Clevo P650SE service manual

P650SE / P651SE Downloaded from www.Manualslib.com manuals search engine Downloaded from www.Manualslib.com manuals search engine Preface Notebook Computer P650SE / P651SE Service Manual Preface I Downloaded from www.Manualslib.com manuals search engine Preface Notice The company reserves the right to revise this publication or to change its contents without notice Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes Preface Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer Version 1.0 November 2014 Trademarks Intel and Intel Core are trademarks of Intel Corporation Windows® is a registered trademark of Microsoft Corporation Other brand and product names are trademarks and /or registered trademarks of their respective companies II Downloaded from www.Manualslib.com manuals search engine Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers It is organized to allow you to look up basic information for servicing and/or upgrading components of the P650SE / P651SE series notebook PC The following information is included: Chapter 1, Introduction, provides general information about the location of system elements and their specifications Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade elements of the system Preface Appendix A, Part Lists Appendix B, Schematic Diagrams Appendix C, Updating the FLASH ROM BIOS III Downloaded from www.Manualslib.com manuals search engine Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to persons when using any electrical equipment: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool Avoid using a telephone (other than a cordless type) during an electrical storm There may be a remote risk of electrical shock from lightning Do not use the telephone to report a gas leak in the vicinity of the leak Use only the power cord and batteries indicated in this manual Do not dispose of batteries in a fire They may explode Check with local codes for possible special disposal instructions This product is intended to be supplied by a Listed Power Unit as follows: Preface • AC Input of 100 - 240V, 50 - 60Hz, DC Output of 19V, 9.5A (180 Watts) minimum AC/DC Adapter FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation IV Downloaded from www.Manualslib.com manuals search engine Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged To prevent this, follow these suggestions: Don’t drop it, or expose it to shock If the computer falls, the case and the components could be damaged Do not expose the computer to any shock or vibration Do not place anything heavy on the computer Keep it dry, and don’t overheat it Keep the computer and power supply away from any kind of heating element This is an electrical appliance If water or any other liquid gets into it, the computer could be badly damaged Do not leave it in a place where foreign matter or moisture may affect the system Don’t use or store the computer in a humid environment Do not place the computer on any surface which will block the vents Preface Do not expose it to excessive heat or direct sunlight Do not place it on an unstable surface Follow the proper working procedures for the computer Shut the computer down properly and don’t forget to save your work Remember to periodically save your data as data may be lost if the battery is depleted Do not turn off the power until you properly shut down all programs Do not turn off any peripheral devices when the computer is on Do not disassemble the computer by yourself Perform routine maintenance on your computer V Downloaded from www.Manualslib.com manuals search engine Preface Avoid interference Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields These can hinder proper performance and damage your data Take care when using peripheral devices Use only approved brands of peripherals Unplug the power cord before attaching peripheral devices Preface Power Safety The computer has specific power requirements:  • • Power Safety Warning • Before you undertake any upgrade procedures, make sure that you have turned off the power, and disconnected all peripherals