confirm that the tetra element was integrated in the correct region on the chromosome
Measurement of Color, Gloss, and Translucency of White Salted Noodles- Effects of Water Addition and Vacuum Mixing.pdf
... Addition Water addition with a conventional pin mixer with no vacuum applied was 30 and 35%; with vacuum mixing it was 35 and 38% The aim in using the experimental vacuum mixing equipment was to ... Noodles The time for boiling the thin WSN was determined by sensory evaluation to assess the disappearance of the uncooked noodle core The time for boiling of thick WSN (udon) was determined by ... Addition and Vacuum Mixing on Thick WSN Characteristics in Experiment The assessment of boiled noodle appearance and texture relies on the noodles being in the best possible condition after cooking...
- 7
- 660
- 0
The measurement of spasticity
... (Bohannon & Smith, 1987) No increase in tone Slight increase in tone giving a catch when the limb was moved in flexion or extension No increase in muscle tone Slight increase in muscle tone, manifested ... under the in uence of gravity Research on the reliability of describing the quality of the muscle reaction and the angle of the muscle reaction is patchy There is more focus on the angle of the ... that increase in tendon jerk is not exclusive to spasticity Furthermore, whether the increase in the tendon jerk response is related to increased gain, decreased threshold or a combination of...
- 15
- 515
- 0
Measurement of the underlying event in the Drell–Yan process in proton–proton collisions at √ s =7 TeV pptx
... higher in the transverse region than the to- activity in the transverse region is the same as that in the towards region Figure presents the ratios of the predictions of various MC models to the ... [34] in the calorimeter and tracker originating from additional inelastic pp interactions (pile-up) in the same bunch crossing as the DY interaction .The calculation of takes into account the ... are corrected using a bin-by-bin technique In the bin-by-bin technique, the correction factor is calculated by taking the bin-by-bin ratio of the particle level and detector level distributions...
- 24
- 493
- 0
Báo cáo khoa học: "Automatic Measurement of Syntactic Development in Child Language" docx
... (HUMAN) was 3.3 (the range of HUMAN scores on the data was 21-91) There was no clear trend on whether the difference was positive or negative In some cases, the automated scores were higher, in other ... • Whether the dependent comes before or after the head in the sentence; • How many words apart the dependent is from the head; • The label of the lowest node in the constituent tree that includes ... from a very different domain than the one of the data used to train the statistical parser (the Wall Street Journal section of the Penn Treebank), but the degradation in the parser’s accuracy is...
- 8
- 580
- 0
Measurement of Organic Chemical Refractive Indexes Using an Optical Time-Domain Reflectometer docx
... x is the position relative to input end in the fiber, v the group velocity of the pulse, s the light-scattering coefficient, f the fraction of scattered light captured at the input end, c the ... the corresponding points Pfluctuation is the OTDR power level fluctuation Thus, in our case, the fluctuation of our estimated RI is 6.5234 × 10−4 If we take the fluctuation value in the all curve ... to 0.003 Besides, the OTDR only gives accuracy of the second digit after the decimal point (the third digit after the decimal points is for estimation), the accuracy limit of the OTDR is 0.01...
- 8
- 499
- 0
Electrical conductivity measurement of silicon wire prepared by CVD
... V The result of Fig seems to be caused by the effect of surface oxide surrounding the silicon core Then, the applied current increased, resulting in the melting of the end of the SiNW contacting ... contacting the tungsten probe In Fig 4b, the features of the contacts of the fused SiNW on the two tungsten probes are shown It is evident that the end of the SiNW contacting the probe was melted ... tip is considered to be negligibly small The length of the SiNW between the two probes was 38.6 lm The I–V relation was then measured The linear relation was obtained as shown in Fig The slope...
- 5
- 440
- 0
measurement of the pore sizes for anodic aluminum oxide (aao)
... and the solution temperature was maintained at °C during electropolishing After electropolishing, the first step anodization was carried out in a 0.3 M oxalic acid solution for more than h The ... etched in all directions at nearly the same rate, but it was found in many tests that the etching rate of the top surface of AAO was much slower than the rate of the pore side wall, as shown in dashed ... Finally, porous-type AAO films were obtained by the subsequent second anodization under the same condition as in the first step After AAO films are fabricated, the pores are widened by etching in...
