Clevo P650RS( g) P651RS( g) service manual

P650RS(-G) / P651RS(-G) Preface Notebook Computer P650RS(-G) / P651RS(-G) Service Manual Preface I Preface Notice The company reserves the right to revise this publication or to change its contents without notice Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes Preface Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer Version 1.0 July 2016 Trademarks Intel and Intel Core are trademarks of Intel Corporation Windows® is a registered trademark of Microsoft Corporation Other brand and product names are trademarks and /or registered trademarks of their respective companies II Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers It is organized to allow you to look up basic information for servicing and/or upgrading components of the P650RS(-G) / P651RS(-G) series notebook PC The following information is included: Chapter 1, Introduction, provides general information about the location of system elements and their specifications Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade elements of the system Preface Appendix A, Part Lists Appendix B, Schematic Diagrams Appendix C, Updating the FLASH ROM BIOS III Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to persons when using any electrical equipment: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool Avoid using a telephone (other than a cordless type) during an electrical storm There may be a remote risk of electrical shock from lightning Do not use the telephone to report a gas leak in the vicinity of the leak Use only the power cord and batteries indicated in this manual Do not dispose of batteries in a fire They may explode Check with local codes for possible special disposal instructions This product is intended to be supplied by a Listed Power Unit as follows: Preface • AC Input of 100 - 240V, 50 - 60Hz, DC Output of 19.5V, 11.8A (230 Watts) minimum AC/DC Adapter FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation IV Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged To prevent this, follow these suggestions: Don’t drop it, or expose it to shock If the computer falls, the case and the components could be damaged Do not expose the computer to any shock or vibration Do not place anything heavy on the computer Keep it dry, and don’t overheat it Keep the computer and power supply away from any kind of heating element This is an electrical appliance If water or any other liquid gets into it, the computer could be badly damaged Do not leave it in a place where foreign matter or moisture may affect the system Don’t use or store the computer in a humid environment Do not place the computer on any surface which will block the vents Preface Do not expose it to excessive heat or direct sunlight Do not place it on an unstable surface Follow the proper working procedures for the computer Shut the computer down properly and don’t forget to save your work Remember to periodically save your data as data may be lost if the battery is depleted Do not turn off the power until you properly shut down all programs Do not turn off any peripheral devices when the computer is on Do not disassemble the computer by yourself Perform routine maintenance on your computer V Preface Avoid interference Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields These can hinder proper performance and damage your data Take care when using peripheral devices Use only approved brands of peripherals Unplug the power cord before attaching peripheral devices Preface Power Safety The computer has specific power requirements:  VI • • Power Safety Warning • Before you undertake any upgrade procedures, make sure that you have turned off the power, and disconnected all peripherals and cables (including telephone lines and power cord) It is advisable to also remove your battery in order to prevent accidentally turning the machine on • • • Only use a power adapter approved for use with this computer Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply If you are unsure of your local power specifications, consult your service representative or local power company The power adapter may have either a 2-prong or a 3-prong grounded plug The third prong is an important safety feature; not defeat its purpose If you not have access to a compatible outlet, have a qualified electrician install one When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices Before cleaning the computer, make sure it is disconnected from any external power supplies Do not plug in the power cord if you are wet Do not use the power cord if it is broken Do not place heavy objects on the power cord Preface Battery Precautions • Only use batteries designed for this computer The wrong battery type may explode, leak or damage the computer • Do not continue to use a battery that has been dropped, or that appears damaged (e.g bent or twisted) in any way Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire • Recharge the batteries using the notebook’s system Incorrect recharging may make the battery explode • Do not try to repair a battery pack Refer any battery pack repair or replacement to your service representative or qualified service personnel • Keep children away from, and promptly dispose of a damaged battery Always dispose of batteries carefully Batteries may explode or leak if exposed to fire, or improperly handled or discarded • Keep the battery away from metal appliances • Affix tape to the battery contacts before disposing of the battery • Do not touch the battery contacts with your hands or metal objects Battery Guidelines Preface The following can also apply to any backup batteries