and cables (including telephone lines and power cord) It is advisable to also remove your battery in order to prevent accidentally turning the machine on • • • Only use a power adapter approved for use with this computer Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply If you are unsure of your local power specifications, consult your service representative or local power company The power adapter may have either a 2-prong or a 3-prong grounded plug The third prong is an important safety feature; not defeat its purpose If you not have access to a compatible outlet, have a qualified electrician install one When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices Before cleaning the computer, make sure it is disconnected from any external power supplies VI Downloaded from www.Manualslib.com manuals search engine Do not plug in the power cord if you are wet Do not use the power cord if it is broken Do not place heavy objects on the power cord Preface Battery Precautions • Only use batteries designed for this computer The wrong battery type may explode, leak or damage the computer • Do not continue to use a battery that has been dropped, or that appears damaged (e.g bent or twisted) in any way Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire • Recharge the batteries using the notebook’s system Incorrect recharging may make the battery explode • Do not try to repair a battery pack Refer any battery pack repair or replacement to your service representative or qualified service personnel • Keep children away from, and promptly dispose of a damaged battery Always dispose of batteries carefully Batteries may explode or leak if exposed to fire, or improperly handled or discarded • Keep the battery away from metal appliances • Affix tape to the battery contacts before disposing of the battery • Do not touch the battery contacts with your hands or metal objects Battery Guidelines Preface The following can also apply to any backup batteries you may have • If you not use the battery for an extended period, then remove the battery from the computer for storage • Before removing the battery for storage charge it to 60% - 70% • Check stored batteries at least every months and charge them to 60% - 70%  Battery Disposal The product that you have purchased contains a rechargeable battery The battery is recyclable At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream Check with your local solid waste officials for details in your area for recycling options or proper disposal Caution Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Discard used battery according to the manufacturer’s instructions Battery Level Click the battery icon in the taskbar to see the current battery level and charge status A battery that drops below a level of 10% will not allow the computer to boot up Make sure that any battery that drops below 10% is recharged within one week VII Downloaded from www.Manualslib.com manuals search engine Preface Related Documents You may also need to consult the following manual for additional information: User’s Manual on CD/DVD This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup program It also describes the installation and operation of the utility programs provided with the notebook PC System Startup Remove all packing materials Place the computer on a stable surface Insert the battery and make sure it is locked in position Securely attach any peripherals you want to use with the computer (e.g keyboard and mouse) to their ports Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter Use one hand to raise the lid/LCD to a comfortable viewing angle (do not exceed 135 degrees); use the other hand (as illustrated in Figure 1) to support the base of the computer (Note: Never lift the computer by the lid/LCD) Press the power button to turn the computer “on” Preface 135° Figure Opening the Lid/LCD/ Computer with AC/DC Adapter Plugged-In  Shut Down Note that you should always shut your computer down by choosing the Shut down command in Windows (see below) This will help prevent hard disk or system