```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT A N I N T E R N AT I O N A L CO D E 2007 ASME Boiler & Pressure Vessel Code 2008a Addenda July 1, 2008 IX QUALIFICATION STANDARD FOR WELDING AND BRAZING PROCEDURES, WELDERS, BRAZERS, AND WELDING AND BRAZING OPERATORS ASME Boiler and Pressure Vessel Committee Subcommittee on Welding U090W8 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT Date of Issuance: July 1, 2008 This international code or standard was developed under procedures accredited as meeting the criteria for American National Standards and it is an American National Standard The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals The footnotes in this document are part of this American National Standard ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher Library of Congress Catalog Card Number: 56-3934 Printed in the United States of America The American Society of Mechanical Engineers Three Park Avenue, New York, NY 10016-5990 Copyright © 2008 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All rights reserved Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT A N I N T E R N AT I O N A L CO D E 2007 ASME Boiler & Pressure Vessel Code 2007 Edition July 1, 2007 IX QUALIFICATION STANDARD FOR WELDING AND BRAZING PROCEDURES, WELDERS, BRAZERS, AND WELDING AND BRAZING OPERATORS ASME Boiler and Pressure Vessel Committee Subcommittee on Welding ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT Date of Issuance: July 1, 2007 (Includes all Addenda dated July 2006 and earlier) This international code or standard was developed under procedures accredited as meeting the criteria for American National Standards and it is an American National Standard The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals The footnotes in this document are part of this American National Standard The above ASME symbols are registered in the U.S Patent Office “ASME” is the trademark of the American Society of Mechanical Engineers No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher Library of Congress Catalog Card Number: 56-3934 Printed in the United States of America Adopted by the Council of the American Society of Mechanical Engineers, 1914 Revised 1940, 1941, 1943, 1946, 1949, 1952, 1953, 1956, 1959, 1962, 1965, 1968, 1971, 1974, 1977, 1980, 1983, 1986, 1989, 1992, 1995, 1998, 2001, 2004, 2007 The American Society of Mechanical Engineers Three Park Avenue, New York, NY 10016-5990 Copyright © 2007 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All Rights Reserved Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - ASME collective membership mark SUMMARY OF CHANGES Addenda to the 2007 Edition of the Code are issued in the form of replacement pages Revisions, additions, or deletions are incorporated directly into the affected pages It is advisable, however, that all replaced pages be retained for reference Replace or insert the pages listed Changes given below are identified on the pages by a margin note, A08, placed next to the affected area Revisions to the 2007 Edition are indicated by 07 For the listing below, the Page references the affected area A margin note, A08, placed next to the heading indicates Location Revisions are listed under Change ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - The Record Numbers listed below are explained in more detail in “List of Changes in Record Number Order” following the Summary of Changes Page Location Change (Record Number) xi–xxi Roster Updated to reflect 2008 Addenda 1, QW-100.3 Penultimate paragraph revised (04-600) QW-161.4 Revised (06-1437) 40 QW-261 For QW-409.4, Supplementary Essential deleted (07-616) 46 QW-284 In eighth sentence, second P-No revised (05-963) 53 QW-304 In first paragraph, P-Nos revised (05-963) 54 QW-305 In first paragraph, P-Nos revised (05-963) 55 QW-322.1(a) In second line, “qualification” corrected by errata (08303) 59 QW-384 In second sentence of first paragraph, second P-No revised (05-963) 61 QW-403.3 Revised (07-339) 62 QW-403.6 Last sentence revised (07-1534) 63 QW-404.5 In last paragraph, last sentence revised (05-1604) 64 QW-404.7 Second sentence revised (07-1534) QW-404.12 First and second paragraphs revised (05-1604) QW-405.2 Last sentence revised (07-1534) QW-406.3 Last sentence revised (07-1534) QW-410.9 Last sentence revised (07-1534) QW-410.10 Last sentence revised (07-1534) 73 QW-420.1 (1) In in-text table, under Welding, second entry revised (05-963) (2) Penultimate paragraph revised (04-600) 77–81 QW/QB-422 (1) For SA-213, S31277 deleted (06-1500) (2) For SA-213, S30600 and S30601 deleted by errata (07-1967) 82 QW/QB-422 (1) For SA-240, S43932 added (07-1187) (2) For second line of SA-249, S31254, Nominal Composition corrected by errata to read “20Cr-18Ni6Mo” (07-1527) 66 70 (c) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT Page Location Change (Record Number) (3) For SA-249, S31277 deleted (06-1500) 83 QW/QB-422 For SA-250, Grade T12, UNS No corrected by errata to read “K11562” (07-1967) 85 QW/QB-422 (1) For SA-312, S30601 deleted by errata (07-1967) (2) For SA-312, Product Form entries of S31050, S31254, S32100, and S32109, corrected by errata (07-1527) (3) For SA-312, S31277 deleted (06-1500) 86 QW/QB-422 For first line of SA-336, Grade corrected by errata to read “F3VCb” (07-1967) 89, 90 QW/QB-422 For eighth and ninth lines of A 381, “to” in Product Form corrected to “≤” by errata (07-1527) 93, 94 QW/QB-422 (1) For SA-479, S30601 deleted by errata (07-1967) (2) For SA-479, S31277 deleted (06-1500) 95–99 QW/QB-422 (1) For SA-508, K21590, Brazing P-No added (07-1533) (2) For SA-541, K31835, Brazing P-No added (07-1533) (3) For SA-542, K31835, Brazing P-No added (07-1533) 100, 100.1 QW/QB-422 (1) For first line of SA-612, Minimum Specified Tensile corrected by errata to read “81 (560)” (07-1527) (2) For A 618, Grades Ia and Ib added by errata (07-1967) (3) For both lines of A618, K12609, Grade entries corrected by errata to read “II” (07-1967) (4) SA-656 added (02-3339) 107 QW/QB-422 For SA-832, K31835, Brazing P-No added (07-1533) 108 QW/QB-422 For all API 5L lines, “tubes” in Product Form corrected by errata to read “tube” (07-1527) 109–111 QW/QB-422 (1) For first line of SA/EN 10028-2, Product Form revised (01-610) (2) For SA/EN 10028-2, Grade P295GH, 62.5 (430) Minimum Specified Tensile added (01-610) (3) For second line of SA/EN 10028-3, Grade corrected by errata to read “P275NH” (07-391) (4) SA/EN 10028-7 added (06-1330) (5) SA/GB 6654 added (05-533) (6) SA/JIS G4303 added (03-386) 112 QW/QB-422 (1) For SB-163, N08811, Brazing P-No added (07-1533) (2) For SB-166, SB-167, and SB-168, UNS No N06045, Brazing P-No added (07-1533) (3) For SB-166, N06601, Product Form entry corrected by errata to read “Rod, bar & wire” (07-1527, 08-323) (4) For SB-167, N06601, Product Form entry corrected by errata to read “Smls pipe & tube” (07-1527, 08-323) 113 QW/QB-422 For SB-187, C10200 and C11000, Brazing P-No’s added (07-1533) 114 QW/QB-422 (1) For B-210, A95456, Brazing S-No added (07-1533) (2) SA-213, S31277 deleted (06-1500) 115 QW/QB-422 (1) For SB-241, A93003, Product Form entry corrected by errata to read “Smls pipe & tube” (07-1527) (2) SA-249, S31277 deleted (06-1500) (3) For SB-265, Grades 2H, 7H, 16H, and 26H added (06-844) (d) ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT Page Location Change (Record Number) 116–118 QW/QB-422 (1) SA-312, S32177 deleted (06-1500) (2) For SB-338 and SB-348, Grades 2H, 7H, 16H, and 26H added (06-844) (3) For SB-348, R52402, Brazing P-No added (07-1533) (4) For SB-363, Grades WPT 7H, WPT 16, WPT 16H, and WPT 26H added (06-844) (5) For existing SB-363 lines, Grades and Product Forms revised (06-844) (6) For SB-366, N06210 added (03-752) 119 QW/QB-422 (1) (2) (3) (4) For SB-366, R20033, For SB-381, R50400, For SB-381, R52400, For SB-381, R52402, added (07-1533) (5) For SB-381, R52402, (6) For SB-381, R52404, Brazing P-No added (07-1533) Grade F-2H added (06-844) Grade F-7H added (06-844) Grade F-16, Brazing P-No Grade F-16H added (06-844) Grade F-26H added (06-844) 120 QW/QB-422 For SB-462, N06059, Welding and Brazing P-No’s corrected by errata to “43” and “111”, respectively (07-1527) 121–126 QW/QB-422 (1) For SA-479, S31277 deleted (06-1500) (2) For SB-515 and SB-564 lines with UNS No N08811, Brazing P-No added (07-1533) (3) For SB-516, SB-517, and SB-564 lines with UNS No N06045, Brazing P-No added (07-1533) (4) For SB-564, N06210 added (03-752) (5) For SB-564, N10665 added (06-1641) (6) UNS No N06210 added to SB-574, SB-575, SB-619, SB-622, and SB-626 (03-752) (7) For SB-564, SB-619, SB-622, SB-625, SB-626, and SB649 lines with UNS No R20033, Brazing P-No’s added (07-1533) 127, 127.1 QW/QB-422 (1) For first line of SB-688, Brazing P-No added (07-1533) (2) For SB-861, Grades 2H, 7H, 16, 16H, and 26H added (06-844) (3) For SB-862, Grades 2H, 7H, 16, 16H, and 26H added (06-844) (4) SB/EN 1706 added (05-963) 128 QW-423.1 In in-text table, second entry under both columns revised (05-963) 130 QW-432 Under Copper and Copper Alloys, F-No 33, ERCuSn-C added (07-1714) 132 QW-432 Under Nickel and Nickel Alloys, F-No 43, SFA-5.34 added (07-1703) 158 QW-462.4(a) Title revised (07-1636) QW-462.4(b) Title revised (07-1636) 169 QW-462.10 For both Customary and SI units, P-Nos in column heads corrected by errata (07-1967) 170 QW-462.11 For SI units, P-No in column head corrected by errata (07-1967) 182, 183 QW-466.1 (1) In table, last entry for both Customary and SI units revised (05-1219) ```,,,,,,``,`,``,,`````,`,`,``- Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS (e) Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT Page Location Change (Record Number) (2) General Note (e) added (05-1219) 241, 242 Form QW-482 Revised (06-1469) 243, 244 Form QW-483 Revised (06-1469) 245 Form QW-484A Revised (06-1469) 246 Form QW-484B Revised (06-1469) 247 Form QW-485 Revised (06-1469) 251–264.1 Nonmandatory Appendix D Table updated to reflect QW/QB-422 (02-3339, 03-386, 03-752, 05-533, 05-963, 06-1330, 06-1500, 06-1641, 07-120, 07-1187, 07-1527, 07-1967) 265 Mandatory Appendix E Line below title revised (07-295) NOTE: Volume 58 of the Interpretations to Section IX of the ASME Boiler and Pressure Vessel Code follows the last page of this Addenda (f) ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT LIST OF CHANGES IN RECORD NUMBER ORDER Record Number 01-610 02-3339 03-386 03-752 04-600 05-533 05-963 05-1219 05-1604 06-844 06-1330 06-1437 06-1469 06-1500 06-1641 07-120 07-295 07-339 07-391 07-616 07-1187 07-1527 07-1533 07-1534 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - 07-1636 07-1703 07-1714 07-1967 08-303 08-323 Change QW/QB-422 — SA/EN 10028-2, P295GH added for Plate, 6" to 10" (150 to 250 mm) QW/QB-422 and Nonmandatory Appendix D — SA-656/SA-656M added QW/QB-422 and Nonmandatory Appendix D — SA/JIS G4303 added QW/QB-422 and Nonmandatory Appendix D — UNS N06210 added to SB-366, SB-564, SB-574, SB-575, SB-619, SB-622, and SB-626 (Incorporation of Code Case 2302) QW-100.3 — Added reference to QW-420.1 for limitations on use of older WPSs, PQRs, and WPQs QW-420.1 — Revised to identify limitations to WPSs and PQRs when materials have been assigned new Por S-Numbers which were not in existence for the procedure qualification test coupon QW/QB-422 and Nonmandatory Appendix D — SA/GB 6654, 16MnR added (Incorporation of Code Case 2506) QW-284, QW-304, QW-305, QW-384, QW-420.1, and QW-423.1 — Revised to account for new P-No 26 classification of SB/EN 1706 (EN AC-43000) QW/QB-422 and Nonmandatory Appendix D — SB/EN 1706 (EN AC-43000) added QW-466.1 — Revised bend test fixture dimensions for bend tests involving base metals having less than 20% elongation and macro-etch specimen test for base metals with less than 3% elongation QW-404.5 — Revised to address filler metals having a "G" classification within Section II, Part C, SFA Specifications QW-404.12 — Revised to address filler metals having a "G" classification within Section II, Part C, SFA Specifications QW/QB-422 — UNS R50400, R52400, R52402, and R52404 added to SB-265, SB-338, SB-348, SB-363, SB-381, SB-861, and SB-862 (Incorporation of Code Case 2497-2) QW/QB-422 and Nonmandatory Appendix D — SA/EN 10028-7 added QW-161.4 (1) Reference to QW-462.3(a), Note (b) corrected (2) Revised to clarify that subsized bend specimens are acceptable for weld coupons from small diameter pipe Revised nonmandatory welding forms (QW-482, QW-483, QW-484A, QW-484B, and QW-485) to reflect curent welding variables and terminology in Section IX QW/QB-422 and Nonmandatory Appendix D — UNS S31277 deleted from SA-182, SA-213, SA-249, SA-312, SA-479, and SA-480 QW/QB-422 and Nonmandatory Appendix D — UNS N10665 added to SB-564 Nonmandatory Appendix D — UNS C12500 deleted from SB-152 Mandatory Appendix E — "AWS" added to introductory text QW-403.3 — Para (b) added to provide base metal thickness qualification guidelines for full penetration, single-sided welds with backing and partial penetration welds Errata correction QW-261 — QW-409.4 deleted as supplementary essential variable QW/QB-422 and Nonmandatory Appendix D — UNS S43932 added to SA-240 Errata Correction QW/QB-422 — Brazing P- and S-Numbers added for previously unassigned SA and SB material specifications QW-403.6, QW-404.7, QW-405.2, QW-406.3, QW-410.9, and QW-410.10 — Term "limitation" revised to "variable." QW-462.4(a) and QW-462.4(b) — Term "In Plate" added to figure heading QW-432 — SFA-5.34/SFA-5.34M added and assigned F-No 43 for all classifications QW-432 — ERCuSn-C added and assigned F-Number 33 Errata Correction Errata correction Errata correction (g) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Location Interpretation File No Page No Location Part QW (Cont’d) QW-402.10 (Cont’d) QW-402.11 QW-402.12 QW-402.14 QW-403 QW-403.1 QW-403.5 QW-403.6 QW-403.8 QW-403.9 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - QW-403.10 QW-403.11 QW-403.12 QW-403.16 QW-403.18 QW-404 File No Page No Part QW (Cont’d) QW-404 (Cont’d) IX-89-42 IX-86-80 IX-98-06 IX-98-06 IX-83-20 IX-83-116 IX-83-45 IX-89-14 IX-95-24 IX-83-92 IX-83-135 IX-86-15 IX-86-75 IX-86-78 IX-89-23 IX-89-26 IX-89-75 IX-89-78 IX-92-70 IX-92-70R IX-95-21 IX-01-30 IX-04-16 IX-83-148 IX-89-07 IX-89-86 IX-89-96 IX-92-50 IX-92-87 IX-04-04 IX-04-15 IX-83-97 IX-83-127 IX-83-152 IX-04-09 IX-95-28 IX-95-33 IX-01-01 IX-83-11 IX-83-35 IX-83-56 IX-86-75 IX-89-75 IX-89-84 IX-89-88 IX-89-61 IX-89-20 IX-89-82 IX-89-91 IX-83-106 IX-83-137 IX-86-41 IX-83-37 IX-86-03 IX-86-65 IX-86-76 BC89-364 BC87-253 BC98-009 BC98-009 BC82-496 BC84-054 BC82-385 BC88-403 BC95-194 BC83-530 BC84-397 BC85-532 BC87-136 BC87-139 BC89-096 BC89-103 BC90-443 BC90-515 BC92-450 BC00-470 BC95-318 BC02-2693 BC04-1418 BC84-417 BC88-171 BC90-734 BC90-872 BC92-217 BC93-151 BC03-1246 BC04-1595 BC83-444 BC84-224 BC84-648 BC04-065 BC96-002 BC96-001 BC00-514 BC82-300 BC82-599 BC83-078 BC87-136 BC90-443 BC90-664 BC90-768 BC90-252 BC88-478 BC90-531 BC90-680 BC83-630 BC84-399 BC86-330 BC82-770 BC85-293 BC87-031A BC87-137 215 167 389 389 14 77 30 187 359 56 87 123 165 166 196 197 235 236 311 425 353 446 471 95 184 245 250 293 323 458 467 62 83 96 464 360 367 419 11 25 36 165 235 244 246 223 194 243 247 67 87 141 26 114 155 166 QW-404.4 QW-404.5 QW-404.9 QW-404.12 QW-404.13 QW-404.14 QW-404.15 QW-404.22 QW-404.25 QW-404.26 QW-404.28 QW-404.30 QW-404.31 QW-404.32 QW-404.33 QW-404.36 QW-405.1 QW-405.2 QW-405.3 QW-406.1 QW-406.2 QW-406.3 QW-407 QW-407.1 (e) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Interpretation Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT IX-89-105 IX-98-19 IX-83-10 IX-83-87 IX-83-176 IX-83-140R IX-86-57 IX-86-84 IX-89-34 IX-89-55 IX-89-58 IX-83-46 IX-83-59 IX-83-61 IX-83-84 IX-83-96 IX-83-169 IX-95-37 IX-92-21 IX-83-06 IX-83-47 IX-83-97 IX-83-100 IX-83-89 IX-89-68 IX-89-47 IX-83-22 IX-89-91 IX-89-80 IX-89-80 IX-83-100 IX-89-61 IX-89-20 IX-89-24 IX-89-56 IX-83-112 IX-01-01 IX-01-37 IX-04-19 IX-89-20 IX-89-24 IX-83-50 IX-04-28 IX-83-177 IX-86-86 IX-92-01 IX-98-15 IX-83-161 IX-83-165 IX-83-161 IX-92-57 IX-83-130 IX-86-04 IX-86-20 IX-86-76 IX-83-29 BC91-119 BC99-409 BC82-299 BC83-340 BC85-088 BC84-250* BC86-263 BC87-491 BC89-172 BC89-371 BC90-249 BC82-751 BC82-614 BC82-831 BC83-398 BC83-442 BC85-089 BC96-315 BC91-397 BC82-245 BC82-790 BC83-444 BC83-563 BC83-402 BC90-349 BC89-370 BC82-516 BC90-680 BC90-536 BC90-536 BC83-563 BC90-252 BC88-478 BC89-097 BC90-036 BC84-038 BC00-514 BC03-263 BC05-26 BC88-478 BC89-097 BC82-872 BC06-323 BC85-092 BC87-494 BC90-501 BC98-448 BC84-618 BC85-024 BC84-618 BC92-354 BC84-252 BC85-304 BC86-010 BC87-137 BC82-763 254 409 10 54 107 137 151 174 211 220 221 31 37 39 53 62 105 369 270 32 62 63 55 227 217 15 247 237 237 63 223 194 196 221 70 419 452 472 194 196 33 478 108 175 285 397 101 103 101 296 84 114 125 166 18 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Location Interpretation File No Page No Location Part QW (Cont’d) QW-407.1 (Cont’d) QW-407.2 QW-407.4 QW-408 QW-408.2 QW-408.3 QW-408.8 QW-408.9 QW-409 QW-409.1 QW-409.4 QW-409.8 QW-410.7 QW-410.9 QW-410.15 QW-410.25 QW-410.26 QW-410.38 QW-410.42 QW-410.51 QW-415 QW-416 File No Page No Part QW (Cont’d) QW-416 (Cont’d) IX-83-30 IX-98-10 QW-407.1(b) Interpretation IX-01-20 IX-04-03 IX-04-20 IX-81-31R IX-86-47 IX-04-29 IX-83-29 IX-83-86 IX-83-145 IX-92-84 IX-04-15 IX-83-11 IX-83-35 IX-86-23 IX-92-33 IX-01-17 IX-04-22 IX-89-16 IX-95-11 IX-92-62 IX-95-16 IX-86-67 IX-83-168 IX-83-146 IX-86-67 IX-83-26 IX-83-33 IX-83-175 IX-92-40 IX-92-69 IX-92-87 IX-92-88 IX-04-12 IX-04-14 IX-01-28 IX-89-19 IX-89-36 IX-92-88 IX-95-18 IX-04-17 IX-86-55 IX-86-60 IX-86-44 IX-86-63 IX-83-69 IX-86-26 IX-04-02 IX-98-07 IX-01-06R IX-89-79 IX-89-82 IX-86-72 BC82-243 BC97-306, BC97-308 BC01-813 BC03-1212 BC05-293 BC82-097* BC86-223 BC06-462 BC82-763 BC83-294 BC84-584 BC93-586 BC04-1595 BC82-300 BC82-599 BC85-553 BC91-614 BC01-615 BC04-1301 BC88-405 BC95-002 BC92-425 BC95-095 BC87-038 BC85-059 BC84-619 BC87-038 BC82-182 BC82-617 BC85-038 BC92-110 BC92-228, BC92-353 BC93-151 BC93-593 BC04-1013 BC04-1592 BC02-2691 BC88-476 BC89-357 BC93-593 BC95-220 BC05-24 BC86-426 BC86-514A BC86-365 BC86-520 BC82-233 BC86-059 BC03-1029 BC98-009 BC98-240* BC90-531 BC90-531 BC87-091 18 395 QW-420.2 435 458 472 143 478 18 54 90 318 467 11 25 127 280 434 473 188 344 304 346 155 104 90 155 17 19 107 284 306 QW-422 QW-423 QW-423.1 QW-424 QW-424.1 QW-432 QW-442 QW-450 QW-450 vs QW-461 QW-451 323 323 466 466 445 194 212 323 351 471 146 152 142 154 42 129 457 390 426 237 243 158 IX-86-86 IX-95-07 IX-01-07 IX-83-34 IX-83-131 IX-86-88 IX-89-14 IX-89-36 IX-89-88 IX-92-08 IX-92-18 IX-95-05 IX-86-17 IX-89-15 IX-92-18 IX-01-31 IX-89-58 IX-92-65 IX-89-05 IX-89-26 IX-89-41 IX-89-75 IX-89-88 IX-95-22 IX-89-58 IX-83-24 IX-80-52R IX-92-99 IX-98-08 IX-89-46 IX-83-14 IX-83-78 IX-83-01 IX-83-05 IX-83-08 IX-83-36 IX-83-64 IX-83-104 IX-83-105 IX-83-141 IX-83-177 IX-86-31 IX-89-07 IX-89-62 IX-89-83 IX-89-99 IX-92-19 IX-92-34 IX-92-37 IX-92-68 IX-98-03 IX-98-12 IX-04-04 (f) ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT BC87-494 BC94-522 BC01-029 BC82-514 BC84-365 BC88-041 BC88-403 BC89-357 BC90-768 BC91-257 BC91-389 BC94-365 BC85-554 BC88-404 BC91-389 BC02-2694 BC90-249 BC93-148 BC88-168 BC89-103 BC89-363 BC90-443 BC90-768 BC95-251 BC90-249 BC82-588 BC80-435* BC93-762, BC93-769 BC98-131 BC89-369 BC82-302 BC83-300 BC81-702 BC82-237 BC82-265 BC82-757 BC83-222 BC83-349 BC83-471 BC84-434 BC85-092 BC86-101 BC88-171 BC90-253 BC90-532 BC91-022 BC91-390 BC91-586 BC92-097 BC92-011A BC97-479 BC98-237, BC98-238 BC03-1246 175 343 