you may have • If you not use the battery for an extended period, then remove the battery from the computer for storage • Before removing the battery for storage charge it to 60% - 70% • Check stored batteries at least every months and charge them to 60% - 70%  Battery Disposal The product that you have purchased contains a rechargeable battery The battery is recyclable At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream Check with your local solid waste officials for details in your area for recycling options or proper disposal Caution Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Discard used battery according to the manufacturer’s instructions Battery Level Click the battery icon in the taskbar to see the current battery level and charge status A battery that drops below a level of 10% will not allow the computer to boot up Make sure that any battery that drops below 10% is recharged within one week VII Preface Related Documents You may also need to consult the following manual for additional information: User’s Manual on CD/DVD This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup program It also describes the installation and operation of the utility programs provided with the notebook PC System Startup Remove all packing materials Place the computer on a stable surface Insert the battery and make sure it is locked in position Securely attach any peripherals you want to use with the computer (e.g keyboard and mouse) to their ports Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter Use one hand to raise the lid/LCD to a comfortable viewing angle (do not exceed 135 degrees); use the other hand (as illustrated in Figure 1) to support the base of the computer (Note: Never lift the computer by the lid/LCD) Press the power button to turn the computer “on” Preface 135° Figure Opening the Lid/LCD/ Computer with AC/DC Adapter Plugged-In  Shut Down Note that you should always shut your computer down by choosing the Shut down command in Windows (see below) This will help prevent hard disk or system problems Click the icon in the Start Screen and choose Shut down from the menu Or Right-click the Start button at the bottom of the Start Screen or the Desktop and choose Shut down or sign out > Shut down from the context menu VIII Schematic Diagrams Audio Board P65_ESS_A 3/3 5/16 Follow٥‫ش‬ᒵሁ 6-24-30003-009 D02B AD3 AVLC5S02100 AGND 3/21 ADD ESS board ۘᖲ‫ܑܒ‬pin AHP_DET AD1 A AAL898_GPIO33 A D02 C 3/18 Add (follow P870DM2) D D A_5V B.Schematic Diagrams Sheet 79 of 91 Audio Board P65_ESS_A 3/3 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11 AJD_SENSEA AJD_SENSEB AMIC1-R AMIC1-L ASPDIFO ASIDE_R ASIDE_L C 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 78 78 A_5VS AL4 AL3 AR1 ଥ‫ޏ‬ESS bo sound ംᠲ 4/28 D02 0_04 0_04 AHP_DET AAUDIO_DET AR2 22K_04 D02A FCM1005KF-121T03 FCM1005KF-121T03 AGND 10 50238-0407N-001 6-20-41A40-220 AHP-LC AHP-RC L R AHP_SENSE AC3 100p_50V_NPO_04 100p_50V_NPO_04 ATPS65131PS 78 ASYS_CLK 77 ASYS_DATA 77 3/1 change A_AUDG 77 ASPDIFO ASPDIFO A_AUDG A_AUDG AL1 FCM1005KF-121T03 AAL898_VREFO 4/28 78 AC7 AR9 220_04 ଥ‫ޏ‬ESS bo sound ംᠲ AGND AAL898_GPIO33 AGND AGND AJ_MIC1 D02A A_AUDG AJD_SENSEA 4/20 net ଥ‫إ‬ AMIC1-R AL2 FCM1005KF-121T03 AMIC1-L AL6 FCM1005KF-121T03 A AC1 0.1u_16V_Y5V_04 AGND *0_04 4AR *0_04 2AR *0_04 5AR *0_04 3AR *0_04 6AR *0_04 AC9 100p_50V_NPO_04 100p_50V_NPO_04 A_AUDG AL7 FCM1005KF-121T03 R AL5 FCM1005KF-121T03 L AH2 *H4_2D2_2 AH1 *H4_2D2_2 AH4 *H7_5D2_8 JK06006BQ7648 PCB Footprint = 2SJ-T351-018-A A_AUDG M:6-20-B28L0-006 S:6-20-B28M0-006 77,78 A_3.3V 77,78 A_5V AH3 *H7_5D2_8 Title AGND AGND AGND Size A4 Date: B - 80 Audio Board P65_ESS_A 3/3 ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ AGND A_AUDG AC10 680p_50V_X7R_04 A_AUDG B AJ_SIDE1 ASIDE_DET ASIDE_L A_AUDG A_AUDG ASIDE_R AC2 680p_50V_X7R_04 M:6-20-B28L0-006 S:6-20-B28M0-006 D02 D02 3/29 DEL AC5 , ADD AR58 (ᐗ೸DEBUG) JK06006BQ7648 PCB Footprint = 2SJ-T351-018-A AC6 ASIDE_SENSE D02B 1AR AMIC_SENSE 20K_1%_04 AMIC_SENSE 39.2K_1%_04 AHP_SENSE 5.1K_1%_04 ASIDE_SENSE AR11 AR5 AR4 AJD_SENSEB 0_06 C 33p_50V_NPO_04 2/18 headphone/spdif signal swap un-plug low AR58 TX TOJ-0015STR2-2-H4-PA9T-J P/N = 6-20-B2820-005 0.1u_16V_Y5V_04 PCB Footprint = TOJ-001ST-2-H4 A_AUDG A_AUDG 0.1u_16V_Y5V_04 DRIVE IC 22K_04 D01A 0.1u_16V_Y5V_04 A B C D01A B AC11 D02B AC8 STR CONNECT AC12 A_AUDG A_5VS AC4 D02A A_-15V A_-15V D01A AR6 AR3 AHEADPHONE-LC AHEADPHONE-RC 2/26 modify A_+15V A_+15V AJ_SPDIF1 BAT54CS3 A_3.3V AJ_AUDIO1 A [79] AUDIO BOARD_P65_ESS_A 3/3 Document Number P650RS Rev 6-71-P65S8-D02B Thursday, May 26, 2016 Sheet 79 D02B of 91 Schematic Diagrams Audio Board P67_3DAMP_E 3D HeadPhone AMP D02A E3D_HP_L E_5V Del 615 co-lay EC7 EC11 EC23 EC28 EC25 E3D_HP_L ER16 54.9_1%_04 EHEADPHONE-LC E3D_HP_R ER13 54.9_1%_04 EHEADPHONE-RC + 16 15 14 13 VSS EC3 C2_3DL C1_3DL PGND C1_SDR 0.01u_16V_X7R_04 EC2 0.01u_16V_X7R_04 EC1 0.01u_16V_X7R_04 EC5 0.01u_16V_X7R_04 E_AUDG 17 ‫ڼ‬ຝ։ૉ‫ڶ‬՛ࣨᓮ࣋࣍M/B PWR OFF, HP_JSGND=0V PWR ON, HP_JSGND=2.5V SV3H612V EHP_JSGND_EN 15 VDD JD VDD LS-IN EHP_SCL EHP_SDA ER4 ER6 22_1%_04 22_1%_04 D JD From SMBUS E_AUDG ESYS_CLK ESYS_DATA EHP_JSGND EC6 EC8 10p_50V_NPO_04 10p_50V_NPO_04 E_AUDG EGND E3D_HP_R C D02A Del 615 co-lay E_AUDG Sheet 80 of 91 Audio Board P67_3DAMP_E EHP_SENSE E_3.3VS D EJ_AUDIO1 ER2 1M_04 QB EQ2 MTN7002ZHS3 SV3H615 ARa Ղ0ohm (AUDIO/B) SV3H612 QA,QB MTN7002ZHS3, RB,RC 1Mohm EGND E_5V QA EQ1 MTN7002ZHS3 EGND C G RC G S SGND 14 1u_6.3V_X5R_04 13 SV3H615 2200p_50V_X7R_04 SV3H612 2200p_50V_X7R_04 pin 15_1%_04 EHP_JSGND ER3 E_AUDG EJD_SENSEA EJD_SENSEB EMIC1-R EMIC1-L ESPDIFO ESIDE_R ESIDE_L 29 27 25 23 21 19 17 15 13 11 30 28 26 24 