problems Click the icon in the Start Screen and choose Shut down from the menu Or Right-click the Start button at the bottom of the Start Screen or the Desktop and choose Shut down or sign out > Shut down from the context menu VIII Downloaded from www.Manualslib.com manuals search engine Schematic Diagrams Audio Board AJ_SPDIF1 A_5VS AJ_MB1 AGND D ASIDE_R ASIDE_L AHEADPHONE-RC AHEADPHONE-LC B.Schematic Diagrams ASIDE_L ASIDE_R D03 10 11 12 13 14 15 ASPDIFO AJD_SENSEA AJD_SENSEB AMIC1-R AMIC1-L AHP_AUDG AL5 AL7 FCM1005KF-121T03 FCM1005KF-121T03 ASIDE_SENSE AC10 680p_50V_X7R_04 A_5VS AC2 680p_50V_X7R_04 A_AUDG A B C A_AUDG ASPDIFO AL1 FCM1005KF-121T03 AC7 AR10 *220_04 AGND 0.1u_16V_Y5V_04 180p_50V_NPO_04 AGND DRIVE IC AGND 87151-15051 A_AUDG P/N = 6-20-94K00-115 PCB Footprint = 87151-15-X5_L Sheet 61 of 72 Audio Board AJ_MIC1 AMIC_SENSE AMIC1-R AL2 FCM1005KF-121T03 AMIC1-L AL6 FCM1005KF-121T03 C AJD_SENSEA AR11 AR5 AR4 20K_1%_04 39.2K_1%_04 5.1K_1%_04 AMIC_SENSE AHP_SENSE ASIDE_SENSE AHEADPHONE-RC AR2 54.9_1%_04 AHEADPHONE-LC AR9 54.9_1%_04 AJD_SENSEB AC6 AC9 100p_50V_NPO_04 100p_50V_NPO_04 A_AUDG A_AUDG D03 8/11 2SJ-T351-018 PCB Footprint = 2SJ-T351-018-A P/N = 6-20-B2880-006 vendor P/N = 2SJ-T351-018 AJ_HP1 AHP_PLUG AR1 AL3 FCM1005KF-121T03 AL4 FCM1005KF-121T03 AC3 AC4 100p_50V_NPO_04 100p_50V_NPO_04 AR3 22K_04 22K_04 A_AUDG 4AR *0_04 2AR *0_04 5AR *0_04 3AR *0_04 6AR *0_04 A_AUDG AC12 0.1u_16V_Y5V_04 AC11 0.1u_16V_Y5V_04 AC5 0.1u_16V_Y5V_04 AC1 0.1u_16V_Y5V_04 AGND AH2 *H4_2D2_2 AH1 *H4_2D2_2 AH4 *H7_5D2_8 Downloaded from www.Manualslib.com manuals search engine ARc ARd AGND D03 8/11 2SJ-T351-018 PCB Footprint = 2SJ-T351-018-A P/N = 6-20-B2880-006 vendor P/N = 2SJ-T351-018 B AGND 0_04 ARb AR12 *0_04 ARb ARc, ARd SV3H612 0_04 NC NC SV3H615 NC 0_04 1K_04 AH3 *H7_5D2_8 AGND AR7 A_AUDG ARa A_AUDG ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Size A4 AGND B - 62 Audio Board ARa Title AR8 *1K_04 A_AUDG A_AUDG AR6 *1K_04 A_AUDG A_AUDG AHP_AUDG A A_AUDG B *0_04 C A_AUDG AHP_SENSE 1AR D TX 1.56 P/N = 6-20-B2820-005 PCB Footprint = TOJ-001ST-2-H4 VENDOR P/N = TOJ-0015STR2-2-H4-PA9T-J AC8 Date: A [61] P650SE AUDIO BOARD_A Document Number P650SE Rev 6-71-P6508-D03 Thursday, October 23, 2014 Sheet 61 D03 of 77 Schematic Diagrams Power Board B3.3VS D D BJ_BTN1 BM_BTN# NC1 NC2 BGND B3.3VS POWER BUTTON *0_04 4BR *0_04 2BR *0_04 5BR *0_04 3BR *0_04 6BR *0_04 Sheet 62 of 72 Power Board POWER SWITCH LED B_SW1 TJE-532-Q-T/R C 1BR BM_BTN# C 20mil BR1 220_1%_04 PCB Footprint = NTC017-BB1J-X160T BD2 20mil BC2 0.1u_50V_Y5V_06 BGND 20mil BC1 *V15AVLC0402 *0.1u_16V_Y5V_04 BGND BH1 *H6_3D2_3 BH3 *H6_3D2_3 BH4 *H3_2D2_2 BH2 *H3_2D2_2 BGND A VARISTOR 6-24-30003-006 BD1 P2808A1, ‫ߪء‬ᄎᗈᄤ, P2808A1 ኙ࿜ D26 mounted VARISTOR BLUE RE2*0.8 2P P/N = RY-SP190DNB84-5/1X C BGND BGND BGND BGND B B BGND ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ A Title Size A4 Date: A [62] P650SE POWER BOARD Document Number P650SE Rev 1B 6-71-P650C-D01B Monday, August 18, 2014 Sheet 62 of 77 Power Board B - 63 Downloaded from www.Manualslib.com manuals search engine B.Schematic Diagrams FP226H-004S10M PCB Footprint = fp226h-004xxxm_r Schematic Diagrams HDD Board SATA PORT1 HJ_SATA1 S1 S2 S3 S4 S5 S6 S7 D H_SATA_TXP1 H_SATA_TXN1 D H_SATA_RXN1 H_SATA_RXP1 NC1 NC2 HGND 10 12 14 16 18 20 22 24 26 28 30 HGND P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 HC13 HC11 *0.01u_16V_X7R_04 *10u_6.3V_X5R_06 H_5VS HGND HGND H_5VS HC9 HC10 HC12 0.1u_16V_Y5V_04 1u_6.3V_X5R_04 10u_6.3V_X5R_06 + HC8 EEFCX0J221YR 220u,6.3V,ESR=15mȍ,H=1.9mm 10 12 14 16 18 20 22 24 26 28 30 11 13 15 17 19 21 23 25 27 29 11 13 15 17 19 21 23 25 27 29 HSATA_TXP1 HSATA_TXN1 HSATA_RXN1 HSATA_RXP1 HGND H_3.3VS 50009-03041-001 P/N = 6-21-C2430-215 PCB Footprint = 50009-0304x 51824-0227A-001 P/N = 6-20-437J0-022 PCB Footprint = 50887-0220A-XXX HGND HGND C C H_3.3VS SATA re-driver HC6 *0_04 0.1u_16V_Y5V_04 1u_6.3V_X5R_04 PIN6 PIN10 PIN16 HGND HGND HU1 HSATA_TXP1 HSATA_TXN1 HC4 HC3 0.01u_16V_X7R_04 0.01u_16V_X7R_04 0_04 HSATA_RXN1 HSATA_RXP1 HC2 HC1 0.01u_16V_X7R_04 0.01u_16V_X7R_04 HR11 4.7K_04 RX1P