| Tài liệu tham khảo |
Loại |
Chi tiết |
| [1] Mohamed, O. A., Masood, S. H. and Bhowmik, J. L. (2015), "Optimization of fused deposition modeling process parameters: a review of current research and future prospects", Advances in Manufacturing, Vol. 3 No. 1, pp. 42-53 |
Sách, tạp chí |
| Tiêu đề: |
Optimization of fused deposition modeling process parameters: a review of current research and future prospects |
| Tác giả: |
Mohamed, O. A., Masood, S. H. and Bhowmik, J. L |
| Năm: |
2015 |
|
| [2] Trieu Khoa Nguyen, Bong-Kee Lee, (2018) "Post-processing of FDM parts to improve surface and thermal properties", Rapid Prototyping Journal, Vol. 24 (7), pp.1091-1100 |
Sách, tạp chí |
| Tiêu đề: |
Post-processing of FDM parts to improve surface and thermal properties |
|
| [3] Peng, A., Xiao, X. and Yue, R. (2014), "Process parameter optimization for fused deposition modeling using response surface methodology combined with fuzzy inference system", The International Journal of Advanced Manufacturing Technology, Vol. 73 No. 1, pp. 87-100 |
Sách, tạp chí |
| Tiêu đề: |
Process parameter optimization for fused deposition modeling using response surface methodology combined with fuzzy inference system |
| Tác giả: |
Peng, A., Xiao, X. and Yue, R |
| Năm: |
2014 |
|
| [4] Turner, B. N. and Gold, S. A. (2015), "A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness", Rapid Prototyping Journal, Vol. 21 No. 3, pp. 250-261 |
Sách, tạp chí |
| Tiêu đề: |
A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness |
| Tác giả: |
Turner, B. N. and Gold, S. A |
| Năm: |
2015 |
|
| [5] Boschetto, A., Giordano, V. and Veniali, F. (2013), "3D roughness profile model in fused deposition modelling", Rapid Prototyping Journal, Vol. 19 No. 4, pp. 240-252 |
Sách, tạp chí |
| Tiêu đề: |
3D roughness profile model in fused deposition modelling |
| Tác giả: |
Boschetto, A., Giordano, V. and Veniali, F |
| Năm: |
2013 |
|
| [6] Galantucci, L. M., Lavecchia, F. and Percoco, G. (2009), "Experimental study aiming to enhance the surface finish of fused deposition modeled parts", Cirp Annals- Manufacturing Technology, Vol. 58 No. 1, pp. 189-192 |
Sách, tạp chí |
| Tiêu đề: |
Experimental study aiming to enhance the surface finish of fused deposition modeled parts |
| Tác giả: |
Galantucci, L. M., Lavecchia, F. and Percoco, G |
| Năm: |
2009 |
|
| [7] McCullough, E. J. and Yadavalli, V. K. (2013), "Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices", Journal of Materials Processing Technology, Vol. 213 No. 6, pp. 947-954 |
Sách, tạp chí |
| Tiêu đề: |
Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices |
| Tác giả: |
McCullough, E. J. and Yadavalli, V. K |
| Năm: |
2013 |
|
| [8] Garg, A., Bhattacharya, A. and Batish, A. (2016), "On surface finish and dimensional accuracy of FDM parts after cold vapor treatment", Materials and Manufacturing Processes, Vol. 31 No. 4, pp. 522-529 |
Sách, tạp chí |
| Tiêu đề: |
On surface finish and dimensional accuracy of FDM parts after cold vapor treatment |
| Tác giả: |
Garg, A., Bhattacharya, A. and Batish, A |
| Năm: |
2016 |
|
| [9] Kuo, C.-C. and Mao, R.-C. (2016), "Development of a precision surface polishing system for parts fabricated by fused deposition modeling", Materials and Manufacturing Processes, Vol. 31 No. 8, pp. 1113-1118 |
Sách, tạp chí |
| Tiêu đề: |
Development of a precision surface polishing system for parts fabricated by fused deposition modeling |
| Tác giả: |
Kuo, C.-C. and Mao, R.-C |
| Năm: |
2016 |
|
| [10] Jo, K.-H., Jeong, Y.-S., Lee, J.-H. and Lee, S.-H. (2016), "A study of post- processing methods for improving the tightness of a part fabricated by fused deposition modeling", International Journal of Precision Engineering and Manufacturing, Vol. 17 No. 11, pp. 1541-1546 |
Sách, tạp chí |
| Tiêu đề: |
A study of post-processing methods for improving the tightness of a part fabricated by fused deposition modeling |
| Tác giả: |
Jo, K.-H., Jeong, Y.-S., Lee, J.-H. and Lee, S.-H |
| Năm: |
2016 |
|
| [11] Singh, J., Singh, R. and Singh, H. (2017), "Investigations for improving the surface finish of FDM based ABS replicas by chemical vapor smoothing process: a case study", Assembly Automation, Vol. 37 No. 1, pp. 13-21 |
Sách, tạp chí |
| Tiêu đề: |
Investigations for improving the surface finish of FDM based ABS replicas by chemical vapor smoothing process: a case study |
| Tác giả: |
Singh, J., Singh, R. and Singh, H |
| Năm: |
2017 |
|
| [12] Jin, Y., Wan, Y., Zhang, B. and Liu, Z. (2017), "Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties", Journal of Materials Processing Technology, Vol. 240, pp. 233-239 |
Sách, tạp chí |
| Tiêu đề: |
Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties |
| Tác giả: |
Jin, Y., Wan, Y., Zhang, B. and Liu, Z |
| Năm: |
2017 |
|
| [13] Kuo, C. C. and Su, S. J. (2013), "A simple method for improving surface quality of rapid prototype", Indian Journal of Engineering and Materials Sciences, Vol. 20 No. 6, pp. 465-470 |
Sách, tạp chí |
| Tiêu đề: |
A simple method for improving surface quality of rapid prototype |
| Tác giả: |
Kuo, C. C. and Su, S. J |
| Năm: |
2013 |
|