22 20 18 16 14 12 10 30 28 26 24 22 20 18 16 14 12 10 G D02 EJ_SPDIF1 EHEADPHONE-R EHEADPHONE-L EHEADPHONE-LC EHEADPHONE-RC E_AUDIO_DET D02A ESYS_CLK ESYS_DATA E_AUDG EL7 EL6 FCM1005KF-121T03 FCM1005KF-121T03 EGND D01A ER23 ER20 22K_04 22K_04 EC29 EC30 100p_50V_NPO_04 100p_50V_NPO_04 ER26 E_5VS 47K_04 A B C E_AUDG EHP_JSGND_EN E_AUDG 50238-0307N-001 ଥ‫إ‬pin1‫ۯ‬ᆜ PCB Footprint = 87126-30-06 6-20-51A40-215 EGND E_AUDG M:6-20-51A40-215 S:6-20-51A50-215 B EQ3 2SK3018S3 D01A E_5VS S 29 27 25 23 21 19 17 15 13 11 E_AUDG ESPDIFO EL1 E_AUDG EC13 E_AUDG 0.1u_16V_Y5V_04 FCM1005KF-121T03 DRIVE IC TX TOJ-0015STR2-2-H4-PA9T-J P/N = 6-20-B2820-005 PCB Footprint = TOJ-001ST-2-H4 B EC12 ER8 220_04 STR CONNECT EGND 33p_50V_NPO_04 EHP_JSGND EJD_SENSEA ER19 20K_1%_04 EGND Del 615 co-lay EGND 39.2K_1%_04 EHP_SENSE 5.1K_1%_04 ESIDE_SENSE ER25 ER11 EJD_SENSEB D02A EMIC_SENSE D02A 5/17 ჺᠦࠟଡPHONE JACKխၴ EH3 *H4_2D2_2 EH2 *H4_2D2_2 EH4 *H7_5D2_8 ESIDE_SENSE EH1 *H7_5D2_8 E_AUDG EL3 FCM1005KF-121T03 ESIDE_L EL2 FCM1005KF-121T03 3/2 change HP/SPDIF signal EGND EGND EGND EC9 680p_50V_X7R_04 EGND E_AUDG A EC24 0.1u_16V_Y5V_04 EC14 0.1u_16V_Y5V_04 EC22 0.1u_16V_Y5V_04 EC4 0.1u_16V_Y5V_04 EGND 1ER *0_04 4ER *0_04 2ER *0_04 5ER *0_04 3ER *0_04 6ER *0_04 EJ_MIC1 EJ_SIDE1 D01A ESIDE_R EC10 680p_50V_X7R_04 E_AUDG EL5 FCM1005KF-121T03 EMIC1-L EL4 FCM1005KF-121T03 JK06006BQ7648 PCB Footprint = 2SJ-T351-018-A P/N = 6-20-B28L0-006 vendor P/N = 2SJ-T351-018 EC18 EC19 100p_50V_NPO_04 100p_50V_NPO_04 E_AUDG M:6-20-B28L0-006 S:6-20-B28M0-006 E_AUDG JK06006BQ7648 PCB Footprint = 2SJ-T351-018-A P/N = 6-20-B28L0-006 vendor P/N = 2SJ-T351-018 M:6-20-B28L0-006 S:6-20-B28M0-006 E_AUDG A ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title E_AUDG Size A3 Date: 5 EMIC_SENSE EMIC1-R [80] AUDIO BOARD_P67_3DAMP_E Document Number P650RS Rev 6-71-P67P8-D02A Friday, May 27, 2016 Sheet 80 D02A of 91 Audio Board P67_3DAMP_E B - 81 B.Schematic Diagrams EC16 EC15 VSS 12 11 10 D INL VREF REXT INR D S E_HP_INR OUTL VDD JD SGND 470_04 OUTA SDA SCL C2_3DR E_HP_INL EEFCX0J221YR 220u_6.3V_SMD-D 470_04 EC17 E_HP_L ER18 EHEADPHONE-L EC20 1u_16V_X7R_06 E_HP_R ER17 EHEADPHONE-R EC21 1u_16V_X7R_06 *22u_6.3V_X5R_08 EU1 22u_6.3V_X5R_08 EHP_JSGND 0.1u_16V_Y5V_04 2.2u_6.3V_X5R_04 D Schematic Diagrams P650RS Power Board B3.3VS BJ_BTN1 D B3.3VS D NC1 NC2 20mil FP226H-004S10M PCB Footprint = fp226h-004xxxm_r BR1 220_1%_04 BGND 20mil POWER BUTTON B_SW1 TJE-532-Q-T/R C BC1 *0.1u_16V_Y5V_04 P670RG-M POWER SWITCH LED BGND BM_BTN# C BD2 BC2 A PCB Footprint = tje-53x-q A Sheet 81 of 91 P650RS Power Board 20mil B_SW1 5 BD1 NON-Medion 0.1u_50V_Y5V_06 BGND BD3 Medion *V15AVLC0402 BLUE RE2*0.8 2P P/N = RY-SP190DNB84-5/1X BGND P2808A1, ‫ߪء‬ᄎᗈᄤ, P2808A1 ኙ࿜ D26 mounted VARISTOR BLUE RE2*0.8 2P P/N = RY-SP190DNB84-5/1X BGND P670Rx-M POWER SWITCH LED C P650Rx, P670Rx POWER SWITCH LED C VARISTOR 6-24-30003-006 B.Schematic Diagrams BM_BTN# BGND 6-53-3050B-B41 100g B B BH1 BH4 *H2_2B4_0D2_2 BH3 2 A 4 B - 82 P650RS Power Board *0_04 5BR *0_04 3BR *0_04 6BR *0_04 ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ *MTH7_0D2_3 *MTH7_0D2_3 Title BGND BGND Size A4 Date: 4BR *0_04 BH2 *H2_2B4_0D2_2 BGND *0_04 2BR 1BR A [81] P650RS POWER BOARD_B Document Number P650RS Rev D02 6-71-P65SC-D02 Thursday, May 26, 2016 Sheet 81 of 91 Schematic Diagrams P650RS HDD Board SATA PORT1 HJ_SATA1 S1 S2 S3 S4 S5 S6 S7 10 12 14 16 18 20 22 24 26 28 30 HGND H_SATA_TXP1 H_SATA_TXN1 H_SATA_RXN1 H_SATA_RXP1 H_5V H_5VS H_3.3VS D NC1 NC2 HGND HC14 HC11 *0.01u_16V_X7R_04 HGND HC20 HC9 0.1u_16V_Y5V_04 1u_6.3V_X5R_04 10u_6.3V_X5R_06 11 13 15 17 19 21 23 25 27 29 HGND HSATA_TXP1 HSATA_TXN1 HSATA_RXN1 HSATA_RXP1 D HP670RG-M_TPLED H_3.3VS 3/28 ଥ‫إ‬footprint,ՠᐗ૞‫ޣ‬ D02 HC10 11 13 15 17 19 21 23 25 27 29 51049-03041-001 P/N = 6-21-C2420-215 PCB Footprint = 50008-0304X *10u_6.3V_X5R_06 H_5VS HGND 10 12 14 16 18 20 22 24 26 28 30 + HC6 EEFCX0J221YR 220u_6.3V_SMD-D 51824-0227A-001 P/N = 6-20-437J0-022 PCB Footprint = 50887-0220A-XXX For P670Rx-M TP LED Ղٙ 220u,6.3V,ESR=15mȍ,H=1.9mm HGND HGND H5V_TPLED HU2 H_5V VIN VOUT HC15 C GND 10u_6.3V_X5R_06 Medion_TPLED EN# OC# HGND HP670RG-M_TPLED uP7549UMA5-20 PCB Footprint = M-SOT23-5 Medion_TPLED HR9 HSATA_RXN1 HSATA_RXP1 HC1 HC4 0.01u_16V_X7R_04 0.01u_16V_X7R_04 HOST HSATA_TXN1 HR2 *0_04 HR7 *0_04 HTXN1 HSATA_RXN1 HR1 *0_04 HR6 *0_04 HRXN1 HSATA_RXP1 HR3 *0_04 HR5 *0_04 HRXP1 AOP AON DEVICE BIN BIP DE_B DE_A 17 H_3.3VS co-lay, place under SN75LVCP601 HR14 HR21 HR18 *100K_04 *100K_04 *100K_04 HR15 HR20 *0_04 *0_04 HR19 2K_1%_04 B EN BON BOP Note: Close to Re-driver IC HTXP1 HGND Note: 10 16 20 AIP AIN From PCH *0_04 50501-0060N-001 6-20-94K30-106 Medion_TPLED HGND Close to Re-driver IC VCC33 VCC33 VCC33 VCC33 0.01u_16V_X7R_04 0.01u_16V_X7R_04 HR8 C HR11 4.7K_04 T-PAD GND GND HC5 HC2 *0_04 *10u_6.3V_X5R_06 Medion_TPLED Sheet 82 of 91 P650RS HDD Board 15 14 HTXP1 HTXN1 12 11 HRXN1 HRXP1 HC19 0.01u_16V_X7R_04 H_SATA_TXP1 HC18 0.01u_16V_X7R_04 H_SATA_TXN1 HC17 0.01u_16V_X7R_04 H_SATA_RXN1 HC16 0.01u_16V_X7R_04 H_SATA_RXP1 To Conn SMB_SCK SMB_SDA PIN16 HGND HSATA_TXP1 HSATA_TXN1 HR4 0.1u_16V_Y5V_04 Medion_TPLED 0_04 18 19 1u_6.3V_X5R_04 PIN10 HGND HU1 HSATA_TXP1 HC3 HC12 0.1u_16V_Y5V_04 Port HGND *0_04 REXT HC7 PIN6 B HR10 HGND 21 13 HC13 HC8 H_3.3VS SATA re-driver 0.01u_16V_X7R_04 HJ_LEDTP1 100 mil ASM1466_new HR13 HR17 *100K_04 *100K_04 HR12 HR16 *0_04 *0_04 H_3.3VS HGND HGND HGND A A 2/2 ADD HH2 *h7_0d2_8 HGND HH1 *H6_3D2_3 HH3 *H6_3D2_3 HGND HGND HH4 *H6_3D2_3 1HR *0_04 4HR *0_04 2HR *0_04 5HR *0_04 3HR *0_04 6HR *0_04 ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size A3 HGND Date: [82] P650RS HDD BOARD_H Document Number P650RS Rev