The innovative Fiber Distribution Frame (FDF) WideVAM ™ system is the latest offering in ADC's Value-Added Module (VAM) family of products. The WideVAM incorporates 18 front and 12 rear ports to provide 50 percent more density than the standard FDF VAM. 7-inch and 8-inch WideVAM chassis are available, ensuring consistent, superior cable management within the frame. Value-Added Module System Fiber Distribution Frame (FDF) WideVAM ™ System Features: • Enclosed plug-in modules Optical components are protected from physical and environmental damage • Removable angled retainers Maintain minimum bend radius of fiber patch cords and allow single fiber access • Flexible platform Modules can be created for new applications quickly and easily to meet customer requirements • Monitor and/or test Enables providers to troubleshoot networks without forcing disruption of service • Custom configurations Custom splitter configurations available upon request 2/02 • 891-WVAM Value-Added Module System 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Value-Added Module System Fiber Distribution Frame (FDF) WideVAM WideVAM Chassis Description Unloaded chassis for ADC front load frames; accommodates 6 WideVAM modules Catalog Number FDF-STDWVAM Dimensions (HxWxD) 8" x 21.60" x 8.84" (20.32 x 54.86 x 22.45 cm) Ordering Information Description Unloaded chassis for ADC rear load frames; accommodates 6 WideVAM modules Catalog Number FDF-FCMWVAM Dimensions (HxWxD) 8" x 24.41" x 12.11" (20.32 x 62 x 30.76 cm) Ordering Information ADC's FDF can grow from one fiber to thousands of fibers without sacrificing space, function or cable management protection. Integrating optical components into the FDF improves functionality, reduces operations costs and increases profitability. ADC's WideVAM family of products allows for an even more efficient integration of optical components into the FDF. WideVAM chassis are available for both the 8" FDF product family and universal 19"/23" rack mount environments. The WideVAM chassis continue to provide the utmost protection, modularity and flexibility for all optical component needs. 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 2/02 • 891-WVAM Value-Added Module System Value-Added Module System Fiber Distribution Frame (FDF) WideVAM WideVAM Chassis Description 3.5" unloaded chassis; accommodates 2 WideVAM modules Catalog Number FVM-19X350W-M6 Dimensions (HxWxD) 3.5" x 19" x 11.97" (8.89 x 48.26 x 30.40 cm) Ordering Information Description 7" unloaded chassis; accommodates 6 WideVAM modules Catalog Number FVM-19X700W Dimensions (HxWxD) 7" x 19" x 11.94" (17.78 x 48.26 x 30.33 cm) Ordering Information 2/02 • 891-WVAM Value-Added Module System 4 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Value-Added Module System Fiber Distribution Frame (FDF) WideVAM Video Splitter Module Ordering Information 4 Input Rear, Output Rear IN OUT REAR 2 IN OUT FRONTREAR REAR OUTPUT OUTPUT OUTPUT INPUT OUTPUT 3 IN OUT FRONT FRONT Input Front, Output Rear 1 x N OUTPUT OUTPUT INPUT INPUT Input Front, Output Front 1 x N 1 x N IN OUT Input Rear, Output Front 5 REAR FRONT OUTPUT OUTPUT INPUT 1 x N Catalog Number VSMW- __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ Split Ratio 2000 1x2 50/50 2100 1x2 