Clevo P95XHQ3 service manual

P955HQ3 Preface Notebook Computer P955HQ3 Service Manual Preface I Preface Notice The company reserves the right to revise this publication or to change its contents without notice Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes Preface Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer Version 1.0 August 2017 Trademarks Intel and Intel Core are trademarks of Intel Corporation Windows® is a registered trademark of Microsoft Corporation Other brand and product names are trademarks and /or registered trademarks of their respective companies II Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers It is organized to allow you to look up basic information for servicing and/or upgrading components of the P955HQ3 series notebook PC The following information is included: Chapter 1, Introduction, provides general information about the location of system elements and their specifications Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade elements of the system Preface Appendix A, Part Lists Appendix B, Schematic Diagrams Appendix C, Updating the FLASH ROM BIOS III Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to persons when using any electrical equipment: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool Avoid using a telephone (other than a cordless type) during an electrical storm There may be a remote risk of electrical shock from lightning Do not use the telephone to report a gas leak in the vicinity of the leak Use only the power cord and batteries indicated in this manual Do not dispose of batteries in a fire They may explode Check with local codes for possible special disposal instructions This product is intended to be supplied by a Listed Power Unit as follows: Preface • AC Input of 100 - 240V, 50 - 60Hz, DC Output of 19V, 10.5A (200 Watts) minimum AC/DC Adapter FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation IV Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged To prevent this, follow these suggestions: Don’t drop it, or expose it to shock If the computer falls, the case and the components could be damaged Do not expose the computer to any shock or vibration Do not place anything heavy on the computer Keep it dry, and don’t overheat it Keep the computer and power supply away from any kind of heating element This is an electrical appliance If water or any other liquid gets into it, the computer could be badly damaged Do not leave it in a place where foreign matter or moisture may affect the system Don’t use or store the computer in a humid environment Do not place the computer on any surface which will block the vents Preface Do not expose it to excessive heat or direct sunlight Do not place it on an unstable surface Follow the proper working procedures for the computer Shut the computer down properly and don’t forget to save your work Remember to periodically save your data as data may be lost if the battery is depleted