427 25 85 176 187 212 246 265 297 336 124 183 297 446 221 305 188 197 214 235 246 353 221 16 49 327 390 216 12 50 10 25 40 66 66 89 108 137 184 224 243 251 269 281 282 306 383 396 458 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Interpretation File No Page No Location Part QW (Cont’d) QW-451 (Cont’d) QW-451.1 QW-451.3 QW-452 QW-452.1 QW-452.3 QW-452.4 File No Page No Part QW (Cont’d) QW-452.4 (Cont’d) IX-04-05 IX-83-18 IX-83-43 IX-83-81 IX-83-88 IX-83-94 IX-83-102 IX-83-122 IX-86-36 IX-86-48 IX-89-18 IX-89-107 IX-01-35 IX-04-11 IX-86-40 IX-92-51 IX-92-56 IX-04-25 IX-83-07 IX-83-16 IX-83-67 IX-83-104 IX-86-30 IX-86-39 IX-89-02 IX-83-66 IX-83-88 IX-83-90 IX-89-06 IX-89-21 IX-89-52 IX-89-64 IX-89-95 IX-89-107 IX-92-35 IX-92-36 IX-92-53 IX-92-59 IX-92-89 IX-01-27 IX-83-22 IX-83-23 IX-83-66 IX-83-158 IX-86-29 IX-89-09 IX-89-69 IX-89-94 IX-89-104 IX-89-106 IX-92-59 IX-92-89 IX-95-04 IX-04-07 IX-92-45 BC03-1583 BC82-423 BC82-822 BC83-395 BC83-396 BC83-284 BC83-551 BC83-645 BC86-280 BC86-281 BC88-474 BC91-124 BC02-4075 BC04-599 BC86-329 BC92-276 BC92-308 BC05-1404 BC82-246 BC82-396 BC83-123 BC83-349 BC86-104 BC86-299 BC88-090 BC83-058 BC83-396 BC83-407 BC88-169 BC89-031 BC90-044 BC90-297 BC90-869 BC91-124 BC91-277 BC91-616 BC92-254 BC92-206 BC93-653 BC02-111 BC82-516 BC82-530 BC83-058 BC84-368 BC86-103 BC88-397 BC90-401 BC90-785 BC91-097 BC91-120 BC92-206 BC93-653 BC94-296 BC03-1686 BC92-238 458 14 29 51 54 61 65 80 139 143 193 255 451 465 141 294 295 474 13 41 66 131 140 181 41 54 55 183 195 219 225 250 255 281 282 294 303 324 441 15 15 41 99 130 185 227 249 253 254 303 324 335 459 292 QW-452.6 QW-453 QW-461.1(a) QW-461.9 QW-462 QW-462.1 QW-462.1(a) QW-462.1(d) QW-462.1(e) QW-462.3(a) QW-462.3(b) QW-462.4 QW-462.4(a) QW-462.4(b) QW-462.5 QW-462.5(a) QW-463.1(b) QW-463.2(g) QW-466 QW-466.1 QW-466.3 QW-482 (g) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Interpretation Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT IX-92-51 IX-89-57 IX-92-05 IX-92-72 IX-95-23 IX-95-41 IX-98-05 IX-98-17 IX-83-65 IX-83-28 IX-83-44 IX-83-53 IX-83-134 IX-86-29 IX-89-98 IX-92-15 IX-92-41 IX-92-46 IX-92-72 IX-92-90 IX-04-07 IX-04-24 IX-86-09 IX-89-102 IX-92-76 IX-95-02 IX-83-110 IX-92-29 IX-98-09 IX-86-45 IX-89-25 IX-83-139 IX-89-89 IX-83-95 IX-83-144 IX-89-72 IX-83-144 IX-92-51 IX-95-08 IX-89-45 IX-92-05 IX-92-52 IX-98-16 IX-83-15 IX-83-75 IX-83-51 IX-92-48 IX-92-49 IX-95-15 IX-83-73 IX-83-74 IX-83-115 IX-89-37 IX-83-109 IX-86-37 IX-86-14 BC92-276 BC90-040 BC90-632 BC93-392 BC95-428 BC97-028 BC98-009 BC98-055 BC83-225 BC82-748 BC82-838 BC83-002 BC84-396 BC86-103 BC91-003 BC91-293 BC92-035 BC92-265 BC93-392 BC93-753 BC03-1686 BC05-1195 BC85-200 BC91-086 BC93-515 BC94-181 BC83-692 BC91-473 BC97-302 BC86-366 BC89-099 BC83-629 BC90-769 BC83-301 BC84-583 BC90-042 BC84-583 BC92-276 BC94-543 BC89-368 BC90-632 BC92-252 BC98-453 BC82-388 BC83-149 BC83-881 BC92-267 BC92-268 BC95-094 BC82-866 BC82-867 BC83-279 BC89-358 BC83-689 BC86-297 BC85-483 294 221 263 312 353 376 389 403 40 18 29 35 86 130 251 267 284 292 312 324 459 474 116 253 312 333 69 279 395 142 197 88 246 61 90 233 90 294 343 216 263 294 398 13 44 34 293 293 346 43 44 77 212 68 139 123 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Location SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Location Interpretation File No Page No Location Part QW (Cont’d) QW-482 (Cont’d) QW-483 File No Page No Part QW (Cont’d) QW-492 (Cont’d) IX-89-01 IX-86-14 IX-86-70 IX-83-53 IX-86-16 IX-89-62 BC88-042 BC85-483 BC87-089 BC83-002 BC85-533 BC90-253 181 123 157 35 124 224 IX-92-43 BC92-100 291 IX-98-15 BC98-448 397 QW-500 QW-510 IX-01-14 IX-01-11 BC01-332 BC01-089 433 429 QW-540 IX-01-11 BC01-089 429 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - QW-484 QW-492 Interpretation (h) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Subject Base Metals P-Number substitution P-Number reassignment qualifying for notch toughness qualifying for test specimens thickness use of as filler metal Brazing Base Metals P-Number substitution Interpretation IX-83-20 IX-83-56 IX-83-96 IX-86-17 IX-86-18 IX-89-29 IX-89-61 IX-89-75 IX-95-21 IX-95-22 IX-95-24 IX-01-22 IX-83-92 IX-86-48 IX-89-75 IX-89-84 IX-89-96 IX-92-70 IX-92-70R IX-92-87 IX-89-37 IX-89-88 IX-01-30 IX-01-01 IX-01-19 IX-04-09 IX-04-11 IX-83-87 IX-92-74 Brazing Performance Qualification limits of qualified positions IX-01-34 File No BC82-496 BC83-078 BC83-442 BC85-554 BC85-585 BC89-176 BC90-252 BC90-443 BC95-318 BC95-251 BC95-194 BC01-679 BC83-530 BC86-281 BC90-443 BC90-664 BC90-872 BC92-450 BC00-470 BC93-151 BC89-358 BC90-768 BC02-2693 BC00-514 BC01-811 BC04-065 BC04-599 BC83-340 BC93-474 Page No Subject Brazing Procedure Specification (Cont’d) recording information on BPS IX-89-93 recording information on the IX-89-94 Brazer or Brazing Operator Qualification Test requalification of IX-86-22 14 36 62 124 125 204 223 235 353 353 359 440 54 143 235 244 250 311 425 323 212 246 446 419 435 464 465 56 File No Page No BC90-783 BC90-785 249 249 BC85-531 126 218 318 459 Brazing Test Specimens butt and scarf joints positions tension tests IX-89-49 IX-92-85 IX-04-06 BC89-372 BC93-655 BC03-1664 Certification of the PQR of the WPS IX-83-03 IX-83-03 BC82-056 BC82-056 7 qualifying viewing windows IX-89-91 IX-83-06 IX-83-22 IX-83-104 BC90-680 BC82-245 BC82-516 BC83-349 247 15 66 Cover Pass remelting of IX-83-89 BC83-402 55 IX-83-55 IX-83-44 IX-89-82 BC83-059 BC82-838 BC90-531 29 36 243 Dust amount in powdered filler metal IX-83-09 BC82-279 10 BC01-570 BC01-826 430 441 BC83-303 53 BC90-252 BC91-397 BC99-409 BC83-398 BC85-089 BC96-315 BC99-409 223 270 409 53 105 369 409 Consumable Inserts addition / deletion performance qualification Diameters, Pipe performance qualification ranges listed on the WPS 313 BC02-3541 451 Edition of Code IX-01-13 the use of the referenced edition IX-01-26 of the Code Essential Variables (see Variables) Brazing Procedure Qualification by Part QW welding IX-92-83 qualification electrode classification IX-95-13 for attaching small penetrations IX-86-73 joint design IX-01-34 qualification by proof test IX-86-53 S-Number substitution IX-92-93 BC93-527 317 BC94-035 BC86-332 BC02-3541 BC86-399 BC93-752 345 159 451 145 325 Brazing Procedure Specification combination of thicknesses IX-89-104 qualification of hard-facing IX-92-83 BC91-097 BC93-527 253 317 Filler Materials (see also SFA Specifications) change in electrode IX-83-84 classification IX-89-61 IX-92-21 IX-98-19 change in wire classification IX-83-84 IX-83-169 IX-95-37 