Clevo N950TP6 service manual

N950TP6 / N957TP6 Preface Notebook Computer N950TP6 / N957TP6 Service Manual Preface I Preface Notice The company reserves the right to revise this publication or to change its contents without notice Information contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent vendor They assume no responsibility or liability for any errors or inaccuracies that may appear in this publication nor are they in anyway responsible for any loss or damage resulting from the use (or misuse) of this publication This publication and any accompanying software may not, in whole or in part, be reproduced, translated, transmitted or reduced to any machine readable form without prior consent from the vendor, manufacturer or creators of this publication, except for copies kept by the user for backup purposes Preface Brand and product names mentioned in this publication may or may not be copyrights and/or registered trademarks of their respective companies They are mentioned for identification purposes only and are not intended as an endorsement of that product or its manufacturer Version 1.0 December 2017 Trademarks Intel and Intel Core are trademarks of Intel Corporation Windows® is a registered trademark of Microsoft Corporation Other brand and product names are trademarks and /or registered trademarks of their respective companies II Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance and inspection of personal computers It is organized to allow you to look up basic information for servicing and/or upgrading components of the N950TP6 / N957TP6 series notebook PC The following information is included: Chapter 1, Introduction, provides general information about the location of system elements and their specifications Chapter 2, Disassembly, provides step-by-step instructions for disassembling parts and subsystems and how to upgrade elements of the system Preface Appendix A, Part Lists Appendix B, Schematic Diagrams Appendix C, Updating the FLASH ROM BIOS III Preface IMPORTANT SAFETY INSTRUCTIONS Follow basic safety precautions, including those listed below, to reduce the risk of fire, electric shock and injury to persons when using any electrical equipment: Do not use this product near water, for example near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool Avoid using a telephone (other than a cordless type) during an electrical storm There may be a remote risk of electrical shock from lightning Do not use the telephone to report a gas leak in the vicinity of the leak Use only the power cord and batteries indicated in this manual Do not dispose of batteries in a fire They may explode Check with local codes for possible special disposal instructions This product is intended to be supplied by a Listed Power Unit as follows: Preface • AC Input of 100 - 240V, 50 - 60Hz, DC Output of 19.5V, 11.8A (230 Watts) minimum AC/DC Adapter FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions: This device may not cause harmful interference This device must accept any interference received, including interference that may cause undesired operation IV Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged To prevent this, follow these suggestions: Don’t drop it, or expose it to shock If the computer falls, the case and the components could be damaged Do not expose the computer to any shock or vibration Do not place it on an unstable surface Do not place anything heavy on the computer Keep it dry, and don’t overheat it Keep the computer and power supply away from any kind of heating element This is an electrical appliance If water or any other liquid gets into it, the computer could be badly damaged Do not leave it in a place where foreign matter or moisture may affect the system Don’t use or store the computer in a humid environment Do not place the computer on any surface which will block the vents Preface Do not expose it to excessive heat or direct sunlight Follow the proper