RX1N From PCH B HR9 HC5 0.01u_16V_X7R_04 HGND Port HR10 HGND HC7 Note: Close to Re-driver IC 10 16 20 Sheet 63 of 72 HDD Board HJ_MB1 DEW2 VCC33 DEW1 VCC33 B.Schematic Diagrams H_3.3VS HOST EN TX1P TX1N DEVICE TX2N TX2P RX2N RX2P 15 14 HTXP1 HTXN1 12 11 HRXN1 HRXP1 HC17 0.01u_16V_X7R_04 H_SATA_TXP1 HC16 0.01u_16V_X7R_04 H_SATA_TXN1 HC15 0.01u_16V_X7R_04 H_SATA_RXN1 HC14 0.01u_16V_X7R_04 H_SATA_RXP1 B To Conn HR1 *0_04 HR8 *0_04 HTXP1 HSATA_TXN1 HR2 *0_04 HR7 *0_04 HTXN1 HSATA_RXN1 HR3 *0_04 HR5 *0_04 HRXN1 HSATA_RXP1 HR4 *0_04 HR6 *0_04 HRXP1 HR12 HR21 HR16 *100K_04 *100K_04 *100K_04 HR13 HR20 *0_04 *0_04 HGND 8/6 Update for ֊partationኬ ኬ HR17 GND EQ2 18 19 DE_2 EQ1 DE1 21 13 17 H_3.3VS co-lay, place under SN75LVCP601 HSATA_TXP1 T-PAD GND GND Note: Close to Re-driver IC ASM1466_new HR15 HR19 *100K_04 *100K_04 HR14 HR18 *0_04 *0_04 8/6 Update for ֊partationኬ ኬ 2K_1%_04 H_3.3VS HGND HGND HH4 *H6_3D2_3 A HH3 *H6_3D2_3 HH1 *H6_3D2_3 A D02 ᖲዌᄅᏺૻ೏0೴ ೴഑Ⴡ‫ػ‬ዪ HGND HGND HGND 1HR *0_04 4HR *0_04 2HR *0_04 5HR *0_04 3HR *0_04 6HR *0_04 ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size A3 Date: B - 64 HDD Board Downloaded from www.Manualslib.com manuals search engine [63] P650SE HDD B'd_H Document Number P650SE Rev D02 6-71-P650N-D02 Monday, August 18, 2014 Sheet 63 of 77 Schematic Diagrams LED Board LJ_LED1 LLED_ACIN LLED_PWR LLED_BAT_CHG LLED_BAT_FULL LLED_NUM# LLED_CAP# LLED_SCROLL# L_WLAN_AIRPLANE# L_dGPU_LED LSATA_LED# NC1 NC2 LD9 LLED_PWR LR9 Green LLED_ACIN P65 LED D02 LR7 LD11 LLED_BAT_FULL C LR13 A A MBD03 BCN RY-SP260UYG24-5M LD10 330_04 330_04 RY-SP260UYG24-5M LD12 LOT3 LLED_BAT_CHG C Amber C D Green LOT3 LR11 330_04 A C Amber RY-SP260USO24-5M LED_GND RY-SP260USO24-5M AC IN/POWER ON LED L_3.3VS FP225H-012S10M PCB Footprint = fp225-012g A 330_04 MBD03 BCN BAT CHARGE/FULL LED LED_GND P65 LED D02 LED_GND 1LR *0_04 4LR *0_04 2LR *0_04 5LR *0_04 3LR *0_04 6LR *0_04 L_3.3VS Sheet 64 of 72 LED Board P65 LED D02 C C LR3 LR5 LR4 330_04 330_04 330_04 MBD03 BCN 330_04 LOT3 LR1 A 330_04 A A A A LR2 A LR6 330_04 RY-SP260UYG24-5M RY-SP260UYG24-5M RY-SP260UYG24-5M RY-SP260UYG24-5M RY-SP260UYG24-5M dGPU LED SCROLL LOCK LED CAPS LOCK LED NUM LOCK LED AIRPLANE LED HDD LED C LLED_SCROLL# LLED_CAP# LLED_NUM# C LD2 RY-SP260UYG24-5M C LD3 C LD5 C LD6 C LD7 C LD4 L_WLAN_AIRPLANE# LSATA_LED# B L_dGPU_LED E B B LQ1 DTC114EUA P65 LED D02 LED_GND LH1 *H3_2D2_2 LED_GND LH4 *H3_2D2_2 LH3 *H6_3D2_3 LED_GND LED_GND LH2 *H6_3D2_3 LED_GND P65 LED D03 ᏺ‫ྒྷף‬រ ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ A Title Size A4 Date: A [64] P650SE LED BOARD Document Number P650SE Rev 6-71-P6504-D03 Saturday, September 27, 2014 Sheet 64 D03 of 77 LED Board B - 65 Downloaded from www.Manualslib.com manuals search engine B.Schematic Diagrams 12 11 10 D Schematic Diagrams Finger Sensor Board B.Schematic Diagrams Sheet 65 of 72 Finger Sensor Board F3.3V F2.5V F3.3V FLED1 FMOSI FMCLK FDISCON C F_XOUT 10 F2.5V 11 F3.3V 12 F_RST_N 13 14 15 EGND MODE AVDD DP DVDD DN VDDIO LED1 SPI_MOSI LED2 RVDD RESETN FMOSI FMCLK FMCS FMISO F3.3V 26 FMCS 25 FMISO F_XIN F_XOUT F_RST_N FLED2 F3.3V 21 XI B FLED1 FLED2 FDISCON FUSB_PN FUSB_PP SPNZ-24S1-B-017-1-R P/N = 6-21-41700-212 F_XIN FGND FGND C 19 F3.3V 18 NOTE: CLK_SEL CLK_SEL=HIGH (NC) , FREQ=12MHz Crystal CLK_SEL=LOW , FREQ=48MHz OSC 17 16 ES603-WB FGND F3.3V 10 12 14 16 18 20 22 24 20 CLK_SEL EGND_1 FJ1 11 13 15 17 19 21 23 F2.5V 22 AVSS EGND_2 FUSB_PN 23 AVDD_1 SGND FUSB_PP 24 AVSS_1 DVSS 29 28 27 SPI_MISO DVSS_1 DVDD_1 D UVDD DISCON XO 30 SPI_CS SPI_CLK UVSS NOTE: MODE MODE=HIGH (NC) , USB MODE MODE=LOW , SPI MODE FU1 D FGND B **GU1ல லᢰլ‫ྒྷףױ‬រ,‫א‬ ‫܍א‬Ղٙ৵࿍ሁ FJ1 23 24 BOTTON VIEW 23 24 TOP VIEW ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ A Title Size A4 Date: B - 66 Finger Sensor Board Downloaded from www.Manualslib.com manuals search engine A [65]FINGER SENSOR BOARD Document Number P650SE Rev 1B 6-71-P650F-D01B Monday, August 18, 2014 Sheet 65 of 77 Schematic Diagrams Click Board T3.3V NC1 NC2 T_TP_BTN_L TH2 H7_0D3_7 T_TP_BTN_R TH1 H7_0D3_7 T_TP_VCC TGND TR5 TR6 27.4_1%_04 27.4_1%_04 TUSB_PN10 TUSB_PP10 