IX-98-19 (i) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Interpretation Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - SUBJECT INDEX SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Subject Interpretation File No Filler Materials (see also SFA Specifications) (Cont’d) chemical analysis of weld IX-86-57 BC86-263 deposit electrode spacing IX-86-44 BC86-365 flux-cored consumable IX-89-105 BC91-119 nonferrous IX-83-176 BC85-088 qualifying as a welded buildup IX-83-114 BC84-070 recrushed slag IX-04-19 BC05-26 supplementary powder, addition, IX-89-80 BC90-536 deletion or increase without SFA specification IX-86-03 BC85-293 Flux active / neutral F-Numbers change in classification classification of martensitic materials use of electrodes to conform FNo Interpass Temperatures listing of on the WPS qualification of Machine Welding definition of Multiprocess Welds qualified thickness range for performance qualification qualified thickness range for procedure qualification required test specimens for procedure qualification root pass without backing with notch-toughness requirements IX-86-16 IX-83-10 IX-89-28 IX-89-46 IX-92-99 Nozzle Joint Design base metal thickness Subject Operational Control change in company name contractor’s associations of welding procedures 151 142 254 107 71 472 237 organizations not involved in Code applications Peel Test, Brazing acceptance criteria 114 124 IX-83-24 BC82-299 BC89-174 BC89-369 BC93-762 BC93-769 BC82-588 10 203 216 327 327 16 IX-89-29 BC89-176 204 IX-01-16 BC01-338 433 IX-83-41 IX-83-161 IX-83-41 IX-83-129 BC82-796 BC84-618 BC82-796 BC84-251 28 101 28 84 IX-92-43 BC92-100 291 IX-83-14 BC83-302 12 IX-89-35 IX-83-83 BC89-307 BC83-394 211 53 IX-95-33 IX-83-01 BC96-001 BC81-702 367 IX-89-01 IX-83-33 BC88-042 BC82-617 181 19 BC98-239 BC82-098 396 Nonessential Variables (see also Variables) addressing IX-98-13 ranges for IX-83-04 Normalized Materials qualified by non-normalized materials BC85-533 Page No IX-83-86 BC83-294 54 IX-86-31 BC86-101 137 Performance Qualification A-number substitution alternate base materials for welder qualification applied lining or clad plate by several contractors simultaneously change in angle groove change in vertical welding combination of welding processes consumable inserts corrosion-resistant weld metal overlay diameter limitation editorial correction to WPQ effective operational control of electrodes employer’s responsibility (j) ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT Interpretation File No Page No IX-83-25 IX-83-68 IX-83-03 IX-83-151 IX-86-64 IX-83-39 BC81-160 BC83-040 BC82-056 BC84-620 BC86-395 BC82-792 16 41 96 154 26 IX-89-74 IX-98-01 BC90-429 BC97-304 234 383 IX-86-84 IX-89-29 IX-92-18 IX-92-18 BC87-491 BC89-176 BC91-389 BC91-389 174 204 297 297 IX-92-65 IX-01-31 IX-89-101 IX-86-25 BC93-148 BC02-2694 BC91-085 BC86-018 305 446 252 128 IX-86-81 IX-95-32 IX-86-69 IX-92-01 IX-92-01 BC87-242 BC95-302 BC87-088 BC90-501 BC90-501 173 367 156 285 285 IX-92-26 IX-83-06 IX-83-22 IV-86-32 BC91-470 BC82-245 BC82-516 BC86-222 273 15 138 IX-86-58 IX-86-66 IX-89-79 IX-89-71 IX-92-72 IX-95-23 IX-95-30 IX-98-14 IX-89-09 IX-89-69 IX-89-98 IX-89-104 IX-89-106 IX-92-15 IX-92-41 IX-92-90 IX-95-04 IX-92-96 IX-89-10 IX-95-20 IX-95-32 IX-95-30 IX-01-15 BC86-457 BC87-036 BC90-531 BC90-039 BC93-392 BC95-428 BC96-073 BC98-447 BC88-397 BC90-401 BC91-003 BC91-097 BC91-120 BC91-263 BC92-035 BC93-753 BC94-296 BC93-755 BC88-398 BC95-302 BC95-302 BC96-073 BC01-641 152 155 237 233 312 353 361 397 185 227 251 253 254 267 284 324 335 326 186 352 367 361 433 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Subject Interpretation ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Performance Qualification (Cont’d) fillet welds IX-83-04 IX-83-103 IX-86-28 IX-92-45 fillet welds qualified by groove IX-83-16 welds IX-83-98 IX-86-74 IX-89-31 IX-89-87 F-Number qualification IX-79-52R IX-80-52R IX-98-08 further training IX-83-13 groove welds IX-83-16 IX-89-20 IX-89-89 IX-89-94 IX-95-04 IX-04-23 hard facing weld metal overlay IX-92-02 IX-95-23 machine welding IX-95-31 macro examination IX-92-24 maintenance of IX-86-82 manual / machine welding IX-86-68 substitution IX-89-38 manual/semiautomatic welding IX-95-36 substitution multiprocess IX-83-14 IX-83-107 IX-86-13 IX-86-23 IX-86-39 operator variables IX-83-163 IX-86-05 partial-penetration groove welds IX-83-155 P-Number substitutions IX-83-40 IX-83-42 IX-83-63 IX-83-70 IX-83-116 IX-83-137 IX-86-17 IX-86-18 IX-86-41 IX-86-51 IX-86-72 IX-89-15 IX-89-33 position IX-83-28 IX-83-108 IX-83-162 IX-83-170 IX-83-177 IX-86-29 File No Page No BC82-098 BC83-237 BC86-062 BC92-238 BC82-396 65 130 292 13 BC84-450 BC87-134 BC89-178 BC90-745 BC79-046* BC80-435* BC98-131 BC82-346 BC82-396 BC88-478 BC90-769 BC90-785 BC94-296 BC05-784 BC90-518 BC95-428 BC96-141 BC91-280 BC87-252 BC87-039 63 165 204 245 49 49 390 12 13 194 246 249 335 474 262 353 361 272 173 156 BC89-359 BC96-314 213 369 BC82-302 BC83-550 BC85-507 BC85-553 BC86-299 BC85-022 BC85-306 BC84-692 BC82-794 BC82-803 BC83-122 BC83-270 BC84-054 BC84-399 BC85-554 BC85-585 BC86-330 BC86-390 BC87-091 BC88-404 BC89-175 BC82-748 BC83-639 BC84-663 BC85-091 BC85-092 BC86-103 12 67 118 127 140 102 114 98 27 28 40 42 77 87 124 125 141 145 158 188 205 18 68 102 105 108 130 Subject Performance Qualification (Cont’d) position (Cont’d) IX-86-30 IX-86-35 IX-89-24 IX-89-40 IX-89-98 IX-92-15 IX-92-41 IX-92-46 IX-92-90 IX-04-24 process substitution IX-86-46 qualification with and without IX-92-96 backing IX-01-09 questioning of ability IX-86-24 records IX-95-38 IX-01-36 recording information on WPQ IX-86-13 IX-86-72 IX-89-30 IX-89-47 renewal of IX-83-154 IX-83-159 IX-83-164 IX-83-166 IX-83-167 IX-86-07 IX-86-19 IX-86-50 IX-86-52 IX-89-32 IX-92-12 IX-92-22 IX-92-47 IX-92-64 IX-01-21 IX-04-13 requalification after failure IX-92-56 requalification after failure and IX-92-73 further training requalification for friction weld IX-92-58 operator requalifying for Addenda IX-83-112 changes responsibility of IX-83-21 IX-83-100 IX-83-101 IX-83-106 IX-83-113 IX-83-117 IX-83-121 IX-83-124 IX-83-128 IX-83-131 IX-83-132 IX-83-133 (k) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Interpretation Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT File No Page No BC86-104 BC86-266 BC89-097 BC89-362 BC91-003 BC91-263 BC92-035 BC92-265 BC93-753 BC05-1195 BC86-219 BC94-102 131 139 196 214 251 267 284 292 324 474 143 326 BC01-032 BC86-001 BC96-132 BC02-4198 BC85-507 BC87-091 BC89-177 BC89-370 BC84-689 