working procedures for the computer Shut the computer down properly and don’t forget to save your work Remember to periodically save your data as data may be lost if the battery is depleted Do not turn off the power until you properly shut down all programs Do not turn off any peripheral devices when the computer is on Do not disassemble the computer by yourself Perform routine maintenance on your computer V Preface Avoid interference Keep the computer away from high capacity transformers, electric motors, and other strong magnetic fields These can hinder proper performance and damage your data Take care when using peripheral devices Use only approved brands of peripherals Unplug the power cord before attaching peripheral devices Preface Power Safety The computer has specific power requirements:  VI • • Power Safety Warning • Before you undertake any upgrade procedures, make sure that you have turned off the power, and disconnected all peripherals and cables (including telephone lines and power cord) It is advisable to also remove your battery in order to prevent accidentally turning the machine on • • • Only use a power adapter approved for use with this computer Your AC adapter may be designed for international travel but it still requires a steady, uninterrupted power supply If you are unsure of your local power specifications, consult your service representative or local power company The power adapter may have either a 2-prong or a 3-prong grounded plug The third prong is an important safety feature; not defeat its purpose If you not have access to a compatible outlet, have a qualified electrician install one When you want to unplug the power cord, be sure to disconnect it by the plug head, not by its wire Make sure the socket and any extension cord(s) you use can support the total current load of all the connected devices Before cleaning the computer, make sure it is disconnected from any external power supplies Do not plug in the power cord if you are wet Do not use the power cord if it is broken Do not place heavy objects on the power cord Preface Battery Precautions • Only use batteries designed for this computer The wrong battery type may explode, leak or damage the computer • Do not continue to use a battery that has been dropped, or that appears damaged (e.g bent or twisted) in any way Even if the computer continues to work with a damaged battery in place, it may cause circuit damage, which may possibly result in fire • Recharge the batteries using the notebook’s system Incorrect recharging may make the battery explode • Do not try to repair a battery pack Refer any battery pack repair or replacement to your service representative or qualified service personnel • Keep children away from, and promptly dispose of a damaged battery Always dispose of batteries carefully Batteries may explode or leak if exposed to fire, or improperly handled or discarded • Keep the battery away from metal appliances • Affix tape to the battery contacts before disposing of the battery • Do not touch the battery contacts with your hands or metal objects Battery Guidelines Preface The following can also apply to any backup batteries you may have • If you not use the battery for an extended period, then remove the battery from the computer for storage • Before removing the battery for storage charge it to 60% - 70% • Check stored batteries at least every months and charge them to 60% - 70%  Battery Disposal The product that you have purchased contains a rechargeable battery The battery is recyclable At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream Check with your local solid waste officials for details in your area for recycling options or proper disposal Caution Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Discard used battery according to the manufacturer’s instructions Battery Level Click the battery icon in the taskbar to see the current battery level and charge status A battery that