D02 6-71-P65SN-D02 Thursday, May 26, 2016 Sheet 82 of 91 P650RS HDD Board B - 83 B.Schematic Diagrams P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 HJ_MB1 Schematic Diagrams P650RS LED Board D01A LJ_LED1 NC1 NC2 3/3 follow P670RP 3/3 follow P670RP D01A D02A LD9 LLED_ACIN LR3 680_04 Oragne LD10 LLED_BAT_CHG LLED_PWR LR4 330_04 UYG LLED_BAT_FULL D UHY LR2 330_04 UYG RY-SP195UHYUYG4 AC IN/POWER ON LED ‫إ‬ᅃ L_3.3VS 680_04 Green RY-SP195UHYUYG4 LED_GND LR1 Oragne UHY Green BAT CHARGE/FULL LED ‫إ‬ᅃ LED_GND LED_GND 1LR *0_04 4LR *0_04 2LR *0_04 5LR *0_04 3LR *0_04 6LR *0_04 L_3.3VS C C LR6 220_04 220_04 LD6 LD5 ‫إ‬ᅃ LD4 LR5 D01A LD3 220_04 A LR7 220_04 A LR8 220_04 A LR9 A A 220_04 A LR11 LD2 LD1 RY-SP190YG34-5M dGPU LED SCROLL LOCK LED CAPS LOCK LED NUM LOCK LED AIRPLANE LED HDD LED LR14 *0_04 C LLED_SCROLL# LLED_CAP# LLED_NUM# C RY-SP190YG34-5M C RY-SP190YG34-5M C RY-SP190YG34-5M C RY-SP190YG34-5M C RY-SP190YG34-5M C Sheet 83 of 91 P650RS LED Board D02A FP225H-012S10M PCB Footprint = fp225-012g M:6-20-94K50-012 S:6-20-94K60-012 L_WLAN_AIRPLANE# LSATA_LED# B L_dGPU_LED B E B LQ1 DTC114EUA LLED_PWR 4/29 follow common design LED_GND D01A 3/8 ֞உଥ‫إ‬ LLED_ACIN LH1 LH4 *H2_2B4_0D2_2 *H2_2B4_0D2_2 LLED_BAT_FULL LH3 *H6_0D2_3 LH2 *H6_0D2_3 *V15AVLC0402 1 LD13 *V15AVLC0402 LD14 *V15AVLC0402 LED_GND LED_GND LED_GND LED_GND LED_GND Title Size A4 Date: B - 84 P650RS LED Board LED_GND LED_GND ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ A ᔾLEDጤ ጤឭ࣋ LED_GND *V15AVLC0402 LD12 LD11 D02A 1 LLED_BAT_CHG B.Schematic Diagrams LLED_ACIN LLED_PWR LLED_BAT_CHG LLED_BAT_FULL LLED_NUM# LLED_CAP# LLED_SCROLL# L_WLAN_AIRPLANE# L_dGPU_LED LSATA_LED# 12 11 10 D 2 A [83] P650RS LED BOARD_L Document Number P650RS Rev 6-71-P65S4-D02 Friday, May 27, 2016 Sheet 83 D02 of 91 Schematic Diagrams P650RS FP Board F2.5V F3.3V FLED1 FMOSI FMCLK FDISCON F_XOUT C 10 F2.5V 11 F3.3V 12 F_RST_N 13 14 15 EGND MODE AVDD DP DVDD LED1 SPI_CS SPI_MISO SPI_CLK LED2 DISCON DVSS_1 UVSS AVSS_1 XO DVDD_1 RVDD RESETN DVSS SGND ES603-LGA30 : 6-03-00603-0N0 PCB Footprint: ES603-LGA30 CHANGE ES603-LGA30-1 2015/8/10 B 29 FUSB_PP 28 FUSB_PN 27 UVDD ES603-WB PCB Footprint = es603-lga30-1 FGND D DN VDDIO SPI_MOSI 30 FJ1 26 FMCS 25 FMISO 24 FLED2 11 13 15 17 19 21 23 F2.5V FMOSI FMCLK FMCS FMISO F3.3V F_XIN F_XOUT F_RST_N 23 F3.3V F3.3V 10 12 14 16 18 20 22 24 FLED1 FLED2 FDISCON FUSB_PN FUSB_PP 22 21 XI Sheet 84 of 91 P650RS FP Board SPNZ-24S1-B-017-1-R P/N = 6-21-41700-212 F_XIN FGND FGND 20 AVSS C 19 AVDD_1 F3.3V 18 CLK_SEL NOTE: CLK_SEL CLK_SEL=HIGH (NC) , FREQ=12MHz Crystal CLK_SEL=LOW , FREQ=48MHz OSC 17 EGND_2 16 EGND_1 FGND D01A 3/3 ଥ‫ޏ‬footprint ՠᐗംᠲរଥ‫إ‬ B **GU1ல லᢰլ‫ྒྷףױ‬រ,‫א‬ ‫܍א‬Ղٙ৵࿍ሁ FJ1 23 24 BOTTON VIEW 23 24 TOP VIEW ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ A Title Size A4 Date: A [84] P650SS FP BOARD_F Document Number P650RS Rev D02 6-71-P65SF-D01A Thursday, May 26, 2016 Sheet 84 of 91 P650RS FP Board B - 85 B.Schematic Diagrams F3.3V NOTE: MODE MODE=HIGH (NC) , USB MODE MODE=LOW , SPI MODE FU1 D Schematic Diagrams P650RS Click Board TR7 TR6 27.4_1%_04 27.4_1%_04 TUSB_PN10 TUSB_PP10 TO M/B TGND G1 TH1 H3_7B7_0D3_7 G2 TH2 H3_7B7_0D3_7 T_TP_SMB_CLK T_TP_SMB_DAT TD3 TD1 6-20-94K30-108 0.1u_10V_X7R_04 TGND TGND 2/17 me modify value TGND T_TP_CLK T_TP_DATA T_TP_BTN_L T_TP_BTN_R FP225H-008S11M fp225h-008gxxxm_r TC8 T_TP_SMB_DAT T_TP_SMB_CLK FP225H-006S10M fp225h-006xxxm_R M:6-20-94K10-006 S:6-20-94K00-006 It is strongly recommended that the TESD_GND has a dedicated connection to the system chassis or cable shield Ꭽਪ BOT૿ ૿ T_TP_VCC T_TP_DATA T_TP_CLK TO T/P PIN T_TP_BTN_R TGND TD2 TD4 2 FP226H-004S10M PCB Footprint = fp226h-004xxxm_r M:6-20-94A40-004 S:6-20-94A60-004 D TGND TGND CLICK B'D 6-34-M72SS-010-1 TH4 *H3_0D3_0 T3.3V TH3 *H3_0D3_0 TU1 TC9 Sheet 85 of 91 P650RS Click Board TUSB_PP10 0.1u_10V_X7R_04 VP NC NC VN CH2 CH1 TUSB_PN10 CM1293A-02SO TGND TGND FOR ESD, ᔾ२FFC CONNECTORឭ࣋ C C T_XIN TR1 TGND 15p_50V_NPO_04 11 13 15 17 19 21 23 T2.5V TMOSI TMCLK TMCS TMISO TGND TX1 HSX321G_12Mhz TC4 TJ_FPB1 T_XOUT 1M_04 T_XIN T_XOUT T_RST_N TC5 15p_50V_NPO_04 T3.3V TGND 10 12 14 16 18 20 22 24 TLED1 TLED2 TDISCON NOTE: MODE MODE=HIGH (NC) , USB MODE MODE=LOW , SPI MODE TUSB_PN10 TUSB_PP10 *CON24A QPOFZ-24R2-XD-Z-LD TGND TGND TGND Place Botton B B T2.5V T3.3V TC2 TC7 TC1 TC6 0.1u_10V_X7R_04 4.7u_6.3V_X5R_06 0.1u_10V_X7R_04 4.7u_6.3V_X5R_06 TLED1 TR2 10K_04 TLED2 TR3 10K_04 TGND TGND NOTE: CLK_SEL CLK_SEL=HIGH (NC) , FREQ=12MHz Crystal CLK_SEL=LOW , FREQ=48MHz OSC TGND T3.3V S CLOSE TO SENSOR POWER PIN G TUSB_PP10 TR5 1.5K_04 TR4 47K_04 TDISCON 1TR TQ1 AO3415 D B.Schematic Diagrams T_TP_BTN_L *V15AVLC0402 D *V15AVLC0402 TJ_FP1 NC1 NC2 NC1 NC2 FP226H-004S10M JXT_FP226H-004XXAM TGND M:6-20-94A40-004 S:6-20-94A60-004 TJ_MB TO BOTTOM/B T_TP_VCC TJ_TP1 TL1 FCM1005KF-121T03 2 W/O FPழ ழΔ‫׽‬Ղ‫ڼ‬೴ሿٙ TJ_CLICK *V15AVLC0402 T3.3V *V15AVLC0402 *0_04 4TR *0_04 2TR *0_04 5TR *0_04 3TR *0_04 6TR *0_04 A A T3.3V T_RST_N TC3 1u_6.3V_X5R_04 Title Size A3 TGND Date: B - 86 P650RS Click Board ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ [85] P650RS CLICK BOARD_T Document Number P650RS Rev D02 6-71-P65S2-D02 Thursday, May 26, 2016 Sheet 85 of 91 Schematic Diagrams P650RS USB Board 1/3 LAN (RTL8411B) KRSET KR30 2.49K_1%_04 KR31 *1K_04 KR24 10K_04 (>20mil) Ra KREGOUT KR33 KJ_CARD1 KVDD10 KX1 C286-001_25MHZ PCB Footprint = FSX3M KC40 KC39 10p_50V_NPO_04 KR23 KAVDD33 KSD_D2/MS_CLK_R P9 KSD_D3/MS_D3_R P1 KSD_CMD/MS_D2_R P2 C KD2 A RB751S-40C2 KPCIE_W AKE# SD_DATA3 SD_CMD P3 LDO Modeழ ழ: La,Ca,Cb լՂٙ,RaՂ Ղٙ 88 88 KC38 TO EC8587 PIN123 LAN_WAKEUP# 0.1u_16V_Y5V_04 KLED1/GPO KLED2 KLAN_W AKEUP# KSD_CLK/MS_D0_R