatics II Analysis of the Ceramic Pattern Modelling Based on Primitives J.F Hu and B.S Li Research and Application of Adaptive Technology in Equipment Installation B Luo and L Ye The Design and Manufacture of the Wireless Power Transmission System in the Cardiac Pacemaker X.Q Liu, Y.H Li, L Min and H Ping Regarding Calculation of Cross Section of Elevator Conductor and Rated Capacity of Switch G.M Huang Design of Mine Ventilator Fault Diagnosis System B.T Zhao, X.F Jia and Y He Nonlinear Econometric Model of Electronic Products and its Application H.Y Zhou Study on the Transformation of Military Logistical of Internet of Things Era Y Lu, C Xie and L Shang The Research on Cloud Mobile Office System Development for Enterprise Application F Wu, Z.M Wang, G Yao and Z.M Miao An Execution Framework for Domain-Oriented QoS Evaluation of Manufacturing Cloud Services H Jin, X.F Yao and J Zhang Using Verification Planner to Track the Verification Process X Huang, D Jun, L.T Liu and L.C Liu Comprehensive Evaluation of the Development Level of Shanxi’s Real Estate Industry Based on Factor Analysis and Cluster Analysis X.L Tang and Z.L Tan Research of Refined Oil Emergency Reserve Monitoring System Construction Scheme N Chen, Q.M Zhang and D.D Tang 90 94 100 104 110 114 119 123 127 131 136 141 Chapter 4: Computer Information Processing Technology, Artificial Intelligence and Intelligent Algorithms An Algorithm for Representing Planar Curves in B-Splines Z.Z Lin and S.H Shu Dynamic Pricing and Inventory Temperature Decisions for Fresh Foods with Variable Demands L Tang Forecasting High Frequency Data: An ARMA-Soft RBF Network Model for Time Series D Marcek Fuzzy Comprehensive Assessment of Air Material Suppliers Z Lv Mixed NMF Blind Source Separation Algorithm Z.J Zhao and Z.J Liu Natural Gas Consumption Forecasting Based on Combinatorial Optimization Model J.Q Wang, L Chen, L Li and Y.X Wang Rough Match Function Based on Topological Structure Y.L Zheng The Effect of Empathic Technology on Artificial Intelligence J.G Liu and Q Li Research of Smart Home System Based on Handheld Device B Li, H.Y Dai and H.F Cheng A Self-Adaptive Harmony Search Algorithm for Unconstrained Optimization Problems P Zhang, P Sun, Y.N Zhang and G.J Li Ceph CRUSH Data Distribution Algorithms X.Y Liang and Z.C Guan Forecasting Consumer Confidence Index Based on Radial Basis Function Neural Network H.Y Xie, G.Y Chen, Z He and D.P Zhao 149 154 160 164 169 174 179 183 188 192 196 200 Applied Mechanics and Materials Vol 596 Performance Comparison of Energy-Aware Task Scheduling with GA and CRO Algorithms in Cloud Environment L Wu, Y.J Wang and C.K Yan Rapidly Analyze the Fault Tree with Numerical Methods B Wu, Z.H Zhao and Y.H Ren Research of Differential Evolution Algorithm for Motor Control Z.F Wu An Improved RFID Tag Collision Algorithm T.B Ran and X.S Wu Targets Detection Based on Multifractal Method F Liu Hybrid Intelligent Optimization Approach for RFID Network Planning D.L Guo, Q Xiang and Z.H Li Optimization of Multitask in Real-Time Control Based on Artificial Bee Colony Algorithm S.M Chen, Y.T Xu, Q.X Hu and Z.T Wang Research for Wind Power System Reactive Power Optimization Based on Improved Artificial Fish Swarm Algorithm S.H Zhang The Prediction of Grounding Grid Corrosion Rate Using Optimized RBF Network C.F Song, Y.B