Do not turn off the power until you properly shut down all programs Do not turn off any peripheral devices when the computer is on Do not disassemble the computer by yourself Perform routine maintenance on your computer V Preface Avoid interference Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields These can hinder proper performance and damage your data Take care when using peripheral devices Use only approved brands of peripherals Unplug the power cord before attaching peripheral devices Preface Power Safety The computer has specific power requirements:  VI • • Power Safety Warning • Before you undertake any upgrade procedures, make sure that you have turned off the power, and disconnected all peripherals and cables (including telephone lines and power cord) It is advisable to also remove your battery in order to prevent accidentally turning the machine on • • • Only use a power adapter approved for use with this computer Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply If you are unsure of your local power specifications, consult your service representative or local power company The power adapter may have either a 2-prong or a 3-prong grounded plug The third prong is an important safety feature; not defeat its purpose If you not have access to a compatible outlet, have a qualified electrician install one When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices Before cleaning the computer, make sure it is disconnected from any external power supplies Do not plug in the power cord if you are wet Do not use the power cord if it is broken Do not place heavy objects on the power cord Preface Battery Precautions • Only use batteries designed for this computer The wrong battery type may explode, leak or damage the computer • Do not continue to use a battery that has been dropped, or that appears damaged (e.g bent or twisted) in any way Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire • Recharge the batteries using the notebook’s system Incorrect recharging may make the battery explode • Do not try to repair a battery pack Refer any battery pack repair or replacement to your service representative or qualified service personnel • Keep children away from, and promptly dispose of a damaged battery Always dispose of batteries carefully Batteries may explode or leak if exposed to fire, or improperly handled or discarded • Keep the battery away from metal appliances • Affix tape to the battery contacts before disposing of the battery • Do not touch the battery contacts with your hands or metal objects Battery Guidelines Preface The following can also apply to any backup batteries you may have • If you not use the battery for an extended period, then remove the battery from the computer for storage • Before removing the battery for storage charge it to 60% - 70% • Check stored batteries at least every months and charge them to 60% - 70%  Battery Disposal The product that you have