SD_VDD P5 SD_CLK P6 T123 T122 KSD_D0/MS_D1_R P7 KSD_D1_R P8 SD_VSS2 SD_DATA0 KGND 48 47 46 45 44 43 42 41 40 39 38 37 KGND KU3 49 E_PAD KGND KMS_BS/SD_W P# KSD_CD# KR37 KLAN_MDIP1 KLAN_MDIN1 KLAN_MDIP2 KLAN_MDIN2 KVDD10 KLAN_MDIP3 KLAN_MDIN3 B KAVDD33 K3.3VS MDIP0 MDIN0 AVDD10 MDIP1 MDIN1 MDIP2 MDIN2 AVDD10 MDIP3 MDIN3 HV_GIGA VDD3 RTL8411B QFN48 36 35 34 33 32 31 30 29 28 27 26 25 REG_OUT VDDREG ENSWREG VDD1 VD33 ISOLATEBPIN PERSTBPIN CLKREQBPIN MS_BS/SD_WP# DV33_18 HSON HSOP KC15 KGND KISOLATEB KPERSTB KR44 KCLKREQB KMS_BS/SD_W P# KRTL8411B_HSON KRTL8411B_HSOP Remind that R109 using the main power (S0 power) KVDD10 KAVDD33 *0402_short KVDD33/18 88 KR38 KVDD10 KVDD10 KVDD10 0_04 KLAN_CLKREQ# LAN_CLKREQ#‫ڕ‬ ‫ڕ‬լࠌ‫ױش‬ឰၲ,࣍ ࣍PCHጤ ጤऴ൷PULL DOWN 0.1u_10V_X7R_04 0.1u_10V_X7R_04 KPCIE_RXN5_GLAN KPCIE_RXP5_GLAN C KC13 GIGA LAN 0.1u_16V_Y5V_04 PIN3 KEVDD10 KSD_D1 KSD_D0/MS_D1 KSD_CLK/MS_D0 KSD_CMD/MS_D2 KSD_D3/MS_D3 KSD_D2/MS_CLK KCLK_PCIE_GLAN# KCLK_PCIE_GLAN 88 88 KPCIE_TXN5_GLAN KPCIE_TXP5_GLAN 88 88 KENSW REG KR34 0.1u_16V_Y5V_04 PIN8 KCARD_3V3 0.1u_16V_Y5V_04 PIN32 0.1u_16V_Y5V_04 PIN46 KGND 40 mil 0.2R_5%_06 KR26 *28mil_short-p PIN13 KC49 0.1u_16V_Y5V_04 PIN20 1u_6.3V_X5R_04 PIN20 KGND KAVDD33 KLAN_MDIN0 KLAN_MDIP0 KLAN_MDIN1 KLAN_MDIP1 12 11 KLAN_MDIN2 KLAN_MDIP2 KLAN_MDIN3 KLAN_MDIP3 TD4TD4+ TD3TD3+ 0.1u_16V_Y5V_04 PIN11 KC7 10 KC11 0.1u_16V_Y5V_04 PIN32 0.1u_16V_Y5V_04 PIN48 40 mil MX4MX4+ MX3MX3+ TD2TD2+ TD1TD1+ *28mil_short-p KC12 MX2MX2+ MX1MX1+ TCT4 TCT3 TCT2 TCT1 MCT4 MCT3 MCT2 MCT1 13 14 16 17 KLMX1KLMX1+ KLMX2KLMX2+ KGND KD3V3 60 mil KGND 19 20 22 23 KLMX3KLMX3+ KLMX4KLMX4+ KC36 KC37 0.1u_16V_Y5V_04 2.2u_6.3V_X5R_04 2.2u_6.3V_X5R_04 0.01u_16V_X7R_04 *28mil_short-p KGND ᐗ೸৬ᤜቃఎ KC45 0.1u_16V_Y5V_04 KC18 *0.1u_16V_Y5V_04 KC47 0.01u_50V_X7R_04 KC17 *0.01u_50V_X7R_04 0_04 0_04 B ߨփᐋ KC19 C ᐗ೸৬ᤜቃఎ KDLMX1- KJ_RJ1 KDLMX2+ *W CM2012F2S-161T03 KR40 0_04 KR39 0_04 KL3 KDLMX31 KDLMX3+ *W CM2012F2S-161T03 KR42 0_04 KR41 0_04 KL4 KDLMX4- 15 18 21 24 KC43 LDO Mode KSD_D3/MS_D3_R KDLMX1+ *W CM2012F2S-161T03 KR46 0_04 KR45 0_04 KL5 KDLMX2- KDLMX1+ KDLMX1KDLMX2+ KDLMX2- KDLMX3+ KDLMX3KDLMX4+ KDLMX4- DA+ DADB+ DB- 1KR *0_04 4KR *0_04 2KR *0_04 5KR *0_04 3KR *0_04 6KR *0_04 87,88 88 K3.3V K3.3VS KCHASSIS_GND DC+ DCDD+ DDP JS-08SO1B P/N = 6-21-B40C0-008 PCB Footprint = PJS-08SL3B KNMCT_4 KNMCT_3 KNMCT_2 KNMCT_1 KR5 KR6 KR7 KR8 75_1%_04 75_1%_04 75_1%_04 75_1%_04 KNMCT_R D ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ KC46 10P_2KV_NPO_12 Title D02A 2/18 ADD KR9 *0_04 KGND 6/2 EMI Size A3 [86] P650RS USB BOARD_K 1/3 Document Number KCHASSIS_GND Date: GND1 GND2 shield shield KDLMX4+ *W CM2012F2S-161T03 NS892402 KGND KR32 KSD_CLK/MS_D0_R 0_04 KR51 Near Cardreader CONN KL2 D 0_04 KSD_D3/MS_D3 KC35 KR29 KR28 KL1 KC20 KR27 KSD_CLK/MS_D0 KR49 Sheet 86 of 91 P650RS USB Board 1/3 KGND 0_06 KGND KVDD3 KSD_D2/MS_CLK_R ૻ೏ SD Card Remove Fall time less than ms when SD card remove 0.1u_16V_Y5V_04 Pin#27 VDD3 meet rising time >1ms KSD_D1_R 0_04 KVCC_CARD KEVDD10 KVDD10 0_04 KGND KGND KGND KR54 KR47 KSD_D2/MS_CLK KR53 KVCC_CARD KC14 KGND KSD_D0/MS_D1_R KSD_D1 KGND KVDD33/18 KC16 *2.2u_6.3V_X5R_04 Pin#27 0_04 *28mil_short-p Near Cardreader CONN KR52 KC9 KGND KVDD33/18 KSD_CMD/MS_D2_R KR48 *0_04 PULL LOW: LDO Mode KVDD10 KC10 KGND 0_04 KSD_D0/MS_D1 KAVDD33 PULL HIGH: SWR Mode 0.1u_16V_Y5V_04 KGND 88 88 88 KC48 KC8 KSD_CMD/MS_D2 KR50 ৱEMIᒔ ᒔᎁ‫ݙ‬,‫ޏ‬ ‫ޏ‬SHORT Close to chip KR35 KCARD_3V3 KGND *10K_04 KBUF_PLT_RST# KC42 KC44 GND1 GND2 KR43 KGND 13 14 15 16 17 18 19 20 21 22 23 24 RTL8411B KREGOUT KD3V3 KENSW REG GND1 GND2 SD_WP SD_C/D COM *5p_50V_NPO_04 0.1u_16V_Y5V_04 PIN12 KREGOUT SD_DATA1 CS1R-201-H-N PCB Footprint = CS1R-201-H-N 6-21-A4400-112 KGND K3.3VS KR36 15K_04 capacitors must be close to pin side CARD_3V3 SD_D1 SD_D0/MS_D1 SD_CLK/MS_D0 SD_CMD/MS_D2 SD_D3/MS_D3 SD_D2/MS_CLK VDDTX HSIP HSIN REFCLK_P REFCLK_N KVDD10 10 11 12 K3.3VS KC41 0.1u_16V_Y5V_04 KGND KLAN_MDIP0 KLAN_MDIN0 1K_04 WP CD COM Rev D02 6-71-P65S3-D02 Friday, June 03, 2016 Sheet 86 of 91 P650RS USB Board 1/3 B - 87 B.Schematic Diagrams HV_GIGA RSET LV_CEN CKXTAL2 CKXTAL1 MS_CD# SD_CD# LED0 LED_CR LANWAKEB LED1/GPO LED2 KGND BIOS pulls high or low to GPO pin, Pkease refer to LAN/PHY Disable Application Note A SD_VSS1 P4 KVCC_CARD ၦขᒔᎁ৵ሽॴ,‫ޏ‬ ‫ޏ‬SHORTሿ ሿٙ TO SB PCH WAKE# KLAN_W AKEUP# 10p_50V_NPO_04 SD_DATA2 *0402_short FOR S5 WAKE UP ON LAN T124 KAVDD33 KGND KVDD10 KXTAL1 KSD_CD# KEECS KLED_CR KGND (>20mil) KGND KXTAL2 KXTAL1 A 1M_04 IN SOCKET ࣨՂStandard PUSH PUSH CARD READER KVDD10 0_06 KGND KXTAL2 KR25 Switching Regulator close to PIN48 Schematic Diagrams P650RS USB Board 2/3 USB3.0 re-driver USB3.0 PORT4 K3.3V KR16 KR14 KR18 *0_04 KR12 2K_1%_04 (MB‫׳‬ ‫׳‬Հ) *4.7K_04 *4.7K_04 KUSBVCC3.0_6 KU2 D K5V VIN VOUT 100 MIL D KC50 0.1u_10V_X7R_04 KC33 19 Sheet 87 of 91 P650RS USB Board 2/3 GND DE_A SW_A VCC EQ_A RX+ TYPE_IND# CHIP_EN# RX2RX2+ TX2TX2+ K_SCK_P4 KC21 KR10 *4.7K_04 KC22 0.1u_10V_X7R_04 11 KC23 0.1u_10V_X7R_04 12 KC24 0.1u_10V_X7R_04 0.1u_16V_Y5V_04 88 88 KUSB3_TXP4 KDD_ON# KR22 KGND *0402_short 88 KGND KC28 KUSB3_RXN4 88 KUSB3_RXP4 88 ASM1464 PCB Footprint = QFN24-4X4MM K3.3V KR11 KR15 KR17 *4.7K_04 *4.7K_04 *4.7K_04 22u_6.3V_X5R_08 KTXN4_J KUSB_PN4_J KC26 KC29 KC25 KUSB_PP4_J KRXP4_J 0.01u_16V_X7R_04 0.1u_10V_X7R_04 1u_6.3V_X5R_04 KRXN4_J SSTX+ SHIELD VBUS SSTXDGND D+ SSRX+ GND_D SSRX- SHIELD *0_04 USB3.0 Max Trace length Follow Design Guide KGND KGND KGND 88 KUSB_PN4 88 KUSB_PP4 KL6 *W CM2012F2S-161T03-short KUSB_PN4_CON10 KUSB_PP4_CON KGND D02 KTXP4 KTXN4 KRXP4 KRXN4 KGND M:6-20-B4Z10-009 S:6-20-B4Z40-109 KUSB_PN4_J KUSB_PP4_J KGND KTXP4_J KTXN4_J KGND KRXP4_J KRXN4_J DT1140-04LP-7 B Layoutழ ழ SIMհ հࢬ‫ॾڶ‬ᇆᒵ‫ף‬ษ(10mil) ࢬ‫ॾڶ‬ᇆᒵհၴ‫ף‬GND SIM hold ‫᧯ء‬؄ࡌ‫ף‬GND໮ ໮៥ 4.SIM CONN ᔾ२ MINI CARD CONN SIMհ հ‫ޢ‬ԫॾᇆᒵऱLayoutၒ ၒᒵᏁ՛࣍10ֆ ֆ։ SIM CONN KR1 C GND2 DT1140-04LP-7 KD1 3/18 ආ᝜৬ᤜࠌ‫ش‬20KV ESD 10 D02 B GND1 KGND UB251H-009G11M P/N = 6-20-B4Z10-009 PCB Footprint = 317AH09FZTS4T4CX KD3 ࠷௣co-lay, ‫ྤڂ‬layout़ ़ၴ KGND KJ_USB3_1 KTXP4_J ‫࠷ڂ‬௣co-lay, ‫࠷ޡٵ‬௣ሽ୲ K3.3V 22u_6.3V_X5R_08 KC27 KUSBVCC3.0_6 CLOSE TO CONNECTOR *0_04 KR19 OC# 2A/90mohm KUSB3_TXN4 C KR13 EN# uP7549UMA5-20 PCB Footprint = M-SOT23-5 KGND 0.1u_10V_X7R_04 10 KGND From PCH Standard-A KRXP4 TX1+ 21 VCC 20 RX1- 13 KC32 GND KGND SMB_SCK Reserverd KC31 0.1u_10V_X7R_04 To Conn SW_B 0.1u_10V_X7R_04 KRXN4 TX1- DE_B KTXP4 GND SMB_DATA 14 22 15 23 16 KC30 18 *4.7K_04 KJ_SIM1 KDETECT_SW KR2 KDETECT_SW 0_04 (TOP VIEW) KR4 *0402_short KUIM_CLK KUIM_RST 88 88 KUIM_CLK KUIM_RST 88 KUIM_PW R KUIM_CLK_R SW1 C4 C3 C2 C1 KUIM_PW R DETECT_SW UIM_DATA UIM_CLK UIM_RST UIM_PWR UIM_MCMD UIM_I/O UIM_VPP UIM_GND C8 C7 C6 C5 KR3 *0402_short KUIM_DATA_R KUIM_DATA KUIM_VPP KUIM_DATA 88 GNG GND GND GND 88 MSMPS-SN2(01T) KC6 *22p_50V_NPO_04 GND1 GND2 GND3 GND4 B.Schematic Diagrams K_SDA_P4 EQ_B *4.7K_04 0.1u_10V_X7R_04 GND KR20 KTXN4 17 KGND EN_RXD KU1 25 24 KGND KC34 10u_6.3V_X5R_06 K5V 88 K3.3V 88 K3.3VS 86,88 A KGND PCB Footprint = msmps-s02-xxr P/N = 6-86-2B010-004 KGND A MSMPS-SN2(01T) ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size A3 Date: B - 88 P650RS USB Board 2/3 [87] P650RS USB BOARD_K 2/3 Document Number P650RS Rev D02 6-71-P65S3-D02 Thursday, May 26, 2016 Sheet 87 of 91 Schematic Diagrams P650RS USB Board 3/3 (ܶ ܶUSB3.0x2, PHONE JACK, SIM) KC3 KJ_MB1 KC1 KC2 2.2u_6.3V_X5R_04 0.1u_16V_Y5V_04 KGND K3.3V KGND K3.3VS KC4 KC5 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 KVDD3 KGND KGND C K3.3V 87 KUIM_PWR 87 KUIM_DATA 87 KUIM_CLK 87 KUIM_RST K3.3VS 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 KUSB_PN4 KUSB_PP4 87 87 KUSB3_TXN4 KUSB3_TXP4 KUSB3_RXN4 KUSB3_RXP4 D 87 87 87 87 KCLK_PCIE_GLAN# 86 KCLK_PCIE_GLAN 86 KPCIE_TXN5_GLAN KPCIE_TXP5_GLAN KPCIE_RXN5_GLAN KPCIE_RXP5_GLAN 86 86 86 86 C KDETECT_SW 87 KLAN_CLKREQ# 86 KPCIE_WAKE# 86 KLAN_WAKEUP# 86 KBUF_PLT_RST# 86 KDD_ON# 87 KH1 *H7_0B7_5D2_2 Sheet 88 of 91 P650RS USB Board 3/3 KCLK_PCIE_SD40 KCLK_PCIE_SD40# KPCIE_RXN6_SD40 KPCIE_RXP6_SD40 KPCIE_TXN6_SD40 KPCIE_TXP6_SD40 reserved SD40 KSD40_CLKREQ# 51049-08041-001 PCB Footprint = 51049-0804X KGND 6-21-C1400-240 KGND B KH2 *H7_0B7_5D2_2 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 B 2/18 del kh16 5/10 ᖲዌ ࠷௣ᝅ֞KH4 D02A KGND KGND KH7 *H7_5D2_8 KH8 *H7_5D2_8 Del KH9 5/10 ᖲዌ ֊ೈࣨ‫ޗ‬ D02A KR21 A KH3 *H4_2D2_2 Del KH10 5/10 ᖲዌ ֊ೈࣨ‫ޗ‬ KH5 KH6 *H4_2D2_2 *H4_2D2_2 K5V 87 K3.3V 87 K3.3VS 86 D02A *0_04 KGND KGND ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ KGND KCHASSIS_GND Title Size A4 Date: A [88] P650RS USB BOARD_K 3/3 Document Number P650RS Rev D02 6-71-P65S3-D02 Thursday, May 26, 2016 Sheet 88 of 91 P650RS USB Board 3/3 B - 89 B.Schematic Diagrams 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 K5V 0.1u_16V_Y5V_04 KGND LAN BOARD KVDD3 D Schematic Diagrams P670RS LED Board YD1 YLED_ACIN YJ_MB NC2 YD1_1 330_04 UHY YLED_PWR YR9 YD1_3 330_04 Green UYG RY-SP195UHYUYG4 D AC IN/POWER ON LED Y_GND YD2 Y_GND YLED_BAT_CHG Y_3.3VS YR7 YD8_1 330_04 Oragne FP225H-012S10M PCB Footprint = fp225-012g UHY YLED_BAT_FULL YR1 YD8_3 330_04 Green UYG RY-SP195UHYUYG4 BAT CHARGE/FULL LED Y_GND Y_3.3VS C C YR15 YR12 YR6 220_04 220_04 220_04 220_04 YD5 YD3 HDD RY-SP190YG34-5M YD4 LED RY-SP190YG34-5M AIRPLANE LED A NUM LOCK LED C RY-SP190YG34-5M C RY-SP190YG34-5M CAPS LOCK LED dGPU LED YD8 RY-SP190YG34-5M RY-SP190YG34-5M C YD6 C A SCROLL LOCK LED C YD7 A YR13 220_04 A YR14 220_04 A YR11 A Sheet 89 of 91 P670RS LED Board C YLED_CAP# YLED_NUM# YSATA_LED# *0_04 C YR5 YLED_SCROLL# Y_WLAN_AIRPLANE# B YQ1 DTC114EUA E 4/29 follow common design Y_GND YH1 YH2 *H2_5B4_0D2_5 *H2_3B4_0D2_3 YLED_PWR YLED_ACIN YH4 A 1 1 *MTH2_3B7_0D2_3 YD10 YD11 YD12 YD13 Y_GND Y_GND Y_GND Y_GND Y_GND 1YR *0_04 4YR *0_04 2YR *0_04 5YR *0_04 *0_04 6YR *0_04 Title Size A4 Date: Y_GND *MTH2_3B7_0D2_3 Y_GND ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ *V15AVLC0402 *V15AVLC0402 *V15AVLC0402 3YR 5 *V15AVLC0402 ᔾLEDጤ ጤឭ࣋ YLED_BAT_CHG D02A YH3 YLED_BAT_FULL B - 90 P670RS LED Board B B Y_dGPU_LED B.Schematic Diagrams YLED_ACIN YLED_PWR YLED_BAT_CHG YLED_BAT_FULL YLED_NUM# YLED_CAP# YLED_SCROLL# Y_WLAN_AIRPLANE# Y_dGPU_LED YSATA_LED# 12 11 10 NC1 D YR4 Oragne A [89] P670RS LED BOARD_Y Document Number P650RS Rev D02 6-71-P67S4-D02 Thursday, May 26, 2016 Sheet 89 of 91 Schematic Diagrams P670RS USB Board 1/2 LAN (RTL8411B) Crystal ‫شޏ‬5032 SIZE ZRSET ZR26 2.49K_1%_04 ZR24 *1K_04 ZR27 10K_04 (>20mil) ZGND ZAVDD33 ZXTAL2 ZXTAL1 ZC30 10p_50V_NPO_04 E_PAD ZPCIE_W AKE# 91 TO SB PCH WAKE# ZLAN_W AKEUP# 91 ZAVDD33 Z3.3VS B MDIP0 MDIN0 AVDD10 MDIP1 MDIN1 MDIP2 MDIN2 AVDD10 MDIP3 MDIN3 HV_GIGA VDD3 QFN48 ZC1 0.1u_16V_Y5V_04 PIN12 ZSD_D1 ZSD_D0/MS_D1 ZSD_CLK/MS_D0 ZSD_CMD/MS_D2 ZSD_D3/MS_D3 ZSD_D2/MS_CLK ZCARD_3V3 ZVDD10 ZVDD10 ZISOLATEB ZPERSTB ZR14 ZCLKREQB ZMS_BS/SD_W P# ZRTL8411B_HSON ZRTL8411B_HSOP 1K_04 Z3.3VS Z3.3VS Remind that R109 using the main power (S0 power) ZC7 ZC8 ZC5 0.1u_16V_Y5V_04 PIN8 0.1u_16V_Y5V_04 PIN32 0.1u_16V_Y5V_04 PIN46 ZVDD10 ZAVDD33 ZBUF_PLT_RST# 91 ZR11 0_04 ZLAN_CLKREQ# 91 LAN_CLKREQ#‫ڕ‬ ‫ڕ‬լࠌ‫ױش‬ឰၲ,࣍ ࣍PCHጤ ጤऴ൷PULL DOWN ZC21 ZC20 0.1u_10V_X7R_04 0.1u_10V_X7R_04 ZPCIE_RXN5_GLAN ZPCIE_RXP5_GLAN 91 91 ZSD_CMD/MS_D2 ZR45 0_04 ZSD_CMD/MS_D2_R ZSD_D0/MS_D1 ZR42 0_04 ZSD_D0/MS_D1_R ZSD_D1 ZR43 0_04 ZSD_D1_R ZSD_D2/MS_CLK ZR47 0_04 ZSD_D2/MS_CLK_R ZVDD33/18 ZVDD33/18 ZC23 ZC22 *4.7u_6.3V_X5R_06 Pin#27 ZGND ZGND ZSD_CLK/MS_D0 