TGND FP226H-004S10M PCB Footprint = fp226h-004xxxm_r NC1 NC2 T_TP_CLK T_TP_DATA T_TP_BTN_L T_TP_BTN_R 50501-0060N-001 TJ_MB TJ_TP D TD1 T_TP_CLK T_TP_DATA TGND *V15AVLC0402 TC9 0.1u_10V_X7R_04 FP226H-004S10M PCB Footprint = fp226h-004xxxm_r TGND TD2 *V15AVLC0402 TGND D NC1 NC2 FP226H-004S10M PCB Footprint = JXT_FP226H-004XXAM T_TP_VCC TGND TL1 FCM1005KF-121T03 TJ_FP1 W/O FPழ ழΔ‫׽‬Ղ‫ڼ‬೴ሿٙ TJ_CLICK TGND TGND It is strongly recommended that the TESD_GND has a dedicated connection to the system chassis or cable shield Click D02 TU1 TUSB_PP10 0.1u_10V_X7R_04 VP NC NC VN CH2 CH1 TUSB_PN10 TJ_FPB1 CM1293A-02SO TGND 11 13 15 17 19 21 23 T2.5V TGND FOR ESD, ᔾ२FFC CONNECTORឭ࣋ C TMOSI TMCLK TMCS TMISO T_XIN T_XOUT T_RST_N T_XIN TR2 TGND T_XOUT 1M_04 15p_50V_NPO_04 C Sheet 66 of 72 Click Board TLED1 TLED2 TDISCON NOTE: MODE MODE=HIGH (NC) , USB MODE MODE=LOW , SPI MODE TUSB_PN10 TUSB_PP10 *CON24A QPOFZ-24R2-XD-Z-LD TGND TX1 HSX321G_12Mhz TC4 T3.3V 10 12 14 16 18 20 22 24 TGND Place Botton TGND TC5 15p_50V_NPO_04 Click D02 TGND TLED1 TR3 10K_04 TLED2 TR4 10K_04 TGND B B T2.5V T3.3V TGND NOTE: CLK_SEL CLK_SEL=HIGH (NC) , FREQ=12MHz Crystal CLK_SEL=LOW , FREQ=48MHz OSC TC1 TC6 4.7u_6.3V_X5R_06 0.1u_10V_X7R_04 4.7u_6.3V_X5R_06 G TGND TUSB_PP10 TGND TR7 1.5K_04 TR1 47K_04 TDISCON TQ1 AO3415 D TC7 0.1u_10V_X7R_04 S T3.3V TC3 CLOSE TO SENSOR POWER PIN T3.3V T_RST_N 1TR *0_04 4TR *0_04 2TR *0_04 5TR *0_04 3TR *0_04 6TR *0_04 TC2 1u_6.3V_X5R_04 A A Click D02 ᖲዌലTJ_FPB1Ղ Ղฝ0.33mm TGND Click D03 ଥ‫ޏ‬TD1, TD2, TC9 ฝၲૻ೏೴ Title Size A3 Date: ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ [66] P650SE CLICK BOARD Document Number P650SE Rev D03 6-71-P6502-D03 Monday, August 18, 2014 Sheet 66 of 77 Click Board B - 67 Downloaded from www.Manualslib.com manuals search engine B.Schematic Diagrams T3.3V TC8 Schematic Diagrams USB Board 1/4 LAN (RTL8411B) KR80 0_06 15" USB D02 KR69 6.8p_50V_NPO_04 KGND KPCIE_W AKE# KVDD10 B KAVDD33 K3.3VS SD_CMD SD_VDD SD_CLK P6 KSD_D0/MS_D1_R SD_VSS2 P7 KSD_D1_R BIOS pulls high or low to GPO pin, Pkease refer to LAN/PHY Disable Application Note KR39 1K_04 SD_DATA0 36 35 34 33 32 31 30 29 28 27 26 25 KREGOUT KD3V3 KENSW REG KISOLATEB KPERSTB KR31 KCLKREQB KMS_BS/SD_W P# KRTL8411B_HSON KRTL8411B_HSOP Remind that R109 using the main power (S0 power) KVDD10 KAVDD33 KGND KSD_CMD/MS_D2 KR93 0_04 KSD_CMD/MS_D2_R KSD_D0/MS_D1 KR94 0_04 KSD_D0/MS_D1_R 68,70 KR22 0_04 KLAN_CLKREQ# 68 LAN_CLKREQ#‫ڕ‬ ‫ڕ‬լࠌ‫ױش‬ឰၲ,࣍ ࣍PCHጤ ጤऴ൷PULL DOWN 0.1u_10V_X7R_04 0.1u_10V_X7R_04 KSD_D1 KR95 KPCIE_RXN5_GLAN KPCIE_RXP5_GLAN 68 68 0_04 KSD_D1_R KSD_D2/MS_CLK KR96 0_04 KSD_D2/MS_CLK_R KSD_CLK/MS_D0 KR97 0_04 KSD_D3/MS_D3 0_04 PULL HIGH: SWR Mode KEVDD10 KSD_D1 KSD_D0/MS_D1 KSD_CLK/MS_D0 KSD_CMD/MS_D2 KSD_D3/MS_D3 KSD_D2/MS_CLK KCARD_3V3 ߨփᐋ KAVDD33 0_04 KC61 0.2R 5% SMD0603 40 mil KR2 0.1u_16V_Y5V_04 PIN3 0.1u_16V_Y5V_04 PIN8 0.1u_16V_Y5V_04 PIN32 0.1u_16V_Y5V_04 PIN46 0.1u_16V_Y5V_04 *150_06 KGND KGND KC87 KC88 KC89 KC90 KC91 KC92 KGND KGND KGND KGND KGND KGND KGND KVCC_CARD 15" USB D02 KVCC_CARD KC6 KC51 B KSD_D3/MS_D3_R *0_04 Near Cardreader CONN KR1 KC39 KGND KSD_CLK/MS_D0_R Close to chip 13 14 15 16 17 18 19 20 21 22 23 24 KENSW REG KR55 PULL LOW: LDO Mode KVDD10 KC52 GND1 GND2 GND3 GND4 *5p_50V_NPO_04 68 68 SD_C/D *5p_50V_NPO_04 KVDD10 68 68 KPCIE_TXN5_GLAN KPCIE_TXP5_GLAN GND1 GND2 GND3 GND4 SD_WP *5p_50V_NPO_04 GIGA LAN KR98 ৱEMIᒔ ᒔᎁ‫ݙ‬,‫ޏ‬ ‫ޏ‬SHORT capacitors must be close to pin side KCLK_PCIE_GLAN# KCLK_PCIE_GLAN SD_DATA1 CM2S-061-H-N PCB Footprint = SD-10395-001-3 *10K_04 KBUF_PLT_RST# KC25 KC26 P11 KR23 KGND *10mil_short KVDD33/18 KSD_CD# K3.3VS KR38 15K_04 KREGOUT P10 K3.3VS KC59 0.1u_16V_Y5V_04 REG_OUT VDDREG ENSWREG VDD1 VD33 ISOLATEBPIN PERSTBPIN CLKREQBPIN MS_BS/SD_WP# DV33_18 HSON HSOP P8 KMS_BS/SD_W P# A SD_VSS1 P5 *5p_50V_NPO_04 KCARD_3V3 KGND KSD_CLK/MS_D0_R T87 T86 KR54 KVDD33/18 SD_DATA3 *5p_50V_NPO_04 RTL8411B KGND SD_DATA2 *5p_50V_NPO_04 0.1u_16V_Y5V_04 PIN12 C P2 P4 0.1u_16V_Y5V_04 RTL8411B QFN48 KGND KVDD10 P1 KSD_CMD/MS_D2_R KVCC_CARD ၦขᒔᎁ৵ሽॴ,‫ޏ‬ ‫ޏ‬SHORTሿ ሿٙ TO EC8587 PIN123 LAN_WAKEUP# 48 47 46 45 44 43 42 