Làm chủ autodesk revit MEP 2016

Mastering Autodesk® Revit® MEP 2016 Mastering Autodesk® Revit® MEP 2016 Simon Whitbread A AUTODESK Q SYBEX Official Press A Wiley Brand Senior Acquisitions Editor: Stephanie McComb Development Editor: Susan Herman Technical Editor: Steve Stafford Production Editor: Dassi Zeidel Copy Editor: Liz Welch Editorial Manager: Mary Beth Wakefield Production Manager: Kathleen Wisor Associate Publisher: Jim Minatel Book Designers: Maureen Forys, Happenstance Type-O-Rama; Judy Fung Proofreader: Amy Schneider Indexer: Ted Laux Project Coordinator, Cover: Brent Savage Cover Designer: Wiley Cover Image: © winnieapple/iStockphoto Copyright © 2015 by John Wiley & Sons, Inc., Indianapolis, Indiana Published simultaneously in Canada ISBN: 978-1-119-05937-0 ISBN: 978-1-119-05936-3 (ebk.) ISBN: 978-1-119-05938-7 (ebk.) No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, scanning or otherwise, except as permitted under Sections 107 or 108 of the 1976 United States Copyright Act, without either the prior written permission of the Publisher, or authorization through payment of the appropriate per-copy fee to the Copyright Clearance Center, 222 Rosewood Drive, Danvers, MA 01923, (978) 750-8400, fax (978) 646-8600 Requests to the Publisher for permission should be addressed to the Permissions Department, John Wiley & Sons, Inc., in River Street, Hoboken, NJ 07030, (201) 748-6011, fax (201) 748-6008, or online at http://www.wiley.coni/go/permissions Limit of Liability/Disclaimer of Warranty: The publisher and the author make no representations or warranties with respect to the accuracy or completeness of the contents of this work and specifically disclaim all warranties, including without limitation warranties of fitness for a particular purpose No warranty may be created or extended by sales or promotional materials The advice and strategies contained herein may not be suitable tor every situation This work is sold with the understanding that the publisher is not engaged in rendering legal, accounting or other professional services If professional assistance is required, the services of a competent professional person should be sought Neither the publisher nor the author shall be liable for damages arising herefrom The fact that an organization or Web site is referred to in this work as a citation and/or a potential source of further information does not mean that the author or the publisher endorses the information the organization or Web site may provide or recommendations it may make Further, readers should be aware that Internet Web sites listed in this work may have changed or disappeared between when this work was written and when it is read For general information on our other products and services or to obtain technical support, please contact our Customer Care Department within the U.S at (877) 762-2974, outside the U.S at (317) 572-3993 or fax (317) 572-4002 Wiley publishes in a variety of print and electronic formats and by print-on-demand Some material included with standard print versions of this book may not be included in e-books or in print-on-demand If this book refers to media such as a CD or DVD that is not included in the version you purchased, you may download this material at http://booksupport.wiley.com For more information about Wiley products, visit www.wiley.com Library of Congress Control Number: 2015945504 TRADEMARKS: Wiley, the Wiley logo, and the Sybex logo are trademarks or registered trademarks of John Wiley & Sons, Inc and/or its affiliates, in the United States and other countries, and may not be used without written permission Autodesk and Revit are registered trademarks of Autodesk, Inc All other trademarks are the property of their respective owners John Wiley & Sons, Inc is not associated with any product or vendor mentioned in this book 10 To my wife and daughter for all their support, all the time, thank you Acknowledgments Firstly I'm going to thank my wife Carole and daughter Jess: Thank you both for your continued support over the past year while I have been working on this and other projects; it doesn't come anywhere near the thanks due for all your hard work and patience during the time I have been either working away from home or writing late into the night The support from you both over the years has helped me achieve so much—what else can I say but thank you and I love you This edition of the book is quite special for me I've gotten to edit and write the entire confection! But that doesn't mean I'm now a team of one, as this is still a collaborative enterprise So thank you also to everyone at Sybex who helped to get this edition moving It seems unfair to single out any one person; suffice it to say that without you, there would be no book A special thanks to Steve Stafford, who has managed to keep me and the book on the straight and narrow And finally, a real big thank-you to Don Bokmiller Again Well, you didn't come back for more this year, but without your hard work in previous editions, I don't think I would be here, writing this © I'd also like to thank Autodesk—not just because I am now a part of their great team, but also for inspiring me to push myself There is so much cool and amazing stuff coming out of the company that I am proud to finally be a part of such a great organization that influences so many people around the world The world of technology is moving forward at such a terrific rate I am amazed almost daily by the great work and products the company is producing About the Author Simon Whitbread, Enterprise Priority Revit Specialist at Autodesk, started using Revit at release 5.1 He has over 30 years of experience in the building services and architectural industries Since the early 1990s, he has been involved in developing and managing CAD and IT systems He moved to New Zealand in 2002, where he led the implementation of Revit Architecture at Jasmax, one of New Zealand's leading architectural practices More recently he has been providing implementation, support, and training services for AutoCAD and the Revit suite of programs to companies in Australia, Dubai, Indonesia, New Zealand, Singapore, and the United States Now living in the United Kingdom, Simon enjoys spending time with his family, is a frequent speaker at Autodesk University and Revit Technology Conference (RTC) events, is a member of AUGI, and sometimes finds the odd moment for Twitter and Facebook Contents at a Glance | CONTENTS AT A GLANCE Contents 10 | CONTENTS CONTENTS | 10 CALCULATED SETTING • COLOR PRESET SETTINGS 813 Reconcile Hosting palette, 99-100, 99 rectangular ductS, 256, 275, 281, 281 reference levels for lighting fixtures, 561 reference lines equipment connectors, 526 pinning, 591 solid modeling, 469-477, 469-477 Reference Other View option, 631 reference planes devices, 590-594, 592-595 equipment connectors, 524-526 lighting fixtures, 337 solid modeling, 469-477, 469-477 reflected ceiling lighting plans, 336-337 Reflected Ceiling Plan (RCP) views, 482 regions filled annotations, 501-502,501-502 detail components, 501,501,629 overview, 610-613, 611-613 symbols, 495,495 visibility, 149, 502-506, 503-506 Reject option for coordination, 98 relationships, child and parent, 271-272 Relinquish All Mine option, 52-53, 56 Reload Configuration option, 664, 665 Reload From option, 86 Reload Latest option, 57 Relocate Project tool, 83 Remove From Circuit option, 407 Remove Spare/Space option, 415 removing devices from circuits, 407, 407 panels, 13 renaming levels, 123,124 