OptEnet ™ Optical Extension Platform SPEC SHEET www.adc.com • +1-952-938-8080 • 1-800-366-3891 The ADC OptEnet ™ Optical Extension Platform is a carrier-class, intelligent, scalable platform capable of handling any network’s Ethernet or SONET media transitions. Bridging the gap between legacy copper infrastructures and fiber growth, the OptEnet platform provides the most economical evolution path. Integrated intelligence allows the user to remotely monitor system performance and transmit alarm conditions to upstream operational support systems. Leveraging ADC’s leadership in connectivity solutions, the OptEnet platform provides the ideal solution for Ethernet extensions in support of transparent LAN services or switch router interconnect requirements. A variety of solutions are supported ranging from 10Mb/s Ethernet, OC-12 and Gigabit Ethernet. Features and Benefits: • Ethernet delivery solution from central office to customer premises • Modular design enables line card diversity within the same chassis • Extend central office interconnect between network elements when distances are greater than 100 meters • Reduce capital expenses associated with expensive optical line cards in network elements • Supports multiple wavelength optical interfaces • Auto-negotiation features eliminate the need for optical line card upgrade in network elements • Redundant -48 VDC and +24 VDC power supplies • Supports SNMP, TL1 and Telnet communication protocols • Daisy-chain communication interfaces • Supports 10Base-T, 100Base-TX and 1000Base-T UTP conversion to fiber • Multimode fiber to singlemode fiber conversions • Medium Dependent Interface Cross-over (MDI-X) eliminates network collisions • NEBS Level 3, CE, UL and FCC standards compliant 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 6/06 • 101360AE OptEnet ™ Optical Extension Platform OptEnet ™ Optical Extension Platform Applications OE OE Ethernet Central Office Ethernet Central Office Demarc Demarc 100E 100E 10E OE OE OE Ethernet Central Office OE - OptEnet Optical Extension 10E - 10 Mbps Ethernet 100E - 100 Mbps Ethernet 1000E - GIG Ethernet OE Demarc 16TR 10E OE OE OE OE 1000E 1000E Fiber Network The OptEnet ™ platform can be utilized as the Ethernet delivery solution originating at a central office or remote site. RJ45 Patch Panel Network Element A Ethernet Switch RJ45 Patch Panel Ethernet Distribution Frame Network Element B Router OptEnet Optical Extension Fiber Panel OptEnet Optical Extension Electrical Ethernet distance limitation is 100 meters, yet the average central office cable distance can range from 8 km to 10 km. The OptEnet platform can be deployed as an intra-office extension to link network elements. With copper switch technology a fraction of the cost of optical switch technology, media conversion provides an incremental approach to providing increased bandwidth without upgrading active electronics. Point-to-Point Transparent LAN or Virtual LAN Services Ethernet Intrafacility Connectivity OptEnet ™ Optical Extension Platform Common Equipment 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 6/06 • 101360AE OptEnet ™ Optical Extension Platform OptEnet ™ Modular Chassis The OptEnet chassis is a modular chassis, which enables multiple types of line cards to be deployed simultaneously within the same chassis. Features: • Supports up to 12 or 14 OptEnet line cards in two rack units, with all front facing interfaces • Supports up to 4 OptEnet line cards in one rack unit • Accepts dual redundant power supplies • 19 inches wide with 23-inch reverse mounting ears • Optional SNMP, TL1 and/or alarm functionality Specifications PHYSICAL 14-Port Chassis Dimensions (HxWxD): 8.89 cm x 43.43 cm x 25.65 cm (3.5“ x17.1“ x10.1“) Weight (empty): 4.9 kg (10.7 lbs) 12-Port Chassis Dimensions (HxWxD): 8.89 cm x 44.45 cm x 12.0 cm (3.5“ x 17.5“ x 5.75“) Weight (empty): 3.86 kg (8.5 lbs) 4-Port Chassis Dimensions (HxWxD): 4.37 cm x 43.39 cm x 30.18 cm (1.72“ x 17.08“ x 9.67“) Weight (empty): 2.6 kg (5.7 lbs) ENVIRONMENTAL CHARACTERISTICS Operating Conditions: 5 ° to 40 ° C (-41 ° to 104 ° F) at 5% to 85% relative humidity Short Term Conditions: -5 ° to 50 ° C (23 ° to 122 ° F) at 5% to 90% relative humidity Storage Conditions: -40 ° to 70 ° C (-40 ° to 158 ° F) at 10% to 95% relative humidity (no condensation) Power Supply Modules The OptEnet chassis accepts power from DC sources. Dual power supplies are deployed within the chassis to provide redundant power to all line cards along the back plane. Features: • -48 VDC (50 W and 100 W) power supply versions • +24 VDC (100 W) power supply • Extended temperature versions available • Power connection on the front panel • Power and temperature status LEDs • Universal AC power supply Specifications ENVIRONMENTAL CHARACTERISTICS DC Input Voltage: -48 VDC, +24 VDC AC Input Voltage: 110 VAC to 240 VAC, 50-60 Hz OptEnet DC Power Supply Module OptEnet 12-Port Modular Chassis OptEnet 4-Port Modular Chassis OptEnet ™ Optical Extension Platform Common Equipment 4 www.adc.com • +1-952-938-8080 • 1-800-366-3891 6/06 • 101360AE OptEnet ™ Optical Extension Platform Communications Modules If remote monitoring is required, a central processor unit (CPU) can be deployed within the OptEnet ™ platform. An alarm card is available if only local alarm indications are required. The CPU and alarm card are optional. Only one of the two modules can be deployed in the chassis, so the network administrator must determine which alarm notification method is preferable. CPU Features: • Serial and Ethernet interface • SNMP, TL1 and Telnet communications protocols • Compatible with all SNMP management platforms • Daisy-chain up to four units, via one IP address • Firmware upgrade via TFTP or serial • Five simultaneous Telnet sessions Alarm Card Features: • Normally open and normally closed alarm contacts Specifications CONSTRUCTION CHARACTERISTICS CPU Ethernet Interface: 10Base-T, RJ45 connector COM IN Interface: RS-232 DCE, RJ45 connector COM OUT Interface: RS-232 DTE, RJ45 connector Communications Protocol: SNMP, TL1 and ASCII Alarm Module Power ON Indicator: Green Alarm Indicator: Red Contact Closures: Normally open and normally closed OptEnet CPU OptEnet Alarm Module OptEnet ™ Optical Extension Platform Optical Conversion Line Cards 5 www.adc.com • +1-952-938-8080 • 1-800-366-3891 6/06 • 101360AE OptEnet ™ Optical Extension Platform Singlemode to Singlemode Optical Regeneration Line Card The OptEnet ™ singlemode to singlemode optical regeneration line card is one of a family of line cards that can be deployed in the OptEnet modular chassis. The card is designed to regenerate optical signals transported over a singlemode link. The card supports any protocol and data rate between 10 Mb/s to 2.488 Gb/s (OC-48) Features: • Single circuit line card • Duplex transmission • Link status and power LED indications • SFP Optical Interfaces • Protocol independent • Supports data rates 10 Mb/s to 2.488 Gb/s Specifications ELECTRICAL Input Power: 1.3 Watts maximum; normal operation PHYSICAL Chassis Compatibility: OptEnet modular chassis Fiber Optic Connectors: LC (SFP module) Dimensions (HxWxD): 2.89 cm x 20.5 cm x 18.8 cm (1.14“ x 8.07“ x 7.4“) Weight: 122 g (0.27 lbs) OPTICAL PERFORMANCE OptEnet Singlemode to Singlemode Optical Converter Module Singlemode –15 km Range Singlemode – 40 km Range Wavelength: 1260 to 1360 nm range 1280 to 1335 nm range Output Optical Power (XMT): -5 dBm minimum 0 dBm maximum -2 dBm minimum 3 dBm maximum Input Optical Power (RCV): -18 dBm minimum 0 dBm maximum -27 dBm minimum -9 dBm maximum OptEnet ™ Optical Extension Platform Optical Conversion Line Cards 6 www.adc.com • +1-952-938-8080 • 1-800-366-3891 6/06 • 101360AE OptEnet ™ Optical Extension Platform OptEnet ™ Gigabit Ethernet Line Card The OptEnet 1000Mb/s media converter line card is designed to convert optical signals to electrical signals. The card supports 1000BASE-T data rates over UTP and singlemode or multimode fiber. Supported Protocols Specifications ELECTRICAL Input Power: 2.2 Watts maximum; normal operation PHYSICAL Chassis Compatibility: OptEnet modular chassis Fiber Optic Connectors: SC Dimensions (HxWxD): 1.14" x 8.07" x 7.4" (2.89 x 20.5 x 18.8 cm) Weight: 0.27 lbs (122 g) Electrical Interface: RJ45 Optical Interface: SC OPTICAL PERFORMANCE Application Data Rate Media Distance Interface 1000Base-T 1000Mb/s UTP Category 5e (4-pair) 328 feet (100 m) RJ45 1000Base-LX 1000Mb/s 1300 nm singlemode fiber 6.2 miles (10 km) (8/125µm) SC 1000Base-SX 1000Mb/s 850 nm multimode fiber 1804 feet (550m) SC OptEnet 1000Base-LX Line Card Features: • Supports Gigabit Ethernet • Full duplex transmission (transmit and receive) • Ethernet and fiber optic link indicators • MDI-X – Auto-detects and corrects cross-over 1000Base-LX 1000Base-SX Wavelength: 1270 to 1355 nm range 830 to 870 nm range Output Optical Power (XMT): -11 dBm minimum -3 dBm maximum -9.5 dBm minimum 4 dBm maximum Input Optical Power (RCV): -22 dBm minimum -20 dBm maximum -17 dBm minimum -3 dBm maximum OptEnet ™ Optical Extension Platform Optical Conversion Line Cards 7 www.adc.com • +1-952-938-8080 • 1-800-366-3891 6/06 • 101360AE OptEnet ™ Optical Extension Platform OptEnet ™ 10/100 Mb/s Optical Ethernet Conversion Line Card The OptEnet 10/100 Mb/s optical Ethernet conversion line cards are designed to convert optical signals to electrical signals. The line cards have an auto negotiation feature allowing them to detect and synchronize with either a 10Base-T or 100Base-TX signal. The cards support 10Base-T and 100Base-T data rates over UTP and singlemode or multimode fiber. Supported Protocols: Features: • Supports 10Base-T, and 100Base-TX • Full and half duplex transmission (transmit and receive) • Ethernet and fiber optic link indicators • Auto negotiation over fiber and copper (ANSI/TIA 785) • MDI-X – Auto-detects and corrects cross-over Specifications ELECTRICAL Input Power: 1.75 Watts maximum; normal operation PHYSICAL Chassis Compatibility: OptEnet modular chassis Fiber Optic Connectors: SC Dimensions (HxWxD): 2.89 cm x 20.5 cm x 18.8 cm (1.14“ x 8.07“ x 7.4“) Weight: 122 g (0.27 lbs) Electrical Interface: RJ45 Optical Interface: SC OPTICAL PERFORMANCE OptEnet 100Base-LX Ethernet Line Card Application Data Rate Media Distance Interface 10Base-T 10 Mb/s UTP Category 3, 4 or 5 (2-pair) 100 m (328 feet) RJ45 100Base-TX 100 Mb/s UTP Category 5 (2-pair) 100 m (328 feet) RJ45 100Base-LX 10/100 Mb/s 1300 nm singlemode fiber 15 km (9.3 miles) SC 100Base-LX 10/100 Mb/s 1800 nm singlemode fiber 40 km (24.8 miles) SC 100Base-SX 10/100 Mb/s 850 nm multimode fiber 300 m (984 feet) SC 100Base-FX 10/100 Mb/s 1310 nm multimode fiber 2 km (2562 feet) SC 100Base-LX (Singlemode) 15 km 100Base-LX (Singlemode) 40 km 100Base-SX (Multimode) 100Base-FX (Multimode) Wavelength: 1270 to 1380 nm range 1270 to 1355 nm range 830 to 870 nm range 1270 to 1380 nm range Output Optical Power (XMT) 8/125µm: -15 dBm minimum -8 dBm maximum -8 dBm minimum -2 dBm maximum -17 dBm minimum -12 dBm maximum -19 dBm minimum -14 dBm maximum Input Optical Power (RCV): -31 dBm minimum -7 dBm maximum -34 dBm minimum -7 dBm maximum -26 dBm minimum -12 dBm maximum -32 dBm minimum -11 dBm maximun OptEnet ™ Optical Extension Platform Optical Conversion Line Cards 8 www.adc.com • +1-952-938-8080 • 1-800-366-3891 6/06 • 101360AE OptEnet ™ Optical Extension Platform OptEnet ™ Ethernet Line Card for CWDM Application The OptEnet 10/100 Mb/s and Gigabit 1000 Mb/s media converter line card can be configured to support various wavelengths on the optical interface. The line card supports small-form-plugable (SFP) transceivers