55/45 2200 1x2 60/40 2300 1x2 65/35 2350 1x2 66.6/33.3 2400 1x2 70/30 2500 1x2 75/25 2600 1x2 80/20 2700 1x2 85/15 2800 1x2 90/10 2900 1x2 95/5 2950 1x2 99/1 2030 1x2 50/50 3900 1x3 33/33/33 4900 1x4 25/25/25/25 5300 1x5 20/20/20/20/20 6000 1x6 16.6/16.6/ .16.6 7000 1x7 14.3/14.3/ .14.3 8000 1x8 12.5/12.5/ .12.5 9000 1x9 11.1/11.1/ .11.1 A110 1x10 10/10/10/ .10 B111 1x11 9.1/9.1/ .9.1 C112 1x12 8.33/8.33 .8.33 D113 1x13 7.7/7.7/ .7.7 E114 1x14 7.14/7.14 .7.14 F115 1x15 6.66/6.66/ .6.66 G116 1x16 6.25/6.25/ .6.25 M132 1x17 3.125/3.125/ .3.125 Input Pigtail Length † (in meters) Example: 00 = No pigtail 01 = 1 meter 10 = 10 meters Output Pigtail Length † (in meters) Example: 00 = No pigtail 01 = 1 meter 10 = 10 meters Module Option 2 Input front, output front 3 Input front, output rear 4 Input rear, output rear 5 Input rear, output front Input Connector/Adapter Singlemode 2U FC ultra polish 2A FC angled polish 4U ST ® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5 ® angled polish 00 Bare fiber Multimode** 5F ST ® 50/125 5U ST ® 62.5/125 9A SC 50/125 9B SC 62.5/125 LM LX.5 ® 62.5/125 LN LX.5 ® 50/125 2M FC 62.5/125 2N FC 50/125 00 Bare fiber or Output Connector/Adapter Singlemode 2U FC ultra polish 2A FC angled polish 4U ST ® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5 ® angled polish 00 Bare fiber or Splitter Type Wideband 1310 and 1550 nm G 1310 nm wavelength flattened J 1550 nm wavelength flattened LEAVE BLANK † Leave 00 for adapter option Number of Splitters A Single splitter B Dual splitter C Triple splitter Other split ratios are available. Call ADC Technical Assistance Center at 1-800-366-3891, Ext. 73475 or visit our website at www.adc.com. **Contact ADC for multimode specifications and available split ratios Multimode** 5F ST ® 50/125 5U ST ® 62.5/125 9A SC 50/125 9B SC 62.5/125 LM LX.5 ® 62.5/125 LN LX.5 ® 50/125 2M FC 62.5/125 2N FC 50/125 00 Bare fiber 2/02 • 891-WVAM Value-Added Module System 5 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Value-Added Module System Fiber Distribution Frame (FDF) WideVAM Singlemode Wideband Optical Splitter Specifications Other splitter configurations are available. Please call ADC Technical Assistance Center, 1-800-366-3891, ext. 73475, or visit our website at www.adc.com. 2000 2100 2200 2300 2350 2400 2500 2600 2700 2800 2900 2950 2030 3900 4900 5300 6000 7000 8000 9000 A110 B111 C112 D113 E114 F115 G116 M132 1x2 1x2 1x2 1x2 1x2 1x2 1x2 1x2 1x2 1x2 1x2 1x2 2x2 1x3 1x4 1x5 1x6 1x7 1x8 1x9 1x10 1x11 1x12 1x13 1x14 1x15 1x16 1x32 50/50 55/45 60/40 65/35 66.6./33.3 70/30 75/25 80/20 85/15 90/10 95/5 99/1 50/50 33/33/33 25/25/25/25 20/20/20/20/20 16.6/16.6/ . . . 16.6 14.3/14.3/ . . . /14.3 12.5/12.5/ . . .12.5 11.1/11.1/ . . . /11.1 10/10/10 . . . /10 9.1/9.1/ . . . /9.1 8.3/8.3/ . . . /8.3 7.7/7.7/ . . . /7.7 7.14/7.14/ . . . /7.14 6.66/6.66/ . . . /6.66 6.25/6.25/ . . . 6.25 3.13/3.13/ . . . 3.13 3.7/3.7 3.2/4.1 2.7/4.7 2.3/5.3 2.2/5.5 2.0/6.0 1.6/6.8 1.3/7.8 1.0/9.2 .8/11.2 .5/14.4 0.3/22.5 3.7/3.7 5.9/5.9/5.9 7.4/7.4/7.4/7.4 8.6/8.6/8.6/8.6/8.6 9.8/9.8/9.8/ . . ./9.8 10.6/10.6/ . . . /10.6 11.3/11.3/ . . . /11.3 11.5/11.5/ . . . /11.5 12.1/12.1/ . . . /12.1 13.1/13.1/ . . . /13.1 13.3/13.3/ . . . /13.3 13.8/13.8/ . . . /13.8 13.8/13.8/ . . . /13.8 14.5/14.5/ . . . /14.5 14.9/14.9/ . . . 