Optical Distribution Frames (ODF)

Optical Distribution Frames (ODF) ADC’s family of Optical Distribution Frames (ODF) reflect our expertise in cable management with innovative products that ensure bend radius protection at every point in the frame application. High-density fiber frames, clear routing paths, slack storage solutions, easy connector access and simplified integration of optical components all optimize the value of the optical network. This product family stresses modularity and flexibility well suited for today’s fiber network and is capable of accommodating future growth. ADC is a market leading supplier and value producer of fiber access, termination and connectivity products designed to provide a full range of solutions for optical networks. Cable Type Panel Type NGF NG3 8" FCM LSX 72-Position Singlemode IFC Ribbon ¸ ¸ ¸ ¸ IFC Stranded ¸ ¸ ¸ ¸ 144-Position Singlemode IFC Ribbon ¸ ¸ ¸ ¸ IFC Stranded ¸ ¸ ¸ ¸ 216-Position Singlemode IFC Ribbon ¸ ¸ Connector Types 4 Singlemode Multimode SC Ultra Polish SC SC Angled Polish LC FC Ultra Polish LC Ultra Polish LC Angled Polish w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Cable Lengths (in meters) 1 16, 23, 31, 46, 61, 77, 92, 123, 153 Note: Non-standard cable lengths also available. Cable Lengths (in feet) 50, 75, 100, 150, 200, 250, 300, 400, 500 Panel Types Port Counts NGF 72, 144, 192 2 NG3 ® 72, 144 3 , 216 3 8" FCM 72, 144 LSX 72, 144, 216 1 Non-standard cable lengths, assemblies with connectors on both ends and non-standard cable types also available. 2 Uses LC small form factor connectors 3 Panels are only available pre-terminated 4 Non-standard connector types also available NGF Preterminated Fiber Termination Blocks (Preterminated with Multifiber IFC) Catalog Number NGF-TB __ __ __ __ __ __ __ __ __ __ __ Block Type 1 SC 2 FC 4 LC 1 Connector Type #2 Singlemode 0 No connector/stub end 7 SC ultra polish L SC angled polish 2 FC ultra polish K LC ultra polish (144 only) M LC angled polish Multimode (62.5/125 µm) 0 No connector/stub end 9 SC P LC (144 or 192 only) 6 Block Capacity B 72 C 96 M 144 1 Q 192 2 2 Block Orientation L Left R Right 3 Cable Exit Direction U Upward D Downward 4 Connector & Adapter Type #1 Singlemode 7 SC ultra polish L SC angled polish 2 FC ultra polish K LC ultra polish (144 and 192 only) M LC angled polish Multimode (62.5/125 µm) 9 SC P LC (144 or 192 only) 5 Standard Single-Ended Cable Length 016 16 m (50') 023 23 m (75') 031 31 m (100') 046 46 m (150') 061 61 m (200') 077 77 m (250') 092 92 m (300') 123 123 m (400') 153 153 m (500') Non-standard Cable Length Use XXX for non-standard length in meters 8 Cable Type 3 (IFC Riser) Singlemode ZB 72-fiber stranded KA 72-fiber ribbon ZC 96-fiber stranded EG 96-fiber ribbon ZD 144-fiber stranded FJ 144/fiber ribbon Multimode VM 72-fiber stranded 62.5/125 µm WM 96-fiber stranded 62.5/125 µm YM 144-fiber stranded 62.5/125 µm 7 1 144 blocks using block type 1 or 2 cannot be used in legacy 26" wide NGF frames. 2 LC only for 192 terminations. Other configurations are available upon request. Please contact ADC Technical Assistance Center. 3 Standard cable offering above will use Corning ® SMF28-e, Sumitomo, Alcatel or similar singlemode fiber based on current market availability. The information below represents one of ADC’s leading Optical Distribution Frame products, the NGF Preterminated IFC Fiber Block. This information is representative of ADC’s easier-to-understand ordering approach. See the Optical Distribution Frame catalog for additional information on this and other related products. w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 High-Density Frames Traditional Frames NGF (Leading) NG3 8-Inch FCM LSX (LGX Compatible) Recommended applications Medium to large fiber count applications. Highest fiber count solution available. Medium to large fiber count applications. GR-499-CORE, Issue 2 compliance. Small to medium fiber count applications. Best cable management solution in traditional FDF. Small to medium fiber count applications. Minimal cable management features. Lowest cost solution. Notes Proprietary high-density solution using 72-, 96-, 144- and 192-position blocks (FTB) Proprietary solution using 72-position panels up to 6 stacked (432 preterminations max.) Traditional footprint; 72-, 96-, and 144-position panels LGX ® * compatible; 72 and 96 position = 7", 144-position = 9" and 216-position = 10" Number of fibers, future growth potential 144 to 23,000 72 to 23,000 72 to 5,000 72 to 5,000 Interconnect Good Good Good Good Cross-connect Excellent Excellent Excellent Good, no rear cable management Accommodates on-frame splicing Good Good Very good Very good Accommodates off-frame splicing Excellent Excellent Very good Very good Rear access Must have full access to front and rear (front-facing frame available) Must have full access to front and rear Required. Has excellent rear cable management Must have full access to front and rear Density – terminations per frame 2304 terminations per 7' frame using LC connectors; 1728 terminations using standard connectors 1440 terminations per 7' frame 1152 terminations per 7' frame 1008 terminations per 7' frame Front access to rear connector Yes (via sliding adapter) Yes Yes (via removable angled retainer) No Connector access Sliding 6 pack Sliding 6 pack Angled retainer Straight adapter VAM capabilites Yes. Separate panel required Yes. Uses MicroVam. Separate panel required Yes. Separate panel required Yes Slack storage location On-frame (built-in IMP) On-frame (built-in IMP) IMP. Positive bend radius protection Utilizes drip loop method *LGX ® is a registered trademark of Furukawa Electric North America, Inc. w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Fiber Raceway Solu tions (FiberGuide ® ) Splice Vault Cable Entrance Solutions (FEC) High-Density FDF Lineup Solutions (NGF, NG3) Level 3 FL1000 Wall Box Plenum FiberGuide ® Level 2 FL2000 Wall Mount Panel Plenum FiberGuide Level 1 OMX 600 ® Fiber Distribution Frame Plenum FiberGuide VAMs Customer Premises FL1000 Wallbox FiberGuide Express Exit ™ Traditional FDF Lineup Solutions (8" FCM, LSX) Intermediate FDF Solutions (8" FCM) FL2000 Panel FiberGuide ® Flex Tubing RiserGuide Vertical FiberGuide FPL Panel FMT Panel Fiber Optic Transport Lineup Fiber Optic Panel Solutions (FOP) Fiber Cable Assembly & Connector Solutions (FCC) Value-Added Module (VAM) Solutions (Monitors, Splitters, WDM, CWDM) Central Office 24" 12" 12" 12" 6" 6" 6" 6" 6" 6" Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Web site. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 104075AE 2/07 Original © 2007 ADC Telecommunications, Inc. All Rights Reserved . Optical Distribution Frames (ODF) ADC’s family of Optical Distribution Frames (ODF) reflect our expertise in cable. application. High-density fiber frames, clear routing paths, slack storage solutions, easy connector access and simplified integration of optical components all