pipe fittings, 315 pipe types, 311 renderings for site lighting, 352-353, 352354 Renewable Energy Potential information, 243 Repeat tool, 30 repeating detail, 615-616, 615-616 Replace Halftone With Thin Lines option, 92 Replace With Text option, 622 reporting parameters, 142 reports for heating and cooling loads, 234-238, 234-237 Required Lighting Level parameter, 202 Restore Backup button, 80 Return Air connectors, 544-545 Return Air system, 260 Reveal Constraints button, 20, 20 revision clouds, 654-655, 656 revisions schedules, 639-640, 640 sheets, 654-656, 654 - 655 Revit Server, 71-73, 72-74 Revit Server Administrator, 72, 72-73 revolves, 460-462, 461- 462 RFA files, 553, 554 ribbon, 3-4 customizing, 13-14, 13-14 tabs, 4-10, 4-10 contextual, 10-13, 11-13 family editor, 11-13, 12-13 Right option for reference planes, 472 Rise/Drop graphics, 381, 382 Rise/Drop Symbol setting for duct systems, 257 risers, fire assemblies, 444-446, 445 diagrams, 377-378, 377-379 roofs, 487 Rotate Part option, 674 Rotate With Component parameter, 513 rotating annotations, 597 detail, 616 fabrication parts, 674, 675 guide grids, 647, 647 outlets, 358,358 tags, 513 Roughness setting for duct systems, 256 Round Connector Diameter parameter, 527 Round Connector Dimension option, 520 round ducts, 256,275, 281,281 Round function, 171 Rounddown function, 171 rounding, 170-171 Rounding setting, 383 Roundup function, 171 routing ducts automatic, 285-290, 286-290 manual, 291-293, 291-292 tools, 300-304, 300-304 pipes, 316 automatic, 316-318, 317-318 fire protection, 452 manual, 318-326, 319-326 Routing Preferences dialog box 256 systems, 268, 269,pipe system 312-313, families, 312-313 718, 718 rows in schedules, 650 RTS (Radiant Time Series) method, 226-227, 227 rules for view filters, 37 Run Energy Simulation dialog box, 243, 243 RVT Link Display Settings dialog box, 87-88 S Sanitary pipe system, 267 Save As dialog box for central files, 51, 52 Save File As Central Model dialog box, | CALCULATED SETTING • COLOR PRESET SETTINGS 814 51, 51 Save Locally option, 58 Save Positions option, 86 Save To New File option, 623 saving central files, 51, 51 drafting views as files, 623 Schedule Building Components option, 198 Schedule Properties dialog box, 164166,164,166 Appearance tab, 186,186 editing with, 186-187 Fields tab, 176-178,176, 197, 197, 201, 202, 339, 340 Filter tab, 179-181,180 Formatting tab, 182-185,183-185 Sorting/Grouping tab, 181-182, 181188, 185 Schedule Settings dialog box, 220, 221 schedules, 173 circuits, 416-418, 417-418 defining, 173-176,174-175 for design and analysis, 200 Duct, 194,194, 203,203 editing, 186-190,187-189 exporting, 195 grouping, 187 keys creating, 339-341,339-341 overview, 201-203, 201-203 lighting analysis, 338, 338 Lighting Fixture, 181-182, 181-188, 192-193, 193, 197, 197-198 Mechanical Equipment, 191-192, 192 Model Component, 198-199, 199 Note Block, 210-211, 210-211 panel, 204-206, 206, 399, 416-418, 417-418 parameters, 164-167, 164, 166, 177 Pipes, 194-196, 195 plumbing fixtures, 425-427, 427 settings See Schedule Properties dialog box Sheet List, 207-208, 208-209 sheets, 649650, 650 Space, 196-197, 197-198, 202 space properties, 218-219, 218 system families, 194-197, 194-195,197-198 template views, 690-692, 690 - 692 titleblocks, 639-640 View List, 209-210, 210 views, 173 sconces, 584 secondary connectors, 537, 538 Secondary Distribution System parameter, 367, 367 sections 2D data for, 119-128, 121-128 callouts, 631-632, 632 personal, 292-293 templates for, 713 Select All Instances option, 31, 31, 86, 141-142 Select Symbol dialog box, 381 selection filters, 37, 37 selection set settings, 31, 31 Send To Back button, 612 server racks, 373 Service Type settings, 222 Set Template Options dialog box, 