14.9 18.5/18.5/ . . . 18/5 3.1/3.1 2.7/3.6 2.3/4.1 2.0/4.7 1.9/5.0 1.7/5.4 1.4/6.2 1.1/7.1 .8/8.4 .6/10.2 .4/13.2 NA/NA 3.1/3.1 5.0/5.0/5.0 6.2/6.2/6.2/6.2 7.3/7.3/7.3/7.3/7.3 8.1/8.1/8.1 . . . /8.1 8.9/8.9/ . . . /8.9 9.5/9.5/ . . ./9.5 9.9/9.9/ . . . /9.9 10.4/10.4/ . . . /10.4 10.9/10.9/ . . . /10.9 11.3/11.3/ . . . /11.3 11.6/11.6/ . . . /11.6 11.8/11.8/ . . . /11.8 12.4/12.4/ . . . /12.4 12.6/12.6/ . . . 12.6 15.8/15.8/ . . . 15.8 Splitter Number Splitter Type Splitter Ratio Maximum Insertion Loss* Typical Insertion Loss* * Does not include connector loss. See table on the next page or call ADC Technical Assistance Center, 1-800-366-3891, ext. 73475. Maximum Insertion Loss Maximum insertion loss is the upper limit of insertion loss for the coupler and applies over the entire wavelength range specified in the bandpass. Typical Insertion Loss Typical insertion loss is the expected insertion loss value for the coupler measured at the specified center wavelength (i.e., 1310 nm and/or 1550 nm). 2/02 • 891-WVAM Value-Added Module System 6 www.adc.com • +1-952-938-8080 • 1-800-366-3891 MATERIAL Fiber: Jacket: Housing: OPTICAL Bandpass Wavelength 1: Wavelength 2: Directivity: Reflectance: Polarization Stability: MECHANICAL Cable Retention: Flex: Twist: Vibration: Impact: Flammability: ENVIRONMENTAL Humidity: Thermal Aging: Temperature Cycling: Corning SMF-28 0.900 mm hytrel tube Stainless steel tube 1260/1360 nm 1430/1580 nm 55 dB minimum < -55 dB .5 dB maximum .45 kg (1.0 lb.) maximum for .25 mm and .900 mm fiber, 1 kg (2.2 lbs.) maximum for cabled fiber assemblies 300 cycles; .45 kg (1.0 lb.) maximum load (fiber cable only) 100 cycles; .45 kg (1.0 lb.) maximum load (fiber cable only) 10-55 Hz per FOTP II condition I 8 drops from 1.5 meters All materials used in fabrication of coupler housing meet UL 94, Level V-I requirements 336 hours, 60°C at 95% relative humidity 336 hours, 85°C 336 hours, -40°C to 85°C Singlemode Optical Splitter Specifications Singlemode Optical Connector Specifications Ultra Polish PC Connectors: Angled Polish Connectors: INSERTION LOSS (dB) 0.3 dB maximum 0.15 dB typical 0.5 dB maximum 0.2 dB typical RETURN LOSS (dB) 57 dB minimum 65 dB minimum Value-Added Module System Fiber Distribution Frame (FDF) WideVAM 2/02 • 891-WVAM Value-Added Module System 7 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Value-Added Module System Fiber Distribution Frame (FDF) WideVAM WDM Module Ordering Information In the ordering charts, the abbreviation “mux” references the multiplexed side of the WDM, the side where two optical signals coexist on one fiber. The abbreviation “demux” references the demultiplexed side of the WDM, the side where each signal appears on its own fiber. Both unidirectional and bidirectional WDMs are available as shown below. 