Tài liệu OMX600 Optical Distribution Frame pdf

5/07 • 103742AE Optical Distribution Frames www.adc.com • +1-952-938-8080 • 1-800-366-3891 OMX600 Optical Distribution Frame Introduction .94 Things to Consider When Ordering 96 Fiber Distributing Cabinets .97 Preterminated Fiber Termination Panels with Pigtails 98 Preterminated Fiber Termination Panels with Multifiber Cable-IFC 99 Adapter-Only Fiber Termination Panels .100 Splice Panels 101 Value-Added Module (VAM) Chassis 102 Jumper Storage Panel 103 Interbay Management Panel 103 Frame Installation Kit .103 End Guard .103 Splice Frame 104 Splice Tray 105 Cable Clamp 105 Standard Cross-Connect Patch Cord Lengths .106 Ordering Information for Patch Cords and Attenuators 106 5/07 • 103742AE Optical Distribution Frames 94 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Introduction Termination Panel The OMX600 termination panels are available with 72, 96 or 144 (with LC) adapters. These panels can be ordered with adapters only or preterminated with either intrafacility (IFC), outside plant (OSP) cables or pigtails for ease of installation. The panels are available with industry-standard connector/adapter styles. Splice Panel The OMX600 splice panel provides protection and a mounting location for ADC’s round splice trays. Each splice panel is two mounting positions tall and holds 24 splice trays. Each splice tray can house up to 24 splices. Storage Panel The storage panel enables storage of fiber-optic jumper slack within an OMX600 frame. Each jumper storage module is one module position tall. The interbay management panel provides off-frame storage of jumper slack. ADC recommends the use of 2.0 mm patch cords to maximize the cable management potential. Value-Added Module (VAM) Chassis Adding signal management and enhancement functions, such as splitters, couplers and wavelength division mulitplexers, optimizes the value of your fiber network, by providing nonintrusive access to the optical signal for monitoring and testing signal integrity. The OMX600 VAM chassis accommodates various splitter and WDM modules. ADC has developed the OMX600 ® optical distribution frame to meet today‘s network demands. Designed with total front access, the OMX600 has five right-hand and five left-hand mounting positions and can be installed back-to-back or against a wall to save valuable office floor space. This high-density frame terminates and splices up to 576 fibers in a 600 mm x 300 mm (23.6" x 11.8") footprint. Product Overview Recommended applications Medium to high fiber count applications. Limited floor space where versatility is a necessity Description Modular termination panels with splice and storage capability Number of fibers, future growth potential Termination panels 72, 96 and 144 (LC connectors only) Interconnect Excellent Cross-connect Good Accommodates on-frame splicing Excellent Accommodates off-frame splicing Yes (dedicated OMX splice frame also available) Rear access Not required Density – terminations per frame Up to 960 per frame Front access to rear connector Yes VAM capabilites Yes Slack storage location Within cabinet Connector access Excellent 5/07 • 103742AE Optical Distribution Frames 95 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Introduction Configurations The modular OMX600 ® product line can be configured to optimize the network. All OMX600 configurations listed below are completely front-facing, enabling wall-mount or back-to-back configurations. The OMX600 can be enclosed with lockable front doors and end guards for increased fiber protection and security. Configuration 1 Configuration 2 Configuration 3 Configuration 4 Configuration 1 576 terminations and 576 splices (using the 96-position panel) 432 terminations and 432 splices (using the 72-position panel) 2.14 m x 900 mm x 300 mm (7' x 35.4" x 11.8") Interconnect or cross-connect solution Includes two off-frame jumper storage panels Configuration 2 288 terminations and 288 splices (using the 96-position panel) 216 terminations and 216 splices (using the 72-position panel) 2.14 m mm x 600 mm x 300 mm (7' x 23.6" x 11.8") Interconnect solution On-frame jumper storage Other configurations are available upon request. Please contact ADC Technical Assistance Center. Configuration 4 576 terminations and 288 splices (using the 96-position panel) 432 terminations and 216 splices (using the 72-position