drops below a level of 10% will not allow the computer to boot up Make sure that any battery that drops below 10% is recharged within one week VII Preface Related Documents You may also need to consult the following manual for additional information: User’s Manual on CD/DVD This describes the notebook PC’s features and the procedures for operating the computer and its ROM-based setup program It also describes the installation and operation of the utility programs provided with the notebook PC System Startup Preface  Powering the Computer On After every disassembly, make sure that the bottom case’s screws are all inserted and tightened before opening the Lid/LCD and turning the computer on Remove all packing materials Place the computer on a stable surface Insert the battery and make sure it is locked in position Securely attach any peripherals you want to use with the computer (e.g keyboard and mouse) to their ports When first setting up the computer use the following procedure (as to safeguard the computer during shipping, the battery will be locked to not power the system until first connected to the AC/DC adapter and initially set up as below): •Attach the AC/DC adapter cord to the DC-In jack on the right of the computer, then plug the AC power cord into an outlet, and connect the AC power cord to the AC/DC adapter and leave it there for seconds or longer •Remove the adapter cord from the computer’s DC-In jack, and then plug it back in again; the battery will now be unlocked Use one hand to raise the lid/LCD to a comfortable viewing angle (do not exceed 130 degrees); use the other hand (as illustrated in Figure 1) to support the base of the computer (Note: Never lift the computer by the lid/LCD) Press the power button to turn the computer “on” Figure 130° Opening the Lid/LCD/ Computer with AC/DC Adapter Plugged-In  Shut Down Note that you should always shut your computer down by choosing the Shut down command in Windows (see below) This will help prevent hard disk or system problems Click the Start Menu icon Click the Power item Choose Shut Down from the menu VIII Schematic Diagrams AC_In, Charger SMART CHARGER TI24780S A A A A PD22 MDL914S2 VDD3 C C PD23 MDL914S2 PR578 287K_1%_04 EML1 HCB2012KF-800T80 VIN ILIM 45.3K_1%_04 VIN PC124 5 5 5 5 3 PRS7 0.01_1%_32 PR179 10K_1%_04 [54] PSYS 0_04 VDD3 PC148 PC146 0.1u_25V_X7R_06 PC147 0.1u_25V_X7R_06 0_04 SMC_BAT PR191 0_04 PQ29 MTE1K0P15KN3 S D BATVLT V_BAT VDD3 PR187 C C BAT_DET SMC_BAT [48] SMD_BAT [48] BA05N16BA0075 6-21-D34P0-105 PC149 4700p_50V_X7R_04 VDD3 PR185 10K_1%_04 SMD_BAT A A PC142 *10u_25V_X5R_08 SS1040WG PC140 PD14 SS1040WG PC139 10u_25V_X5R_08 [48] PD11 PR181 2.2_06 PR188 100K_04 G *0_04 PR184 100p_50V_NPO_04 PR182 D01A 0928 PR180 *10K_1%_04 B HCB1005KF-121T20 HCB1005KF-121T20 PL12 PC145 100p_50V_NPO_04 PL11 30p_50V_NPO_04 PR172 *10mil_short SMC_BAT SMD_BAT 30p_50V_NPO_04 PR174 *10mil_short PC143 0.1u_25V_X7R_06 JBAT1 V_BAT 10u_25V_X5R_08 5 5 5 5 28 27 26 25 24 23 22 29 GND_2 VCC PHASE HIDRV BTST REGN LODRV GND_1 PL10 BCIHP0730-4R7M PQ28 QM3006M3 30p_50V_NPO_04 IDCHG PMON PROCHOT# SDA SCL CMPIN CMPOUT SRP SRN 10_04 PR175 10_04 PR176 10_04 PR177 TB_STAT 10 11 12 13 14 PC138 0.1u_25V_X7R_06 Phase LODRV EMC6 IDCHG HIDRV 0.01u_50V_X7R_04 EMC5 PC334 0.1u_25V_X7R_06 21 20 19 18 17 16 15 PQ27 QM3004M3 EMC9 CMSRC ACDRV ACPRES ACDET IOUT ILIM SRP BQ24780SRUYR SRN BATDRV BATSRC TB_STAT# BATPRES# PQ26 QM3006M3 for EMI 0.1u_25V_X7R_06 470K_04 ACN ACP CMSRC ACDRV ACOK ACDET IADP 0.1u_25V_X7R_06 4.7u_25V_X7R_08 BTST PR170 0_06 PR171 PQ25 QM3006M3 4 PC360 PC137 REGN PU11 4.7u_25V_X7R_08 PC136 2.2u_16V_X5R_06 4.7u_25V_X7R_08 BATDRV D01A_0214 4.7u_25V_X7R_08 PR167 4.02K_1%_04 B PR178 75K_1%_04 PC134 1u_25V_X5R_06 0.1u_25V_X7R_06 2.2u_25V_X5R_08 PR169 4.02K_1%_04 PR168 4.02K_1%_04 PR166 10_1%_06 PC133 0.1u_25V_X7R_06 PC358 PC126 PC127 PC128 PC129 PC130 PC123 PC131 1000p_50V_X7R_04 PC132 0.1u_25V_X7R_06 1000p_50V_X7R_04 PC135 PR165 4.7_04 PR162 *10mil_short 0.1u_25V_X7R_06 PC122 PR580 *10mil_short PC333 1500p_50V_04 PR164 4.7_06 0.047u_25V_X7R_06 PR163 PC359 4.7_06 0.1u_25V_X7R_06 A PD10 MESMAJ20A-G Sheet 57 of 68 AC_In, Charger 0.1u_25V_X7R_06 0.1u_25V_X7R_06 207B07BHB0A 6-20-B3J30-003 PR579 PRS3 WMCSL0612R005FETA G PC362 D01A 0913PC361 PC363 PQ22 G JDC_AC C J_DC_JACK1 GND1 GND2 GND3 GND4 PQ21 MDU1512 MDU1512 VA ULTRASO-8 ULTRASO-8 D01A 0929 D S S D EML2 HCB2012KF-800T80 10u_25V_X5R_08 PR186 300K_1%_04 BAT_VOLT PR190 PC150 60.4K_1%_04 0.1u_16V_X7R_04 [48] D BATGS PR189 10K_04 VDD3 D AC/BATL# [22,57] G PQ31 2SK3018S3 C 0_04 2SK3018S3 PQ30 G 47K_04 PR194 TOTAL_CUR [48] S PR192 S VDD3 C C PC151 100p_50V_NPO_04 PD16 VA C A 10K_04 B PR193 ZD5245BS2 PQ32 E B.Schematic Diagrams VA1 PR195 AC_IN# [48] MMBT3904H M-SC59A 10K_04 AC_IN D D Title [50] VA [30,31,33,36,37,40,42,44,45,48,50,51,52,56,58,59,60,61,62] VDD3 [29,33,50,51,52,53,54,55,56,59,61] VIN B - 58 AC_In, Charger Size A2 Date: [57] AC_IN,CHARGER(Power) Document Number SCHEMATIC1 Rev D01A 6-71-N9500-D01A Friday, October 06, 2017 Sheet 57 of 68 Schematic Diagrams 1V8_MAIN/AON, NV3V3 22u_6.3V_X5R_08 0.1u_10V_X7R_04 GND PU12 0.200 PR209 10_04 *CV-40mil 10 *165K_1%_04 VCC FB SW SW GND GND THERM PC159 1u_6.3V_X5R_04 11 PR211 *0_04 PR212 Rt PR213 20K_1%_04 Rb PR214 10K_1%_04 1V8_RUN 1mm VOUT VOUT M5938BRD1U NV_1V8AON_EN_R PR215 R738 1.8V_RUN_EN 0_04 EN VBIAS 2G 5V Default C965 R1 R739 *10K_04 *0.1u_10V_X7R_04 A C *RB0540S2 D01A C GATE GND 1u_6.3V_X5R_04 D63 D1 [30,31,33,36,37,40,42,44,45,48,50,51,52,56,57,59,60,61,62] [10,21,61] [28,42,43,45,50,53,54,55,56,61,62] [10,19,20,22,23,24,59,60,61,62] [10,11,19,20,24] [2,23,28,29,39,40,41,43,50,51,53,54,61] [10,22,28,61] [8,9,23,26,27,28,29,30,32,33,34,35,36,37,40,41,44,45,46,47,48,49,50,54,59,60,61,62] S MTDK3S6R D Q69B 5G C966 S MTDK3S6R C 6-15-59381-7B0 C967 DEFAULT SHORT *0.01u_16V_X7R_04 U65 NV_NV3V3_EN R743 C968 C969 NV3V3_EN 0_04 PJ59 VIN VOUT VOUT VOUT VOUT EN VBIAS 1mm C970 VDD3 100_04 0.01u_16V_X7R_04 2G MTDK3S6R Q62B 5G MTDK3S6R C972 C D64 *RB0540S2 C1 C973 GATE GND 1u_6.3V_X5R_04 D1 *0.01u_16V_X7R_04 D S D S D A D Q62A 5V R744 *10K_04 R741 R742 100K_04 R1 C971 NV3V3 NV3V3 1A M5938BRD1U 2 10u_6.3V_X5R_06 1A 0_04 10u_6.3V_X5R_06 R740 10u_6.3V_X5R_06 3.3V [23] 0_04 R745 NV3V3_EN Title 6-15-59381-7B0 Size A3 Date: VDD3 PEX_VDD 5V 1V8_AON 1V8_RUN 3.3V NV3V3 3.3VS PR216 1.8V_RUN_EN 0_04 C1 Default Sheet 58 of 68 1V8_MAIN/AON, NV3V3 D Q69A B S MTDK3S6R 100_04 NV_1V8RUN_EN S MTDK3S6R D Q68B 0_04 5G R736 VDD3 D Q68A 2G C964 VOUT 100_04 10u_6.3V_X5R_06 PJ58 R737 100K_04 [23] PC158 GND R734 R735 100K_04 3A VOUT 10u_6.3V_X5R_06 10u_6.3V_X5R_06 B 0_04 VDD3 DEFAULT SHORT PU13 C963 PC157 [58] 1V8_MAIN, 1V8_AON , NV3V3 Document Number SCHEMATIC1 Rev D01A 6-71-N9500-D01A Friday, October 06, 2017 Sheet 58 of 68 1V8_MAIN/AON, NV3V3 B - 59 B.Schematic Diagrams 1V8_RUN C962 PC156 *3300p_50V_X7R_04 1.8V= 0.6 * (1+(20K/10K)) VIN 3A GND Vout= Vref * (1+(Rt/Rb)) PU12_SW PC160 GND 3A 1V8_AON PJ57 3mm RT8071CGQW GND PL13 3A BCIHP0420TB-2R2M 0.1u_10V_X7R_04 0.22u_10V_X5R_04 1V8_AON 1V8_AON_L A PC154 *0.01u_16V_X7R_04 PU12_BOOT 22u_6.3V_X5R_08 0_04 BOOT/NC 22u_6.3V_X5R_08 PR210 NV_1V8AON_EN EN/FS PJ56 PC155 [23] PR208 GND VIN PGOOD OpenVReg NV_1V8AON_EN_R 3.3V 1V8_AON_PW RGD 1.8V/1.6A [23] A 1V8_AON PR206 10K_1%_04 10K_04 1V8_AON PC153 PR205 10_06 PR207 GND PC152 3.3V Open VREG Type 5V GND Schematic Diagrams NVVDD Phase 1-3 PJ60 *CV-40mil PR217 4.7K_04 1V8_AON NVVDD FOR N17_VGA NVVDD_EN PR220 16.5K_1%_04 PR260 UGATE1 BOOST1 EN REFIN VID 499_1%_04 PH1_UPI_9509 PR257 499_1%_04 15K_1%_04 1u_6.3V_X5R_04 PH2_UPI_9509 UGATE2 PGOOD BOOT2 18 17 16 EMI D1 PR253 UGATE2_UPI_9509 0_04 PC190 0_04 0.1u_25V_X7R_06 D1 INS28132620 MLP08 COMMON G1 S1 PR254 100K_04 2 INS28131838 MLP08 COMMON G1 S1 PQ36 CSD87350Q5D D2 PQ37 CSD87350Q5D S PC375 + PL15 CMMS104T-R22MS 33A PD18 G2 S2 PR266 3.3VS PC184 D2 G2 S2 PC185 *0_04 PR263 CSOD140BSH PR262 PR267 10K_04 0_04 Colay 5VS PC181 19 PR265 