Hou and J.Y Du Research on Multi-Agent Formation’s Obstacle Avoidance Problem Based on ThreeDimensional Vectorial Artificial Potential Field Method J.Y Dai, L.F Yin, C Peng, B.J Yang and C.S Wang A Evaluation Model for Valid Prediction of Cabs’ Number Change from Urban Cabs Trajectories W.B Ma, S Deng and H.B Huang A Method of Building Chinese Sentiment Lexicon Based on Semantics J.N Yang, A.M Yang and Y.M Zhou A Model of Predicting Corrosion Rate for Substation Grounding Grid Based on the Similarity and Support Vector Regression J.Y Du, J Han, Y.J Zhao and W.H Liu Efficient Graph Component Labeling on Hybrid CPU and GPU Platforms X.H Pan Evaluation Research on Agricultural Informatization Level in Tropical Areas of China Based on Entropy Method L Ye, Y.P Li, X.L Qin, Y.Q Liu, W.H Liang and Q.D Song The Generalized Fuzzy Time Series Model for Forecasting Base on the Optimization of the Length of Intervals Y.H Wang and W.R Qiu Web Page Ranking Algorithm Based on the Meta-Information X.L Li E-Bayes Estimation of Burr Distribution Parameter under Square Loss Function H.B Liu, T Yin and C Wang E-Bayes Estimation of Laplace Distribution Parameter under Q-Symmetric Entropy Loss Function H.B Liu, T Yin and C Wang E-Bayes Estimation of Rayleigh Distribution Parameter H.B Liu, T Yin and C Wang c 204 209 216 222 226 230 234 241 245 251 259 263 271 276 280 286 292 297 301 305 Chapter 5: Sound, Image, Signal and Video Processing and Technologies 2D(PC)2A Based Dimensionality Reduction of Textural Feature for Face Recognition with a Single Training Sample W.H Sun A Local Optical Flow Constraint Target Extracting Algorithm of Kalman Filter Based on Background Modeling Y.N Wang 311 316 Applied Mechanics and Materials Vol 596 Dynamic Trend Dynamic Update 687 856 E E-Bayes Estimation E-Commerce E-Government Early Warning EC Environment Edge Contrast Matrix Edge Detection Edge Effect Edge Enhancement Efficiency Matrix Electric Power Steering Electric Railway Electrical Parameters Electrical Properties Electromagnetic Compatibility Electromagnetic Interference Electronic Products Elevator ELID Grinding Elliptic Curve Embedded Embedded System EMD Emergency Power Supply Emergency Reserve Emission Reduction Benefits Empirical Formula Energy Energy-Awareness Energy Management Energy-Saving Energy Saving Benefits Energy-Saving Dispatch Engineering Ability Enterprise Application Entropy Method Environmental Engineering Microbiology Environmental Problems EPS Equipment Installation Equipment Modification Equivalent Electric Power Communication Network Error Analysis 297, 301, 305 966 971 576 951 79 350 540 355 1030 751 625 47 822 918 918 114 104 47 519 60 536, 883 437 664 141 649 43 519 204 678 682 649 669 1040 888 280 1052 39 739, 751 94 52 653 468 Evaluate Evaluation Model Evolution Rule Excavator Experiment Table Experiment Teaching Experimental Study Experimental Teaching System Extraction of Light Stripes Center 1071 280 259 966 602 739 1026 17 1034 449 F Face Recognition 346, 427 Face-to-Face Transfer 847 Facial Expression Recognition 322 Facility Vegetable 576 Factor Analysis 136 Fast Cut Back 674 Fast Finite-Time Consensus 552 Tracking Fault Diagnosis 110, 437, 528 Fault Identification 713 Fault Location 659 Fault Tree 209, 696 Feature Space 388 FFMpeg 328 FHN Neuron 413 Fidelity 729 Finite Element (FE) 12 Finite Element Simulation 540 Firewall 852 Flash Animation 998 Flaw 12 Flexible Brake 547 Flow Coupled 602 Forecast 200 Forecast Accuracy 160 Forecasting 174 Forecasting Model 286 Formation Control 631 Fourier Descriptor 427 FPCS 457 FPGA 873 Fractal Theory 226 Fractional Brownian Motion 427 Fractional Distance 388 Frequency and Inductor Combined 704 Adjustment Frequency Characteristic 687 Frequency Estimated Filter 342 1072 Mechatronics and Industrial Informatics II Frequency Response Function Estimation Frequency-Sectioning Iterative Correction Fresh Foods FSJ FT231X Fur Material Fused Side-Adhere Fuzzy Comprehensive Assessment Fuzzy Comprehensive Evaluation Fuzzy Control Fuzzy Mathematics Fuzzy Neural Network (FNN) Fuzzy Time Series 610 610 154 52 773 72 826 164 1056 739 1056 751 286 Hierarchical Cluster Analysis Method High Education High-Order System High-Speed Train Hinge Sleeve of Cubic Press Histograms of Oriented Gradients Hopf Bifurcation Human Factors Human Inertia Parameters Hungarian Method Hv Estimator Hydraulic System Hydro-Pneumatic Spring Hydrocarbon Micro-Seepages Hα Full-Disk Solar Image 280 1040 594 468 472 322 27 1034 453, 480 1030 610 598 457 365 G GA Algorithm Gabor Filter Galvanized Layer Uniformity GARTEUR Model Confidence Interval Gaussian Curve Geographic Information System Geophysics Glass Furnace Temperature Control Global Positioning System Government Business Model Governor GPS/BD2 GPU Graff Graph Cuts Graph Processing Graph Transformation Ground Truth Grounding Grid Corrosion Rate Guide 204 311 56 22 449 719 616 580 719 960 692 735 276 903 398 276 966 398 245, 271 998 H Handheld Devices Hardware Harmony Search HAZOP HEVC HHT Hierarchical Hierarchical Bayes Estimation 188 903 192 696 328 433 1022 297, 301, 305 I Identifying IEKF Algorithm Image Compression Image Processing Image Retrieval Image Segmentation Impact-Echo Improved Design Improved K-Means Improved M/T Velocity Measurement Improved Particle Swarm Optimization Impurity Scattering Incomplete Gear Individual Demand Individual Patterns Industrial Engineering Information Service Information Service Center Information Service Model Information Society Policies Infrared Right Angle Prism Ink Spreading Inspection of Lightning Protection Systems of Highway Integrated Automation Integrated Optics Integrated Optics Devices Intellectual Inspection System of Transmission Line Intelligent Bird Repellent 355 494 406 909 337 337 12 60 951 468 649 226 72 1022 90 1034 971 971 971 1065 788 417 498 636 799 799 719 782 Applied Mechanics and Materials Vol 596 Intelligent Optimization Intelligent Optimization Algorithm Intensity of Sentiment Interaction Interface Interferogram Internet Internet of Thing (IoT) Intrusion Detection Inverse Laplace Transformation IOT Application IPv6 Router ISP1161 216 230 263 998 923 342 838 119 852, 888 594 981 892 883 J Java Technology Jewelry-Making CNC Machine Jiangcheng Culture 931 83 1003 K K-Mean K-SVD Kaiser Window Kalman Filter Kalman Filtering Key Management Kinetic Characteristic Knot Vector Knowledge Learning Platform Knowledge Management Knowledge Services 484, 951 333 659 316 398 986 32 149 1013 1013 1013 L LabVIEW Landing Point Predicting at Sea Lane Mark Laplace Distribution Lateral Displacement Lateral Horizontal Force Laterally Interconnected Law of Bit Significance