1310 1310 1550 1550 1310 1310 1550 1550 UNIDIRECTIONAL MULTIPLEXER BIDIRECTIONAL TRANSMISSION DEMUX MUX 1310 1310 1550 1550 MUX DEMUX DEMUX MUX 1310 1310 1550 1550 MUX DEMUX UNIDIRECTIONAL DEMULTIPLEXER Catalog Number WDMW- __ __ __ __ __ __ __ __ __ __ __ __ __ Mux Port Pigtail Length Length † (in meters) Example: 00 = No pigtail 01 = 1 meter 10 = 10 meters Demux Port Pigtail Length Length † (in meters) Example: 00 = No pigtail 01 = 1 meter 10 = 10 meters Configuration 2 MUX front, DEMUX front 3 MUX front, DEMUX rear 4 MUX rear, DEMUX rear 5 MUX rear, DEMUX front Demux Port Connector/Adapter 2U FC ultra polish 2A FC angled polish 4U ST ® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5 ® angled polish 00 Bare fiber Mux Port Connector/Adapter 2U FC ultra polish 2A FC angled polish 4U ST ® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5 ® angled polish 00 Bare fiber Wavelength A 1310 (λ 1 )/1550(λ 2 ) B 1533 (λ 1 )/1557(λ 2 ) C 1310/1533/1557 E 1550 (λ 1 )/1625(λ 2 ) F 1310 (λ 1 )/1625(λ 2 ) † Leave 00 for adapter option * WDM Type "L" includes (1) unidirectional multiplexer (standard isolation) and (1) unidirectional demultiplexer (isolation specified by next character) Module Configuration A Single B Dual C Triple Isolation 1 Standard 2 High 3 Very high WDM Type (λ 1 , λ 2 ) A Undirectional multiplexer C Undirectional demultiplexer E Bidirectional λ 1 Tx/λ 2 Rx G Bidirectional λ 1 Rx/λ 2 Tx J 45 dB isolation, pass 1310 K 45 dB isolation, pass 1550 L (Dual only) unidirectional multiplexer, undirectional demultiplexer* M (Dual only) bidirectional λ 1 Tx/λ 2 Rx, bidirectional λ 2 Tx/λ 1 Rx 2/02 • 891-WVAM Value-Added Module System 8 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Value-Added Module System Fiber Distribution Frame (FDF) WideVAM 4 Mux Rear, Demux Rear REAR Mux Rear, Demux Front 5 REAR FRONT 2 FRONTREAR REAR Demux Demux Demux Mux Demux 3 FRONT FRONT Mux Front, Demux Rear WDM Demux Demux Mux Mux Demux Demux Mux Mux Front, Demux Front WDM WDM WDM 2/02 • 891-WVAM Value-Added Module System 9 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Value-Added Module System Fiber Distribution Frame (FDF) WideVAM Singlemode WDM Specifications MATERIAL Fiber: Jacket: OPTICAL Uniformity: Polarization Stability: Bandpass: Insertion Loss: Reflectance: Isolation Near End: Far End: MECHANICAL Cable Retention: Flex: Twist: Vibration: Impact: Flammability: ENVIRONMENTAL Humidity Resistance: Thermal Aging: Temperature Cycling: Corning SMF-28 0.900 mm 1.0 Log2N (where N = number of channels) 0.5 dB maximum (see table below) (see table below) < -55 dB 55 dB (see table below) .45 kg (1.0 lb.) maximum for .250 mm and .900 mm fiber; 1.0 kg (2.2 lbs.) maximum for cabled fiber assemblies 300 cycles; .45 kg (1.0 lb.) maximum load (fiber cable only) 100 cycles; .45 kg (1.0 lb.) maximum load (fiber cable only) 10-55 Hz per FOTP II condition I 8 drops from 1.5 meters All materials used in fabrication of the coupler housing meet UL 94, Level V-I requirements 336 hours, 60°C at 95% relative humidity 336 hours, 85°C 336 hours, -40°C to 85°C Multiplexer/Demultiplexer: High Isolation Demultiplexer: Very High Isolation Demultiplexer: Wavelength Filters: 1310/1550 nm MAXIMUM INSERTION LOSS* (dB) 0.3 0.7 1.0 0.3 MINIMUM ISOLATION (dB) 15 30 45 15 PASSBAND (nm) 1310 ± 20 nm and 1550 ± 20 nm 1310 ± 20 nm and 1550 ± 20 nm 1310 ± 20 nm and 1550 ± 20 nm 1310 ± 20 nm and 1550 ± 20 nm Unidirectional Multiplexer: High Isolation Undirectional Multiplexer or Bidirectional Multiplexer/Demultiplexer: Very High Isolation Undirectional Multiplexer or Bidirectional Multiplexer/Demultiplexer: Filter Passing 1533 