206,206 shapes duct connectors, 531 duct systems, 261 moving and editing, 492 revolves, 460-461, 461-462 shared coordinates, 83-85, 83-84 Shared Levels And Grids workset, 80 shared models, 92 change alerts, 98-99, 98-99 monitoring, 92-97, 94-97 project coordination, 100 reconciling hosting, 99-100, 99 shared parameters, 137-138,156161,157-159, 166, 639, 639 Shared Parameters dialog box, 166167 sharing files See collaboration Sheet Composition panel, 644 Sheet Issues/Revisions dialog box, 654-655, 655 Sheet List schedules, 207-208, 208-209 sheets, 635 annotations, 649 exporting, 659-661, 660-661 parameters, 167-169, 168 printing, 657-659, 657- 659 Project Browser, 642-644, 642644 revisions, 654-656, 654655 schedules, 649-650, 650 sheet lists, 650-654, 651-654 standards, 723-724 titleblocks, 635-640, 636-640 viewports, 647- 648, 648- 649 views on, 644-647, 644-647 working with, 641-642, 641 short lines, 619 shortcuts fabrication, 666 keyboard, 27-29, 28-29 Show Analytic Model option, 19 Show Border parameter, 704 Show Disconnects Options dialog box, 295, 296 Show Edges option, 22 Show Help Tooltip option, 674 Show In Parameter option, 629 | CALCULATED SETTING • COLOR PRESET SETTINGS 815 Show Mass mode, 240, 484, 484 Show option for worksets, 66 Show Related Warnings symbol, 233 Show Rendering Dialog option, 352 Show Title parameter, 648 SHX fonts, 117 Simple level, 246 Simple With Shading Surfaces level, 246 simplicity in energy analyses, 242 simUlation, energy, 242-244,243-244 sin operator, 169 single lines for ducts, 275 Site Settings dialog box, 7, sites, lighting, 348 analysis, 350-353, 351-354 layout, 350, 351 site plans, 348-349 size cable trays, 382-383, 382-383 circuit breakers, 413-414 duct connectors, 531 ducts, 297-301, 299-301 equipment, 550 fabrication parts, 675, 675 schedules, 650 titleblocks, 636 wiring, 392-393 sizing tables for pipes, 315 SketchUp, 134 skid mounted ACs/AHUs, 279, 279 slashes (/) in formulas, 169 Sliver Space Tolerance parameter, 231 sliver spaces, 231 sloped ceilings, light fixtures in, 343-344, 344 sloped pipes, 435-437, 436-437 slopes tables, 308 Smart Snapping option, 674 snapping fabrication parts, 674 solid geometry for devices, 590 solid modeling, 455-456 blends, 458-460, 459-460 constraints and dimensions, 478-481, 478-481 extrusions, 456-458, 457 in-place massing, 484-489, 484 - 489 joining geometry, 466 reference planes and lines, 469-477, 469-477 revolves, 460-462, 461-462 sweeps, 462-464, 462- 464 swept blends, 464-466, 465 - 466 visibility controls, 481-484, 482- 483 voids, 467-469, 467-468 Solids tab in exporting, 702 sorting schedules, 181-182, 181, 185, 426, 427 views in groups, 727, 728 sources, light, 573-577,574-577 Space Naming Utility, 219 Space Properties schedule, 218-219, 218 Space schedules, 691, 691 Space Style parameter, 202 Space Summary area in Heating And Cooling Loads report, 234 Space Type field, 218 Space Type Settings dialog box, 203, 203, 220, 236 spaces creating, 216, 216-217 formulas, 178,179 lighting, 333-336, 334-335, 569, 570 modeling, 215-216 placing, 217-218,217 properties modifying, 219-221,219-221 schedules, 218-219,218 schedules, 196-197,197-198, 202 zones, 221-223 spacing guide grids, 644-645, 644 layout, 616 Specify option for worksets, 67 Specify Type Mapping option, 96 Specify Types dialog boX, 152, 152 spherical shapes for revolves, 460, 461-462 Spline option, 494 spline-style wires, 409-410 split ducts, 304, 304 Split tool, 304 splitting schedules, 650, 650 Spot Elevation tag, 437, 438 sprinklers, 270 heads, 446-447, 446 448-449 sqrt operator, 169 stairs, 337 standard details, 117-119, 118-119 Standard option for panels, 413 standards, company vs project, 713 Start Angle parameter, 462 Start-End-Radius Arc option, 493 Start Offset