C B 20 LGATE2 PHASE2 UGATE2_UPI_9509 ISEN1 ISEN3 GND ISEN2 15 14 13 25 PR255 + *330U_2V_D2_D PR259 *15.8K_1%_04 PH2_UPI_9509 + 330U_2V_D2_D PC189 *4700p_50V_X7R_04 1000p_50V_X7R_04 2.2_06 + *330U_2V_D2_D PR252 *100K_04 PC188 PR245 + PC175 1K_04 *CV-40mil PVCC_UPI_9509 + *25TQC15MYFB PR250 21 PVCC FB COMP PW R_SRC_NV 4.7u_25V_X7R_08 100_04 PJ62 FBRTN 220p_50V_NPO_04 PC180 12 PC176 330U_2V_D2_D 11 5.1_06 0.1u_50V_Y5V_06 PR249 NVVDD 10 PR240 66A PC179 UP9509_FBDRTN PC182 *33p_50V_NPO_04 PD17 22 PW M3 NVVDD PL14 CMMS104T-R22MS NV_VDD_L 330U_2V_D2_D 0_04 S2 [22] PR231 *10K_1%_04 PC174 100_04 PR247 UP9509PQAG S2 10K_1%_04 23 LGATE1 TON G2 PR241 PH1_UPI_9509 24 PHASE1 33A 4.7u_25V_X7R_08 GPU_NVVDD_SENSE G2 GPIO29_VRDUTY *2SK3018S3 0.6V~1.2V PQ34 CSD87350Q5D D2 *0_04 PQ33 G PC173 0_04 PR246 PR248 *0_04 [24,61] 300K_1%_04 VREF S1 PC186 PR244 PR243 REFADJ INS28131899 MLP08 COMMON G1 PQ35 CSD87350Q5D D2 0.1u_10V_X7R_04 GPU_GND_SENSE 0_04 S1 PC178 [24,61] PR242 UP9509_VREF INS28131727 MLP08 COMMON G1 PR237 100K_04 PC172 0.1u_25V_X7R_06 D1 CSOD140BSH PU14 PW R_SRC_NV UP9509_REFADJ PR238 0_04 PSI *4700p_50V_X7R_04 *0.01u_50V_X7R_04 PR235 0_04 PC171 309_1%_04 B PC177 EMI UGATE1_UPI_9509 PR236 PR225 *30.1K_1%_04 PC371 + *25TQC15MYFB D1 4.7u_25V_X7R_08 *47p_50V_NPO_04 PC372 4.7u_25V_X7R_08 *0_04 0.1u_10V_X7R_04 4.32K_1%_04 + *25TQC15MYFB PC163 PC373 PC167 PR233 PR229 0.1u_25V_X7R_06 PC169 6.19K_1%_04 PR234 Default [22,60] PR223 *10K_04 PR226 NV_VDD_L Colay [61] GPIO6_NVVDD_PSI# PS1_NVVDD_EN D PW R_SRC_NV 1V8_AON 10u_25V_X6S_08 0_04 10u_25V_X6S_08 *0_04 PR228 PC166 *1K_04 PR224 PC165 PR232 UP9509_REFADJ PR227 PC164 PU14_PSI 1V8_AON PR230 20.5K_1%_04 A Default [23,59] C *EEEFZ1E101P EEEFZ1E101P UP9509_VREF PC162 4700p_50V_X7R_04 NV_NVVDD_EN PC254 + 0_04 PC161 *0.1u_10V_X7R_04 PR222 100K_04 0_04 A PC253 + PR219 GPIO0_NVVDD_PWM_VID C [22] A VIN 5.1_06 PC191 220p_50V_NPO_04 C NVVDD_PWRGD [10,23] VDD3 *10u_6.3V_X5R_06 PR268 PR269 PR270 PR271 *15_1%_06 *15_1%_06 *15_1%_06 *15_1%_06 C974 5 5 R746 *2K_04 PQ38 *QM3006M3 NV_NVVDD_EN D PQ39 *2SK3018S3 [23,59] G S B.Schematic Diagrams NVVDD PHASE ~ A Sheet 59 of 68 NVVDD Phase 1-3 C975 *10u_6.3V_X5R_06 [29,33,50,51,52,53,54,55,56,57,61] VIN [30,31,33,36,37,40,42,44,45,48,50,51,52,56,57,58,60,61,62] VDD3 [10,19,20,22,23,24,58,60,61,62] 1V8_AON [10,11,19,20,24,58] 1V8_RUN [8,9,23,26,27,28,29,30,32,33,34,35,36,37,40,41,44,45,46,47,48,49,50,54,60,61,62] 3.3VS [2,23,28,29,39,40,41,43,50,51,53,54,58,61] 3.3V D D [9,26,27,28,45,47,49,50,60] 5VS [61] PW R_SRC_NV [18,24] NVVDD [10,22,28,58,61] NV3V3 Title [59] NVVDD PHASE 1~3 Size Document Number Custom SCHEMATIC1 Date: B - 60 NVVDD Phase 1-3 Rev D01A 6-71-N9500-D01A Friday, October 06, 2017 Sheet 59 of 68 Schematic Diagrams NVVDDS NVVDDS PHASE and PJ63 *CV-40mil PR273 4.7K_04 1V8_AON NVVDDS FOR N17_VGA A [22] PR276 GPIO3_PS_NVVDDS_VID NVVDDS_EN 0_04 PR275 0_04 NV_NVVDDS_EN [23,60] Default A PC192 *0.1u_10V_X7R_04 *1K_04 PR279 *0_04 PW R_SRC_NVVDDS 1V8_AON Colay UP1666_VREF *47p_50V_NPO_04 C *0_04 19 PC206 220p_50V_NPO_04 BOOT2 UGATE2 PGOOD LGATE2 PHASE2 18 17 16 PVCC_UPI_1666 PR297 2.2_06 5VS PR299 PC211 *0_04 1u_6.3V_X5R_04 VDD3 15 14 21 13 COMP A UGATE1 BOOST1 EN PVCC FB 100_04 *CV-40mil FBDRTN 12 20 LX1_UPI_1666 PR303 1K_1%_04 C R748 3.3VS PC213 10K_04 NVVDDS_PW RGD [23] PR307 PR308 15_1%_06 15_1%_06 *15_1%_06 C PQ42 QM3006M3 PR313 [23,60] D PQ43 2SK3018S3 PR312 PR306 15_1%_06 *4700p_50V_X7R_04 1000p_50V_X7R_04 G NV_NVVDDS_EN 51K_1%_04 C977 *10u_6.3V_X5R_06 S *15.8K_1%_04 PR305 15_1%_06 R747 2K_04 C976 *10u_6.3V_X5R_06 PC212 PR304 5 5 10 0_04 PJ65 LGATE1 FS/OC 11 PC210 *33p_50V_NPO_04 PHASE1 UP1666QQKF GND PR300 PR302 NVVDDS VREF + 330U_2V_D2_D GPU_VDDS_SENSE REFADJ UP1666_FBDRTN PR301 *0_04 [24] + Sheet 60 of 68 NVVDDS PC209 100_04 UP1666_VREF + 330U_2V_D2_D 0_04 PR298 UP1666_REFADJ 51K_1%_04 5.1_06 *330U_2V_D2_D PR296 PR295 PR290 PC208 GPU_GNDS_SENSE 0_04 S2 PD19 B 20A 0.1u_10V_X7R_04 [24] *0.01u_50V_X7R_04 PR294 G2 PR292 