Least Square (LS) LED Lifting System Light Scattering Model Lightning Location Limit Cycle Line Structured Light 914 463 355 301 3 17 847 169 442 602 417 713 27 449 Linearization Meteorological Factors Linux Liquid Crystal Shutter Load Calculation Local Terrain Slope Local Trouble Location Based Service Logistics Management Longitudinal Crack Loss Low Frequency Oscillation Lower Rough Set LTE 1073 700 188, 944 442 104 342 251 259 620 747 788 692 179 811 M Magnetic Positioning Manipulator Manual Intervention Marine Current Turbine Markov Chain Monte Carlo Particle Filter Marshalling Station MATCONT Math Model Mathematical Morphology MCU Measurement Measurement Accuracy Media-Stream Network MEMS Metamaterials Metering Model Methodology Micro Class Teaching Micro-Hole MicroAge Microbiology Microgrid Microprocessors Military Logistical Milling Machine Mine Ventilator Mineral Alteration Minimum Integration Step Width Mirror Current Source Mobile Data Acquisition Technology Mobile Information Platform Mobile Phone Short Message 67 640 79 32 379 636 27 602 361 547 490 480 847 532 816 114 183 1009 43 1009 1026 678 536 119 60 110 457 463 723 498 719 576 1074 Mechatronics and Industrial Informatics II Modal Analysis Mode Conversion Mode Division Multiplexing Model Model Free Adaptive Control Model Uncertainty Quantization Analysis Model Validation Model-View-Controller (MVC) Modelica Modeling Modular Architecture Modular Production Line Modularity Process Monitoring Monte Carlo Sampling Mooring Morphological Filtering Motion Simulation Moving Object Detection Multi-Agent Formation Multi-Agent Systems Multi-AUVs Multi-Disciplinary Multi-Information Synchronous Acquisition System Multi-Lomain Modeling Multi-Point Measurement Multicarrier Multimedia Network Classroom Multimedia Technology Multiple Factor Multiscale Inverse Transform Multiscale Transform Multisim10 Multitask Communication Mutual Coupling Reduction MW Wind Turbine 594 807 807 174, 1040 580 22 22 923 927 692 1060 1060 1060 141, 576 379 32 433 640 361 251 552 631 572 476 927 659 794 931 370, 1026 222 365 365 723 234 816 598 N Nanosilica Powder Natural Gas Natural Gas Hydrate NC Network System NC Program Network Network Planning Network Security Network Technology 826 174 39 838 83 653 230 852, 888 1009 Neural Network Neuroergonomics Experiment New University Next Generation Network NHPP Nitrogen-14 No Reference Image Quality Assessment NoC Node Attraction Non-Linear Equations Nonlinear Constrained Optimization Nonlinear Exosystem Nonlinear Model NQR NS-2 NSGA-ΙΙ Algorithm Numerical Control Numerical Method Numerical Simulation 110, 584 1034 1048 847 877 505 350 892 843 216 234 560 114 505 833 760 52 209 616 O Object Detection Object Tracking Obstacle Avoidance Problem Off-Axis Office Automatic Office Platform One Sample per Person Problem Online Online Authority Online Community OpenCV Optical Dot Gain Optical Fiber Collimator Optical Fiber Communication Optical Fiber Coupler Optical Flow Constraint Optimal Assignment Optimal Path Optimization Optimize Optimum Initial Integration Value Output Regulation Oxide Film 374 398 251 788 123 123 311 990 994 994 909 417 788 788, 799, 807 826 316 664 664 755 960 463 560 47 P Page Category 292 Applied Mechanics and Materials Vol 596 Page Hits Frequency Page Rank Page Update Time PAPR Parabolic