1. Trang chủ
  2. » Y Tế - Sức Khỏe

Science Of Dental Materials Clinical Applications V Shama Bhat

1.2K 117 0

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Cấu trúc

  • Half Title Page

  • Title Page

  • Copyright

  • Foreword by BH Sripathi Rao

  • Foreword by KS Bhat

  • Preface to Second Edition

  • Colour Plates 1–16

  • Colour Plates 17–32

  • About the Book

  • About the Author

  • Contents

  • 1. Orientation to Dentistry

    • History of Dentistry

    • Pre-Historic Period

    • Medieval Period

    • Progress of Dentistry Since 1840–1900

    • Developments Since 20th Century

    • Orientation to Dentistry

    • Materials used in Dentistry

    • Special Approaches

    • Orientations to Dentistry (Scope for Study)

    • Oral Environments

    • Structure of Tooth

    • Properties of Tooth

    • Conservative Dentistry

    • Need of Conservative Procedures

    • Stages of Tooth Decay and Principles of Restorations

    • Classification of Tooth Cavities

    • Specialities in Dental Sciences

    • Importance of Numerical Values of Compositions, Properties

    • ADA Specifications

    • ADA Acceptance Programme

    • International Standards

    • Importance of Learning Laboratory

  • 2. General Properties of Matter

    • States of Matter

    • Materials used in Dentistry

    • General Properties

    • Interatomic Bonding

    • Crystal Structure

    • Amorphous (Non-crystalline) Structures

    • Mechanical Properties (Deformations)

    • Stress and Strains

    • Stress-Strain Relations

    • Elastic Deformations

    • Non-elastic Deformation

    • Determination of Mechanical Properties

    • Strengths of Materials

    • Dynamic Forces

    • Impact Strength

    • Fatigue

    • Surface Hardness

    • Methods of Measurements of Surface Hardness

    • Outlines of Testing Methods

    • Surface Phenomena of Liquids

    • Cohesion (Surface Tension)

    • Adhesion (Wetting)

    • Surface Energy

    • Angle of Contact and Wetting

    • Adhesion

    • Rheological Properties—Viscosity

    • Viscosity

    • Viscoelasticity (Creep)

    • Theoretical Explanation Viscoelastic Deformation (Option)

    • Thermal Properties

    • Heat of Fusion (Latent Heat)

    • Thermal Conduction

    • Thermal Diffusivity

    • Thermal Expansion

    • Colour Parameters and Colour Matching

    • Dispersion of Light

    • Colour Triangle: Primary, Secondary and Complimentary Colours

    • Colour Pigments

    • Colour Parameters

    • Measurement of Colour Parameters

    • Factors Affecting Colour Matching

    • Colour Matching of Restorations with Tooth

    • Problems of Colour Matching

  • 3. Impression Materials (Auxiliary Materials)

    • Impression Materials

    • Ideal requirements of Impression Materials

    • Classification of Impression Materials

    • Impression Trays

    • Classification of Impression Trays

    • Stock Trays and Custom-made Special Trays

    • Impression Compound

    • Green Stick Compound

    • Tracing Compound

    • Border Moulding Compound

    • Border Moulding

    • Copper Tube Impression Technique or Copper Ring Technique

    • Tray Compound Type II

    • Impression Compound

    • Zinc Oxide Eugenol Impression Pastes

    • Types of ZnOE Impression Pastes

    • Properties of ZnOE Impression Materials

    • Hydrocolloids

    • Colloids

    • Agar-agar Impression Material (Reversible Hydrocolloid)

    • Alginate Impression Materials (Irreversible Hydrocolloids)

    • Elastomers (Elastomeric Impression Materials)

    • Elastomers

    • Polysulphide Impression Material

    • Condensation Polysilicones

    • Addition Polysilicones

    • Polyethers

  • 4. Gypsum Products: Cast and Dye Materials (Auxiliary Materials)

    • Gypsum

    • Gypsum Products

    • Type I: Rigid Impression Plaster

    • Type II: Dental (Model) Plaster Commonly known as Plaster of Paris

    • Composition of Type III: Dental Stone, Class I Stone

    • Type IV: Dye Stone, Improved

    • Stone, Class II Stone, Densite

    • Type V: High Strength, High Expansion-Dye Stone

    • Classification of Gypsum Products

    • Normal and Hygroscopic Setting Expansions

    • Dye Materials

    • Electroformed Dyes

  • 5. Dental Polymers-Resins

    • Polymerization: Structure, Properties

    • Monomers

    • Oligomer

    • Polymers

    • Polymerization

    • Classification of Polymers used in Dentistry

    • Factors Affecting the Properties of Polymers

    • Types of Polymers

  • 6. Prosthetic Applications of Polymer Resins

    • Denture-base Resins

    • Complete Denture Fabrication Procedures

    • Preliminary Steps

    • Compression Moulding Technique

    • Flasking: Multiple Mix Method

    • Dewaxing

    • Separating Medium (Tin-foil Substitute/Cold-mould Seal)