panel) 2.14 m x 600 mm x 300 mm (7' x 23.6" x 11.8") Cross-connect solution On-frame jumper storage Configuration 3 480 terminations (using the 96-position panel) 360 terminations (using the 72-position panel) 2.14 m x 600 mm x 300 mm (7' x 23.6" x 11.8") Interconnect or cross-connect solution On-frame jumper storage 5/07 • 103742AE Optical Distribution Frames 96 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Things to Consider When Ordering How to Order Main Components of the OMX600 ® Frame Catalog Number Quantity 1) Select desired Frame - Fiber Distributing Cabinet - Page 97 ____________________ _______ - Splice Frame - Page 104 ____________________ _______ 2) Select desired Fiber Termination Panels - Preterminated Fiber Termination Panels with Pigtails - Page 98 ____________________ _______ - Preterminated Fiber Termination Panels with Multifiber Cable-IFC - Page 99 ____________________ _______ - Adapter-Only Fiber Termination Panels - Page 100 ____________________ _______ - Splice Panels - Page 101 ____________________ _______ Optional Equipment 3) Value-Added Module (VAM) Chassis - Page 102 ____________________ _______ 4) Jumper Storage Panel - Page 103 ____________________ _______ 5) Interbay Management Panel - Page 103 ____________________ _______ 6) Frame Installation Kit - Page 103 ____________________ _______ 7) End Guard - Page 103 ____________________ _______ 8) Splice Tray - Page 105 ____________________ _______ 9) Cable Clamp - Page 105 ____________________ _______ 10) Patch Cord - Pages 122–126* ____________________ _______ 11) In-Line Attenuator - Page 127 ____________________ _______ *See page 106 for standard cross-connect patch cord lengths. 5/07 • 103742AE Optical Distribution Frames 97 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Fiber Distributing Cabinets The OMX600 ® fiber distributing cabinet provides mounting locations for termination, splice and storage panels. It is a completely front-facing frame; all mounting, maintenance and cable access is done on the front of the frame. A lower trough allows multiple frames to be mounted in a continuous lineup. The frame is shipped with lockable front doors (locks ordered separately). Preconfigured frames are available. Catalog Number MX6-TSF6030-7Z4 Dimensions (HxWxD) 2.14 m x 600 mm x 300 mm (7' x 23.6" x 11.8") Ordering Information Description OMX600 seismic zone 4 rated fiber distributing cabinet Please contact ADC Technical Assistance Center to order a preconfigured OMX600 frame. Side View Front ISO View 600 mm (23.6") 300 mm (11.8") 300 mm (11.8") Front View 2.14 m (7') 5/07 • 103742AE Optical Distribution Frames 98 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Preterminated Fiber Termination Panels with Pigtails The OMX600 ® preterminated pigtail panels are available with either stranded or ribbon preterminated fiber bundles. The panels are mounted on the frame and the fiber bundles are then routed directly to the splice section of the OMX600 frame. This makes installation of the panels quick and easy, saving valuable installation time. Preterminated pigtail panels may be ordered with a ”left“ orientation (mounts on the left side of the frame) or a ”right“ orientation (mounts on the right side of the frame). ADC recommends the use of 2.0 mm patch cords to maximize the cable management potential of the OMX600. 96-Position Panel Catalog Number MX6-PM __ __ __ __ __ __ 0 Number of Pigtail Assemblies 06 For use with 72-position panel 08 For use with 96-position panel 12 For use with 144-position panel Panel Capacity A 72-position B 96-position C 144-position (LC only) Connector/Adapter Type Singlemode 7 SC ultra polish L SC angled polish 2 FC ultra polish K LC ultra polish M LC angled polish Multimode (62.5/125 μm) 9SC AFC PLC Pigtail Type 1 12-fiber stranded 3 12-fiber ribbon 4 8-fiber stranded 5 8-fiber ribbon 8 6-fiber stranded 6 6-fiber ribbon Block Orientation L Left R Right Other configurations are available upon request. Please contact ADC Technical Assistance Center. 5/07 • 103742AE Optical Distribution Frames 99 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Preterminated Fiber Termination Panels with Multifiber Cable – IFC The OMX600 ® preterminated panel is available with indoor rated intrafacility cable (IFC) in ribbon or stranded configurations. All panels are 100% factory tested to guarantee continuity and reliable connections. Preterminated panels make installation quick and easy, reducing labor costs. Panels may be ordered with a ”left“ orientation (mounts on the left side of the frame) or a ”right“ orientation (mounts on the right side of the frame). ADC recommends the use of 2.0 mm patch cords to maximize the cable management potential of the OMX600. 