parameter, 437 Static Regain duct sizing method, 298 status bar, 23, 23, 468 SteeringWheels settings, 30 Strong Reference option, 471 Structure tab, 4, styles annotation, 702-707, 703-706 lines, 491, 492-493, 610, 610 subcategories, 497-498, 498 | CALCULATED SETTING • COLOR PRESET SETTINGS 816 template lines, 697-698, 698 titleblocks, 637 Sub-Discipline parameter, 167, 726-727, 727 subcategories naming conventions, 131 symbols, 497-499, 498-499 Subscription Center, 23 subtraction operator, 169 Summer Dry Bulb temperature in Heating And Cooling Loads report, 234 sun path, 22, 351, 351 Sun Settings option, 22 Supply Air connectors, 543-544 Supply Air system, 260 SupplyHeight parameter, 522 SupplyWidth parameter, 522 Surface Connection tab, 385 surface connectors, 534-535, 534-535 survey points, 84-85, 84 sweeps, 462-464, 462-464 swept blends, 464-466, 465-466 switchboards, 367-368, 368 switches devices, 589 disconnect, 364-365, 365-366 lights, 346-348, 346-348, 505-506, 505-506 Symbol Offset parameter, 507-508 Symbol Offset From Wall parameter, 509 symbolic lines devices, 594, 594-595 lighting fixtures, 344, 583, 583 symbols, 491 See also annotations devices, 596 filled regions, 495, 495 fire alarm diagrams, 378, 379 interference, 360-362, 360-362 libraries, 496 detail components, 500-502, 501502 generic annotations, 496-497, 496 subcategories, 497-499, 498499 text and labels, 499-500, 500 power diagrams, 375 tags, 509-513, 510-513 visibility, 502-506, 503-506 wall lights, 584 Synchronize And Modify Settings option, 52, 56 Synchronize Now option, 56 Synchronize With Central dialog box, 58, 58 Synchronize With Central option, 52 synchronizing local files, 55-58, 56-59 System Abbreviation parameter, 36-37 System Browser, 251-253, 252-253 System Classification parameter, 257, 260 system classifications, 309 system equipment, 518 system families preloaded, 717-720, 718-719 schedules, 194-197,194195,197-198 system graphic overrides, 310 System Inspector, 245, 301, 301 system parameters, 137, 154-155 System setting duct connector flow, 531 duct systems, 260 System tab, 664 System Type parameter, 400 systems classification, 250, 250 logical See logical systems systems devices annotation symbols, 357, 357 circuits, 362-363, 363 face-hosted families, 358-361, 358-361 interference between symbols, 360 -362, 360-362 modeling methods, 355-357, 356-357 Systems tab on ribbon, 4, T Tab key for circuits, 373, 374 Tab Switching Behavior settings, 2627 tables lookup, 155-156, 156 pipe fluids, 315, 316 pipe sizing, 315 tabs contextual, 10-13, 11-13 ribbon, 4-10, 4-10 visibility, 14, 14 Tag On Placement option, 384 tags comment, 111-112, 111 leaders, 512-513, 513, 602 line patterns, 696 templates for, 714 working with, 509-513, 510513 tan operator, 169 Tangent-End Arc button, 494 Tappipe fittings, 327, 438 target lighting levels, 338-341 Target Percentage Glazing setting, 241 Target Sill Height setting, 241 Tee pipe fittings, 327, 438 telephone circuits, 416, 416 telephone device systems, 372-373 temperature and humidity in heating and cooling loads, 229 templates, 35, 681 annotation styles, 702-707, | CALCULATED SETTING • COLOR PRESET SETTINGS 817 703-706 categories, 588-589 drafting line settings, 693-698, 694, 696-698 electrical settings, 400 export settings, 698-702, 699-702 guidelines, 729 linked files for, 91 Object Styles settings, 692-693, 693 overview, 682 pipe routing, 319 preloaded content, 712-723, 715-719, 721-723 Project Browser organization, 725-728, 725-728 project phases, 709-712, 709-712 sheet standards, 723-724 titleblocks, 636, 636 unit settings, 707-708, 708 views, 41-42, 41-42 display settings, 684-690, 686-689 number and types, 682-684 schedules, 173, 690-692, 690-692 Temporary View Properties setting, 19, 