- 5
- 490
- 1
In this issue: Fair value measurement of financial assets and financial liabilities pdf
... from the fund’s sponsor From the perspective of the holder, the individual unit may be the combined instrument containing both the amount due from the investment fund and the guarantee From the investment ... participant on the assumption that the non-performance risk, including the effect of the entity’s own credit risk, remains the same before and after the transfer In addition, in the absence of ... with the definitions in IFRS 13 Under the amended IAS 39 guidance, the initial measurement of the financial instrument is based on fair value as defined in IFRS 13, but the carrying amount of the...
- 33
- 498
- 0
MEASUREMENT OF ATMOSPHERIC DEPOSITION UNDER FOREST CANOPIES: SOME RECOMMENDATIONS FOR EQUIPMENT AND SAMPLING DESIGN docx
... differentiate between the origin of the elements reaching the forest floor, but parallel sampling of the incident precipitation in the open field or above the forest canopy helps discriminate the in uence of ... capacity containers The volume of the vessel connected to the funnel or to the trough should be large enough to contain the maximum precipitation amount expected at the sampling location during the ... of conditions prevailing at the study sites or during the period of investigation (climate, local sources of contamination, and measures adopted to improve sample conservation in the field) The...
- 35
- 411
- 0
IN THIS ISSUE: PRESENTATION AND MEASUREMENT OF FINANCIAL ASSETS CARRIED AT FAIR VALUE potx
... currency of denomination of the instrument Interest income is recorded in the functional currency at the rate of exchange at the date of the transaction, or at rates that approximate the actual exchange ... cost in the foreign currency at the end of the period translated into the functional currency at the spot exchange rate at that date; and amortised cost in the functional currency at the beginning ... for Investment Funds | Other gains and losses in the functional currency include the change in fair value in the foreign currency as well as the foreign exchange gain or loss on re-translation...
- 15
- 402
- 0
SURVEY MEASUREMENT OF WORK DISABILITY docx
... communication of the response In addition, the encoding of information, a process outside the control of the survey interview, determines a priori whether the information of interest is available for the ... conditions.” In addition to the sample design and the wording of individual questions and response options, these decisions include the following: • whether to use interviewers or to collect information ... dimensions and severity of disability These include (a) the individual’s definition of the situation and reactions, which at times compound the limitations; (b) the definition of the situation by others,...
- 110
- 281
- 0
measurement of in plane thermal conductivity of ultrathin films using micro raman spectroscopy
... neglected in the cross-plane direction, the in- plane dimension should be much larger than the cross-plane dimension of the film In terms of measuring in- plane thermal conductivity of thin films, the ... that the grain size is roughly equal to the film thickness, which indicates that in the thinner films the grain boundaries were more densely distributed in the lateral direction In these Bi films, the ... disorders at the grain boundaries act as phonon scattering sites and therefore reduce the lattice in- plane thermal conductivity together with phonon surface/interface boundary scattering Surprisingly,...
- 13
- 422
- 0
measurement of metalcarbon nanotube contact resistance by adjusting contact length using laser ablation
... original contact length was measured to be 12.6 ± 0.1 μm Following the fifth cut, only ∼2.5 μm of the contact remained The resistance was observed to continuously increase due to ever smaller contact ... were constrained to low bias conditions (|V | 0.1 V) Under these conditions, the measured I (V ) was found to be linear The total resistance of the sample was reliably determined from the slope ... The laser machining system is equipped with an in- line vision system which allows laser cutting at the desired location on the CNT The laser pulses are focused onto the sample using a 100× microscope...
- 7
- 425
- 0
measurement of solid liquid interface temperature during pulsed excimer laser melting of polycrystalline silicon films
... using the transient conductance method The transient melting depth was calculated using a heat conduction model which incorporates a melting front tracking algorithm and the interface response ... shows thermal emission signals at the wavelength of 1.5 m The thermal emission measurement also yields the melting duration ͑indicated by arrows͒, since only liquid silicon emits light in the ... silicon upon melting The melting durations measured by surface reflectance are in close agreement with those obtained from thermal emission measurement Considering that any possible thermal emission...