    • Heat Cure Acrylic Denture-base Resin

    • Manipulation of Denture-base Resins

    • Packing

    • Polymerization (Curing)

    • Deflasking and Finishing

    • Self, Cold-Cured (Chemically Activated) Acrylic Resins

  • 7. Biocompatible Aspects of Dental Materials

    • Biocompatibility of Various Dental Materials

  • 8. Restorative Materials Dental Cements

    • Ideal Requirements of Restorative Materials

    • Classification of Restorative Materials

    • Classification of Dental Cements-Nonmetallic Restoratives

    • Zinc Oxide Eugenol Cements

    • Manipulation of Zinc Oxide Eugenol Cements

    • Zinc Phosphate Cement

    • Frozen Slab Technique

    • Modifications of Zinc Phosphate Cement

    • Silicate Cements

    • Zinc Silicophosphate Cement, ADA 21

    • Zinc Polycarboxylate Cement, ADA 61

    • Glass Ionomer Cements (GICs)

    • Types of Glass lonomer Cements

    • Modifications of GIC

    • Sandwich Technique

    • Acrylic Resin Cements

    • Cavity Liners, Varnishes and Cement Bases

    • Pulp-protecting Materials

    • Cement Bases

    • Calcium Hydroxide Cement (DYCAL)

    • Gutta Percha

  • 9. Composite Restorative Resins

    • Unfilled Acrylic Resins

    • Composite Restorative Resins

    • Classification of Dental Composite Restorative Resins

    • Composition of Dental Composite Restorative Materials

    • Varieties of Composite Resins

  • 10. Bonding of Restorations

    • Bonding to Enamel

    • Bonding Agents

  • 11. Direct Filling Gold

    • Manufacturing Methods

  • 12. Silver Amalgam

    • Silver-tin System

    • Characteristic Properties

    • Mercury Health Hazards

    • Spherical Amalgam Alloys

    • Other Direct Filling Alloys

    • Copper Amalgam

  • 13. Dental Ceramics

    • Classification of Dental Ceramics

    • Feldspathic Porcelains

    • Varieties of Feldspars

    • Glass Modifiers

    • Toughening of Porcelain

    • Outline of Fabrication of Porcelain Article

    • Metal Ceramics

    • Alloys used for Metal Ceramics

    • Metal Ceramic Bonding

    • All Ceramic Restorations

    • Castable Glasses

    • Outline of Injection Moulding Glass Ceramic Technique

    • Hot Pressable Glass Ceramics

    • CAD-CAM Machinable-Chair-side Restoration Techniques

    • Copy Milling Technique

    • Cementation of Ceramic Fabrications

    • Artificial Porcelain Teeth

    • Criteria for Selection and use of Dental Ceramics

    • Dental Applications of Ceramics

  • 14. Dental Waxes (Auxiliary Materials)

    • Natural Waxes

    • Synthetic Waxes

    • Additives (Resins, Gums and Fats)

    • Classification of Dental Waxes

    • Characteristic Properties of Waxes

    • Pattern Waxes

    • Casting Waxes

    • Base Plate or Modelling Waxes

    • Processing Waxes

    • Boxing and Beading Waxes

    • Utility Wax

    • Sticky Wax

    • Carding Wax

    • White Wax

    • Blockout Wax

    • Carving Wax

    • Impression Waxes

    • Corrective Impression Waxes

    • Bite Registration Waxes

  • 15. Casting Investment Materials (Auxiliary Materials)

    • Casting Shrinkages and Methods of Compensations

    • Compensation of Casting Shrinkage

    • High Heat and Low Heat Casting Techniques

    • Investment Materials (ADA Specification No. 2)

    • Requirements of Investment Materials

    • Gypsum Bonded Investment (GBI) Material

    • Composition

    • Phosphate Bonded Investment (PBI)

    • Ethyl Silicate Bonded Investments (ESBIs)