purchased contains a rechargeable battery The battery is recyclable At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream Check with your local solid waste officials for details in your area for recycling options or proper disposal Caution Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Discard used battery according to the manufacturer’s instructions Battery Level Click the battery icon in the taskbar to see the current battery level and charge status A battery that drops below a level of 10% will not allow the computer to boot up Make sure that any battery that drops below 10% is recharged within one week VII Preface Related Documents You may also need to consult the following manual for additional information: User’s Manual on CD/DVD This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup program It also describes the installation and operation of the utility programs provided with the notebook PC System Startup Remove all packing materials Place the computer on a stable surface Insert the battery and make sure it is locked in position Securely attach any peripherals you want to use with the computer (e.g keyboard and mouse) to their ports Attach the AC/DC adapter to the DC-In jack at the rear of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter Use one hand to raise the lid/LCD to a comfortable viewing angle (do not exceed 130 degrees); use the other hand (as illustrated in Figure 1) to support the base of the computer (Note: Never lift the computer by the lid/LCD) Press the power button to turn the computer “on” Preface 130° Figure Opening the Lid/LCD/ Computer with AC/DC Adapter Plugged-In  Shut Down Note that you should always shut your computer down by choosing the Shut down command in Windows (see below) This will help prevent hard disk or system problems Click the icon in the Start Screen and choose Shut down from the menu Or at the bottom of the Start Right-click the Start button Screen or the Desktop and choose Shut down or sign out > Shut down from the context menu VIII Schematic Diagrams NVVDDS NVVDDS PHASE NVVDDS FOR N17_VGA 1V8_AON PR266 *0_04 27 GPIO3_PS_NVVDDS_VID PWR_SRC_NVVDDS PR268 A 55 *10K_04 PWR_SRC_NVS_VINN_R PWR_SRC_NV_FB PRS3 RL1632T4F-B-R005-FNH PWR_SRC_NVS_VINNP_R 55 A COMMON *10K_04 4.32K_1%_04 EMI 16.5K_1%_04 UGATE1_UPI_1666 9/8 0_04 PR265 + 25TQC15MYFB PR269 *0_04 N17EG1 4.7u_25V_X5R_06 7/27 27,64 4.7u_25V_X5R_06 1u_25V_X7R_06 1V8_AON GPIO6_NVVDD_PSI# 1u_6.3V_X5R_04 PC147 PC21 PR1971 PC3 PR252 PR261 309_1%_04 PC143 PC141 *0.01u_50V_X7R_04 PR260 100K_04 PC144 0.1u_25V_X7R_06 4700p_50V_X7R_04 PR230 100_04 COMP LGATE2 PHASE2 2.2_04 17 PC2 16 1u_6.3V_X5R_04 qfn20-3x3mm-rt8816 PR240 NV3V3 C HP ᶵᶲ PWR_SRC_NVVDDS 10K_04 PR1 4/12 110K_1%_04 HP ᶵᶲ 4/13 PR239 0_04 10A PR229 2.2_1%_06 + 220u_2V_SMD-V A PD8 PC134 2200p_50V_X7R_04 HR/HP PQ15 MDU5693 SS1040G PC137 0.1u_25V_X7R_06 PL3 CMME063T-R24MS1R197 C PC9 PR237 100K_04 C B 1A HP ᶵᶲ NVVDDS_PWRGD + 5VS 1u_25V_X7R_06 