96-Position Termination Panel Catalog Number MX6-FM __ __ __ __ __ __ 0 __ __ __ Panel Capacity A 72-position B 96-position C 144-position (LC only) Connector and Adapter Type #1 Singlemode 7 SC ultra polish L SC angled polish 2 FC ultra polish K LC ultra polish (144 only) M LC angled polish (144 only) Multimode (62.5/125μm) 9SC P LC (144 only) 1 Panels using ADC ‘ s standard cable offering have a shorter lead time than panels using a specific cable manufacturer. ADC only provides GR-409 compliant cable that meets or exceeds our high quality standards. Connector Type #2 Singlemode 0 No connector/stub end 7 SC ultra polish L SC angled polish 2 FC ultra polish K LC ultra polish M LC angled polish Multimode (62.5/125 μm) 0 No connector/stub end 9SC PLC Cable Type (IFC Riser) Singlemode ZB 72-fiber stranded KA 72-fiber ribbon ZC 96-fiber stranded EF 96-fiber ribbon ZD 144-fiber stranded FK 144-fiber ribbon Multimode (62.5/125 μm) VM 72-fiber stranded WM 96-fiber stranded Block Orientation L Left R Right Cable Length 1 Standard Single-Ended 016 16 m (50') 023 23 m (75') 031 31 m (100') 046 46 m (150') 061 61 m (200') 077 77 m (250') 092 92 m (300') 122 122 m (400') 153 153 m (500') Non-Standard Use XXX for length in meters Other configurations are available upon request. Please contact ADC Technical Assistance Center. 5/07 • 103742AE Optical Distribution Frames 100 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Adapter-Only Fiber Termination Panels The OMX600 ® fiber termination panel with adapters only is available with 72-, 96- or 144- positions. Panels may be ordered with a ”left“ orientation (mounts on the left side of the frame) or a ”right“ orientation (mounts on the right side of the frame). ADC recommends the use of 2.0 mm patch cords to maximize the cable management potential of the OMX600. 72-Position Adapter-Only Fiber Termination Panel Catalog Number MX6-TM __ __ __ 00 Panel Capacity A 72-position B 96-position C 144-position (LC only) Connector and Adapter Type Singlemode 7 SC ultra polish L SC angled polish 2 FC ultra polish K LC ultra polish M LC angled polish Multimode (62.5/125 μm) 9SC PLC Other configurations are available upon request. Please contact ADC Technical Assistance Center. Block Orientation L Left R Right 5/07 • 103742AE Optical Distribution Frames 101 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Splice Panels The OMX600 ® splice panel provides mounting positions and protection for 24 splice trays. The splice panel is the height of two termination panels (30"). The module may be ordered with a ”left“ orientation (mounts on the left side of the frame) or a ”right“ orientation (mounts on the right side of the frame). Splice panels must be mounted to the frame starting in the bottom position. Catalog Number MX6-24SPNL-R MX6-24SPNL-L Ordering Information Description OMX600 splice panel accommodates 24 splice trays Right orientation Left orientation Splice Panel 5/07 • 103742AE Optical Distribution Frames 102 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Value-Added Module (VAM) Chassis Value-Added Module (VAM) System ADC offers an expansive line of monitor, splitter, WDM and CWDM VAM plug-in modules designed to meet all application needs. Please reference the Value-Added Module (VAM) System Catalog #101663AE for details at www.adc.com or contact ADC Customer Service. The OMX600 ® high-density VAM chassis is designed to fit into any open chassis location within new or existing OMX600 fiber distribution frames. Each chassis can accommodate a maximum of 18 high-density VAM plug-in modules, 18 bulkhead plates, 18 blank plates or any combination thereof. Ordering Information Description Dimensions (HxWxD) Catalog Number OMX600 high-density VAM chassis, unloaded - left orientation; accommodates up to 18 single OMX600 high-density modules 373 mm x 227 mm x 286 mm (14.7" x 8.9" x 11.3") MX6-HDVAMCHAS-L OMX600 high-density VAM chassis, unloaded - right orientation; accommodates up to 18 single OMX600 high-density modules 373 mm x 227 mm x 286 mm (14.7" x 8.9" x 11.3") MX6-HDVAMCHAS-R MX6-HDVAMCHAS-L (Left Orientation) MX6-HDVAMCHAS-R (Right Orientation) VAM Chassis (Right Orientation) [...]