    • Other Investment Materials

  • 16. Metals: Solidification and Microstructure

    • Characteristic Properties of Metals

  • 17. Alloys: Solidification and Phase Diagrams

    • Constitution-Equilibrium Phase Diagrams

    • Classification of Dental Casting Alloys

    • Solid Solutions

    • Silver-copper System

    • Features of Equilibrium Phase Diagrams

    • Gold-copper System

  • 18. Dental Casting Alloys

    • Brief History

    • Requirements of Dental Casting Alloys

    • Classification of Dental Casting Alloys

    • Identification of Dental Casting Alloys

    • Classification by Applications and Descriptions

    • Alloying Properties of Metals used in Gold Alloys

    • Gold

    • Platinum

    • Palladium

    • Silver

    • Copper

    • Iridium

    • Zinc

    • Indium

    • Gallium

    • High Noble and Noble Metal Casting Alloys

    • General Properties of HN and N Metal Casting Alloys

    • HN and N Metal Alloys for Metal Ceramic

    • Metal-Ceramic Bonding

    • General Properties of HN and N Metal Ceramic Alloys

    • Recent Noble Metal Alloys

    • HN and N Metal Casting Alloys for Removable Partial Denture Frameworks

    • Predominantly Base Metal (PBM) Casting Alloys

    • Classification of PBM Casting Alloys

    • Alloying Properties

    • General Properties of PBM Casting Alloys

    • Clinical Aspects

    • Micro Structure Metallography of PBM Alloys

    • Heat Treatments

    • PBM Alloys for Metal Ceramics

    • Outline of Casting Procedure of High Fusing PBM Alloys

    • Recovery and Finishing

    • Bronze: Copper Alloys for Casting

  • 19. Outline of Dental Alloy Casting Procedures

    • Introduction

    • Wax Pattern

    • Sprue Formers

    • Casting Ring Liner

    • Investing Procedure

    • Wax Burn out

    • Casting Machines

    • Melting of Alloys

    • Casting of Alloy

    • Devastating Recovery

    • Pickling

    • Heat Treatments for HN Alloys

    • Defective Castings: Classification, Causes and Remedies

    • Distortion Change of Shape or Size: Both Cause Misfit

    • Discolouration

    • Surface Roughness, Unevenness and Nodules

    • Solidification Shrinkage Porosities

    • Air Inclusion Porosities

    • Incomplete Castings

    • Fins

    • Titanium

    • Allotropic Forms-Microstructure

    • Alloys of Titanium

    • Problems in Casting of Titanium and its Alloys

    • Alternatives to Metal Casting Technology

  • 20. Wrought Alloys

    • Lattice Imperfections

    • Slip Resistance

    • Work Hardening and Annealing

    • Annealing Heat Treatments

    • Comparison of Cast (Also Recrystallised Annealed) and Wrought Structures

  • 21. Carbon Steels and Stainless Steels

    • Carbon Steels

    • Pure-Soft Iron

    • Carbon Steels

    • Eutectoid Steel

    • Tempering of Carbon Steels

    • Stainless Steels

    • Passivating Effect

    • Varieties of Stainless Steels and Compositions

    • Austenitic (18-8) Stainless Steels

  • 22. Materials Used in Orthodontia

    • Introduction

    • Classification of Orthodontic Wires

    • Manufacturing and Microstructures

    • Microstructures

    • ANSI/ADA Specification No. 32

    • Austenitic 18-8 Stainless Steel Wires

    • Elgiloy: (Co-Cr-Ni-Fe)

    • Wrought HN and N Metal Alloys

    • β-Titanium and Titanium Alloy Wires

    • Nickel Titanium: Niti:

    • Nitinol: Orthodontic Wires

    • Ni-Ti Endodontic Instruments

    • Recent Experimental Wires

  • 23. Brazing and Welding

    • Soldering and Brazing

    • Ideal Requirements of Solders (Brazing Fillers)

    • Types of Solders

    • Methods of Soldering

    • Pre Brazing and Post Brazing

    • Welding

    • Electrical Resistance or Spot Welding

    • Laser Welding

    • Cast Joining Technique

    • Casting to Embedded Alloys

    • Lasers in Dentistry

  • 24. Tarnish and Corrosion

    • Tarnish

    • Causes for Tarnish

    • Corrosion

    • Classification of Corrosions

    • Galvanic Corrosion

    • Heterogeneous Composition Corrosion

    • Concentration Cell (Crevice) Corrosion

    • Corrosion due to Rough Surface

    • Stress Corrosion

    • Corrosion Fatigue

    • Biocorrosion

    • Methods to Minimise Corrosions

  • 25. Dental Implants

    • Indications for Dental Implantations

    • Contraindications

    • Ideal Requirements of Implant Materials

    • Shapes, Designs and Components

    • Implant Designs (Types)