29 A BOOST1 UGATE1 PVCC FB PR248 4.7u_25V_X5R_06 PR242 1K_1%_04 EN PSI VID FBDRTN 18 PVCC_UPI_1666 4.7u_25V_X5R_06 *CV-40mil 12 2200p_50V_X7R_04 PC19 PJ34 11 POWERᶲẞᢃៃᢃёῤ 2/16 PR232 PC139 *0_04 *120pF_50V_NPO_04 LGATE1 PC146 RT8816A FS/OC BOOT2 0_04 2.2_1%_06 4/12 PC20 NVVDDS 100_04 PR6 VREF PQ19 MDU5693 20 LX1_UPI_1666 19 PC14 HR/HP ᶵᶲ PR243 10 PHASE1 15 GPU_NVDDS_SENSE UP1666_FBDRTN 0_04 21 HR/HP ᶵᶲ 28,64 PR5 UGATE2 GPU_GNDS_SENSE 14 7/29 28,64 REFADJ PGOOD 13 NVVDDS_VREF GND 470u_2V_SMD-V B UP1666_REFADJ REFIN 499K_1%_1/16W_04 NVVDDS HR/HP PR246 PR271 PC22 PU8 PWR_SRC_NVVDDS PD9 0.1u_10V_X7R_04 Sheet 63 of 74 NVVDDS 0.6V~1.2V 20A PC6 10A HP ᶵᶲ PL4 CMME063T-R24MS1R197 SS1040G C NVVDDS 15R ⎒ྡ06ᔪྡ08size VDD3 PR10 PR12 PR9 PR11 15_1%_06 15_1%_06 15_1%_06 15_1%_06 PR24 5 5 PC18 2K_04 *10u_6.3V_X5R_06 PQ2 QM3006M3 D 29,63 D PQ21 2SK3018S3 D G NV_NVVDDS_EN S B.Schematic Diagrams 1A *0.1u_10V_X7R_04 PR255 6.19K_1%_04 PR253 7/26 PR250 20.5K_1%_04 UP1666_REFADJ PWR_SRC_NVVDDS 29,63 PC5 PC142 1500p_50V_04 1206 PC11 NVVDDS_VREF 1% PC8 NV_NVVDDS_EN 55,64,66 PWR_SRC_NV_FB 5,27,30,33,36,38,39,42,44,48,50,51,52,53,54,55,56,58,61,62,66 VDD3 12,13,32,40,41,49,50,51,52,64,66 5VS 13,14,24,25,27,28,29,54,55,64,66 1V8_AON 23,28,65 NVVDDS 12,13,14,27,54,55,64 NV3V3 P950HP3,P950HP6 = G1 Phase P950HR = G1 Phase ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title B - 64 NVVDDS [63] NVVDDS(Power) Size Document Number Custom P955HQx Date: PC17 *10u_6.3V_X5R_06 Rev D03 6-71-P9500-D03 Friday, June 23, 2017 Sheet 63 of 74 Schematic Diagrams NVVDD 1 PR290 1V8_AON GPIO6_NVVDD_PSI# 27,63 PW R_SRC_NV_FB PW R_SRC_NV 10K_1%_04 PRS1 PR26 *10K_1%_04 55 PW R_SRC_NV_VINN_R RL1632T4F-B-R005-FNH PW R_SRC_NV_VINP_R 55 COMMON 1% A 1V8_AON *0_04 PR287 *0_04 A PW R_SRC_NV layout 1pcs B2 ፕḢ2PCS 0805 size GPIO0_NVVDD_PW M_VID PR17 PC153 29 PC23 *0.01u_16V_X7R_04 20.5K_1%_04 0.1u_10V_X7R_04 PR21 6.19K_1%_04 PR299 INS148785425 MLP08 COMMON G1 2_1%_04 S1 PR302 PR20 D2 100K_1%_04 4/26 power ୫restart⓷᧔ 4.32K_1%_04 ,PC85ᶵᶲẞ PR16 16.5K_1%_04 PC159 0.1u_25V_X7R_06 G2 309_1%_04 D2 PQ24 CSD87350Q5D NV_VDD_L 4700p_50V_X7R_04 S2 8/5 ”NP-A”໇NO PASTEMASK PC160 2200p_50V_X7R_04 BOOT2 PH2_UPI_9509 UGATE2 PGOOD 17 16 18 UGATE2_UPI_9509 2_1%_04 S1 10K_1%_04 D2 PR22 PH1_UPI_9509 PR285 100K_1%_04 10K_1%_04 PC157 11K_1%_04 5VS PR289 *100K_1%_04 0.1u_25V_X7R_06 PR23 place at MOSFET side PQ26 CSD87350Q5D C PL6 CMME063T-R15MS0R907 10K_04 S2 PR304 *0_04 27 D GPIO29_NVVDD_PH1 15K 150us 1ms 20K 500us 1.5ms 30K 1ms OPEN 1.5ms PC172 2200p_50V_X7R_04 D 2ms PQ22 *MTN2002ZS3 S 23,28,65 NVVDD 55,63,66 PW R_SRC_NV_FB 12,13,14,27,54,55,63 NV3V3 12,13,32,40,41,49,50,51,52,63,66 5VS 2,11,27,29,42,43,44,45,46,47,49,50,52,53,54,55,57,58 3.3V 13,14,24,25,27,28,29,54,55,63,66 1V8_AON 5,27,30,33,36,38,39,42,44,48,50,51,52,53,54,55,56,58,61,62,63,66 VDD3 PR298 *10K_04 ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title Size A3 Date: 2.2_1%_06 HR/HPᶲẞ PR301 G 4/6 2017 