Fitting Parallel Plate Capacitance Parallel Processing Parameter Setting Strategy Parking Query Particle Filter Partition of Interval Peak Clipping and Valley Filling Pedestrian Traffic Behavior Permanent Magnet Phase Comparison Photonic Crystal Fiber Physical Dot Gain Pitch Detection Planar Curve Representing Point-To-Point Transfer Position Positioning Potential Analysis Power Grid Enterprises Power-Law Poisson Process Power Quality Practice Prediciton Predictive Coding Principal Component Analysis (PCA) Product Researching Professional Core Competencies Programmable Logic Controller (PLC) Project Management Promote Propagation Rate PSCAD PSD Replication Pseudorandom Psychological Characteristics Pulse Cancellation Pushlet PWM PXI PXI Platform PyGTK 292 292 292 794 449 540 892 192 909 379 286 760 743 67 659 826 417 433 149 847 755 936 682 682 877 625 1022 259 406 346, 402 1044 1048 52 1044 1048 868 692 610 183 743 794 899 547 766 472 328 1075 Q Q Cluster Q-Symmetric Entropy Loss Function QoS Routing QR Code Quality Management Quality of Service 79 301 856 936 1018 127 R Radial Basis Function (RBF) Neural Network Radio Frequency Identification Radio-Interface Rank One Rayleigh Distribution RBF Neural Network Reactive Power Optimization Real Estate Industry Real-Time Data Transmission Real-Time Detection Real-Time Industrial Control System Real-Time Performance Real Time Web System Reentry Measurement Refined Oil Regional Importance Regular Trend Relay Reliability Reliability Analysis Rendering Tree Repetitive Control Research Situation Reserve Optimization Resource Optimization RFID RFX2401C Road Roughness Robust Face Recognition ROI Rotational Force Rotational Inertia Rough Match Function Rough Match Neighborhood Group Rough Neighborhood Structure Rough Set 200 230 811 169 305 160, 245 241 136 766, 873 394 234 511 899 463 141 337 687 547 653, 877 696 370 625 39 669 856 119, 222, 620 773 490 311 350 251 687 179 179 179 110 1076 Mechatronics and Industrial Informatics II Roundness RPC RSA Rumor Propagation Model 747 625 519 868 S S3C4510B Saber SaHS SAM SAR Image Scale-Free Network Scene Management Scene Organize Scilab Search Engine Search Zone Security Seismic Waves Selection Self-Convolution Semantic Units Semantic Web Semi-Supervised Support Vector Machines Sensor Sensor Bias Sentiment Analysis Sentiment Lexicon Separation Performance Server Push Servlet Shadow Inhibition Shanxi Province Shear Stress Ship Maneuverability Ship Motion Model Short-Term Load Forecasting Shortest Path Shortwave Station Side Face Recognition Signal Transmission Characteristics Simulation Simulation Analysis Simulation Model Simulation System Simulink Simultaneous Factor 883 709 192 636 484 868 370 370 209 292 388 519 616 636 659 263 1013 484 528, 540 511 263 263 169 899 899 374 136 532 590 590 700 861 782 427 413 17, 32, 83 43, 723 729 572 927 104 Sliding Mode Sliding Mode Control Sliding Mode Manifold Small Cell Smart Home SN-GPSR Software Architecture Software Firm SolidWorks Sparse Representation Spatial Coordinate Transformation Spatial Light Modulator Spatial Multi-Scaled Spectral Leakage Speech Recognition Speech Synthesis SQL Server SSCR Statistical Model Step-Varying Stereo Image Coding Stiffness Characteristics Stochastic Resonance (SR) Strategic Supplier Stress-Displacement Model Stripe Noises