41 40 39 38 37 MDIP0 MDIN0 AVDD10 MDIP1 MDIN1 MDIP2 MDIN2 AVDD10 MDIP3 MDIN3 HV_GIGA VDD3 KC34 KVDD10 P9 KSD_D3/MS_D3_R P3 KC85 KLED1/GPO KLED2 KSD_D2/MS_CLK_R KGND 68 KLAN_W AKEUP# CARD_3V3 SD_D1 SD_D0/MS_D1 SD_CLK/MS_D0 SD_CMD/MS_D2 SD_D3/MS_D3 SD_D2/MS_CLK VDDTX HSIP HSIN REFCLK_P REFCLK_N Sheet 67 of 72 USB Board 1/4 KC64 *0.1u_16V_Y5V_04 LDO Modeழ ழ: La,Ca,Cb լՂٙ,RaՂ Ղٙ 68,70 TO SB PCH WAKE# KLAN_W AKEUP# Cb KC66 *4.7u_6.3V_X5R_06 KGND KLAN_MDIP3 KLAN_MDIN3 10 11 12 KLAN_MDIP1 KLAN_MDIN1 KLAN_MDIP2 KLAN_MDIN2 (>20mil) Ca KAVDD33 A RB751S-40C2 HV_GIGA RSET LV_CEN CKXTAL2 CKXTAL1 MS_CD# SD_CD# LED0 LED_CR LANWAKEB LED1/GPO LED2 E_PAD KGND KLAN_MDIP0 KLAN_MDIN0 KVDD10 KJ_CARD1 KVDD10 KGND KU5 49 10K_04 C KD5 6.8p_50V_NPO_04 KGND KL4 *SW F2520CF-4R7M-M FOR S5 WAKE UP ON LAN T85 KAVDD33 KC71 KGND B.Schematic Diagrams KXTAL2 KXTAL1 KC72 La KREGOUT KGND KX1 C286-001_25MHZ PCB Footprint = FSX3M *1K_04 KGND KSD_CD# KEECS KLED_CR KGND KGND KVDD10 KXTAL1 2.49K_1%_04 KR70 A 1M_04 KR71 IN SOCKET ࣨՂStandard PUSH PUSH CARD READER KVDD10 (>20mil) KRSET KXTAL2 KR77 Switching Regulator close to PIN48 Ra SD Card Remove Fall time less than ms when SD card remove KC7 KC8 KC9 0.1u_16V_Y5V_04 2.2u_6.3V_X5R_04 2.2u_6.3V_X5R_04 C ಻‫ٽ‬ᖲዌૻ೏Δ‫شޏ‬0402 KGND KGND KGND KVDD33/18 Near Cardreader CONN 15" USB D02 KC31 *2.2u_6.3V_X5R_04 Pin#27 KGND KC33 KR100 KR99 KL5 0.1u_16V_Y5V_04 Pin#27 ಻‫ٽ‬ᖲዌૻ೏ ‫شޏ‬0402 KGND KEVDD10 KVDD10 KR13 0_06 VDD3 meet rising time >1ms KC30 KC29 0.1u_16V_Y5V_04 PIN20 1u_6.3V_X5R_04 PIN20 KGND KVDD3 KR51 *15mil_short KGND KR64 KAVDD33 KLAN_MDIN0 KLAN_MDIP0 KLAN_MDIN1 KLAN_MDIP1 12 11 KLAN_MDIN2 KLAN_MDIP2 KLAN_MDIN3 KLAN_MDIP3 *15mil_short KC36 D KC49 0.1u_16V_Y5V_04 PIN11 10 KC62 0.1u_16V_Y5V_04 PIN32 0.1u_16V_Y5V_04 PIN48 40 mil TD4TD4+ TD3TD3+ MX4MX4+ MX3MX3+ TD2TD2+ TD1TD1+ MX2MX2+ MX1MX1+ TCT4 TCT3 TCT2 TCT1 MCT4 MCT3 MCT2 MCT1 13 14 16 17 KLMX1KLMX1+ KLMX2KLMX2+ 19 20 22 23 KLMX3KLMX3+ KLMX4KLMX4+ KL3 *HCB1608KF-121T25 K3.3V KGND KD3V3 60 mil KR74 KGND 0.01u_16V_X7R_04 LDO Mode KC58 *4.7u_6.3V_X5R_06 PIN35 *0.1u_16V_Y5V_04 PIN35 KJ_RJ1 KDLMX1+ KDLMX1- KDLMX2+ KDLMX2- KDLMX3+ *W CM2012F2S-161T03 KR102 0_04 15" USB KR101 0_04 KL9 KDLMX4- 15 18 21 24 KDLMX3+ KDLMX3- KDLMX4+ KDLMX4- D02 DA+ DADB+ DB- KGND GND1 GND2 shield shield KGND DC+ DCDD+ DD- 68 68,69 68,70 PJS-08SO1B-1 P/N = 6-21-B4040-008 PCB Footprint = PJS-08SL3B KDLMX4+ *W CM2012F2S-161T03 KC75 *15mil_short KC60 KDLMX1- KDLMX2+ *W CM2012F2S-161T03 KR104 0_04 KR103 0_04 KL8 KDLMX3- NS892402 KGND 0_04 0_04 KDLMX1+ *W CM2012F2S-161T03 KR106 0_04 KR105 0_04 KL6 KDLMX2- KL7 KNMCT_4 KNMCT_3 KNMCT_2 KNMCT_1 KR81 KR83 KR88 KR89 75_1%_04 75_1%_04 75_1%_04 75_1%_04 KVDD3 K3.3V K3.3VS 1KR *0_04 4KR 2KR *0_04 5KR *0_04 3KR *0_04 6KR *0_04 *0_04 ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ KNMCT_R KC84 Title [67] P650SE USB BOARD_K 1/4 MA1206CG-101J-202ER Size A3 Document Number Rev D03 6-71-P6503-D03 KGND KGND B - 68 USB Board 1/4 Downloaded from www.Manualslib.com manuals search engine Date: KGND Monday, August 18, 2014 Sheet 67 of 77 D Schematic Diagrams USB Board 2/4 USB3.0 re-driver K3.3V USB3.0 PORT6 K3.3V KR67 KR62 KR58 D *4.7K_04 *4.7K_04 *4.7K_04 KR68 KR63 KR59 KR52 *4.7K_04 KR53 2K_1%_04 KR46 *4.7K_04 KR47 0_04 KUSBVCC3.0_6 KR36 KR78 *4.7K_04 *4.7K_04 KU3 K5V K_SCK_P6 K_SDA_P6 VIN VOUT C OS1 GND EN_RXD DE1 EQ1 GND TX2VCC RX2+ TX2+ EN# OC# KC45 KC46 0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04 K_SCK_P6 KC44 0.1u_10V_X7R_04 KUSB3_TXN6 KC43 0.1u_10V_X7R_04 KUSB3_TXP6 KGND KDD_ON# KR28 *10mil_short_04 From PCH KC42 0.1u_10V_X7R_04 KUSB3_RXN6 KC41 0.1u_10V_X7R_04 KUSB3_RXP6 KGND 2A/90mohm KGND 68,69 KGND 11 12 KC82 P65 USB D02 KC83 KUSBVCC3.0_6 KR75 0_04 KR76 *4.7K_04 KR56 KR60 KR65 KR72 *0_04 *0_04 *0_04 *0_04 KR57 KR61 KR66 KR73 *4.7K_04 *4.7K_04 *4.7K_04 *4.7K_04 K3.3V KTXP6_J ‫࠷ڂ‬௣co-lay, ‫࠷ޡٵ‬௣ሽ୲ K3.3V KTXN6_J KUSB_PN9_J KC27 KC50 KC47 KUSB_PP9_J KRXP6_J 0.01u_16V_X7R_04 0.1u_10V_X7R_04 1u_6.3V_X5R_04 KRXN6_J USB3.0 Max Trace length < 4" KGND P65 USB D02 KGND KGND ࠷௣co-lay, ‫ྤڂ‬layout़ ़ၴ KD4 KUSB_PN9 KL1 KUSB_PP9 *W CM2012F2S-161T03-short