PR308 PD11 G2 NVVDD 30A PR48 Output Voltage Ramp Up Time Test PH1_UPI_9509 D D2 NVVDD_PW RGD 1V8_AON *10K_04 8/5 INS148784909 MLP08 COMMON S1 PQ25 CSD87350Q5D G2 S2 PR293 *30.1K_04 SS1040G NV3V3 14,29 D1 G1 A PR284 INS148785103 MLP08 COMMON G1 PR294 PH2_UPI_9509 PR292 C EN UGATE1 BOOST1 VID PSI UGATE2_UPI_9509 D1 + 4.7u_25V_X7R_08 ISEN1 1u_16V_X7R_06 PC168 *25TQC15MYFB 25 19 PC171 PC12 PC158 4.7u_25V_X7R_08 PH3_UPI_9509 2/4 power change X7R 9/29 20 4.7u_25V_X7R_08 PR1930 10K_1%_04 65 C layout 1pcs B2 ፕḢ2PCS 0805 size PW R_SRC_NV 5VS 2.2_06 5VCC PC170 PHASE2 7/29 PR279 0_04 PR306 5VCC 21 PC166 COMP HR ᶵᶲ LGATE2 23 22 4.7u_25V_X7R_08 100_04 PVCC PC167 PR273 12 PWM3 RT8813DGQW FB B Sheet 64 of 74 NVVDD 65 PC169 NVVDD 11 PC150 *33p_50V_NPO_04 LGATE1 TON PW M3_1 24 PH1_UPI_9509 1u_25V_X7R_06 GPU_NVVDD_SENSE GPU_NVDDS_SENSE 100_04 PR277 *0_04 0_04 *0_04 HR ᶵᶲ VREF FBDRTN NVVDD 30A 0.6V~1.2V 4/6 2017 HR/HPᶲẞ PHASE1 1u_25V_X7R_06 28,55 28,63 PR19 PR13 PR7 10 15 0_04 *0_04 ISEN2 UP9509_FBDRTN PR14 PR4 ISEN3 UP9509_VREF 28,55 GPU_GND_SENSE 28,63 GPU_GNDS_SENSE REFADJ GND 4/26 power ୫restart⓷᧔ ,PC63ᶵᶲẞ 14 UP9509_REFADJ REFIN 499K_1%_1/16W _04 13 PR18 PW R_SRC_NV PU9 + 2.2_1%_06 B UP9509_FBDRTN PC152 PL5 CMME063T-R15MS0R907 PD10 G2 S2 PC155 PR307 place at MOSFET side PC15 *0.01u_50V_X7R_04 S1 A PC10 PC151 SS1040G PR8 PC154 INS148785000 MLP08 COMMON G1 PQ23 CSD87350Q5D PC156 1u_25V_X7R_06 4.7u_25V_X7R_08 4.7u_25V_X7R_08 1u_25V_X7R_06 4.7u_25V_X7R_08 4.7u_25V_X7R_08 D1 [64] NVVDD (Power) Document Number P955HQx Rev D03 6-71-P9500-D03 Friday, June 23, 2017 Sheet 64 of 74 NVVDD B - 65 B.Schematic Diagrams PC25 UP9509_REFADJ D1 *25TQC15MYFB UP9509_FBDRTN NV_NVVDD_EN PC16 4700p_50V_X7R_04 C UP9509_VREF PC13 27 PR286 1206 Schematic Diagrams NVVDD D layout 1pcs B2 ፕḢ2PCS 0805 size 7/26 PW R_SRC_NV UGATE PWM PHASE PGND LGATE D02A BOOT EN 64 PR1954 S1 D2 PQ55 CSD87350Q5D place at MOSFET side D2 DCR 0.6m ohm PL23 CMME063T-R15MS0R907 PQ56 CSD87350Q5D PD34 G2 S2 S2 SS1040G G2 INS148786996 MLP08 COMMON G1 S1 PR1949 100K_1%_04 INS148786924 MLP08 COMMON G1 2_1%_04 PH3_UPI_9509 C PR556 *0_04 VCC D1 A C GND PW M3_1 4.7u_25V_X7R_08 64 PH3_UPI_9509 D1 4.7u_25V_X7R_08 Sheet 65 of 74 NVVDD 0.1u_25V_X7R_06 PC736 PC734 PR1951 0_04 4.7u_25V_X7R_08 C RT9610BZQW PC738 1u_25V_X7R_06 PC726 2.2u_16V_X5R_06 PR1952 1K_1%_04 4.7u_25V_X7R_08 A PC295 PC719 PC723 1u_25V_X7R_06 PD33 MDL914S2 PC737 PR1942 2.2_06 PU30 D G1ᶵ ᶵᶲẞ/G2ᶲ ᶲẞ 5V 0.6V~1.2V NVVDD 30A C PR1947 2.2_1%_06 PC735 ”NP-A”໇NO PASTEMASK 3/7 co-layᶵᶲẞ ,૘ẍᾖᏻfootprintᥒPASTEMASK NVVDDS GPU DECOUPLING NVVDD 2200p_50V_X7R_04 120A PJ1 *3mm PJ60 *3mm + C178 PR1944 *0_04 PC35 220u_2V_SMD-V PC36 22u_4V_X6S_06 22u_4V_X6S_06 C121 PC34 PC37 + HP Short Only 22u_4V_X6S_06 22u_4V_X6S_06 220u_2V_SMD-V PC38 PC44 22u_4V_X6S_06 PC30 22u_4V_X6S_06 B + B PC43 470u_2V_SMD-V PC27 22u_4V_X6S_06 22u_4V_X6S_06 PC39 PC32 + PC26 22u_4V_X6S_06 22u_4V_X6S_06 220u_2V_SMD-V PC40 PC163 PC31 + B.Schematic Diagrams 