... (84" x 11.8") MX6-ENDGRD www.adc.com • +1-952-938-8080 • 1-800-366-3891 103 OMX600 Optical Distribution Frame Frame Accessories Splice Frame Optical Distribution Frames 2.14 m (7') 610 mm (24") Front View Front ISO View 305 mm (12") Side View • 103742AE Ordering Information Description Dimensions (HxWxD) Fully configured splice frame accommodates up to 1440 splices Catalog Number 2.14 m x 610 mm x 305... management Cabinet Solutions Optical Distribution Frames The OMX600 jumper storage panel provides for jumper storage functionality within the frame Up to five jumper storage panels can be mounted on one side of an OMX600 frame Jumper storage panels must be mounted to the frame starting in the bottom position panel is necessary when no jumper storage is provided on the OMX frame itself Ordering Information... vertical The frame is shipped with lockable front doors and may be ordered for applications in which the cables enter from above or below www.adc.com • +1-952-938-8080 • 1-800-366-3891 104 OMX600 Optical Distribution Frame Panel Accessories Splice Tray Catalog Number FST-DRS _ _ - _ _ Drawer Capacity Cabinet Solutions Optical Distribution Frames The round splice tray used in the OMX600 simplifies.. .OMX600 Optical Distribution Frame Frame Accessories Jumper Storage Panel 5/07 • 103742AE Ordering Information Description Dimensions (HxWxL) 368 mm x 127 mm x 248 mm (14.5" x 5" x 9.75") Jumper storage panel Catalog Number MX6-JSM00000 Interbay Management Panel The OMX600 interbay management panel provides slack storage between frames for interconnect or cross-connect... ADC Technical Assistance Center www.adc.com • +1-952-938-8080 • 1-800-366-3891 105 OMX600 Optical Distribution Frame Frame Accessories Standard Cross-Connect Patch Cord Lengths 6m 7m 7m 8m 8m (19.7') (23') (23') (26.2') (26.2') 9 m (29.5') For recommended cross-connect methods and installation instructions, refer to OMX600 user manual ADCP-93-084 Ordering Information for Patch Cords and Attenuators... M12 (2) 1.8 m (5.9") unistrut (1) anchor kit RAC-MX0616 RAC-MX0615 End Guard The OMX600 end guard provides protection for the fibers entering and exiting frames at the ends of a lineup The end guard attaches directly to the frame, but does not add to the overall frame width End guards are not required when ordering splice frames Ordering Information Description Dimensions (HxD) Catalog Number End guard... MX6-IMP150 Description Interbay management panel Frame Installation Kit Frame installation kits may be used on network frames and are seismic zone 4 rated Ordering Information Description Catalog Number Concrete floor frame installation kit, includes: (2) M8 bolts, 90 mm (3.5") (4) M8 nuts (8) flat washers (4) lock washers shims and anchor plates Raised floor frame installation kit, includes: (4) threaded... slack allowing the installer to roll the tray away from the frame to perform splicing Splice Type Empty 00 Bare fusion FT Heat shrink (single fiber fusion) HS Mechanical (mass fusion) MT 12 16 24 321 1 For 8-fiber ribbon only Cable Clamp The OMX600 cable clamp is used to secure the OSP/IFC cable to the base or top of the frame in a non-splice frame Ordering Information Catalog Number OSP/IFC cable clamp... detailed information For your convenience, ordering information for patch cords and attenuators can also be found on pages 122–127 • 103742AE Optical Distribution Frames 1 2 3 4 5 6 Approximate Patch Cord Length Meters (Feet) 5/07 Cabinet Solutions Number of Frames www.adc.com • +1-952-938-8080 • 1-800-366-3891 106 ... Number 2.14 m x 610 mm x 305 mm (7' x 24" x 12") Cable enters from underfloor MX6-SPL6030-A-D7Z4 Cable enters from top MX6-SPL6030-A-U7Z4 Splice frame cable clamps for OSP cable IFC cable FEC-ACCCLMP01 MX6-SPLIFCCLMP 5/07 Cabinet Solutions The OMX600 splice frame is a high-density splice solution, housing up to 1,440 splices within a 23.6- by 11.8-inch footprint Shipped complete with the necessary cable . 103742AE Optical Distribution Frames 104 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Frame Accessories. 103742AE Optical Distribution Frames 106 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Cabinet Solutions OMX600 ® Optical Distribution Frame Frame Accessories