BC84-690 BC85-023 BC85-030 BC85-031 BC85-560 BC85-587 BC86-389 BC86-394 BC89-100 BC91-264 BC91-425 BC92-266 BC92-464 BC01-035 BC04-1457 BC92-308 BC93-468 428 128 375 452 118 158 204 217 97 99 103 104 104 115 125 144 145 203 266 271 292 305 439 466 295 313 BC92-357 296 BC84-038 70 BC82-499 BC83-563 BC83-529 BC83-630 BC83-055 BC84-133 BC84-134 BC84-149 BC84-226 BC84-365 BC84-366 BC84-370 15 63 64 67 71 78 80 81 83 85 85 86 SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Interpretation Performance Qualification (Cont’d) responsibility of (Cont’d) IX-83-134 IX-92-25 IX-98-14 revoking of qualification IX-95-19 IX-04-21 simultaneous qualification of IX-92-39 welders IX-95-14 special process IX-89-92 strip electrodes test coupon qualification test specimen movement thickness limitation type of tests required units of measurement using radiography ultrasonic examination visual examination visual inspection welder / operator IX-95-30 IX-92-31 IX-86-77 IX-83-90 IX-83-158 IX-89-02 IX-89-24 IX-89-32 IX-89-64 IX-89-83 IX-89-95 IX-89-96 IX-92-36 IX-92-35 IX-92-32 IX-92-51 IX-92-59 IX-95-23 IX-95-28 IX-98-05 IX-98-17 IX-92-17 IX-92-23 IX-04-27 IX-83-19 IX-83-52 IX-83-57 IX-83-91 IX-83-142 IX-83-173 IX-83-174 IX-86-34 IX-86-79 IX-86-85 IX-89-21 IX-95-35 IX-92-71 IX-95-17 IX-01-03 IX-89-50 IX-89-48 IX-89-51 IX-89-57 IX-89-63 IX-89-108 IX-95-39 File No Page No BC84-396 BC91-415 BC98-447 BC95-221 BC05-528 BC92-121 86 272 397 352 473 283 BC95-040 BC90-681, BC90-691 BC96-073 BC91-613 BC87-138 BC83-407 BC84-368 BC88-090 BC89-097 BC89-287 BC90-297 BC90-532 BC90-869 BC90-872 BC91-616 BC91-277 BC91-631 BC92-276 BC92-206 BC95-428 BC96-002 BC98-009 BC98-055 BC91-315 BC90-494 BC05-1215 BC82-440 BC83-001 BC83-079 BC83-528 BC84-548 BC85-013 BC84-557 BC86-265 BC87-140 BC87-492 BC89-031 BC96-287 BC93-365 BC95-035 BC00-519 BC90-035 BC89-360 BC90-038 BC90-040 BC90-254 BC91-157 BC96-331 345 248 Subject Performance Qualification (Cont’d) welder / operator (Cont’d) IX-98-11 IX-98-14 welder / operator identification IX-83-138 welding of joint by more than IX-89-06 one welder when welding PQR coupon IX-83-31 IX-86-90 IX-89-48 with a tube end gun IX-83-67 with / without backing IX-83-168 IX-86-23 plasma arc welding IX-89-40 361 280 166 55 99 181 196 205 225 243 250 250 282 281 280 294 303 353 360 389 403 268 270 477 14 34 36 56 89 106 107 138 167 174 195 368 312 351 420 218 217 219 221 224 256 375 P-Numbers chemical analysis / mechanical properties of classification of welding of non-pressure retaining attachments Positions, Brazing qualification of flow positions Positions, Welding fillet welds in vertical-up progression listing on the WPS qualification of 2G position qualification of 6G position recording welder qualification for stud welding vertical-up progression Postweld Heat Treatment addition of change in soaking time change in base metal thickness limit on maximum time P8 material reporting results temperature ranges transformation temperatures versus post heating when lower critical temperature has been exceeded (l) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Interpretation Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT File No Page No BC98-133 BC98-447 NI84-058 BC88-169 395 397 88 183 BC82-395 BC88-091 BC89-360 BC83-123 BC85-059 BC85-553 BC89-362 19 176 217 41 104 127 214 IX-86-88 BC88-041 176 IX-83-156 IX-92-08 IX-95-05 IX-89-05 BC84-697 BC91-257 BC94-365 BC88-168 98 265 336 183 IX-86-02 BC85-292 113 IX-83-82 BC83-303 52 IX-83-44 IX-83-75 IX-04-07 IX-83-53 BC82-830 BC83-149 BC03-1686 BC83-002 29 44 459 35 IX-04-28 IX-83-50 IX-86-86 BC06-323 BC82-872 BC87-494 478 33 175 IX-86-47 IX-83-130 IX-92-33 IX-04-15 IX-83-145 IX-04-03 IX-98-10 BC86-223 BC84-252 BC91-614 BC04-1595 BC84-584 BC03-1212 BC97-306, BC97-308 BC82-097* BC82-243 BC06-462 BC82-300 BC85-553 BC87-137 BC01-813 BC82-763 BC86-010 BC82-599 143 84 280 467 90 458 395 IX-81-30R IX-83-30 IX-04-29 IX-83-11 IX-86-23 IX-86-76 IX-01-20 IX-83-29 IX-86-20 IX-83-35 18 478 11 127 166 435 18 125 25 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Subject SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Preheat Temperature maintenance of Procedure Qualification acceptance criteria equipment essential variables impact testing joints limits of qualified positions for procedures liquid penetrant examination Interpretation File No Page No IX-83-82 IX-83-161 BC83-303 BC84-618 52 101 IX-01-18 IX-95-42 IX-89-54 IX-89-59 IX-01-06 IX-89-23 IX-98-06 IX-95-13 BC01-772 BC97-044 BC89-367 BC90-250 BC98-240 BC89-096 BC98-009 BC94-035 435 377 220 222 421 196 389 345 BC91-278 BC95-428 BC98-239 BC00-654 BC90-253 BC94-235 BC02-3449 BC98-448 BC93-561 BC96-060 BC94-570 BC02-4075 BC90-531 BC92-110 BC94-235 BC02-3896 267 353 396 420 224 334 447 397 315 368 344 451 237 284 334 447 BC85-132 BC91-396 BC82-056 BC82-790 BC85-532 BC89-362 BC92-011 BC92-206 BC92-011A BC94-008 BC05-25 BC90-492 105 270 32 123 214 291 303 306 326 472 233 BC90-039 BC90-632 BC91-054 BC91-472 BC92-252 BC92-305 BC97-028 BC98-453 BC91-263 236 263 264 273 294 295 376 398 266 BC04-1418 BC92-011B, BC92-228 BC95-027 471 306 IX-92-13 IX-95-23 nonessential variables IX-98-13 IX-01-05 partial penetration groove welds IX-89-62 IX-95-03 root pass IX-01-32 seal welds IX-98-15 subcontracting IX-92-78 substrate deposit IX-95-34 tension tests IX-95-09 thickness limits IX-01-35 variables IX-89-79 IX-92-40 weld repair and buildup tests IX-95-03 welds with buttering IX-01-33 Procedure Qualification Record additions / corrections to IX-83-171 applied lining IX-92-20 certification of IX-83-03 combining PQRs IX-83-47 IX-86-15 IX-89-40 IX-92-42 IX-92-59 IX-92-68 IX-92-95 IX-04-18 corrosion-resistant weld metal IX-89-77 overlay, chemical analysis IX-89-71 IX-92-05 IX-92-06 IX-92-28 IX-92-52 IX-92-54 IX-95-41 IX-98-16 dissimilar base metal IX-92-11 thicknesses IX-04-16 IX-95-12 Subject Procedure Qualification Record (Cont’d) dissimilar base metal thicknesses (Cont’d) IX-98-20R IX-01-23 IX-04-11 electrical characteristics IX-92-88 IX-01-28 IX-04-12 IX-04-14 groove and fillet welds IX-92-11 IX-92-37 IX-92-34 IX-95-28 hardfacing overlay, examination IX-89-77 IX-92-03 IX-92-04 IX-95-23 IX-95-34 IX-98-16 information on IX-86-70 IX-89-16 listing of backing IX-86-33 listing of preheat temperature IX-83-165 listing of shielding gas purity IX-95-11 macro examination IX-92-24 manufacturer’s or contractor’s IX-89-73 responsibility IX-92-07 IX-92-09 IX-92-16 IX-92-25 IX-92-66 IX-92-67 IX-92-80 IX-92-81 IX-92-92 IX-95-25 IX-95-26 IX-95-27 IX-95-29 IX-95-40 meeting