22u_4V_X6S_06 47u_2.5V_X6S_08 220u_2V_SMD-V PC33 PC164 22u_4V_X6S_06 47u_2.5V_X6S_08 PC165 PC161 47u_2.5V_X6S_08 47u_2.5V_X6S_08 PC42 PC162 22u_4V_X6S_06 A A 47u_2.5V_X6S_08 ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ Title 23,28,64 NVVDD 23,28,63 NVVDDS 32,43,45,46,48,50,52,53,54,55,57,59,60,61 5V 5,27,30,33,36,38,39,42,44,48,50,51,52,53,54,55,56,58,61,62,63,66 VDD3 Size A3 Date: B - 66 NVVDD [65] NVVDD (Power) Document Number P955HQx Rev D03 6-71-P9500-D03 Friday, June 23, 2017 Sheet 65 of 74 Schematic Diagrams FBVDDQ FBVDDQ FOR N17_VGA NV_FBVDDQ_EN NV_FBVDDQ_EN 29 PC57 4/25 modify timing 10k change to 20k , *1500p change to 0.1u ేฌFBVDDQ RC, delay FBVDDQ_EN *0.1u_10V_X7R_04 A A 4/7 power change ᶵᶲẞ UP1666_VREF 3/14 PW R_SRC_NV_FB 19.6k change to 4.99k (power change) PR65 1K_04 PR54 0_04 UGATE1 PR89 PC67 PC62 1.35V PR57 12.1K_1%_04 *0.01u_50V_X7R_04 2200p_50V_X7R_04 100K_04 PC53 0_04 change to 12.1k (power change) BOOST1 C EN UGATE1 PSI VID REFIN BOOT2 UGATE2 PGOOD PW R_SRC_NV_FB 2A 17 PC52 16 1u_6.3V_X5R_04 15 14 13 GND 21 5VS 220u_2V_SMD-V *CV-40mil 2.2_04 + 220u_2V_SMD-V PJ3 qfn20-3x3mm-rt8816 PR74 1K_1%_04 LGATE2 PHASE2 PR312 + Sheet 66 of 74 FBVDDQ EMI PR51 0_04 UGATE2 3/28 ᾖᏻfootprint,‫ݸٽ‬ଉᓚ 4.7u_25V_X7R_08 FBVDDQ PVCC FB PVCC PC7 100_04 FBDRTN COMP 2200p_50V_X7R_04 18 + PC46 FBVDDQ_SENSE 12 19 PC177 28,55 PC59 *33p_50V_NPO_04 LGATE1 RT8816A FS/OC 0.1u_50V_Y5V_06 PR82 11 PR68 *0_04 VREF 4.7u_25V_X7R_08 0_04 PC178 100_04 PR75 10 FBDRTN 8/5 PC48 PR81 12/23 + B PC175 220u_2V_SMD-V 0_04 + PC4 PR83 2.2_1%_06 220u_2V_SMD-V 7/29 FBVDDQ_SENSE_RTN PHASE1 PQ28 MDU5693 LX1 330U_2V_D2_D UP1666_VREF 28,55 REFADJ 20 0.1u_10V_X7R_04 4/12 PC173 PU2 power change net 499K_1%_1/16W _04 PR309 PC47 PR94 PW R_SRC_NV_FB PD12 SS1040G 3/14 B 24A PC174 0.1u_25V_X7R_06 FBVDDQ PL8 CMME063T-R24MS1R197 12A A 3/14 PR45 100K_04 PL7 C 12ACMME063T-R24MS1R197 1V8_AON C 7/29 PC54 C PR310 PD13 PR257 PR256 PR258 PR259 15_1%_06 15_1%_06 15_1%_06 15_1%_06 2.2_1%_06 PR62 PQ27 MDU5693 A PR58 10K_04 SS1040G 0.1u_25V_X7R_06 120K_1%_04 PC176 2200p_50V_X7R_04 DGPU_PW RGD 34 VDD3 5VS FBVDDQ_REFIN PR42 Vout = Vref * (1 + Rtop / Rbot) 1.55V = 0.704V * (1 + (24.3K/20K)) 1.35V = 0.6096V * (1 + 24.3k/20K) 3/14 PC138 10u_6.3V_X5R_06 40.2k change to 78.8k (power change) PR236 2K_04 PR410 *2K_04 NV_FBVDDQ_EN D 10K_04 PR37 *0_04 PQ5A from NV H = 1.55V L = 1.35V S MTDK3S6R 3/14 ADD follow NV ℔⚾ D G GPIO8_MEM_VDD_CTL PQ5B MTDK3S6R D ᙔ!Ϻ!ႝ!တ!!DMFWP!DP/ 9/30 *10K_1%_04 55,63,64 PW R_SRC_NV_FB 12,13,32,40,41,49,50,51,52,63,64 5VS 15,16,17,18,19,20,21,22,24,28 FBVDDQ 13,14,24,25,27,28,29,54,55,63,64 1V8_AON 5,27,30,33,36,38,39,42,44,48,50,51,52,53,54,55,56,58,61,62,63 VDD3 0.01u_50V_X7R_04 9/30 Title Size A3 Date: PC140 *10u_6.3V_X5R_06 PR41 S PC41 G PQ17 2SK3018S3 PC45 *0.01u_50V_X7R_04 G D 27 D PR38 *1K_1%_04 PQ18 QM3006M3 78.7K_1%_04 S PR36 5 5 1V8_AON 1V8_AON [66] FBVDDQ(Power) Document Number P955HQx Rev D03 6-71-P9500-D03 Friday, June 23, 2017 