Datasheet - FO - Optical Distribution System - ODS 500

KRONE FiberPLUS ® The ODS 500 is a modularly de- signed FO distributor system for the termination and patching of fibre-optic cables. The system is built up around the Distribution Cabinet System IPC (basic frame with corresponding accessories). Depending upon the customer’s requirements, the IPC can be fitted with ■ sub-racks ■ cable guide tray ■ cable channel units ODS 500 Optical Distribution System Connector modules The connector modules are for the termination of loose tubes from outdoor or indoor cables. The pre-assembled modules are ready for installation and are outfitted with 12 through-adapters and pigtails; all common plug connectors are available. They contain further a splice tray, a splice cassette and an excess-length cassette for accommodation of pigtail excess lengths as well as of appr. 1.5m of loose tube. This allows the module to be carried to the splice device. Cable guide tray In the front area below every sub-rack space is to be left for cable guide trays. They are for horizontal guiding of patch cables into the vertical cable guide channels. In addition, they are equipped with redirec- tional elements for guiding the patchcords coming from the connector modules into the cable guide trays. Storage unit For accommodation of patchcord excess lengths. Cable channel unit Used for guiding the patchcords between two or more distributors. Cable guide unit, vertical The vertical cable guide units guide the patchcords between the sub-racks. They are part of the cable management system, which consists of the cable guide unit vertical, the cable guide tray, the cable channel unit and the storage unit. Sub-rack (3 U) The sub-racks are outfitted with a feed-in system for leading individual loose tubes directly to the different module locations. Accommodation for 6 connector modules, 10 HP. Recommended configuration IPC Frame 1 pc Side panel, left 1 pc Sidepanel, right 1 pc Back wall 1 pc Door 1 pc Modules for IPC Sub-rack 68 HP 8 pcs Cable guide unit, vertical 8 pcs Cable guide tray 8 pcs Cable channel unit 3 pcs Storage unit 1 pc ODS 500 FO connector module with access lenght cassette The modular design is based on the purchase of individual components. The functionality of the system is continually being expanded. Order information (98210)-0301-010-CVS, Subject to change * include Cable guide unit, vertical and Cable guide tray metsysStV rebmunredrO ytQ emarF 01-10119307cp1 lenapediS 01-20119307cp1 llawkcaB 01-60119307cp1 rooDtnemelegnikcolelpmishtiw tnemelegnikcolelbuodhtiw 00-50119307 01-40119307 cp1 cp1 fooR 01-70119307cp1 semarf"91rofskcar-buS rebmunredrO ytQ kcar-buS)01x8(PH48 01)4x4(PH48 80-52723386 81-52723386 cp1 cp1 yartediugelbaC 10-22723386cp1 metsysStVrofstinU rebmunredrO ytQ kcar-buS)01x6(PH86 60-52723386cp1 tinuediugelbaC*etelpmoc 60-02723386cp1 tinulennahcelbaC 60-82723386cp1 tinuegarotS 60-72723386cp1 seludomrotcennoC rebmunredrO ytQ PH01CPA/CSx21 5MCP/CSx21 CP/CSx21 00-00623386 10-00623386 20-00623386 cp1 cp1 cp1 CP/CFx21 30-00623386cp1 CPA/0002Ex21 40-00623386cp1 CPA/xelpuD-CLx6 CPU/xelpuD-CLx6 60-00623386 70-00623386 cp1 cp1 KRONE GmbH Beeskowdamm 3-11 D-14167 Berlin Telefon +49 30 8453-1422 Telefax +49 30 8453-1412 http://www.krone.com vertrieb@krone.com . The ODS 500 is a modularly de- signed FO distributor system for the termination and patching of fibre-optic cables. The system is built up around the Distribution. CP/CSx21 0 0-0 0623386 1 0-0 0623386 2 0-0 0623386 cp1 cp1 cp1 CP/CFx21 3 0-0 0623386cp1 CPA/0002Ex21 4 0-0 0623386cp1 CPA/xelpuD-CLx6 CPU/xelpuD-CLx6 6 0-0 0623386 7 0-0 0623386