1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

hướng dẫn sử dụng surpac

56 620 1

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 56
Dung lượng 2,35 MB

Nội dung

Task: Viewing the Data 3. Open stopes1.dtm. This file represents two parallel ore zones. 4. Open ugdes_final1.dtm You will be creating a part of the file ugdes_final1.dtm in this tutorial. It consists of a series of three-dimensional solid objects representing an underground mine design.

Trang 1

0

Quick Start Guide

July 2006

Trang 2

Copyright © 2006 Surpac Minex Group Pty Ltd (A Gemcom Company) All rights

reserved

This software and documentation is proprietary to Surpac Minex Group Pty Ltd

Surpac Minex Group Pty Ltd publishes this documentation for the sole use of Surpac

licenses Without written permission you may not sell, reproduce, store in a retrieval system,

or transmit any part of the documentation For such permission, or to obtain extra copies please contact your local Surpac Minex Group Office

Surpac Minex Group Pty Ltd

Level 8 190 St Georges Terrace

Perth, Western Australia 6000

Telephone: (08) 94201383

Fax: (08) 94201350

While every precaution has been taken in the preparation of this manual, we assume no responsibility for errors or omissions Neither is any liability assumed for damage resulting from the use of the information contained herein

All brand and product names are trademarks or registered trademarks of there respective companies

About This Manual

This manual has been designed to provide a practical guide to the many uses of the software The applications contained within this manual are by no means exhaustive as the possible uses of the software are only limited by the user’s imagination However, it will give new users

a starting point and existing users a good overview by demonstrating how to use many of the functions in Surpac Vision If you have any difficulties or questions while working through this manual feel free to contact your local Surpac Minex Group Office

Contributors

Sean Richardson

Rowdy Bristol

Phil Jackson

Surpac Minex Group

Perth, Western Australia

Product

Surpac Vision v5.2

Trang 3

Table of Contents

Introduction 1

Requirements 1

Objectives 1

Workflow 1

Installation of Surpac Vision 2

1 Installing the software from a CD 3

2 Installing the software from a download 7

3 Starting the software 26

Surpac Licencing 27

1 Local vs Network Licencing 27

2 Setting up a Local Licence 28

3 Setting up a Network Licence 33

The Surpac Vision Interface 34

1 Surpac Vision Interface 34

2 Menu Structure 38

3 Function Keys 40

4 Finding Help for Surpac Functionality 40

More Surpac Functions 42

1 String and DTM files 43

2 Drillhole Databases 44

3 Block modelling 46

4 Plotting 51

Summary 53

Trang 4

Introduction

This Quick Start Guide is designed to help new or prospective users install Surpac Vision correctly and start using the software It is not designed as a training aid and should not be considered as a substitute for training

More detailed training information is available within the software and from your local Surpac Minex Group Support Office When the software has been installed you can see additional training resources and help documentation in the Help menu

Additional resources are available for detailed training on all aspects of Surpac Vision Your local Surpac Minex Support Office will also have access to additional training aids and can help you with advice on your particular training needs

Visit www.surpac.com to locate your nearest Support Office

Requirements

Prior to proceeding with this tutorial, you should ensure you have the following items:

1 A copy of the software for installation

This is usually installed from a CD, but the software can be downloaded from the

www.surpac.com website

2 A suitable computer with a CD ROM drive (if installing from a CD)

Windows XP/2000 or NT

256MB RAM Minimum

Pentium 4 processor or equivalent

Suitable graphics card is recommended

160MB disk space (for installation) 80MB disk (for software storage)

Objectives

By working through this document, you should be able to:

• Install and start the software

• Understand the licensing system

• Understand the basic components of the interface

• Load various file types into graphics/memory

• Use the menu system to navigate through the modules

• Run basic Surpac Functions – Licence Restricted

• Understand the application and use within an organisation

Workflow

• Installation of Surpac Vision

• Surpac Licencing

• Exploring Surpac Vision

• Basic Surpac Functionality

Trang 5

Installation of Surpac Vision

Overview

The following concepts will be presented in this chapter:

1 Installing the software from a CD

2 Installing the software from a download

3 Starting the software

o Pentium 4 processor or equivalent

o a suitable graphics card

o 160MB disk space (for installation)

o 80MB disk space (for software storage)

• Sufficient administration privileges to install Surpac Vision

• Your Surpac Licence details at hand

Objectives

By working through this section, you should be able to:

1 Install the software from a CD

2 Install the software from a download

3 Start the software

2

Trang 6

1 Installing the software from a CD

Insert the CD into your computer’s CD ROM drive If Auto Run has been enabled on the CD ROM drive, the installation menu will appear If not, use Windows Explorer to navigate to the

CD and double click Autorun.exe

From the first menu, click Install

On the second menu, click Surpac Vision

Trang 7

After selecting Surpac Vision, you should see the following form Click Next > to continue

Click the button to accept the terms of the licence agreement and continue with the

installation, then click Next >

If you do not accept the terms of the license agreement, the installation cannot continue

4

Trang 8

On the following form, click Next

Note: Although, you may use the Change… option to select another destination folder for the

program, it is strongly recommended that you leave this as the default location DO NOT

install the software in any directory beneath C:\Program Files\

On the following form, ensure Surpac Vision is selected and click Next >

Trang 9

On the following form, click Install

The software and selected components will now be installed

Click Finish You are now ready to begin using the software

6

Trang 10

2 Installing the software from a download

With the release of 5.2C, the downloadable installation has been changed The most

noticeable change is that the download for Surpac Vision has been split into two separate downloads

The Prerequisites download installs an upgraded sentinel driver and other common files required to run Surpac It is essential that you download and install the prerequisites kit once for each major version change (v5.2, v5.3, v6.0 for example), but not for each maintenance release (5.2c, 5.2d etc)

You will also need to download the required package for the product you wish to install This change has been made to reduce the size of each download, and since you only require the Prerequisites kit on infrequent occasions, should make downloading and installing new versions of the software much easier

You may also notice that the downloads are now Windows-standard Microsoft Installer installations, which can be deployed easier by systems administrators to remote sites

Note: Please read the release notes and readme file before you download to ensure you are

aware of the extensive new functionality and known issues It is suggested that the software

be installed in the default path and that any existing installation be maintained to ensure that the transition is smooth Major upgrades to plotting and graphics components have been made that may affect some users

You must download and install each of the following components separately:

• V5.2 Prerequisites

• Surpac Vision

• Reference manual

Trang 11

Installing the V52 Prerequisites

From the www.surpac.com website, select Downloads, then Product downloads

You will see the following screen:

Follow the Surpac Vision link to the product download links as shown below

Click the link for the product you wish to download, in this case V52 Prerequisites

8

Trang 12

Enter your details as in the example below and then click Download Now

On the following form, click Save

Trang 13

On the following form, select any temporary directory, then click Save

Once the download has completed, run prerequisites.msi by double clicking it

On the following form, click Run

10

Trang 14

On the following form, click Next >

Click the button to accept the terms of the licence agreement and continue with the

installation, then click Next >

If you do not accept the terms of the license agreement, the installation cannot continue

Trang 15

To install to the default directory, click Next > on the following form

Note: Although, you may use the Change… option to select another destination folder for the

program, it is strongly recommended that you leave this as the default location DO NOT

install the software in any directory beneath C:\Program Files\

On the following form, click Next >

12

Trang 16

On the following form, click Install

On the following form, click Finish

You are now ready to install Surpac Vision v5.2

Trang 17

Installing Surpac Vision v5.2 from a download

From the www.surpac.com website, select Downloads, then Product downloads

You will see the following screen

Follow the Surpac Vision link to the product download links as shown below

Click the link for the product you wish to download, in this case V52c Surpac Vision.