19 Terminals subfolder, 356 text CAD files, 104 copying, 504 labels, 512 line patterns, 696 schedules, 186 styles, 702-704, 703-704 symbols, 499-500, 500 titleblocks, 637-640, 637-640 Text & Fonts tab, 701, 701 thickness, lines, 694-695, 694 labels, 512 text, 704 third-party applications, 204 3D data, 115, 129 ADSK file format, 132 AutoCAD DWG files, 133 families, 131 file formats, 132-134, 134 project files, 129, 129 project phasing, 130-131, 130 SketchUp, 134 3D views defaults, 475 reference planes, 475 thumbnail links, 67 Tick Mark parameter, 707 tick marks arrowhead, 707 wiring, 392, 412 Tick Marks parameter, 412 Title parameter, 648 Title On Sheet parameter, 648 titleblocks, 635-636 available, 641 CAD graphics for, 636 logos and images, 640-641 sheet standards, 723-724 text and labels, 637-640, 637-640 titles templates for, 713 in viewports, 647-648, 649 Toggle Connector option, 674 Tooltip Assistance menu, 27, 27 tooltips, 27, 27, 674 Top setting, 471472 Top to LeVel Above setting, 686-687 total sheet count, 168 Total Width setting, 206 Transfer Project Standards feature, 702, 706 load calculations, 396 template defaults, 205 Transfer Project Standards tool, 42 transformers, distribution, 366-367, 366-367 transition settings in fabrication, 669, 670 Transitions pipe fittings, 327, 438 TrueType fonts, 117 | CALCULATED SETTING • COLOR PRESET SETTINGS 818 6, 116 , 116-117 tion 2D DGN, 116 tions and elevations, 119-128, ard details, 117-119, 118-119 , inserting, 625-626, 625-626 arameters, 157 alogs, 149-151 s ers, 149-152, 150-152 g fixtures, 425, 426 es, 550-551 nts setting tems, 257 s, 192 setting, 257 g g”432, 433 96, 96 arameter, 155 meter options, 142-145 ters, 140-141 es dialog box o, 5, ys, 380, 380 arameters, 155 615, 615 g, 17 tems, 257,258 ions, 613, 613 es 711, 711 97 apping, 130,130 stems, 251,251, 268,268, 27071"312, 312 g fixtures, 425, 426 g piping, 437, 438 rowser organization, 725 arameters, 160 ts, 653, 653 amilies, 718-720, 719 es, 702-703, 703 s, 647-648, 648 12 r list, 356 meter, 142-146, 143-146 393 unclipped survey points, 85 Underlay setting, 685 Underlay Orientation setting, 685 Undo function, 65 Unions pipe fittings, 327, 438 unclipped base points, 85707 Unit Format parameter, Unit Height parameter, 522 Unit Width parameter, 522 units conduits, 383 imported objects, 119 templates, 708, 708 Units & Coordinates tab, 702 Unjoin Geometry option, 466 updating consultant files, 85 upright sprinkler heads, 446 URL setting duct systems, 257 schedules, 193, Usage parameter, 210-211 Use Building Element Mode tool, 241 Use Daylight Savings Time option, 230 Use Global Setting option, 66 Used By Sizing column for wiring, 393, Used In Size Lists, 270 Used In Sizing option, 270 User-Created worksets, 61, 66 user interface, context menus, 30-32, controlling, 24-25, Exchange Apps, 24, 30, 30 Info Center, keyboard shortcuts, menus, 25-27, 25-27 Options Bar, 16,16 Properties palette, Quick Access toolbar, ribbon See ribbon status bar, 23, 23 View Control Bar, 18-23 User Interface option, 24-25, User Interface tab, 26, shortcuts, 27 ribbon tabs, 14 Utility parameter duct connectors, 532 duct systems, 261 | V Values Are Aligned Per Group Type 163 Values Can Vary By Group Instanc 163 valves VARIABLE AIR VOLUME •WIRE TYPE VIEW FILTERS 819 fire protection, 445 plumbing, 438, 439 types, 327-328 variable air volume (VAV) boxes disconnects, 365, 366 mounting, 280, 280 vector processing, 658 Velocity duct sizing method, 298 Vent pipe system, 267 vertical products, 116 vertical surfaces, 358, 358 verticals from DWGs, 133-134 vertices for extrusions, 459, 460 View Control Bar, 18-23, 18-22 View Depth setting, 686-687 View List or Sheet List Properties dialog box, 174 View List schedules, 209-210, 210 view