Subcritical Units Substation Suitable Patterns Super-High Pressure Supercomputer Supplier Selection Supply Chain Management Support Vector Machine (SVM) Support Vector Regression Surface Quality SVR SWOT Analysis Synchronization System of Measurement of MultiPoints Strain 565 584 584 811 188 833 966 1044 640 333 565 807 322 659 384, 402 384 914 755 394 610 406 413 1060 94 365 674 696 90 472 328 1056 154 402, 528 271 47 22 1065 811 472 T Target Detection Target Extracting Target Moving Analysis Task Scheduling TDALE Temperature 226 316 494 204 519 755 Applied Mechanics and Materials Vol 596 Test Instrument Test Point Arrangement Form Thermally Expanded Core Fiber Three-Dimensional Modeling Three-Dimensional Vectorial Artificial Potential Field Method (TDVAPF) Three-Phase Current Source Inverter Time Lag of Non-Linear Multivariable System Time-of-Use Power Price Time-Varying Topological Structure Torsion-Elimination Total Quantity of Knowledge Tracing Accuracy Tracking Tracks Association Traditional Publishing Traffic Professional within the Hub Transient Waveform Characteristics Transmission Line Transmission Tower Foundation Transverse Stiffness Triode Tropical Areas Tunable Parameters Tutor Selection Two-Stage Pressure 766, 873 56 788 640 251 565 580 760 580 179 17 653 494 355 511 981 729 713 659, 713 12 723 280 843 1030 U UG Ultrasonic Cleaning Ultrasonic Grinding Unbalanced Power Upper Rough Set Urban Roundabout USB USB Coordinator 598, 606 704 47 687 179 833 883 773 V V2G VANET Variable Demands Variable Structure Varying Lighting Condition Vector Similarity 664 833 154 565 311 271 Vehicle Bench Test Vehicle Terminal Velocity Measurement Accuracy Velocity Measurement System Verification Verification Planner Vibration Video Capture Video Object Video Surveillance Video Tracking Virtual Experiment Virtual Leader Virtual Machines Visual Communication Visual Library Visualization Modeling Voice Assistant Volumetric 3D 1077 490 735 468 468 131 131 437 536 394 536 379 1052 552 903 1003 346 960 384 442 W Wake-Up Word Wave Propagation Wavelet Analysis Wavelet Energy Spectrum Wearable Ad Hoc Networks Wearable Computing Web Design Web Services Composing Webpage Design Weighing Method Wiener Filter WIFI Wind Driven Generator Wind Power Wind Power System Wind Tunnel Testings Wireless Communication Wireless Power Transmission Wireless Sensor Network (WSN) Wireless Transceiver Wooden Patterns 402 616 490 713 986 986 1003 861 998 480 342 188 547 649, 669 241 532 782 100 877 936 606 X XML 903 Y YUV Color Space 374 1078 Mechatronics and Industrial Informatics II Z Zero-Pole Point ZigBee 594 188, 773 A Ai, C.J Ai, S.M An, X.Y 598 457 664, 669 B Bai, J Bai, X Bao, J Bi, D.Z 565 394 625 674 C Cai, S.Y Cao, X.H Cao, Y.L Chang, Z Che, L Che, Z Chen, B.Y Chen, G.C Chen, G.M Chen, G.Y Chen, H.H Chen, J Chen, J.G Chen, J.X Chen, J.Y Chen, L Chen, L.N Chen, N Chen, P.P Chen, S.M Chen, Y Chen, Y.W Chen, Z Chen, Z.W Cheng, D.B Cheng, D.L Cheng, H.F Cheng, L.F 807 322 739 636 861 826 704 704 463 200 664, 669 27, 580 590 914 773 174 735 141 856 234 610 328 826 610, 981 12 640 188 682 D Dai, H.Y Dai, J.Y 188 251, 560 Dang, X.P Deng, S Deng, X.L Di, X.Q Ding, J Ding, Z.Q Dong, H.Y Dong, Q.L Dong, X Dong, Y Du, J.Y Du, R.X Du, Z.C 594 259 457 833 788 79 631 346 565 760 245, 271 83 807 E Engouang, T.D 519 F Fan, D.W Fan, G.C Fan, L.T Fan, L.Y Fang, H.T Fang, Y.Z Fen, P.X Feng, Q.B Feng, Z.R 468 659 532 755 83 1040 536 442 616 G Gai, Q.L Gao, H.B Gao, J Gao, L Gao, Q Gao, X Gao, Y.F Gao, Z.G Geng, G.Q Gong, W Guan, Z.C Guo, D.L Guo, F.Y Guo, J.Q Guo, Y.P 374 755 598 807 12 936 659, 713 735 751 484 196 230 696 653 437 1080 Mechatronics and Industrial Informatics II H Han, B.B Han, J Han, L Han, Q.B Han, T Han, W.M Han, X Hao, D.J Hao, F.L He, C He, H.N He, K He, Q.P He, S He, X.F He, X.L He, Y He, Z He, Z.B He, Z.L Hou, T Hou, Y.B Hu, J.F Hu, L.Z Hu, Q.X Huang, G Huang, G.M Huang, H.B Huang, S.Q Huang, X Huang, X.Y Huang, Y Huang, Y.H Hui, Y.B 696 271 649 704 427 1034 580 576 505 664, 669 610 83 723 365 826 110 200 704 457 468 245 90 816 234 388 104 259 72 131 505 365 422 620 J Ji, L Jia, X.F Jiang, H Jiang, H.W Jiang, J.Y Jiang, T.H Jiang, Y Jiang, Z.C Jiao, L.B Jiao, X Jie, B.H 52, 709 47, 110 7, 17 966 56 951 560 773 322 498 427 Jin, H Jin, Y Jing, C.L Ju, L.Y Jun, D Jun, L 127 719 442 17 131 333 K Kang, B.S Kong, X.Z Kuang, G.J Kun, M.H 398 602 966 39 L Lan, M.Y Lee, S.D Lei, J.H Li, B Li, B.H Li, B.S Li, D Li, G Li, G.J Li, G.N Li, H.X Li, J.Y Li, L Li, L.G Li, M Li, N.K Li, Q Li, S.G Li, T Li, X Li, X.K Li, X.L Li, X.Q Li, X.T Li, X.Y Li, Y.G Li, Y.H Li, Y.K Li, Y.P Li, Y.Q Li, Y.W Li, Y.X Li, Z 807 773, 936 540 188, 729, 743 43, 723 90 971 674 192 631 888 664, 669 174, 788 1022 729, 743 640 183, 547, 766, 873, 877, 903, 1044 406 402 669 990 292, 883 572 32 463 649 67, 100, 682 760 280 861 861 422 39 Applied Mechanics and Materials Vol 596 Li, Z.F Li, Z.H Li, Z.X Liang, W.H Liang, X.Y Liang, Y.Q Liao, Z.C Lin, J Lin, Z.G Lin, Z.Z Liu, B.X Liu, C Liu, F Liu, G Liu, G.G Liu, H.B Liu, J Liu, J.C Liu, J.G Liu, J.J Liu, L Liu, L.C Liu, L.F Liu, L.T Liu, M.Z Liu, N Liu, Q.Q Liu, S Liu, S.M Liu, W Liu, W.H Liu, W.Q Liu, X.C Liu, X.L Liu, X.Q Liu, X.Y Liu, Y Liu, Y.F Liu, Y.L Liu, Y.Q Liu, Z Liu, Z.F Liu, Z.J Lu, L Lu, P Lu, S.Q Lu, Y Luan, Q.L Luo, B 72 230 7, 17, 704 280 196 342 350 782 350 149 422 226 384 852 297, 301, 305 565 664, 669 183, 903 12 788 131 328 131 370 490 1030 1026, 1052 560 803 271, 799 936 723 971 67, 100 803 511, 519, 877 873 337, 899 280 43 1040 169 606 640 565 119 610 94 Luo, B.N Luo, D.C Luo, Q Luo, W.B Luo, W.J Luo, Y.H Luo, Y.J Lv, B.J Lv, G.Q Lv, Z 1081 856 873 944 868 960 826 847 27 442 164 M Ma, B Ma, C.X Ma, W.B Ma, Y Ma, Y.P Ma, Z.L Maimaiti, R.Z.W Marcek, D Meng, M Miao, D.S Miao, Y Miao, Z.M Min, L Ming, Z.L 951 807 259 826 951 747 160 678 811 83 123 100 39 N Nie, S Nie, S.Y Niu, H.X Niu, Q.F 807 453 468 620 O Ouyang, H 760 P Pan, J.L Pan, X.H Pan, Y Pang, H Pang, X.F Pei, Z.Q Peng, C Peng, L Ping, H 402 276 625 47 822 442 251 552 100 1082 Mechatronics and Industrial Informatics II Sun, Y Sun, Z.C Q Qi, C.X Qi, L Qi, X.L Qian, B Qian, J Qin, X.L Qin, Z.J Qiu, W.R Qiu, X.L Qu, D.W Qu, L.D 346, 923 511 807 1018 888 280 773 286 417 755 833 R Ran, T.B Rao, C.J Ren, Q.G Ren, Y.H Rong, X.K 222 1030, 1056 704 209 760 S Shang, L Shao, M.L Shao, Z.Z Shen, R Shi, G Shi, J.X Shi, X.L Shi, X.M Shu, S.H Shu, Y.F Song, C.F Song, G.C Song, J.B Song, J.S Song, Q.D Song, Z.G Su, Y Sun, H.F Sun, H.P Sun, L.N Sun, P Sun, Q.M Sun, R Sun, S.C Sun, W.H Sun, X 119 931 782 476 640 472 572 12 149 60 245 437 379 484 280 442 72 1060 735 1026, 1052 192 590 843, 868 32 311 472 494 914 T Tan, Z.L