14

Trang 18

Enter your details as in the example below, then click Download Now

On the following form, click Save

Trang 19

On the following form, select any temporary directory, then click Save

Once the download has completed, run v52c_vision.msi by double clicking on it

On the following form, click Run

16

Trang 20

On the following form, click Next >

Click the button to accept the terms of the licence agreement and continue with the

installation, then click Next >

If you do not accept the terms of the license agreement, the installation cannot continue

Trang 21

On the following form, click Next >

Note: Although, you may use the Change… option to select another destination folder for the

program, it is strongly recommended that you leave this as the default location DO NOT

install the software in any directory beneath C:\Program Files\

On the following form, ensure that the boxes for Surpac Vision and Surpac Vision Demo

Data are selected The Demo Data is required for the tutorials contained within the software

Click Next >

18

Trang 22

On the following form, click Install to start the installation process

When the form below is displayed, the software installation is complete

Click Finish

Trang 23

Installing the V52c Reference Manual

From the www.surpac.com website, select Downloads, then Product downloads

You will see the following screen

Follow the Surpac Vision link to the product download links as shown below

Click the link for the product you wish to download, in this case V52c Reference Manual

20

Trang 24

Enter your details as in the example below, then click Download Now

On the following form, click Save

Trang 25

On the following form, select any temporary directory, then click Save

On the following form, click Run

22

Trang 26

On the following form, click Next >

Click the button to accept the terms of the licence agreement and continue with the

installation, then click Next >

If you do not accept the terms of the license agreement, the installation cannot continue

Trang 27

To install to the default directory, click Next > on the following form

Note: Although, you may use the Change… option to select another destination folder for the

program, it is strongly recommended that you leave this as the default location DO NOT

install the software in any directory beneath C:\Program Files\

On the form below, ensure that the Reference Manual is selected and click Next >

24

Trang 28

On the following form, click Install

On the following form, click Finish

Trang 29

3 Starting the software

Following the installation of Surpac Vision, an icon has been placed on the desktop screen of your computer Starting the software is simply a matter of double-clicking the icon shown below and waiting for the software to start

Please be patient as the software needs to check licensing details and load custom settings before it is ready to use

Alternatively, you can start the software as shown below by selecting Start, All Programs, Surpac Minex Group then Surpac Vision V5.2c

Summary

You should now understand how to install and start the software Contact your local Surpac Minex Support Office if you have encountered any difficulties

26

Trang 30

Surpac Licencing

Overview

The following concepts will be presented in this chapter:

1 Local vs Network Licencing

2 Setting up a Local Licence

3 Setting up a Network Licence

Requirements

Prior to performing the exercises in this chapter, you should have:

• Installed Surpac Vision

• Your Surpac Licence details at hand

1 Local vs Network Licencing

To access all the functionality of Surpac Vision, a user needs to have a valid licence The licence of Surpac Vision is controlled by a hardware sentinel that is issued upon purchase of the software This licence can be either “Local” or “Network”

A Local licence means that a Surpac Sentinel must be plugged into the back of the PC that is running the software These Sentinels, sometimes known as a “dongle” or “hardware lock”, can be attached to available USB or Parallel ports A Local licence will require both the Sentinel and a valid “token” number for the software to work correctly

A Network licence is one that is setup on a “server” computer This “server” computer will administer valid licences to other computers on the same network that request a licence

A Network licence also requires the Sentinel to be attached to the server computer as well as valid token numbers

If the software doesn’t detect the presence of either a valid Local or Network licence, a user can choose a third licence type called “None” This will allow the user to start the software, but limits the functionality to viewing and displaying different file types

Trang 31

2 Setting up a Local Licence

The description which follows assumes that you are installing a single user “stand-alone” licence for a newly-installed version of the software In order to proceed, you will need the following:

• Surpac Vision v5.2 installed, as previously described in the Installation section

• USB or Parallel Sentinel from Surpac Minex Group

• A valid token number

If you do not have all of these, please contact your local support office

Insert the sentinel into the appropriate USB or Parallel port

Start the software, as previously described in the Installation section

Next, you should see the form below Select local, then click Apply

Note: If you do not see the form, and the software starts, one of several conditions may be

occurring:

• A network licence has been detected

• The icon you have chosen to start up the software may have been directed to use the licence type of “none” or a network licence

• The sentinel driver has not been installed

• A local licence has previously been installed

If you see the following error message:

Click OK

28

Ngày đăng: 09/10/2016, 12:00

TỪ KHÓA LIÊN QUAN

w