The purpose of this manual is to provide direction on how to measure adidas products. The information provided in this manual is meant to provide a basis for measuring and does not reflect every case or possibility.When a special case arises, the pattern maker will provide detailed information to the factory regarding how to measure.
4.1.3_HOW TO MEASURE GARMENTS VALID FOR CREATION CENTERS: CCH / CCP / CCS / CCT / REEBOK MANUAL UPDATES DATE YYYY/MM/DD NAME SLIDE UPDATES 2012/07/10 Manuela Christ 26-28 • added additional information into description related to HPS 2013/03/12 Manuela Christ 30, 38, 57, 59 • updated description and added picture for hood • updated description for set in to match with BP and Standard Logo position and gave additional information • added additional description for minimum measurement and maximum w/b width stretched • updated description and deleted picture 2013/03/19 Stephanie Obieglo 26, 29, 32 • added slide 26 for armhole measurement with rib • updated slide 29 for front neck drop measurement, pictures added • updated slide 32 and added pictures for better understanding for finished neck opening meas Polo with stand and hoody 2013/05/25 Stephanie Obieglo different • updated slides, which were requested 2013/08/20 Stephanie Obieglo 16 • added slide for chest/ waist width with pleat 2013/08/21 Stephanie Obieglo 121, 124, 125, 139, 140 • Swim wear: updated front hip width (124/ 125), added slide 139/ 140 for waist and hip width 2013/08/26 Stephanie Obieglo 20, 34, 86 • added slides with information for „front to back“ meas for back length, sleeve length and leg hem; formerly called „drop tail“ 4.1.3_How to measure garments MANUAL UPDATES DATE YYYY/MM/DD NAME SLIDE UPDATES 2014/01/27 Nadine Greenhalgh 95 97 76 79 • • • • 2014/04/10 Anne Huhmann 114 • changed picture of meas front/back neck drop 2015/05/06 A.Freudenberger 80,82, 86,91 • added hip measurement for pants with big front /back difference • added slides for split shorts 2015/06/11 A.Freudenberger 68 • deleted „ for asian bra top only “ because it is relevant for all 2016/09/20 A.Freudenberger 42 100 101 • • • • 2016/12/07 A.Freudenberger 83,88,93 • added slides for preshaped tights and split short 2017/02/09 A.Freudenberger 82/83,87/88 • added meas.especially for running split shorts,changed back to former way to measure for all others added new picture and description for functional pocket opening amended descripton of meas an inner brief changed sentence of wb width stretched put in hip width meas., meas with 3-Stripes changed picture of meas.min neck opening stretched changed picture of meas.inner brief length changed picture of meas.inner brief side seam length changed to new layout 4.1.3_HOW TO MEASURE GARMENTS 2012/07/10 Content Page Manuals updates 2-3 General information 5-7 How to measure tops and bras - 67 How to measure bottoms ,pockets and logos 68 - 108 How to measure skirts and dresses 109 - 127 How to measure swim wear and under wire bras 126 - 154 4.1.3_HOW TO MEASURE GARMENTS 2012/07/10 GENERAL INFORMATION The purpose of this manual is to provide direction on how to measure adidas products The information provided in this manual is meant to provide a basis for measuring and does not reflect every case or possibility When a special case arises, the pattern maker will provide detailed information to the factory regarding how to measure For example, if there is a side insert and there is no “true” underarm point, it is difficult to use the standard “2.0 cm below the armhole” measurement In this case, the pattern maker will provide a measurement distance from HPS If nothing is provided in the spec, then the factory should contact the pattern maker with a suggestion It is important that the factory and the pattern maker work together on finding the best solution for measuring special cases 4.1.3_HOW TO MEASURE GARMENTS 2012/07/10 IMPORTANT: ACCURATE MEASURING It is very important that garments are measured correctly If a garment is not correctly measured, this can negatively affect fitting and the adjustments made: •For example: a garment has a hem width in meas.set of 110.0 cm The garment is incorrectly measured at 108.0 cm but the garment actually measures true to the meas.set at 110.0 cm During the fit session, it is decided that the garment is too big at the hem opening The Pattern Maker makes an adjustment (believing that the garment measures 108.0 cm) and adjusts the meas.set to 106.0 cm The factory makes this adjustment and the next sample is too small If the garment had been measured correctly, the Pattern Maker would have made the correct meas.set adjustments Now the Pattern Maker will have to adjust the hem opening again to achieve the correct fit •ACCURATE MEASURING IS CRITICAL! 4.1.3_HOW TO MEASURE GARMENTS 2012/07/10 BENEFIT OF ACCURATE MEASURING •Adjustments/pattern changes made during the fittings are correct •Fewer pattern changes are required throughout the development process •Garments can be FIT APPROVED faster 4.1.3_HOW TO MEASURE GARMENTS 2012/07/10 HOW TO MEASURE TOPS AND BRAS 2012/07/10 GENERAL MEASURING INFORMATION • front and back has to be precisely matched at lower armhole before any measurement can be taken • measurement has to be multiplied by two • bindings are included in measurements, neckribs or armhole ribs aren´t included • for padded jackets all measurements should be taken with measuring tape flat (without pressure applied) 4.1.3_HOW TO MEASURE GARMENTS 2012/07/10 Content Page How to measure tops – 64 How to measure bras 65 - 67 4.1.3_HOW TO MEASURE GARMENTS 2012/07/10 10