| Tài liệu tham khảo |
Loại |
Chi tiết |
| [1] G.S. Settles and S. Garg, Redesigning blasting nozzles to improve productivity, J. of Protective Coatings and Linings, vol. No. 10, pp. 64-72,1996 |
Sách, tạp chí |
| Tiêu đề: |
J. of Protective Coatings and Linings |
|
| [2] G.S. Settles and S. Garg, A Scientific view of the productivity of abrasive blasting nozzles, Research News, vol.12, No. 4, pp. 101-102, 1995 |
Sách, tạp chí |
|
| [3] Béla G. Lipták, Flow measurement, CRC Press, vol.27, pp. 172-180, 1993 |
Sách, tạp chí |
|
| [6] S. M. Yahya, Fundamentals of Compressible Flow: SI Units with Aircraft and Rocket Propulsion, New Age International, Part 1, vol. 4, pp.91-112, 2003 |
Sách, tạp chí |
| Tiêu đề: |
New Age International |
|
| [9] M. Seavey, Abrasive blasting above 100 psi, J. of Protective Coatings and Linings, pp. 26-37, 1985 |
Sách, tạp chí |
| Tiêu đề: |
J. of Protective Coatings and Linings |
|
| [10] Frank E. M, Nozzle Contours for Minimum Particle-Lag Loss, AIAA Journal, vol.1, No.12, pp. 2793-2801, 1963 |
Sách, tạp chí |
|
| [11] Balasubramanyam .S, M.K and S W, Simulation of flow through supersonic cruise nozzle, Thermal & Fluids Analysis Workshop TFAWS 2011, August 15-19 2011 |
Sách, tạp chí |
| Tiêu đề: |
Thermal & Fluids Analysis Workshop TFAWS 2011 |
|
| [18] Achtsnick, M., Geelhoed, P.F., Hoogstrate, A.M., Karpuschewski, B., 2005, Modelling and evaluation of the micro abrasive blasting process. Wear, Vol. 259, pp.84–94 |
Sách, tạp chí |
|
| [19] Bae, H.J., Baek, J.J., Lee, C.S., Shin, C.S., Lee, B.H., Shin, S.R., Beak, K.K., Kim, K.S., 2007, Improvement of blasting productivity by optimizing blasting-related operation parameters. PACE 2007, Dallas, TX, February pp.11–14 |
Sách, tạp chí |
|
| [24] Verspui, M.A., With G., Dekkers, E.C., 1997, A crusher for single particle testing. Rev. Sci.Instrum., Vol. 63, No. 3, pp.1553–1556 |
Sách, tạp chí |
| Tiêu đề: |
Rev. "Sci.Instrum |
|
| [25] Huang, H., Zhu, X.H., Huang, Q.K., 1995, Weibull strength distributions and fracture characteristics of abrasive materials. Eng. Fracture Mech., Vol. 52, pp.15–24 |
Sách, tạp chí |
| Tiêu đề: |
Eng. Fracture Mech |
|
| [26] Wadell, H., 1933, Sphericity and roundness of rock particles. J. Geol., Vol. 41, 316–331 |
Sách, tạp chí |
|
| [28] Bahadur, S., Badruddin, R., 1990, Erodent particle characterization and the effect of particle size and shape on erosion. Wear, Vol. 138, pp.189–208 |
Sách, tạp chí |
|
| [29] Hansink, J.D., 1998, Economics of abrasive selection for shipyard use. Protect. Coat. Europe, Vol. 3, No. 5, 24–27 |
Sách, tạp chí |
| Tiêu đề: |
Protect. Coat. "Europe |
|
| [30] Gillespie, B., Fowler, D.B., 1991, Evaluation of size and shape of shot peening media by image analysis. SAE Trans., Vol. 100, No. 1, pp.28–39 |
Sách, tạp chí |
|
| [4] G.S. Settles, Patent abrasive blast cleaning nozzle, US 5975996 A, 1999 |
Khác |
|
| [5] Yy. Perng, Modeling fluid structure interaction, Company literature ANSYS Inc., 2011 |
Khác |
|
| [7] Suction abrasive blast tool, Company literature, CLEMCO, Washington, 1994 |
Khác |
|
| [8] Abrasive Blast Nozzles, Company literature Kennametal Inc., Latrobe, PA 15650, pp. 9- 12, 2012 |
Khác |
|
| [12] Material Properties Charts of Ceramic materials, Company literature CoorsTek Inc., Golden, CO, 2015 |
Khác |
|