    • Biomechanism

    • Brief outline of Implant Placement

    • Materials used for Dental Implants

  • 26. Cutting and Finishing Mechanisms and Materials

    • Necessity for Finishing

    • Mechanisms of Cutting, Grinding and Polishing

    • Other Finishing Methods

    • Bulk Reduction By Cutting

    • Factors Affecting the Rate of Cutting (Efficiency)

    • Abrasives and Polishing Materials

    • Factors to Increase the Rate of Abrasion (Efficiency)

    • Abrasive Materials: Particle Size-Grit Numbers

    • Polishing

    • Glazing

    • Finishing and Polishing of Restorations

    • Dentifrices

    • Powder System

    • Paste or Gel Systems

    • Abrasivity of Dentifrices

  • Appendix

Nội dung

Chủ đề khoa học về vật liệu nha khoa rất quan trọng và không kém phần hấp dẫn đã là một phần không thể thiếu trong chương trình giảng dạy nha khoa của chúng tôi trong vài thập kỷ qua. Môn học, vốn rất đơn giản trong những năm đầu, bao gồm một số ít kim loại và phi kim, đã trải qua những phát triển phi thường, đặc biệt, trong ba thập kỷ qua. Khoa học vật liệu nha khoa ngày nay là một môn học bao gồm thực tế mọi vật liệu kim loại và phi kim loại có thể hình dung được mà các nhà khoa học đã có thể phát triển cho nhiều ứng dụng khác nhau trong công nghiệp và y học. Khi đã lưu ý những điều trên, chúng ta cần tự đặt câu hỏi, liệu chúng ta, những bác sĩ lâm sàng, đã có thể hiểu và đồng hóa vật lý và hóa học của tất cả những vật liệu tuyệt vời này một cách thực tế vào chương trình giảng dạy của mình hay chưa. Câu trả lời trung thực cho câu hỏi này không phải là có tự tin. Một trong những lý do chính của tình trạng này là do thiếu sách giáo khoa phù hợp với đầy đủ các vấn đề cơ bản, bằng một ngôn ngữ và văn phong, đủ đơn giản để hiểu để sử dụng cho các sinh viên BDS đầu tiên của chúng tôi. Nhiều giáo viên đã có nhiều nỗ lực táo bạo trong việc đưa ra sách giáo khoa về môn học này trong thời gian gần đây và tất cả đều được viết bởi các giáo viên, đặc biệt là các chuyên khoa lâm sàng, do đó nội dung vẫn ở trạng thái mất cân đối với sự nhấn mạnh không cân đối. của các khía cạnh lâm sàng của nha khoa với chi phí cơ bản. Những khó khăn trong việc hiểu bản chất hóa học và vật lý phức tạp của các vật liệu mới được phát triển và đưa vào sử dụng đã góp phần làm cho lacuna tồn tại trên thực địa. Giáo sư Shama Bhat, người tiên phong trong nỗ lực làm việc chăm chỉ để đạt được vị thế của một chủ đề độc lập về vật liệu nha khoa, từ kinh nghiệm dày dặn của mình với tư cách là một giáo viên tận tâm về các môn học cho sinh viên BDS, MDS và gần đây đã giới thiệu Thạc sĩ nha khoa tài liệu, đã mạo hiểm để viết một cuốn sách về chủ đề này. Những nỗ lực của anh ấy phần lớn đã thành công và nó sẽ được các sinh viên BDS và cả sinh viên sau đại học quan tâm. Đây là loại sách đầu tiên được giới thiệu ở nước ta vì ông là một nhà khoa học không chuyên về nha khoa đã giảng dạy và nghiên cứu trong ba thập kỷ qua. Tác phẩm có một số đặc điểm nổi bật khiến nó trở nên độc đáo theo nhiều nghĩa. Phong cách trình bày trong mỗi chương có một cách tiếp cận khác biệt rõ ràng làm cho nội dung thú vị và dễ hiểu đối với tất cả mọi người. Tác phẩm này là một bổ sung đáng hoan nghênh cho mảng sách về chủ đề này và nó sẽ đi một chặng đường dài trong việc lấp đầy khoảng trống trong giới học thuật của chúng ta, của thế kỷ này và sẽ được tất cả mọi người chấp nhận. Những nỗ lực chân thành của Giáo sư Shama Bhat và Ông Nandish trong việc tạo ra này là đáng khen ngợi và đóng góp của họ cho khoa học vật liệu nha khoa ở nước ta là rất lớn.

Ngày đăng: 01/07/2021, 14:33

TỪ KHÓA LIÊN QUAN