ZR44 0_04 ZSD_D3/MS_D3 0_04 ZENSW REG ZR19 GIGA LAN ZCLK_PCIE_GLAN# ZCLK_PCIE_GLAN 91 91 ZPCIE_TXN5_GLAN ZPCIE_TXP5_GLAN 91 91 ZR20 *28mil_short-p ZC2 ZC3 0.1u_16V_Y5V_04 PIN20 1u_6.3V_X5R_04 PIN20 ZGND Sheet 90 of 91 P670RS USB Board 1/2 ZGND ZCARD_3V3 Near Cardreader CONN 40 mil 0.2R_5%_06 ZC39 ZC42 ZC40 0.1u_16V_Y5V_04 4.7u_6.3V_X5R_06 0.1u_16V_Y5V_04 PIN13 ZVCC_CARD SD Card Remove Fall time less than ms when SD card remove ZGND ZLAN_MDIN0 ZLAN_MDIP0 ZLAN_MDIN1 ZLAN_MDIP1 12 11 ZLAN_MDIN2 ZLAN_MDIP2 ZLAN_MDIN3 ZLAN_MDIP3 ZAVDD33 10 *28mil_short-p D ZC4 ZC6 ZC11 0.1u_16V_Y5V_04 PIN11 0.1u_16V_Y5V_04 PIN32 0.1u_16V_Y5V_04 PIN48 ZGND ZGND ZD3V3 60 mil ZR23 ZC41 ZGND ZVCC_CARD C ZGND TD4TD4+ TD3TD3+ MX4MX4+ MX3MX3+ TD2TD2+ TD1TD1+ MX2MX2+ MX1MX1+ TCT4 TCT3 TCT2 TCT1 MCT4 MCT3 MCT2 MCT1 ZLMX1ZLMX1+ ZLMX2ZLMX2+ 19 20 22 23 ZLMX3ZLMX3+ ZLMX4ZLMX4+ ZDLMX3+ *W CM2012F2S-161T03 ZR6 0_04 ZR7 0_04 ZL2 ZDLMX4- ZJ_RJ1 ZDLMX1+ ZDLMX1ZDLMX2+ ZDLMX2- ZNMCT_4 ZNMCT_3 ZNMCT_2 ZNMCT_1 ZR28 ZR15 ZR9 ZR5 75_1%_04 75_1%_04 75_1%_04 75_1%_04 ZDLMX3+ ZDLMX3- ZDLMX4+ ZDLMX4- DA+ DADB+ DB- 0.1u_16V_Y5V_04 ZC16 *0.1u_16V_Y5V_04 ZC32 0.01u_50V_X7R_04 ZNMCT_R ZC14 ZJ_RJ1 Medionႊ‫ޏ‬റ‫ش‬ற PJS-08KABLXB 6-21-B40D0-008 ZC19 *0.01u_50V_X7R_04 91 ZVDD3 91 Z3.3VS 1ZR *0_04 4ZR *0_04 2ZR *0_04 5ZR *0_04 3ZR *0_04 6ZR *0_04 D 10P_2KV_NPO_12 ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ 6/2 EMI Title ZR39 Z_CHASSIS_GND DC+ DCDD+ DD- D02A ZC12 GND1 GND2 shield shield P JS-08SO1B P/N = 6-21-B40C0-008 PCB Footprint = PJS-08SL3B medion ZDLMX4+ *W CM2012F2S-161T03 ZL4 Medionႊ‫ޏ‬റ‫ش‬ற GST5009 LF 0.01u_16V_X7R_04 6-19-41001-239 LDO Mode ZDLMX1- ZDLMX2+ *W CM2012F2S-161T03 ZR10 0_04 ZR12 0_04 ZL3 ZDLMX3- 15 18 21 24 NS892402 ZC28 medion 40 mil *28mil_short-p 13 14 16 17 0_04 0_04 ZDLMX1+ *W CM2012F2S-161T03 ZR18 0_04 ZR22 0_04 ZL5 ZDLMX2- ZL4 ZR2 ߨփᐋ Near Cardreader CONN 0_06 ZR49 ZGND ZSD_D3/MS_D3_R Close to chip 0_04 PULL LOW: LDO Mode 0.1u_16V_Y5V_04 Pin#27 ZGND ZVDD3 GND1 GND2 ZSD_CLK/MS_D0_R *0_04 ZR31 ZR34 ZL6 VDD3 meet rising time >1ms GND1 GND2 SD_WP SD_C/D COM ZGND ZGND ZR1 ZR46 ৱEMIᒔ ᒔᎁ‫ݙ‬,‫ޏ‬ ‫ޏ‬SHORT ZAVDD33 PULL HIGH: SWR Mode ZEVDD10 ZVDD10 SD_DATA1 B ZGND ZGND SD_DATA0 CS1R-201-H-N PCB Footprint = CS1R-201-H-N 6-21-A4400-112 ZGND ZGND *0402_short C ZGND SD_VSS2 WP CD COM *10K_04 ZR48 0.1u_16V_Y5V_04 PIN3 P8 ZMS_BS/SD_W P# ZSD_CD# ZVDD10 ZC9 ZSD_D1_R ZR13 ZREGOUT ZD3V3 ZVDD33/18 SD_CLK capacitors must be close to pin side 13 14 15 16 17 18 19 20 21 22 23 24 RTL8411B ZENSW REG SD_VDD P6 P7 A SD_VSS1 P5 ZSD_D0/MS_D1_R ZR17 15K_04 ZREGOUT SD_CMD ZGND ZC10 0.1u_16V_Y5V_04 36 35 34 33 32 31 30 29 28 27 26 25 SD_DATA3 *5p_50V_NPO_04 ZGND ZVDD10 ZSD_CLK/MS_D0_R ZC38 ZR16 REG_OUT VDDREG ENSWREG VDD1 VD33 ISOLATEBPIN PERSTBPIN CLKREQBPIN MS_BS/SD_WP# DV33_18 HSON HSOP SD_DATA2 P4 BIOS pulls high or low to GPO pin, Pkease refer to LAN/PHY Disable Application Note ZEVDD10 ZLAN_MDIP3 ZLAN_MDIN3 P2 ZVCC_CARD ZT2 ZT1 CARD_3V3 SD_D1 SD_D0/MS_D1 SD_CLK/MS_D0 SD_CMD/MS_D2 SD_D3/MS_D3 SD_D2/MS_CLK VDDTX HSIP HSIN REFCLK_P REFCLK_N ZLAN_MDIP1 ZLAN_MDIN1 ZLAN_MDIP2 ZLAN_MDIN2 ZVDD10 10 11 12 ZSD_CMD/MS_D2_R P3 ၦขᒔᎁ৵ሽॴ,‫ޏ‬ ‫ޏ‬SHORTሿ ሿٙ ZGND ZLAN_MDIP0 ZLAN_MDIN0 P1 LDO Modeழ ழ: La,Ca,Cb լՂٙ,RaՂ Ղٙ TO EC8587 PIN123 LAN_WAKEUP# ZLED1/GPO ZLED2 P9 ZSD_D3/MS_D3_R *0_04 Z_CHASSIS_GND [90] P670RS USB BOARD_Z 1/2 ZGND Size A3 ZGND ᐗ೸৬ᤜቃఎ Date: Document Number Rev D02A 6-71-P67S3-D02A Friday, June 03, 2016 Sheet 90 of 91 P670RS USB Board 1/2 B - 91 B.Schematic Diagrams ZGND ZVDD10 ZJ_CARD1 ZSD_D2/MS_CLK_R 0.1u_16V_Y5V_04 ZU2 49 A RB751S-40C2 48 47 46 45 44 43 42 41 40 39 38 37 ZGND IN SOCKET ࣨՂStandard PUSH PUSH CARD READER ZVDD10 ZVDD10 ZAVDD33 ZLAN_W AKEUP# 10p_50V_NPO_04 3/29 ଥ‫إ‬PDA BUG C ZD3 HV_GIGA RSET LV_CEN CKXTAL2 CKXTAL1 MS_CD# SD_CD# LED0 LED_CR LANWAKEB LED1/GPO LED2 ZGND ZT3 ZX1 C286-001_25MHZ PCB Footprint = FSX3M ZC31 0_06 FOR S5 WAKE UP ON LAN ZSD_CD# ZEECS ZLED_CR A ZGND ZR3 ZGND ZXTAL1 ZVDD10 (>20mil) ZREGOUT ZXTAL2 1M_04 ZGND meet realtek Freq tolerance 50ppm ZR25 Switching Regulator close to PIN48 Ra Schematic Diagrams P670RS USB Board 2/2 USB3.0 re-driver USB3.0 PORT4 Z3.3V ZR35 ZR38 ZR30 *0_04 ZR40 2K_1%_04 (MB‫׳‬ ‫׳‬Ղ) *4.7K_04 *4.7K_04 ZUSBVCC3.0_6 ZU1 VOUT 100 MIL ZC27 19 0.1u_10V_X7R_04 GND DE_A SW_A RX+ TYPE_IND# CHIP_EN# RX2RX2+ 18 ZRXP4 TX1+ TX2TX2+ Z_SCK_P4 ZC34 0.1u_10V_X7R_04 ZUSB3_TXN4 ZC35 0.1u_10V_X7R_04 ZUSB3_TXP4 10 ZR41 *4.7K_04 ZGND 91 ZC36 ZC37 uP7549UMA5-20 PCB Footprint = M-SOT23-5 *0402_short 0.1u_10V_X7R_04 ZUSB3_RXN4 0.1u_10V_X7R_04 ZUSB3_RXP4 ZGND 2A/90mohm ZC18 C *0_04 ZR29 *0_04 22u_6.3V_X5R_08 ZC17 ZUSBVCC3.0_6 22u_6.3V_X5R_08 ZGND ZJ_USB3_1 ZTXP4_J ASM1464 PCB Footprint = QFN24-4X4MM Z3.3V Z3.3V ZTXN4_J ZUSB_PN4_J ZUSB_PP4_J ZRXP4_J ZR36 D 0.1u_16V_Y5V_04 From PCH ZGND 11 12 ZR4 ZDD_ON# OC# ZR37 ZR33 ZR32 *4.7K_04 *4.7K_04 *4.7K_04 ZC29 ZC44 ZC33 0.01u_16V_X7R_04 0.1u_10V_X7R_04 1u_6.3V_X5R_04 ZRXN4_J USB3.0 Max Trace length Follow Design Guide ZGND ZGND ZD1 CLOSE TO CONNECTOR ZUSB_PN4 ZL1 ZUSB_PP4 ZUSB_PN4_CON ZUSB_PP4_CON ZGND *W CM2012F2S-161T03-short 2/22 ZL1_Pin1/4 swap 10 D02 ZUSB_PN4_J ZUSB_PP4_J ZTXP4 ZTXN4 ZGND DT1140-04LP-7 ZRXP4 ZRXN4 SSTX+ SHIELD VBUS SSTXDGND D+ SSRX+ GND_D SSRX- SHIELD GND1 GND2 2/3 ME‫شޏ‬ற UB251H-009G11M P/N = 6-20-B4Z10-009 PCB Footprint = 317AH09FZTS4T4CX M:6-20-B4Z10-009 S:6-20-B4Z40-109 ZD2 ZGND ࠷௣co-lay, ‫ྤڂ‬layout़ ़ၴ Standard-A 20 21 VCC ZC26 EN# ZGND RX1- 13 0.1u_10V_X7R_04 EN_RXD ZRXN4 To Conn GND ZGND SMB_SCK Reserverd 22 SW_B ZC25 DE_B 0.1u_10V_X7R_04 TX1- 14 ZTXP4 GND SMB_DATA 15 23 16 ZC24 EQ_A 25 24 Z_SDA_P4 EQ_B *4.7K_04 0.1u_10V_X7R_04 GND ZR21 ZTXN4 17 ZGND VCC ZU3 ZC13 10u_6.3V_X5R_06 ZGND B.Schematic