Tang, D.D Tang, G.X Tang, L Tang, X.L Tang, Y.B Tian, G.S Tian, S Tian, S.B Tian, X.D Tian, Y.Y Tong, Y 136 141 427 154 136 704 927 484 484 960 32 322 W Wang, B Wang, C Wang, C.S Wang, G Wang, G.M Wang, G.P Wang, G.Q Wang, H Wang, H.J Wang, H.P Wang, J.Q Wang, K Wang, L Wang, L.C Wang, N Wang, Q Wang, T.M Wang, X.H Wang, X.J Wang, X.P Wang, Y Wang, Y.G Wang, Y.H Wang, Y.J Wang, Y.N Wang, Y.P Wang, Y.Q Wang, Y.X Wang, Z.M Wang, Z.T 490, 704, 903 297, 301, 305, 511, 692 251 892 816 413 374 43, 687, 723 1060 511 174 594 620, 674 433 687 417, 417 417 788, 1009 990 433 350, 602, 696 620, 1022 286 204 316 888 433 174 123 234 Applied Mechanics and Materials Vol 596 Wang, Z.Y Wei, C.F Wei, Q.S Wei, Z Wu, B Wu, F Wu, G.C Wu, G.J Wu, H Wu, H.H Wu, J Wu, L Wu, Q Wu, W.Q Wu, X.D Wu, X.S Wu, Y.X Wu, Z.F Wu, Z.H 1022 572 826 476 3, 209, 994 123 816 799 427 463 1034 204 704 856 422 222 664, 669 216 552 X Xi, L Xiang, Q Xiao, Q.Y Xiao, S.W Xie, C Xie, H Xie, H.Y Xie, Y.H Xin, Z Xing, A.H Xing, J.F Xing, N.Z Xing, Y.Y Xiong, X.M Xiong, Y Xu, G.G Xu, G.H Xu, H.L Xu, J.G Xu, L Xu, S.H Xu, X Xu, Y.T Xu, Z.Y Xue, D.H Xue, J.W 682 230 552 692 119 598 200 986 1003 402 27 653 355 337, 899 437 505 682 631 584 370 1013 7, 17 234 449 687 1013 1083 Y Yan, C.K Yan, H.W Yan, H.Y Yan, L Yan, L.W Yan, M Yan, Y.H Yan, Z.C Yang, A.M Yang, B Yang, B.H Yang, B.J Yang, C.Q Yang, F.Q Yang, G.L Yang, H.M Yang, H.W Yang, H.Y Yang, J.F Yang, J.J Yang, J.N Yang, L Yang, L.M Yang, S Yang, S.S Yang, W Yang, W.X Yang, Z.B Yang, Z.S Yang, Z.W Yao, C Yao, G Yao, X.F Ye, L Yi, W Yiming, A.L.M.J Yin, L.F Yin, T Yin, X.J Yin, Y.Z You, Q You, X.D You, Z.F Yu, B Yu, H.Y Yu, J Yu, J.W 204 659, 713 713 576 598 342 402 536 263 394 528 251 453, 480 355 442 833 811 449 877 873 263 463 476 413 998 723 413 739 39 719 704 123 127 94, 280, 379 719 747 251 297, 301, 305 584, 782 704 47 944 1040 355, 909 833 32 490 1084 Yu, L Yu, R Yu, R.F Yu, T Yu, X.M Yu, Y.Y Yuan, F Yuan, J Yuan, J.Y Yuan, Y.N Mechatronics and Industrial Informatics II 1056 653 773 682 528 1013 960 498 678 Z Zang, F.Y Zeng, H.C Zeng, R.H Zeng, W Zeng, Z.B Zeng, Z.P Zhang, A.H Zhang, B.J Zhang, C.S Zhang, C.Y Zhang, H Zhang, H.B Zhang, H.Y Zhang, J Zhang, J.G Zhang, K Zhang, L Zhang, L.C Zhang, L.D Zhang, L.Z Zhang, M.J Zhang, N.L Zhang, P Zhang, Q Zhang, Q.M Zhang, Q.Y Zhang, R Zhang, S.G Zhang, S.H Zhang, S.L Zhang, W.Y Zhang, X Zhang, X.C Zhang, X.W Zhang, Y.B Zhang, Y.H Zhang, Y.N 602 480 811 936 794 476 838 936 674, 994 576 384 60, 1018 127, 328 12 755 674, 1009 927 606 664 398 12 192 379 141 856 794 594 241, 700 394 976 944 636 909 572 498 192 Zhang, Y.S Zhang, Z.H Zhang, Z.J Zhao, B Zhao, B.T Zhao, D.F Zhao, D.P Zhao, H Zhao, J.K Zhao, J.W Zhao, L Zhao, M Zhao, Q Zhao, T.T Zhao, X.E Zhao, X.Q Zhao, Y.J Zhao, Z.H Zhao, Z.J Zheng, H.Y Zheng, N.Z Zheng, Q.X Zheng, S Zheng, X.L Zheng, Y.L Zheng, Y.Y Zhong, K.H Zhong, Y.Y Zhong, Z.S Zhong, Z.X Zhou, H.F Zhou, H.Y Zhou, J Zhou, J.B Zhou, J.C Zhou, P Zhou, X.Z Zhou, Y.M Zhou, Z.H Zhou, Z.M Zhu, C.P Zhu, H.P Zhu, P.S Zhu, S.H Zhu, W.K Zhu, Y Zhu, Y.J Zhu, Y.L Zhu, Z.W 442 394 519 877 110 1040 200 472 760 494 346 877 788 1060 918 1048 271 209 169 449 811 788 365 664, 669 179 47 328 498 43 472 547 114 361 463 498 1065 476 263 640 83 704 636 803 22 463 22 528 659, 713 914 Applied Mechanics and Materials Vol 596 Zou, X.J 944 1085