Sheet 66 of 74 FBVDDQ B - 67 B.Schematic Diagrams EMI FBVDDQ_REFIN *25TQC15MYFB 40.2K_1%_04 phase ᶵᶲẞ (power check) 3/18 10K_04 PR80 4.7u_25V_X7R_08 0.1u_50V_Y5V_06 0_04 change to 10k (power change) 4.7u_25V_X7R_08 1u_6.3V_X5R_04 PR84 3/14 PC182 + *0_04 41.2k change to 40.2k (power change) PC180 PR61 PC63 3/14 PC179 4.99K_1%_04 PC49 1V8_AON PR90 2A Schematic Diagrams LAN Board LAN Board Sheet 67 of 74 LAN Board L_AVDD33 2.49K_1%_04 *1K_04 LGND RTL8111G-CG L_VDD10 LC8 LC6 LR3 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 PIN11 *15mil_short LGND LGND L_VDDREG/VDD33 LC13 Cc L_VDD10 60 mil LC25 LC24 *4.7u_6.3V_X5R_06 *0.1u_16V_Y5V_04 (>60mil) 0.1u_16V_Y5V_04 LGND L_VDD10 LC22 LC23 *4.7u_6.3V_X5R_06 L_VDD10 LGND D *0.1u_16V_Y5V_04 LGND LGND LC5 LC15 LC21 0.1u_16V_Y5V_04 *1u_6.3V_X5R_04 0.1u_16V_Y5V_04 PIN22 PIN22 PIN30 LGND LGND LGND L_REGOUT W>40mil 24 23 22 21 20 19 18 17 REG_OUT VDDREG DVDD10 LANWAKEB ISOLATEB PERSTB HSON HSOP QFN32 C LC12 L_VDD10 32 31 30 29 28 27 26 25 MDIP0 MDIN0 AVDD10 MDIP1 MDIN1 MDIP2 MDIN2 AVDD10 L_VDD10 LC4 L_VDD10 *20mil_06 LL1 *UHP252012NF-2R2M L_LED2 AVDD33 RSET AVDD10 CKXTAL2 CKXTAL1 LED0 LED1/GPO LED2 E_PAD L_VDD10 LC10 L_LED1/GPO LC16 FOR S5 WAKE UP ON LAN LR6 10K_04 L_AVDD33 L_REGOUT L_VDDREG/VDD33 L_VDD10 *0.1u_16V_Y5V_04 LGND L_LAN_W AKEUP# L_ISOLATEB L_PERSTB LR8 L_RTL8111G_HSON LC14 L_RTL8111G_HSOP LC11 MDIP3 MDIN3 AVDD33 CLKREQB HSIP HSIN REFCLK_P REFCLK_N L_VDD10 LR15 LR5 1K_04 L_3.3VS 15K_1%_04 LGND L_BUF_PLT_RST# L_PCIE_RXN4_GLAN L_PCIE_RXP4_GLAN meet realtek Freq tolerance 50ppm L_XTAL1 LR1 LR2 LC9 L_3.3VS 10K_04 TD4TD4+ TD3TD3+ MX4MX4+ MX3MX3+ TD2TD2+ TD1TD1+ MX2MX2+ MX1MX1+ TCT4 TCT3 TCT2 TCT1 MCT4 MCT3 MCT2 MCT1 19 20 22 23 L_LMX3L_LMX3+ L_LMX4L_LMX4+ 15 18 21 24 L_NMCT_4 L_NMCT_3 L_NMCT_2 L_NMCT_1 L_EML4 LGND L_J_RJ1 L_DLMX1+ L_DLMX1- L_DLMX2+ L_DLMX2- L_DLMX2- L_DLMX2+ *W CM2012F2S-SHORT DA+ DADB+ DB- shield shield GND1 GND2 10 LC19 L_EML3 L_DLMX3- L_DLMX3+ L_DLMX3- L_DLMX4+ L_DLMX4- L_DLMX3+ *W CM2012F2S-SHORT L_DLMX44 L_EML1 DC+ DCDD+ DDC10202-10839-L L_DLMX4+ *W CM2012F2S-SHORT MAIN 6-20-B4J00-008 C LR11 LR12 LR13 LR14 75_1%_04 75_1%_04 75_1%_04 75_1%_04 L_NMCT_R LC20 LC3 *100P_50V_NPO_04 100PF 2KV 1206 LGND LGND LX1 FSX3L 25MHZ 10p_50V_NPO_04 L_DLMX1- 1M_04 LGND L_EML2 L_DLMX1+ *W CM2012F2S-SHORT L_LMX1L_LMX1+ L_LMX2L_LMX2+ NS892402 0.01u_16V_X7R_04 L_XTAL2 L_CLK_REQ4_LAN# 13 14 16 17 LGND L_LAN_MDIN2 L_LAN_MDIP2 L_LAN_MDIN3 L_LAN_MDIP3 40 mil L_PCIE_TXN4_GLAN L_PCIE_TXP4_GLAN L_AVDD33 L_LAN_MDIN0 12 L_LAN_MDIP0 11 L_LAN_MDIN1 L_LAN_MDIP1 L_LAN_W AKEUP# *0402_short 0.1u_10V_X7R_04 0.1u_10V_X7R_04 GIGA LAN LL57 L_PCIE_W AKE# A RB751S-40C2 LR7 LR9 L_CLK_SRC4_GLAN# L_CLK_SRC4_GLAN L_LAN_MDIP3 L_LAN_MDIN3 C LD1 capacitors must be close to pin side 10 11 12 13 14 15 16 B.Schematic Diagrams L_VDD10 LGND L_LAN_MDIP0 L_LAN_MDIN0 L_LAN_MDIP1 L_LAN_MDIN1 L_LAN_MDIP2 L_LAN_MDIN2 L_RSET L_VDD10 L_XTAL2 L_XTAL1 L_LED0 VDD3:700mA L_AVDD33 Ra LR10 (W>60mil L