- 3
- 170
- 0
materials forum measurement of residual stresses in joints
... measurements in the clusters is described The results are considered in relation to the fatigue performance of the connections with and without PWHT After the root bead, the welding on these clusters ... diameter) is then made into the component through the centre of the rosette The production of the hole in the stressed component causes a redistribution of strains to occur near the hole, which ... specimen The hole drilling method involves the application of a special three -element strain gage rosette (as shown in Figure 7) onto the surface of the component at the measurement location A small...
- 9
- 385
- 0
Measurement of enzymatic browning
... with a control representing the same plug This was done by using half-plugs, one half receiving the treatment and the same surface on the other half serving as its control Variation in cut apple ... degree of browning could be seen along the length of the bore hole remaining in the fruit half after removal of a plug, indicating that the exact location of the transverse cut probably was not critical ... or deviations from linearity in the reflectance curves may be indicative of the depletion of endogenous browning inhibitors such as ascorbic acid prior to the onset of browning (Ponting and Joslyn,...
- 5
- 546
- 0
ultrasonic measurement of residual stresses
... relaxation in the welded panel under the action of cyclic loading confirmed the fact that within the interval of applied stress ranges corresponding to the multi-cycle region of loading of the welded ... decrease of the stress range there is corresponding increase of the influence of the welding RS on the fatigue life of welded joint Fig.1 Fatigue curves of butt welded joint in low-carbon steel: ... A Study on Residual Stress Distribution and Relaxation in Welded Components, in: Proceedings of the 20th International Offshore and Polar Engineering Conference ISOPE-2010, Beijing, China June...
- 8
- 294
- 1
Báo cáo sinh học: "Measurement of metabolic tumour volume: static versus dynamic FDG scans" potx
... signal-to-background-corrected delineation methods are used This finding is in line with previous studies reporting on test-retest variability using various tumor delineation methods [10, 21] that confirmed that ... images Competing interests The authors declare that they have no competing interests Authors' contributions PC performed the data analysis and data interpretation and was the main author of the manuscript ... assessment using positron-emission tomography [PET] may be of interest for both target volume definition in radiotherapy and monitoring response to therapy It has been reported, however, that metabolic...
- 16
- 379
- 0
báo cáo hóa học: "Ambulatory measurement of knee motion and physical activity: preliminary evaluation of a smart activity monitor" pdf
... with the hips and knees in 90° of flexion and the ankles in neutral dorsiflexion The proper electrogoniometer position was again confirmed by a conventional goniometer Small differences in time ... during a day in the operating theatre The other orthopaedic surgeon wore the device while seeing patients in clinic The BML researchers spent the majority of their data collection period working ... Hypoallergenic adhesive tape was used to secure the sensors to the skin Each sensor was placed with the proper side against the skin and in line with the longitudinal axis of the body segment Output...
- 10
- 378
- 0
Tìm thêm: hệ việt nam nhật bản và sức hấp dẫn của tiếng nhật tại việt nam khảo sát chương trình đào tạo của các đơn vị đào tạo tại nhật bản khảo sát chương trình đào tạo gắn với các giáo trình cụ thể xác định thời lượng học về mặt lí thuyết và thực tế điều tra với đối tượng sinh viên học tiếng nhật không chuyên ngữ1 khảo sát thực tế giảng dạy tiếng nhật không chuyên ngữ tại việt nam nội dung cụ thể cho từng kĩ năng ở từng cấp độ xác định mức độ đáp ứng về văn hoá và chuyên môn trong ct mở máy động cơ rôto dây quấn các đặc tính của động cơ điện không đồng bộ hệ số công suất cosp fi p2 đặc tuyến hiệu suất h fi p2 đặc tuyến mômen quay m fi p2 đặc tuyến tốc độ rôto n fi p2 động cơ điện không đồng bộ một pha sự cần thiết phải đầu tư xây dựng nhà máy thông tin liên lạc và các dịch vụ phần 3 giới thiệu nguyên liệu từ bảng 3 1 ta thấy ngoài hai thành phần chủ yếu và chiếm tỷ lệ cao nhất là tinh bột và cacbonhydrat trong hạt gạo tẻ còn chứa đường cellulose hemicellulose chỉ tiêu chất lượng 9 tr 25