lists, templates, 690, 690 View Range settings plumbing piping, 435, 435 site plans, 349 templates, 686-688, 687-688 View Scale setting, 684 View/Sheet Set dialog box, 659, 659 View Specific Display options, 482 View tab family editor environment, 12,12 ribbon, 8, view templates, 41-42, 41-42,187 ViewCube settings, 30 viewports in sheets, 647-648, 648-649 views detail, 628-632, 629-632 drafting See drafts and drafting views filters, 35 creating, 35-39,36-39 wire types, 39-40,40 inserting, 626-627, 627 parameters, 167-169, 168 plumbing, 423-425, 424 properties, 682 schedules, 173 on sheets, 644-647, 644-647 templates display settings, 684-690, 686-689 number and types, 682-684 schedule, 690-692, 690-692 working and documentation, 683 visibility and Visibility/Graphic Overrides dialog box, 41-42, 41-42 annotations, 502-506, 503-506 CAD files, 104 devices, 592-593, 592 fire alarm systems, 377-378 fire protection systems, 442 guide grids, 647 levels, 126, 126 lines and regions, 149 linked CAD files, 104 links, 87-92, 88-92 outlets, 360-361 parameters, 148 plumbing, 425 revision clouds, 657 schedules, 179 shared coordinates, 83-84 solid modeling, 481-484, 482-483 tabs, 14, 14 template views, 686-690, 687-689 view filters, 35, 37-38, 37 views, 126-127, 127 worksets, 65-69, 65-69 Visible In All Views setting, 50, 66 Visual Style setting, 684-685 voids, 455-456, 467469, 467-468 Voltage parameter, 167 voltages electrical connectors, 536 electrical settings, 394, 395 lighting fixtures, 569, 579 and panels, 369 volume in space lighting, 335 w wall light symbols, 584 wall-mounted lights, 345-346, 346, 567568, 567-568 walls, curtain, 488-489 warnings, circuit, 405, 406 Weak Reference option, 471 weather data, 229-230, 230 weight, lines labels, 512 overview, 694 - 695, 694 text, 704 Wet Bulb temperature, 234 wet fire protection systems, 447, 450, 450451 width cable trays, 387 duct connectors, 532 duct systems, 261 equipment, 550 Windows Explorer, 55 Winter Dry Bulb temperature, 234 wire type view filters, 39-40, 40 | 782 | WIRING • ZONES IN BUILDING LOAD ANALYSIS wiring devices and fixtures creating, 400-403, 400-403 displaying, 411 drawing, 409-411, 410-411 editing, 403-405, 404-405 properties, 412 settings, 392-394, 392-393 Work Plane-Based option, 520, 520 work planes connectors, 526, 528, 528, 535, 542 labels, 603 lighting fixtures, 563-565, 563, 578, 579 reference planes, 469, 470 working views, 65, 683-684 worksets, 45 active, 48 creating, 50-53,51-52 lighting, 338 model elements, 61-64, 62-64 names, 76 overview, 59, 60 ownership, 59-61 settings, 47-49, 49-50 visibility, 65-69, 65-69 worksharing, 45 See also collaboration central files, 45-53 color, 21 communication, 69-71, 69-71 enabling, 48 local files creating, 46, 53-55, 54-55 synchronizing, 55-58, 56-59 Revit Server, 71-73, 72-74 Worksharing dialog box, 47-48, 47 Worksharing Display Settings dialog box, 21, 21 worst-case loads, 228 Wrap Between Parameters Only option, 511 Wye pipe fittings, 327, 438 X XML files, 224-225,225 xrefs See links and linked files Y Yes/No parameters, 148-149,149 z Zone Summary area in Heating And Cooling Loads report, 234 zones in building load analysis, 221223 ... itself In 2012, Autodesk introduced the Autodesk? ? Revit? ? program, which combined all the features of the Autodesk? ? Revit? ? Architecture, Autodesk? ? Revit? ? Structure, and Autodesk? ? Revit? ? MEP platforms...Mastering Autodesk? ? Revit? ? MEP 2016 Mastering Autodesk? ? Revit? ? MEP 2016 Simon Whitbread A AUTODESK Q SYBEX Official Press A Wiley Brand Senior Acquisitions... part of the Autodesk? ? Fabrication products CADmep™, ESTmep™, and CAMduct™ Revit Extension for Autodesk Fabrication You can import and export fabrication jobs between Revit and the Autodesk Fabrication