NVVDDS PL16 CMMS104T-R22MS 20A PC205 82K_1%_04 PC207 D2 PQ40 CSD87350Q5D PC204 PR293 UP1666_VREF PC203 0.1u_25V_X7R_06 0.6V~1.2V S1 PR287 100K_04 CSOD140BSH PU15 PR288 0_04 PSI *4700p_50V_X7R_04 VID 309_1%_04 REFIN B INS28134302 MLP08 COMMON G1 0_04 PC202 PC377 + PR315 0_04 D D [61] PW R_SRC_NVVDDS [30,31,33,36,37,40,42,44,45,48,50,51,52,56,57,58,59,61,62] VDD3 [10,19,20,22,23,24,58,59,61,62] 1V8_AON [10,11,19,20,24,58] 1V8_RUN [8,9,23,26,27,28,29,30,32,33,34,35,36,37,40,41,44,45,46,47,48,49,50,54,59,61,62] 3.3VS [2,23,28,29,39,40,41,43,50,51,53,54,58,61] 3.3V [10,22,28,58,61] [9,26,27,28,45,47,49,50,59] [18,24] NV3V3 5VS NVVDDS Title Size A3 Date: [60] NVVDDS Document Number SCHEMATIC1 Rev D01A 6-71-N9500-D01A Friday, October 06, 2017 Sheet 60 of 68 NVVDDS B - 61 B.Schematic Diagrams UGATE1_UPI_1666 PR286 D1 EMI PR284 PC197 *25TQC15MYFB D02 0417 4.7u_25V_X7R_08 1u_6.3V_X5R_04 4.32K_1%_04 16.5K_1%_04 PC196 0.1u_50V_Y5V_06 PR283 PR281 0_04 PC194 20.5K_1%_04 PC200 6.19K_1%_04 PR285 [22,59] PR280 PR282 UP1666_REFADJ GPIO6_NVVDD_PSI# 4.7u_25V_X7R_08 D02 0508 PU15_PSI PC195 PC193 4700p_50V_X7R_04 PR278 Schematic Diagrams PEX_VDD PC214 PU16 0.200 BOOT/NC PC216 *0.01u_16V_X7R_04 PC217 VCC PEX_VDD 1u_6.3V_X5R_04 FB GND PC218 PU16_SW PR322 RT8071CGQW GND A PJ67 3mm 11 PC222 *0_04 PR323 PC219 0_04 *3300p_50V_X7R_04 PC220 0.1u_10V_X7R_04 22u_6.3V_X5R_08 PC221 PL17 PEX_VDD_R 1 BCIHP0420TB-2R2M PU16_BOOT 22u_6.3V_X5R_08 SW SW GND GND THERM *0.22u_10V_X5R_04 PEX_VDD_R VDD3 GND Rt PR324 7.5K_1%_04 Rb PR325 10K_1%_04 PR394 PR393 15_1%_06 *15_1%_06 R750 100K_04 GND 1.050V= 0.6 * (1+(7.5K/10K)) PR326 PS6_FB_RR_PEXVDD Q44B MTDK3S6R S D 5G PWR_SRC_NV_FB D 2G PS6_FB_MARGIN_PEXVDD *10_1%_04 PEXVDD_EN Sheet 61 of 68 PEX_VDD Q44A MTDK3S6R Vout= Vref * (1+(Rt/Rb)) [23] S D02 0511 VIN PC223 EEEFZ1E101P NV3V3 + B.Schematic Diagrams *165K_1%_04 OpenVReg EN/FS PJ66 NV_PEXVDD_EN PR319 GND VIN PGOOD PR321 *CV-40mil 0_04 10 GND A 2.6Amps @ 1.0V GND 10K_04 PEXVDD_EN PR317 10K_1%_04 0.1u_10V_X7R_04 PEX_VDD_PWRGD 1.1V/1.4A GND PR318 3.3VS PR320 10K_04 PEX_VDD PC215 PR316 10_06 22u_6.3V_X5R_08 3.3V Open VREG Type 5V 0.400 10A 1V8_AON 1V8_MAIN NVVDD B GC6_FB_EN SCAR250-1 10A PWR_SRC_VINP_R PR328 SMDRL1632L4-R005-FNH COMMON 1206 1% GND PR331 PWR_SRC_VINN_R 0.400 PRS5 PR333 10_1%_04 PR329 10_1%_04 665K_1%_04 PRS6 EN PGOOD VIN2P VIN2P A0 I2CC_SCL PWR_SRC_IMON_A0 I2CC_SCL [22,61] I2CC_SDA [22,61] 10_1%_04 10u_6.3V_X5R_06 14 VIN2N VIN3P VIN3N WARN CRIT PR335 10K_04 1206 GND PR340 10_1%_04 Place resistors close to IC VIN2N VIN3P PC227 665K_1%_04 10_1%_04 10u_6.3V_X5R_06 PV TC VPU 10 13 16 PWR_SRC_VALID SNN_TC SNN_VPU GND PAD PR341 10K_04 INA3221AIRGV PWR_SRC_WARN PR342 PR343 10K_04 PWR_SRC_CRTCAL PR344 17 0_04 0_04 *0_04 PS1_NVVDD_EN PS1_NVVDD_EN [59] [10,19,20,22,23,24,58,59,60,62] 1V8_AON [60] PWR_SRC_NVVDDS [59] PWR_SRC_NV [62] PWR_SRC_NV_FB [10,21] PEX_VDD [29,33,50,51,52,53,54,55,56,57,59] VIN [2,23,28,29,39,40,41,43,50,51,53,54,58] 3.3V [28,42,43,45,50,53,54,55,56,58,62] 5V [10,11,19,20,24,58] 1V8_RUN [10,22,28,58] NV3V3 [30,31,33,36,37,40,42,44,45,48,50,51,52,56,57,58,59,60,62] VDD3 [8,9,23,26,27,28,29,30,32,33,34,35,36,37,40,41,44,45,46,47,48,49,50,54,59,60,62] 3.3VS GPIO28_OC_WARN# [22] VIN3N 1V8_AON PR338 GND GC6 2.1 - VR Complex GPU_PWR_EN 1V8_MAIN_EN GC6_FB_EN 1V8_AON DG P.93 N17E PGOOD EN EN 1V8_MAIN_EN VIN1N 15 B GND *0_04 POWER RAIL 1V8_AON GPU 11 PWR_SRC_VINN 0.01u_16V_X7R_04 PR332 GND PWR_SRC_NVS_VINNP_R SMDRL1632L4-R005-FNH COMMON PR339 GC6 2.1 Control Signals 1.1V8_MAIN_EN 2.GC6_FB_EN 3.GPU_EVENT# 4.GPU_PEX_RST_HOLD# 5.SYS_PEX_RST_MON# GPU_PEX_RST# PR336 PR337 PWR_SRC_NVS_VINN_R C PWR_SRC_NV_FB 1% GPU_PEX_RST_HOLD# GPU_PWR_EN (SYSTEM) 10A PC226 GND PWR_SRC_NV_VINN_R EC/PCH VS SCL SDA VIN1P 1206 PWR_SRC_NVVDDS 0.400 SYS_PEX_RST_MON# PC224 I2CC_SDA PWR_SRC_NV_VINP_R SMDRL1632L4-R005-FNH PR334 COMMON 1% GPU_PWR_EN GPU_EVENT# GPU_RST# PLATFORM_RST# 665K_1%_04 PR330 *10K_04 PC225 12 PWR_SRC_NV_FB PWR_SRC_NV 10A GPU NV3V3 