in wavelengths from 1470 nm to 1610 nm. This enables the module to interface with a passive CWDM multiplexer and reduce the number of optical links between sites. Features: • Supports 10Base-T, 100Base-TX and 1000Base-T • Full and half duplex transmission (transmit and receive) • Ethernet and fiber optic link indicators • MDI-X – Auto-detects and corrects cross-over • SFP optical interface • Available in 1470 to 1610 nm wavelengths in 20 nm increments Specifications ELECTRICAL Input Power: 2.2 Watts maximum; normal operation PHYSICAL Chassis Compatibility: OptEnet modular chassis Fiber Optic Connectors: SFP Dimensions (HxWxD): 2.89 cm x 20.5 cm x 18.8 cm (1.14“ x 8.07“ x 7.4“) Weight: 122 g (0.27 lbs) Electrical Interface: RJ45 (UTP Category 5e) Optical Interface: LC Distance: 40 km OPTICAL PERFORMANCE OptEnet 1000Base-LX Line Card 10/100 Mb/s GigE Wavelength: 1470 to 1610 nm range 1470 to 1610 nm range Output Optical Power (XMT): -2 dBm minimum 3 dBm maximum -2 dBm minimum 3 dBm maximum Input Optical Power (RCV): -32 dBm minimum -9 dBm maximum -32 dBm minimum -9 dBm maximum OptEnet ™ Optical Extension Platform 9 www.adc.com • +1-952-938-8080 • 1-800-366-3891 6/06 • 101360AE OptEnet ™ Optical Extension Platform Ordering Information Description Catalog Number OptEnet ™ Common Equipment Modular Chassis OptEnet-14-Port ADCCE1400A OptEnet-12-Port ADCCE1100A OptEnet-4-Port ADCCE1000A OptEnet-4-Port w/AC Power Supply ADCCE1020A Power Supply Modules For redundant power applications, the OptEnet system requires two power supply modules 14-Port Chassis Power Supplies OptEnet-48 VDC Power Supply Module (100 W)-standard temperature ADCCE2440A OptEnet Universal AC Power Supply Module ADCCE2600A 12-Port Chassis Power Supplies OptEnet+24 VDC Power Supply Module ADCCE2200A OptEnet-48 VDC Power Supply Module (100 W) – Extended Temperature ADCCE2400A OptEnet-48 VDC Power Supply Module (100 W) – Standard Temperature ADCCE2410A 4-Port Chassis Power Supplies OptEnet-48 VDC Power Supply Module (50 W) – Extended Temperature ADCCE2450A Communications Modules The communications modules are optional to the system. Only one communications module can be deployed in the system; either the CPU or alarm module OptEnet Central Processor Unit ADCCE3000A OptEnet Alarm Module ADCCE3100A OptEnet Alarm cable assembly ADCCE3100A OptEnet Line Cards Optical Conversion Line Card OptEnet Singlemode to Multimode, 10-622 Mb/s optical converter, SC connector, 1310 nm Standard Temperature ADCPE6000A Extended Temperature ADCPE6001A Optical Regeneration Line Card OptEnet Singlemode to Singlemode Regenerator, 10 Mb/s to 2.488 Gb/s 15 km ADCPE6515A 40 km ADCPE6540A OptEnet 10/100 Mb/s Optical Ethernet Conversion Line Card 100Base-SX (SC) ADCPE4000A 100Base-LX (SC) 15 km ADCPE4200A 100Base-LX (SC) 40 km ADCPE4240A 100Base-FX (SC) ADCPE4400A OptEnet 1000 Mb/s Ethernet Conversion Line Cards 1000Base-SX (SC) ADCPE5000A 1000Base-LX (SC) ADCPE5100A OptEnet Ethernet Conversion Line Cards for CWDM Applications 10/100 Mb/s Media Conversion Line Card ADCPE45F1A-xxxx* 1000 Mb/s GigE Line Card ADCPE55F1A-xxxx* *Note: xxxx must be replaced with required wavelength: 1470, 1490, 1510, 1530, 1550, 1570, 1590 or 1610 nm. ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101 Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer 101360AE 6/06 Original © 2004, 2006 ADC Telecommunications, Inc. All Rights Reserved Web Site: www.adc.com From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080 Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site. SPEC SHEET . Optical Extension Platform Optical Conversion Line Cards 5 www.adc.com • +1-952-938-8080 • 1-800-366-3891 6/06 • 101360AE OptEnet ™ Optical Extension Platform. Optical Extension Platform Optical Conversion Line Cards 6 www.adc.com • +1-952-938-8080 • 1-800-366-3891 6/06 • 101360AE OptEnet ™ Optical Extension Platform