Weaving Plan

CHAPTER TWO: CHAPTER TWO: WEAVING WEAVING PLAN PLAN [...]... of Weaving Plan Vs Dobby Weaving Machine Healdframe/Shaft – up and down motion for warp yarn to form shedding process Weaving Plan; Draft Fabric Formation – combination of warp and weft interlacing due to shedding motion (shaft), controlled by pattern controlled mechanism (dobby) Weaving Plan; Weave Dobby Mechanism – controlling the healdframe/shaft to built the fabric design Weaving Plan; Lifting Plan. .. Lifting Plan In the draft, there are 5 horizontal spaces which represent the shafts There are 10 vertical spaces in the lifting plan, equal to the number of weft threads in the weave repeats 2.7 Elements Arrangement on Weaving Plan C B Lifting Plan on Left Position Lifting Plan on Right Position Task 1: Construct a weaving Plan from a Given Weave Task 2: Construct a Weave from a Given Draft and Lifting Plan. .. intersections in the weave repeat and for a weaker system of warp threads 1.2 Weaving Plan Weaving plan is a characteristic of process conditions of fabric production on the loom, expressed in graphical form”  Consists of 3 elements placed in certain order: 1 Repeat of weave, example plain, twill and sateen 2 Draft or drawing-in 3 lifting plan - Determines the order of lifting and lowering the shafts in the... Position Lifting Plan on Right Position Task 1: Construct a weaving Plan from a Given Weave Task 2: Construct a Weave from a Given Draft and Lifting Plan Task 3: Construct a Draft from a Given Lifting Plan and Weave  . threads. threads.