PU17 PWR_SRC_VINP 10_1%_04 10u_6.3V_X5R_06 NVVDDS PEX&1.05V FBVDD/Q VR Complex 1V8_MAIN_EN GND 0.400 PRS4 PGOOD note: t1(from 1V8_RUN_EN to PEX_VDD/NVVDD_PG) must NOT exceed 4ms POWER ON SEQUENCE POWER OFF SEQUENCE PEX&1.05V 1V8_MAIN GPPG8_PCH_1V8RUN_EN (GPP_G8) (1V8_MAIN) EN D 1V8_AON ON 1V8_MAIN OFF PEX&1.05V OFF NVVDD OFF NVVDDS OFF FBVDD/Q ON net PCH_GPIO Voltage DGPU_PWR_EN (GPP_F23) (1V8_AON) PGOOD [24,59] [24,59] GPPG9_PCH_NV3V3_EN (GPP_G9) (NV3V3) [24,62] GPPG10_PCH_NVVDD_EN (GPP_G10) (NVVDD) [22,61] I2CC_SCL [22,61] I2CC_SDA I2CC_SCL I2CC_SDA GPU_GND_SENSE GPU_GND_SENSE GPU_NVVDD_SENSE [24,62] NVVDD C State in GC6 FBVDDQ_SENSE FBVDDQ_SENSE_RTN GPU_NVVDD_SENSE D FBVDDQ_SENSE FBVDDQ_SENSE_RTN GPPG11_PCH_NVVDDS_EN (GPP_G11) (NVVDDS) EN GPPG0_PCH_PEXVDD_EN (GPP_G0) (PEX_VDD) PGOOD FBVDD/Q GC6_FB_EN Title FBVDDQ Date: B - 62 PEX_VDD [61] PEX_VDD Size Document Number Custom SCHEMATIC1 Rev D01A 6-71-N9500-D01A Friday, October 06, 2017 Sheet 61 of 68 Schematic Diagrams FBVDDQ PAGE22: FBVDDQ, and MXM Mounting Holes FBVDDQ PHASE and PJ70 *CV-40mil FBVDDQ_EN PR345 PR346 A 4.7K_04 0_04 1V8_AON NV_FBVDDQ_EN NV_FBVDDQ_EN [23] FBVDDQ FOR N17_VGA Default A PC228 *0.1u_10V_X7R_04 PW R_SRC_NV_FB FBVDDQ_VREF 1K_04 1V8_AON PC229 PC230 1u_6.3V_X5R_04 EMI PR351 UGATE1 0_04 PR352 PR353 100K_04 PC236 0.1u_25V_X7R_06 1.35V FBVDDQ A BOOST1 UGATE1 EN PSI VID REFIN PVCC PR364 2.2_06 5V 1u_6.3V_X5R_04 15 0.1u_50V_Y5V_06 PR368 PC247 0_04 PC244 A PR378 10K_04 DGPU_PW RGD PL19 Rbot1 PR387 20K_1%_04 CMME063T-R24MS1R197 C PQ46 SM7320ESQG 0.1u_25V_X7R_06 PD21 PR375 5.1_06 GND PC249 220p_50V_NPO_04 C FBVDDQ [34] VDD3 Vout = Vref * (1 + Rtop / Rbot) 1.55V = 0.704V * (1 + (24.3K/20K)) 1.35V = 0.6096V * (1 + 24.3K/20K)) PR379 PR380 PR381 PR382 15_1%_06 15_1%_06 15_1%_06 15_1%_06 R751 2K_04 C978 *10u_6.3V_X5R_06 VREFIN PQ48 QM3006M3 D 1V8_AON [24,61] VDDQFB CSOD140BSH 0_04 3.3VS 0_04 FBVDDQ_SENSE PR367 24.3K_1%_04 18A PC248 PR376 C 0_04 PC245 PR374 Sheet 62 of 68 FBVDDQ PR369 100K_04 PR373 51K_1%_04 B PJ72 *CV-40mil PR365 PC242 16 UGATE2 PR372 PR360 100_04 17 *4700p_50V_X7R_04 1000p_50V_X7R_04 *15.8K_1%_04 220p_50V_NPO_04 + 4.7u_25V_X7R_08 BOOT2 LGATE2 PHASE2 18 EMI PC246 + PC240 4.7u_25V_X7R_08 UGATE2 PVCC 21 COMP 5.1_06 PW R_SRC_NV_FB UP1666QQKF FBDRTN FB 19 PR356 PC243 12 LGATE1 FS/OC 14 11 VDDQFB VREF PGOOD 10 FBDRTN 13 100_04 51K_1%_04 GND PR366 PR362 PD20 330U_2V_D2_D 0_04 PR359 30K_1%_04 LX1 330U_2V_D2_D 0_04 PR363 20 PC239 FBVDDQ_VREF *0.01u_50V_X7R_04 PR361 PQ44 SM7320ESQG PHASE1 0.1u_10V_X7R_04 FBVDDQ_SENSE_RTN REFADJ PC237 PC241 FBVDDQ_VREF [24,61] 82K_1%_04 PC238 PR358 36A CMME063T-R24MS1R197 CSOD140BSH PU18 B PL18 18A 649_1%_04 PR354 0_04 5 5 PC235 2200p_50V_X7R_04 VREFIN 0.704V C 10K_1%_04 PR385 10K_1%_04 D S PQ50A MTDK3S6R C979 *10u_6.3V_X5R_06 PC250 *0.01u_16V_X7R_04 G *20mil_short_04 PR389 10K_04 G PQ49 2SK3018S3 2.2K_1%_04 PR390 GPIO8_MEM_VDD_CTL D L = 1.55V H = 1.35V D G PR384 *1K_1%_04 from NV [22] NV_FBVDDQ_EN PR388 1V8_AON S Rbot2 PR386 47K_1%_04 S PQ50B MTDK3S6R D PC251 0.01u_16V_X7R_04 GND GND GND GND GND [8,9,23,26,27,28,29,30,32,33,34,35,36,37,40,41,44,45,46,47,48,49,50,54,59,60,61] 3.3VS [30,31,33,36,37,40,42,44,45,48,50,51,52,56,57,58,59,60,61] VDD3 [10,11,19,20,24,58] 1V8_RUN [10,19,20,22,23,24,58,59,60,61] 1V8_AON [61] PW R_SRC_NV_FB [2,23,28,29,39,40,41,43,50,51,53,54,58,61] 3.3V [28,42,43,45,50,53,54,55,56,58,61] 5V [11,12,13,14,15,16,17,19,24] FBVDDQ Title Date: [62] FBVDDQ Size Document Number Custom SCHEMATIC1 Rev D01A 6-71-N9500-D01A Friday, October 06, 2017 62 Sheet of 68 FBVDDQ B - 63 B.Schematic Diagrams PR350 4.7u_25V_X7R_08 0.1u_50V_Y5V_06 PC233 PC231 4.7u_25V_X7R_08 19.6K_1%_04 PR347 PR348 Schematic Diagrams Audio Board AUDIO BOARD 6-71-N85K8-D02 1AR1 *0_04 4AR1 *0_04 2AR1 *0_04 5AR1 *0_04 3AR1 *0_04 6AR1 *0_04 A_VDD5 A_USBVCC2 USB3.0 CON AU1 60 mil VIN AC4 10u_6.3V_X5R_06 AUSB_DD_ON# VOUT EN# 60 mil AC5 0.1u_10V_X7R_04 GND OC# uP7549UMA5-20 AR1 100K_04 AGND AGND AD1 D AGND A_5V