requirements of older editions notch toughness testing oscillation P-Number reassignment recording test results 345 (m) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Interpretation Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT File No Page No BC99-539* BC01-789 BC04-599 BC93-593 BC02-2691 BC04-1013 BC04-1592 BC91-263 BC92-097 BC91-586 BC96-002 BC90-492 BC90-523 BC90-530 BC95-428 BC96-060 BC98-453 BC87-089 BC88-405 BC82-262 BC85-024 BC95-002 BC91-280 BC90-319 426 440 465 325 445 466 466 266 282 281 360 236 262 263 353 368 398 157 188 138 103 344 272 234 264 265 268 272 305 306 316 316 325 359 359 360 360 376 IX-98-18 IX-04-26 IX-83-99 BC91-156 BC91-260 BC91-314 BC91-415 BC93-377 BC93-391 BC92-584 BC92-306 BC93-678 BC95-252 BC95-303 BC95-482 BC95-302 BC93-431, BC95-222 BC99-025 BC05-1196 BC83-472 IX-83-148 IX-92-86 IX-86-75 IX-86-78 IX-92-50 IX-04-04 IX-98-07 IX-01-22 IX-83-26 IX-83-139 IX-83-172 IX-83-175 BC84-417 BC93-658 BC87-136 BC87-139 BC92-217 BC03-1246 BC98-009 BC01-679 BC82-182 BC83-629 BC85-135 BC85-038 95 318 165 166 293 458 390 440 12 88 106 107 403 477 63 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Subject SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Interpretation Procedure Qualification Record (Cont’d) requalifying IX-89-56 IX-89-58 IX-92-62 IX-92-97 revising WPSs IX-92-57 special process IX-89-92 File No Page No IX-92-44 IX-92-84 IX-95-21 IX-95-22 IX-98-04 IX-01-17 IX-04-10 IX-92-19 BC90-036 BC90-249 BC92-425 BC94-167 BC92-354 BC90-681, BC90-691 BC92-168 BC93-586 BC95-318 BC95-251 BC97-481 BC01-615 BC04-601 BC91-390 291 318 353 353 384 434 464 269 types of test required visual examination IX-92-53 IX-92-89 IX-95-23 IX-98-03 IX-98-05 IX-98-07 IX-98-17 IX-01-01 IX-04-11 IX-92-17 IX-01-10 BC92-254 BC93-653 BC95-428 BC97-479 BC98-009 BC98-009 BC98-055 BC00-514 BC04-599 BC91-315 BC01-073 294 324 353 383 389 390 403 419 465 268 428 Process definition of performance qualification variables for IX-83-58 IX-83-69 IX-86-12 BC83-086 BC83-233 BC85-482 37 42 117 Production Welds liquid penetrant examination IX-92-13 BC91-278 267 IX-83-23 IX-86-30 IX-83-123 BC82-530 BC86-104 BC84-092 15 131 80 IX-89-37 IX-01-23 IX-92-05 IX-98-05 IX-83-66 IX-86-29 IX-83-101 IX-86-27 IX-83-07 IX-83-143 BC89-358 BC01-789 BC90-632 BC98-009 BC83-058 BC86-103 BC83-529 BC86-061 BC82-246 BC84-581 212 440 263 389 41 130 64 129 89 IX-83-88 IX-83-11 IX-04-22 BC83-396 BC82-300 BC04-1301 54 11 473 supporting WPSs thickness limits and test specimens Qualified Thickness Range performance for different positions for dissimilar base metal thicknesses for hardfacing overlay for pipe for weld overlays weld reinforcement procedure changes in later editions effect of PWHT Subject Qualified Thickness Range (Cont’d) procedure (Cont’d) for brazed laps IX-83-49 IX-86-21 for cladding IX-83-48 IX-98-16 for double-bevel groove IX-83-90 welds for dissimilar base metal IX-86-89 thickness for groove welds IX-89-100 IX-89-100R IX-98-03 for hardfacing overlay IX-92-05 IX-98-05 IX-98-16 for multiprocess procedures IX-83-83 IX-83-126 for notch toughness IX-89-86 for weld repair IX-83-93 IX-83-126 IX-83-141 IX-86-28 impact testing IX-83-81 limitation when using IX-83-18 GMAW-S IX-95-33 IX-95-28 limitations for combined IX-83-80 procedures IX-95-33 limitations of QW-451 IX-83-102 IX-83-152 IX-86-36 IX-89-83 minimum for weld metal IX-83-81 IX-89-39 ranges qualified by PQR IX-83-36 IX-83-64 IX-89-11 IX-01-12 thickness for determining IX-83-05 weld reinforcement IX-83-08 thickness used to determine IX-83-94 range IX-86-43 IX-89-18 IX-01-27 IX-04-09 221 221 304 327 296 248 File No Root Gap qualification of Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT IX-83-71 Page No BC82-871 BC86-058 BC82-870 BC98-453 BC83-407 33 126 32 398 55 BC88-089 176 BC90-663 BC90-663* BC97-479 BC90-632 BC98-009 BC98-453 BC83-394 BC84-221 BC90-734 BC83-531 BC84-221 BC84-434 BC86-062 BC83-395 BC82-423 252 261 383 263 389 398 53 82 245 56 82 89 130 51 14 BC96-001 BC96-002 BC83-388 367 360 50 BC96-001 BC83-551 BC84-648 BC86-280 BC90-532 BC83-395 BC89-361 BC82-757 BC83-222 BC88-399 BC01-201 BC82-237 367 65 96 139 243 51 213 25 40 186 430 BC82-265 BC83-284 10 61 BC86-337 BC88-474 BC02-111 BC04-065 142 193 441 464 Records (see also Procedure Qualification Record) maintenance of performance IX-83-32 BC82-598 qualification IX-92-55 BC92-307 IX-01-08 BC01-030 (n) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Interpretation BC83-230 19 295 427 43 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Subject SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Subject Root Gap (Cont’d) use of term SFA Specifications AWS classification change change of designations in a classification change of electrode classification Interpretation File No Page No IX-83-04 BC82-098 IX-83-147 IX-83-59 BC84-249 BC82-614 95 37 IX-83-61 BC82-831 39 IX-89-13 IX-92-21 IX-01-37 BC88-402 BC91-397 BC03-263 187 270 452 IX-89-08 IX-92-94 BC88-172 BC93-754 185 326 BC05-24 BC90-466 BC94-035 BC86-520 BC82-751 BC02-2692 BC90-873 BC82-713 BC01-815 BC03-274 BC87-031A BC03-274 BC92-422 471 235 345 154 31 445 251 17 441 452 155 452 304 purity IX-83-02 IX-92-62 IX-95-11 BC81-704 BC92-425 BC95-002 304 344 SI Units use of IX-83-85 BC83-003 53 change in SFA specification filler metal classification chemistry deviation classification listed in AWS specification electrode characteristics electrode classification IX-04-17 IX-89-76 IX-95-13 electrode spacing IX-86-63 heat treatment conditions IX-83-46 marking of packages IX-01-29 mechanical tests IX-89-97 use of IX-83-27 IX-01-25 IX-01-38 use of different electrode brands IX-86-65 IX-01-38 use of powdered filler metal IX-92-61 Shielding Gases procedure qualification using ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - S-Numbers qualification IX-92-98 IX-95-07 BC94-236 BC94-522 327 343 Standard Welding Procedure Specifications (SWPSs) use of IX-01-11 BC01-089 IX-01-14 BC01-332 429 433 Supplementary Essential Variables (see also Variables) qualifying changes in IX-83-79 BC83-358 IX-83-122 BC83-645 IX-83-135 BC84-397 use of IX-01-39 BC03-469 Test Specimens acceptance criteria for bend specimens Interpretation Test Specimens (Cont’d) acceptance criteria for section test IX-83-76 BC83-248 44 IX-83-120 IX-83-51 IX-86-11 IX-83-109 IX-83-60 IX-92-05 IX-92-60 IX-83-77 IX-83-78 IX-83-143 IX-83-26 IX-83-144 IX-89-72 IX-04-05 IX-83-153 IX-86-09 IX-95-08 IX-83-43 IX-01-24 BC83-474 BC82-881 BC85-420 BC83-689 BC82-749 BC90-632 BC92-421 BC83-253 BC83-300 BC84-581 