nm: Filter Passing 1557 nm: 1533/1557 nm MAXIMUM INSERTION LOSS* (dB) 0.9 1.8 2.1 0.9 0.9 MINIMUM ISOLATION (dB) N/A 20 35 13 13 PASSBAND (nm) 1533 ±3 and 1557 ±3 nm 1533 ±3 and 1557 ±3 nm 1533 ±3 and 1557 ±3 nm 1533 ±3 nm 1557 ±3 nm * Maximum Insertion Loss does not include connector loss. See page 6 for connector specifications and definitions. Length † (in meters) Example: 00 = No pigtail 01 = 1 meter 10 = 10 meters 2/02 • 891-WVAM Value-Added Module System 10 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Value-Added Module System Fiber Distribution Frame (FDF) WideVAM Monitor Module Ordering Information Catalog Number VMMW-__ __ __ __ __ __ __ __ __ Input Pigtail Length Monitor Pigtail Length Input Connector Type Singlemode 2U FC ultra polish 2A FC angled polish 4U ST ® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5 ® angled polish 00 Bare fiber Multimode** 5F ST ® 50/125 5U ST ® 62.5/125 9A SC 50/125 9B SC 62.5/125 LM LX.5 ® 62.5/125 LN LX.5 ® 50/125 2M FC 62.5/125 2N FC 50/125 00 Bare fiber or Output Connector Type Singlemode 2U FC ultra polish 2A FC angled polish 4U ST ® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5 ® angled polish 00 Bare fiber Monitor Connector Type Singlemode 2U FC ultra polish 2A FC angled polish 4U ST ® ultra polish 7U SC ultra polish 7A SC angled polish 8A E-2000 angled polish LA LX.5 ® angled polish 00 Bare fiber or † Leave 000 for adapter option * See detailed splitter and connector specifications on page 5-6. Contact ADC for multimode specifications and available split ratios at 1-800-366-3891, Ext. 73475 or visit our website at www.adc.com. Multimode** 5F ST ® 50/125 5U ST ® 62.5/125 9A SC 50/125 9B SC 62.5/125 LM LX.5 ® 62.5/125 LN LX.5 ® 50/125 2M FC 62.5/125 2N FC 50/125 00 Bare fiber Number of Circuits per VAM 1 1 circuit 2 2 circuits 3 3 circuits Split Ratio A 90/10 B 95/05 C 50/50 E 80/20 F 75/25 H 70/30 J 60/40 K 99/01 or Multimode** 5F ST ® 50/125 5U ST ® 62.5/125 9A SC 50/125 9B SC 62.5/125 LM LX.5 ® 62.5/125 LN LX.5 ® 50/125 2M FC 62.5/125 2N FC 50/125 00 Bare fiber Module Style B Cross-connect customer premises D Dual monitor cross-connect G Dual monitor cross-connect J Dual monitor P Customer premises R Single monitor cross-connect Output Pigtail Length [...].. .Value-Added Module System Fiber Distribution Frame (FDF) WideVAM Module Style Customer Premises Monitor Module D Dual Monitor Cross-Connect G Dual Monitor Cross-Connect XX% 1x2 SPLITTER B XX% CUST MON SRC MON Tx 10% SPLITTER XX% 1x2 SPLITTER A 1x2 Rx Rx... SRC Tx J Dual Monitor Cross-Connect 1x2 P Customer Premises Monitor Module R Single Monitor Cross-Connect Mon Tx Mon Rx XX.XX% CUST MON Tx Rx SRC MON 1x2 1x2 SPLITTER XX.XX% XX.XX% 1x2 SPLITTER XX.XX% CUST Rx XX.XX% Tx AI 1x2 SPLITTER CUST Tx SRC Rx XX.XX% Tx MON A2 Rx Tx A SRC Tx Tx SRC Rx Rx SRC 2/02 • 891-WVAM Value-Added Module System B w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 . Bare fiber 2/02 • 891-WVAM Value-Added Module System 5 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Value-Added Module System Fiber Distribution Frame (FDF). 891-WVAM Value-Added Module System 10 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Value-Added Module System Fiber Distribution Frame (FDF) WideVAM Monitor Module