KUSB_PN9_CON KUSB_PP9_CON KGND KD2 KUSB_PN9_J KUSB_PP9_J KGND 10 KTXP6 KTXN6 KRXP6 KRXN6 KGND PUSB3F96 LAN BOARD 22u_6.3V_X5R_08 KGND P65 USB D02 SSTX+ SHIELD VBUS SSTXDGND D+ SSRX+ GND_D SSRX- SHIELD GND1 GND2 C Sheet 68 of 72 USB Board 2/4 377AH09FZT S4NVCB KGND P/N = 6-20-B4Z40-109 PCB Footprint = 317AH09FZTS4T4CX P65 USB D02 10 PUSB3F96 22u_6.3V_X5R_08 KJ_USB3_2 CLOSE TO CONNECTOR ASM1464 PCB Footprint = QFN24-4X4MM D SY6288DAAC PCB Footprint = M-SOT23-5A 10 GND RX2CM 19 OS2 20 KC67 18 KC68 13 21 *0_04 0.1u_10V_X7R_04 NC RX1RX+ 14 KR90 0.1u_10V_X7R_04 KRXP6 GND KR79 *4.7K_04 KGND TX1+ DE2 KGND KRXN6 TX1- KR37 *4.7K_04 KGND 100 MIL KTXP6_J KTXN6_J KGND KRXP6_J KRXN6_J D03 BCN followֆ‫ش‬ᒵሁ P65 USB D02 (ܶ ܶUSB3.0x2, PHONE JACK, SIM) KH7 *H7_5D2_8 KH9 *H9_5B6_5D2_8 KH8 *H9_5B6_5D2_8 KH2 *H7_0B7_5D2_2 KH1 *H7_0B7_5D2_2 KJ_MB1 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 K5V B KC4 KVDD3 KC5 2.2u_6.3V_X5R_04 0.1u_16V_Y5V_04 P65 USB D02 KC2 KGND KGND 0.1u_16V_Y5V_04 KGND K3.3V K3.3VS KC3 KC1 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 KGND KGND KVDD3 K3.3V 69 KUIM_PW R 69 KUIM_DATA 69 KUIM_CLK 69 KUIM_RST A K3.3VS 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 49 51 53 55 57 59 61 63 65 67 69 71 73 75 77 79 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 KUSB_PN9 KUSB_PP9 B KUSB3_TXN6 KUSB3_TXP6 KUSB3_RXN6 KUSB3_RXP6 KGND KUSB_PN1 KUSB_PP1 69 69 KUSB3_TXN2 KUSB3_TXP2 KUSB3_RXN2 KUSB3_RXP2 KH3 *H4_2D2_2 69 69 69 69 KGND KGND KH6 *H4_2D2_2 KGND 67 67 67 67 KGND KGND KH4 *H7_5D2_8 KGND KGND KLAN_CLKREQ# 67 KPCIE_W AKE# 67,70 KLAN_W AKEUP# 67 KBUF_PLT_RST# 67,70 KDD_ON# 68,69 K5V 69 KVDD3 67 K3.3V 67,69 K3.3VS 67,70 A KCLK_PCIE_SD40# 70 KCLK_PCIE_SD40 70 KPCIE_TXN7_SD40 KPCIE_TXP7_SD40 KPCIE_RXN7_SD40 KPCIE_RXP7_SD40 KSD40_CLKREQ# 70 70 70 70 ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title 70 Size A3 P65 USB D03 ଥ‫ޏ‬lib ֡՚ KH5 *H4_2D2_2 KGND KCLK_PCIE_GLAN# 67 KCLK_PCIE_GLAN 67 KPCIE_TXN5_GLAN KPCIE_TXP5_GLAN KPCIE_RXN5_GLAN KPCIE_RXP5_GLAN 51049-08041-001 PCB Footprint = 51049-0804X KGND KGND Date: [68] P650SE USB BOARD 2/4 Document Number P650SE Rev D03 6-71-P6503-D03 Saturday, September 27, 2014 Sheet 68 of 77 USB Board 2/4 B - 69 Downloaded from www.Manualslib.com manuals search engine B.Schematic Diagrams To Conn GND NC EQ2 22 GND 23 KC69 15 KC70 0.1u_10V_X7R_04 16 0.1u_10V_X7R_04 KTXP6 17 25 24 K_SDA_P6 KTXN6 VCC KU6 KC28 10u_6.3V_X5R_06 KGND (MB‫׳‬ ‫׳‬Հ) P65 USB D02 *0_04 *0_04 *0_04 Standard-A Schematic Diagrams USB Board 3/4 USB3.0 PORT2 USB3.0 re-driver (MB‫׳‬ ‫׳‬Ղ) K3.3V K3.3V KUSBVCC3.0_2 KR40 KR33 KR24 *4.7K_04 *4.7K_04 *4.7K_04 KR32 KR25 KR19 *0_04 *0_04 *0_04 D KR18 *4.7K_04 KR15 2K_1%_04 KR14 *4.7K_04 KR11 0_04 KR50 KR45 *4.7K_04 *4.7K_04 VOUT GND 68 KGND KR42 KDD_ON# *10mil_short_04 EN# OC# 100 mil KC48 KC40 0.1u_16V_Y5V_04 *0.1u_16V_Y5V_04 SY6288DAAC PCB Footprint = M-SOT23-5A KR44 *4.7K_04 D KGND KRXP2 0.1u_10V_X7R_04 KC53 19 OS1 GND EN_RXD DE1 EQ1 VCC RX2- TX2- RX2+ K_SCK_P2 KC24 KC23 10 TX2+ KGND KGND 0.1u_10V_X7R_04 KUSB3_TXN2 68 0.1u_10V_X7R_04 KUSB3_TXP2 68 KC81 KC80 KUSBVCC3.0_2 KC22 0.1u_10V_X7R_04 12 KC21 0.1u_10V_X7R_04 KUSB3_RXN2 68 KUSB3_RXP2 68 KTXP2_J ‫࠷ڂ‬௣co-lay, ‫࠷ޡٵ‬௣ሽ୲ KTXN2_J KUSB_PN1_J KUSB_PP1_J KRXP2_J ASM1464 PCB Footprint = QFN24-4X4MM K3.3V K3.3V KRXN2_J C KR48 0_04 KR43 *4.7K_04 KR20 KR29 KR34 KR41 *0_04 *0_04 *0_04 *0_04 KR16 KR21 KR30 KR35 *4.7K_04 *4.7K_04 *4.7K_04 *4.7K_04 P65 USB D02 KC65 0.01u_16V_X7R_04 22u_6.3V_X5R_08 KC63 KC57 0.1u_10V_X7R_04 1u_6.3V_X5R_04 KGND P65 USB D02 KJ_USB3_1 From PCH KGND 11 22u_6.3V_X5R_08 GND1 Standard-A 20 RX+ GND VCC KC54 RX1- GND CM 0.1u_10V_X7R_04 KGND NC TX1+ OS2 KRXN2 TX1- 13 21 14 22 DE2 23 KC55 EQ2 KC56 *0_04 GND KR91 15 Sheet 69 of 72 USB Board 3/4 0.1u_10V_X7R_04 KGND 16 0.1u_10V_X7R_04 KTXP2 GND NC 17 25 24 18 B.Schematic Diagrams KU2 KTXN2 VIN 2A/90mohm KGND To Conn K_SCK_P2 K_SDA_P2 KR49 *4.7K_04 K_SDA_P2 KU8 K5V KC38 10u_6.3V_X5R_06 SSTX+ SHIELD VBUS SSTXDGND D+ SSRX+ GND_D SSRX- SHIELD GND2 C 377AH09FZT S4NVCB KGND P/N = 6-20-B4Z40-109 PCB Footprint = 317AH09FZTS4T4CX KGND KD3 KGND KGND ࠷௣co-lay, ‫ྤڂ‬layout़ ़ၴ 68 KUSB_PN1 68 KUSB_PP1 KL2 *W CM2012F2S-161T03-short KUSB_PN1_CON KUSB_PP1_CON KGND KUSB_PN1_J KUSB_PP1_J KGND 10 PUSB3F96 KD6 KTXP2 KTXN2 KRXP2 KRXN2 KGND 10 P65 USB D02 PUSB3F96 B KGND KRXP2_J KRXN2_J D03 BCN followֆ‫ش‬ᒵሁ B Layoutழ ழ SIMհ հࢬ‫ॾڶ‬ᇆᒵ‫ף‬ษ(10mil) ࢬ‫ॾڶ‬ᇆᒵհၴ‫ף‬GND ໮៥ SIM hold ‫᧯ء‬؄ࡌ‫ף‬GND໮ 4.SIM CONN ᔾ२ MINI CARD CONN SIMհ հ‫ޢ‬ԫॾᇆᒵऱLayoutၒ ၒᒵᏁ՛࣍10ֆ ֆ։ SIM CONN KR86 KTXP2_J KTXN2_J *4.7K_04 KJ_SIM1 KDETECT_SW KR82 1K_04 (TOP VIEW) KUIM_CLK KUIM_RST KUIM_CLK KUIM_RST KUIM_CLK_R KUIM_PW R_R DETECT_SW UIM_DATA UIM_CLK UIM_RST UIM_PWR UIM_MCMD UIM_I/O UIM_VPP UIM_GND KR84 *10mil_short KUIM_DATA_R KC76 *22p_50V_NPO_04 GND1 GND2 GND3 GND4 *22p_50V_NPO_04 KUIM_DATA KU7 68 KUIM_PW R KDETECT_SW KUIM_PW R KC78 *22p_50V_NPO_04 ON VIN VOUT 20 mil *22p_50V_NPO_04 1u_6.3V_X5R_04 KUIM_PW R_R KC79 0.1u_16V_Y5V_04 KC73 OC KR87 100K_04 GND TPS22945DCKR KGND KGND P/N = 6-86-2B010-001 PCB Footprint = 91712-0090P A KC74 91712-0090P-001 KC77 KUIM_DATA KUIM_VPP 68 GNG GND GND GND KR85 *10mil_short 68 68 KGND KGND KGND KGND KGND A KGND ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title K5V 68 K3.3V 67,68 K3.3VS 67,68,70 Size A3 Date: B - 70 USB Board 3/4 Downloaded from www.Manualslib.com manuals search engine [69] P650SE USB BOARD 3/4 Document Number P650SE Rev D03 6-71-P6503-D03 Saturday, September 27, 2014 Sheet 69 of 77 Schematic Diagrams USB Board 4/4 RSVD լՂٙΜ D D RTS5227 Colay RTS5250 K3V3AUX KR27 KCR1_LEDN KR26 *10K_04 *10K_04 K3.3VS IDD-3V3AUX: 375mA(typ) 67,68 A KD1 KPCIE_W AKE# KR17 Sheet 70 of 72 USB Board 4/4 40 mil *0_04 C *RB751S-40C2 100ohm +/- 15% space to others 20mil KC37 KC35 *4.7u_6.3V_X5R_06 *0.1u_16V_Y5V_04 C 32 31 30 29 28 27 26 25 C *0.1u_10V_X7R_04 *0.1u_10V_X7R_04 KHSOP KHSON PERST# CLKREQ# HSIP HSIN REFCLKP REFCLKN HSOP HSON KGND NC NC NC SP6 SP5 SP4 DV33_18 SP3 *RTS5227-GRT Pin 12, 14, 18 are outputs RREF AV12 3V3_IN CARD_3V3 NC DV12S SP1 SP2 KC20 KC18 WAKE# MS_INS# SD_CD# SP7 GPIO 3V3aux NC NC KU1 67,68 KBUF_PLT_RST# 68 KSD40_CLKREQ# 68 KPCIE_TXP7_SD40 68 KPCIE_TXN7_SD40 68 KCLK_PCIE_SD40 68 KCLK_PCIE_SD40# 68 KPCIE_RXP7_SD40 68 KPCIE_RXN7_SD40 10 11 12 13 14 15 16 33 GND 24 23 22 21 20 19 18 17 KGND KCc 20 mil KSDREG2 KC32 *0_04 *0_04 *0_04 20 mil KC19 KSP3 KR8 *0_04 KR7 *6.2K_1%_04 12 mil *1u_6.3V_X5R_04 qfn32-4x4mma KGND KSP2 KR4 KSP1 KR5 *0_04 *0_04 100ohm +/- 15% space to others 20mil KRREF 20 mil KDV12S KAV12 B KR6 *0_04 20 mil KGND P65 USB D02A *6.8p_50V_NPO_04 6-07-6R834-1A0 L (X is the designated drive number for the CD/DVD drive/USB flash drive) Type the following command: C:BIOS Update fsX:\> Flash.nsh The utility will then proceed to flash the BIOS You should then be prompted to press any key to restart the system or turn the power off, and then on again but make sure you remove the CD/DVD/USB flash drive from the CD/DVD drive/USB port before the computer restarts Restart the computer (booting from the HDD) With the CD/DVD/USB flash drive removed from the CD/DVD drive/USB port the computer should restart from the HDD Press F2 as the computer restarts to enter the BIOS Use the arrow keys to highlight the Exit menu Select Load Setup Defaults (or press F3) and select “Yes” to confirm the selection Press F4 to save any changes you have made and exit the BIOS to restart the computer Your computer is now running normally with the updated BIOS You may now enter the BIOS and make any changes you require to the default settings C-2 Downloaded from www.Manualslib.com manuals search engine ...Downloaded from www.Manualslib.com manuals search engine Preface Notebook Computer P650SE / P651SE Service Manual Preface I Downloaded from www.Manualslib.com manuals search engine Preface... www.Manualslib.com manuals search engine LCD Figure A - LCD A - Downloaded from www.Manualslib.com manuals search engine A.Part Lists LCD A.Part Lists A - Downloaded from www.Manualslib.com manuals... their respective companies II Downloaded from www.Manualslib.com manuals search engine Preface About this Manual This manual is intended for service personnel who have completed sufficient training