BC82-182 BC84-583 BC90-042 BC03-1583 BC84-664 BC85-200 BC94-543 BC82-822 BC01-814 79 34 117 68 38 263 303 49 50 89 17 90 233 458 97 116 343 29 440 IX-83-76 IX-83-60 IX-92-10 IX-95-15 IX-98-12 44 38 265 346 396 IX-89-107 IX-83-74 IX-86-71 IX-86-37 IX-86-38 IX-92-68 BC83-248 BC82-749 BC91-261 BC95-094 BC98-237, BC98-238 BC91-124 BC82-867 BC87-090 BC86-297 BC86-298 BC92-011 255 44 157 139 140 306 IX-86-83 IX-92-37 BC87-489A BC92-097 174 282 IX-89-99 IX-86-40 IX-89-07 IX-89-45 IX-92-29 IX-83-65 IX-89-25 IX-89-90 IX-92-76 IX-92-79 IX-01-21 IX-83-15 IX-83-119 IX-92-79 IX-86-26 IX-83-38 IX-83-73 IX-86-45 BC91-022 BC86-329 BC88-171 BC89-368 BC91-473 BC83-225 BC89-099 BC90-532 BC93-515 BC93-583 BC01-035 BC82-388 BC84-253 BC93-583 BC86-059 BC82-771 BC82-866 BC86-366 251 141 184 216 279 40 197 247 314 315 439 13 79 315 129 26 43 142 bending of brazing joint clearance calibration of testing machines cold straightening of corrosion-resistant overlay determining coupon thickness dimensions recorded on PQR face and root bends, transverse failure of fillet welds for multiprocess welds for impact testing for multiprocess welds for peel or section tests grinding of overlay specimens guided-bend tests longitudinal bend mandrel size method of restraint minimum weld metal deposit thickness nondestructive testing of number of tension test specimens partial penetration product form qualification of reduced section 50 80 87 453 removal IX-83-60 BC82-749 38 IX-83-115 IX-86-61 IX-89-52 IX-95-15 BC83-279 BC86-515 BC90-044 BC95-094 77 153 219 346 roll planishing size of specimen required (o) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT File No Page No Subject SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Subject Test Specimens (Cont’d) tension, full section for small diameter pipe tension, reduced section for lap and rabbet joints, plate tension test tension test results test jig dimensions for bend tests tolerances transverse bend using radiography visual requirements Interpretation flexible welding back-up tape listing on the WPS ranges demonstrated on the PQR recording on the PQR Page No IX-89-103 BC91-096 253 IX-89-81 BC90-537 237 IX-04-01 IX-04-25 IX-92-14 IX-92-63 IX-95-06 IX-95-09 IX-98-09 IX-92-48 BC02-3586 BC05-1404 BC91-279 BC92-452 BC94-542 BC94-570 BC97-302 BC92-267 457 474 267 304 336 344 395 293 IX-92-49 IX-95-02 IX-89-107 IX-83-157 IX-86-62 IX-01-04 IX-83-149 IX-01-04 BC92-268 BC94-181 BC91-124 BC84-700 BC86-517 BC00-653 BC84-558 BC00-653 293 333 255 98 153 420 95 420 BC84-250* BC89-369 BC89-371 BC82-514 NI83-004 BC83-279 BC84-365 BC90-289 137 216 220 25 39 77 85 225 BC82-385 BC84-398 BC95-318 BC95-251 BC82-751 BC81-160 BC87-137 30 87 353 353 31 16 166 Unlisted Materials (Non-Code Material) A-Number classification IX-83-140R IX-89-46 IX-89-55 P-Numbers for IX-83-34 IX-83-62 IX-83-115 IX-83-131 identifying welding electrodes IX-89-65 in cartons qualification of IX-83-45 IX-83-136 IX-95-21 IX-95-22 SAW flux / wire combinations IX-83-46 use of filler metals IX-83-25 IX-86-76 Variables changes to the WPS File No IX-83-54 IX-89-70 IX-86-80 IX-83-03 IX-86-14 IX-89-82 IX-89-85 IX-83-40 BC83-042 BC90-430 BC87-253 BC82-056 BC85-483 BC90-531 BC90-671 BC82-794 35 227 167 126 243 244 27 IX-83-26 BC82-182 17 Subject Page No BC04-65 BC82-056 BC89-365 BC82-770 BC84-183 BC84-151 BC84-617 BC87-038 BC91-587 BC85-023 BC85-036 BC85-328 BC85-553 BC86-429 BC86-514A BC87-490A BC89-103 BC90-335 BC94-662 BC03-1770 BC85-134 BC93-490 BC93-518 BC95-220 BC86-458 464 215 26 78 81 96 155 279 103 113 115 127 146 152 175 197 226 344 464 116 313 314 351 152 BC88-401 BC97-028 BC84-219 BC84-224 BC85-304 BC85-307 BC85-483 BC86-400 BC88-166A BC88-405 BC88-476 BC95-002 BC90-319 187 376 100 83 114 117 123 146 182 188 194 344 234 264 316 316 359 359 360 360 376 IX-01-02 IX-98-02 IX-01-40 IX-92-86 BC91-156 BC93-584 BC92-306 BC95-252 BC95-303 BC95-482 BC95-302 BC93-431, BC95-222 BC00-553 BC97-309 BC03-740 BC93-158 419 383 453 318 IX-04-02 IX-89-36 IX-89-58 BC03-1029 BC89-357 BC90-249 457 212 221 Welding Procedure Specification base metal thickness IX-04-09 certification IX-83-03 IX-89-43 changes in IX-83-37 IX-83-118 IX-83-125 IX-83-150 IX-86-67 IX-92-30 combination of processes IX-83-164 IX-86-01 IX-86-06 IX-86-23 IX-86-56 IX-86-60 IX-86-87 IX-89-26 IX-89-67 IX-95-10 IX-04-08 combining of IX-86-08 IX-92-75 IX-92-77 electrical characteristics IX-95-18 for corrosion-resistant weld IX-86-59 metal overlay IX-89-12 IX-95-41 for weld repair / buildup IX-83-160 information recorded on IX-83-127 IX-86-04 IX-86-10 IX-86-14 IX-86-54 IX-89-03 IX-89-16 IX-89-19 IX-95-11 manufacturer’s and contractor’s IX-89-73 responsibility IX-92-07 IX-92-80 IX-92-81 IX-95-25 IX-95-26 IX-95-27 IX-95-29 IX-95-40 meeting requirements of older editions multiple layers P-Number Welder Qualification (see Performance Qualification Testing) Welding Operator Qualification (see Performance Qualification Testing) (p) ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS File No Interpretation Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT SECTION IX — CUMULATIVE INDEX — INTERPRETATIONS VOLS 12–57 Interpretation Welding Procedure Specification (Cont’d) qualification IX-89-04 IX-89-35 IX-89-66 IX-95-01 requalification of IX-89-14 IX-89-42 IX-89-17 IX-89-41 IX-89-54 IX-92-38 IX-95-04 IX-95-16 IX-04-20 short circuiting mode IX-95-28 File No BC88-167 BC89-307 BC90-281 BC94-104 BC88-403 BC89-364 BC88-473 BC89-363 BC89-367 BC91-630 BC94-296 BC95-095 BC05-293 BC96-002 Page No Subject 182 211 226 333 187 215 193 214 220 283 335 346 472 360 Welding Procedure Specification (Cont’d) short circuiting mode (Cont’d) IX-95-33 supplied to welder IX-83-17 support of IX-83-146 IX-86-42 IX-86-55 IX-89-26 IX-89-68 units of measurement IX-04-27 use for an unassigned material IX-89-41 IX-01-07 use of at job sites IX-83-12 use of by subcontractor IX-86-49 weld joint IX-89-53 IX-95-01 (q) Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT Interpretation File No BC96-001 BC82-422 BC84-619 BC86-331 BC86-426 BC89-103 BC90-349 BC05-1215 BC89-363 BC01-029 BC82-341 BC86-367 BC90-045 BC94-104 Page No 367 13 90 141 146 197 227 477 214 427 11 144 219 333 ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Subject ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT ```,,,,,,``,`,``,,`````,`,`,``-`-`,,`,,`,`,,` - Copyright ASME International Provided by IHS under license with ASME No reproduction or networking permitted without license from IHS Licensee=Chevron Corp/5912388100 Not for Resale, 08/28/2008 13:39:12 MDT