Diagrams VIN ZC15 D Sheet 91 of 91 P670RS USB Board 2/2 Z5V ZGND 10 D02 3/18 ආ᝜৬ᤜࠌ‫ش‬20KV ESD C ZGND ZTXP4_J ZTXN4_J ZGND ZRXP4_J ZRXN4_J DT1140-04LP-7 LAN BOARD (ܶ ܶUSB3.0x2, PHONE JACK, SIM) ZH3 B ZC47 ZVDD3 ZC48 10u_6.3V_X5R_06 0.1u_16V_Y5V_04 ZC46 ZGND ZGND 0.1u_16V_Y5V_04 ZGND Z3.3V ZC43 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 ZGND A Z3.3VS ZC45 ZVDD3 Z3.3V ZGND Z3.3VS 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 ZH4 ZJ_MB1 Z5V 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 51049-08041-001 ZGND PCB Footprint = 51049-0804X ZGND ZR8 *0_04 *MTH8_0D2_8 *MTH8_0D2_8 B - 92 P670RS USB Board 2/2 *MTH10_0D2_8 4 *MTH5_0D2_3 B *MTH5_0D2_3 ZGND USB3.0_XX3 ZH2 *H5_5D2_5 ZH5 *H5_0D2_5 ZCLK_PCIE_GLAN# 90 ZCLK_PCIE_GLAN 90 ZPCIE_TXN5_GLAN ZPCIE_TXP5_GLAN ZPCIE_RXN5_GLAN ZPCIE_RXP5_GLAN 90 90 90 90 ZGND ZLAN_CLKREQ# 90 ZPCIE_W AKE# 90 ZLAN_W AKEUP# 90 ZBUF_PLT_RST# 90 ZDD_ON# 91 ZCLK_PCIE_SD40 ZCLK_PCIE_SD40# ZVDD3 90 Z3.3VS 90 A ZPCIE_RXN6_SD40 ZPCIE_RXP6_SD40 ZPCIE_TXN6_SD40 ZPCIE_TXP6_SD40 ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title ZSD40_CLKREQ# Size A3 reserved SD40 Date: ZH6 Z_CHASSIS_GND DEL ZH7 ZUSB3_TXN4 ZUSB3_TXP4 ZUSB3_RXN4 ZUSB3_RXP4 ZH1 ZUSB_PN4 ZUSB_PP4 [91] P670RS USB BOARD_Z 2/2 Document Number P650RS Rev D02A 6-71-P67S3-D02A Thursday, May 26, 2016 Sheet 91 of 91 BIOS Update Appendix C:Updating the FLASH ROM BIOS To update the FLASH ROM BIOS, you must: • • • • • • • Download the BIOS Go to www.clevo.com.tw and point to E-Services and click E-Channel Use your user ID and password to access the appropriate download area (BIOS), and download the latest BIOS files (the BIOS file will be contained in a batch file that may be run directly once unzipped) for your computer model (see sidebar for important information on BIOS versions) Unzip the downloaded files to a bootable CD/DVD/ or USB Flash drive Insert a bootable CD/DVD/USB flash drive into the CD/DVD drive/USB port of the computer containing the downloaded files Use a tool such as Winzip or Winrar to unzip all the BIOS files and refresh tools to your bootable CD/DVD/USB flash drive (you may need to create a bootable CD/DVD with the files using a 3rd party software) BIOS Version Make sure you download the latest correct version of the BIOS appropriate for the computer model you are working on You should only download BIOS versions that are V1.0X.XX or higher as appropriate for your computer model Note that BIOS versions are not backward compatible and therefore you may not downgrade your BIOS to an older version after upgrading to a later version (e.g if you upgrade a BIOS to ver 1.01.05, you MAY NOT then go back and flash the BIOS to ver 1.01.04) Set the computer to boot from the external drive With the bootable CD/DVD/USB flash drive containing the BIOS files in your CD/DVD drive/USB port, restart the computer and press F2 (in most cases) to enter the BIOS Use the arrow keys to highlight the Boot menu Use the “+” and “-” keys to move boot devices up and down the priority order Make sure that the CD/DVD drive/USB flash drive is set first in the boot priority of the BIOS Press F4 to save any changes you have made and exit the BIOS to restart the computer C - C:BIOS Update Download the BIOS update from the web site Unzip the files onto a bootable CD/DVD/USB Flash Drive Reboot your computer from an external CD/DVD/USB Flash Drive Use the flash tools to update the flash BIOS using the commands indicated below Restart the computer booting from the HDD and press F2 at startup enter the BIOS Load setup defaults from the BIOS and save the default settings and exit the BIOS to restart the computer After rebooting the computer you may restart the computer again and make any required changes to the default BIOS settings  BIOS Update Use the flash tools to update the BIOS Make sure you are not loading any memory management programs such as HIMEM by holding the F8 key as you see the message “EFI Shell” You will then be prompted to give “Y” or “N” responses to the programs being loaded by EFI Shell Choose “N” for any memory management programs You should now see DISK fsX:\> (X is the designated drive number for the CD/DVD drive/USB flash drive) Type the following command: C:BIOS Update fsX:\> Flash.nsh The utility will then proceed to flash the BIOS You should then be prompted to press any key to restart the system or turn the power off, and then on again but make sure you remove the CD/DVD/USB flash drive from the CD/DVD drive/USB port before the computer restarts Restart the computer (booting from the HDD) With the CD/DVD/USB flash drive removed from the CD/DVD drive/USB port the computer should restart from the HDD Press F2 as the computer restarts to enter the BIOS Use the arrow keys to highlight the Exit menu Select Load Setup Defaults (or press F3) and select “Yes” to confirm the selection Press F4 to save any changes you have made and exit the BIOS to restart the computer Your computer is now running normally with the updated BIOS You may now enter the BIOS and make any changes you require to the default settings C-2 ...Preface Notebook Computer P650RS(- G) / P651RS( -G) Service Manual Preface I Preface Notice The company reserves the right to revise this publication... XII Introduction Chapter 1: Introduction Overview This manual covers the information you need to service or upgrade the P650RS(- G) / P651RS( -G) series notebook computer Information about operating... programs) If you have questions about those programs, you should consult those manuals 1.Introduction The P650RS(- G) / P651RS( -G) series notebook is designed to be upgradeable See Disassembly on page