AUSB3_TX3_N AUSB3_TX3_P A_VDD5 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 C 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 AC26 AC27 AGND AUSB3_TX6N AUSB3_TX6P 0.1u_10V_X7R_04 0.1u_10V_X7R_04 10 *220u_6.3V_6.3*4.4 AGND AUSB3_TX3_N_C AUSB3_TX3_P_C AC1 22u_6.3V_X5R_08 AC2 0.1u_10V_X7R_04 AGND AC3 D 22u_6.3V_X5R_08 60 mil AJ_USB2 DT1140-04LP-7 AUSB3_TX3_P_C AD2 AUSB_PN3 AUSB2_PP3 *WCM2012F2S-161T03-short AUSB3_RX3P AL2 AUSB3_RX3N *WCM2012F2S-161T03-short AUSB3_RX3_P AUSB3_RX3_N AUSB_PP3 AUSB_PN3 AGND AUSB3_TX3_N_C AL1 AUSB_PP3 AUSB_DD_ON# AUSB_PP4 AUSB_PN4 AUSB2_PN3 10 AUSB_PN3_C AUSB_PP3_C AGND AUSB3_RX3_P_C AUSB3_RX3_N_C AUSB3_RX3_P_C AUSB3_RX3_N_C SSTX+ VBUS SSTXDGND D+ SSRX+ GND_D SSRX- DT1140-04LP-7 AGND CLOSE TO CONNECTOR GND1 SHIELD Standard-A B.Schematic Diagrams AJ_AUD1 Sheet 63 of 68 Audio Board AC28 A_USBVCC2 + AGND GND3 SHIELD GND4 SHIELD GND2 SHIELD C19007-90905-L NEW 6-21-B4A30-009 AGND AUSB3_RX3_P AUSB3_RX3_N AUSB3_TX3_N AUSB3_TX3_P A_5V A_USBVCC1 AU2 60 mil AHP_SENSE AMIC_SENSE AMIC1-L AMIC1-R AHEADPHONE-L AHEADPHONE-R AC14 10u_6.3V_X5R_06 AGND VIN VOUT GND EN# USB2.0 CON 60 mil AC15 0.1u_10V_X7R_04 uP7549UMA5-20 AGND AGND C OC# AC9 A_USBVCC1 AGND AGND FP225H-030S10M 6-20-94K20-130 22u_6.3V_X5R_08 AC10 0.1u_10V_X7R_04 AC8 22u_6.3V_X5R_08 AGND 60 mil A_AUDG AJ_USB1 CLOSE TO CONNECTOR AD4 AUSB_PN4 AUSB_PP4 AUSB2_PN4 AUSB2_PP4 AL3 *WCM2012F2S-161T03-short AGND 10 AUSB_PN4_C AUSB_PP4_C AGND AGND DT1140-04LP-7 V+ DATA_L GND2 GND1 DATA_H AGND AGND GND GND2 GND1 GND3 GND4 C107BF-10405-L 6-21-B4430-004 AGND B B AUDIO JACK AJ_MIC1 6-19-31001-004 AMIC_SENSE AMIC1-R AL8 FCM1005KF-121T03 AMIC1-L AL5 FCM1005KF-121T03 6-19-31001-004 AC21 AMIC1-R_R AMIC1-L_R JK06006BQ7648 6-20-B28L0-006 AC22 100p_50V_NPO_04 100p_50V_NPO_04 AH52 BLACK AC18 AHP_SENSE AHEADPHONE-R AR5 82_04 AHEADPHONE-R-R AL6 FCM1005KF-121T03 AHEADPHONE-R_R AHEADPHONE-L AR6 82_04 AHEADPHONE-L-R AL7 FCM1005KF-121T03 AHEADPHONE-L_R AC25 AC24 100p_50V_NPO_04 100p_50V_NPO_04 HEADPHONE Title MTH7_0D2_3 AGND AGND 6-20-B2800-106 2SJ-T351-S23 AGND Size A3 Date: B - 64 Audio Board 0.1u_10V_X7R_04 AC23 0.1u_10V_X7R_04 AGND A_AUDG AGND *0.1u_10V_X7R_04 AC20 A_AUDG JK06006BQ7648 6-20-B28L0-006 BLACK MTH7_0D2_3 *0.1u_10V_X7R_04 AC19 AJ_HP1 6-19-31001-004 AH53 MIC IN A_AUDG Resistor 32 or 33_04 meet WLK Test VT1802P 75_04 A 2 [63] AUDIO BOARD Document Number Rev D02 6-71-N85K8-D02 Friday, October 06, 2017 Sheet 63 of 68 A Schematic Diagrams Power SW Board POWER SW BOARD D 6-71-N85KS-D02 1BR1 *0_04 4BR1 *0_04 2BR1 *0_04 5BR1 *0_04 3BR1 *0_04 6BR1 *0_04 D BH_3.3VS C BPWRBTN# BDGND C Sheet 64 of 68 Power SW Board FP226H-004S10M 6-20-94A40-004 POWER BOTTOM BSW1 BH_3.3VS BR1 820_1%_06 BPWRBTN# T4BJB10BQR 6-53-31500-B41 BDGND POWER BUTTON LED BPWR_LED A B PCBfootprint: TJE-53X-Q B BSW1 BD1 RY-SP190DBW71-5A 6-52-57301-022 C WHITE BDGND A BH50 H7_0D2_3 BH51 H7_0D2_3 BH52 C71D71N A Title BDGND Size A4 BDGND Date: [64] POWER SWITCH BOARD Document Number Rev D02 6-71-N85KS-D02 Friday, October 06, 2017 64 Sheet of 68 Power SW Board B - 65 B.Schematic Diagrams BJ_SW1 Schematic Diagrams Hall Sensor Board HALL Sensor Board 6-71-N85K1-D02 1HR1 *0_04 4HR1 *0_04 2HR1 *0_04 5HR1 *0_04 3HR1 *0_04 6HR1 *0_04 H_VDD3 6-02-09249-LC0 6-02-00248-LC2 OLD Value MH248-ALFA-ESO HU1 VCC HC1 0.1u_10V_X7R_04 H_GND OUT GND AH9249NTR-G1 6-02-09249-LC0 H_GND H_LIDSW# HJ_HALL1 HR2 H_LID_SW# *20mil_short_04 HC2 HD1 *V15AVLC0402 *100p_50V_NPO_04 H_GND H_GND H_LID_SW# *100K_04 C FP226H-004S10M 6-20-94A40-004 HR1 C D H_VDD3 Sheet 65 of 68 Hall Sensor Board B.Schematic Diagrams D H_GND B B HH52 A A Title MTH6_0D2_3 H_GND Size A4 H_GND Date: B - 66 Hall Sensor Board [65] HALL SENSOR BOARD Document Number Rev D02 6-71-N85K1-D02 Friday, October 06, 2017 65 Sheet of 68 Schematic Diagrams Click Board Click Board 1CR1 *0_04 4CR1 *0_04 2CR1 *0_04 5CR1 *0_04 3CR1 *0_04 6CR1 *0_04 6-71-N85K2-D02 D D LIFT KEY NC1 NC2 C_CTPBUTTON_L 6-53-31500-B41 FP215H-004S1BM 6-20-94A30-004 C CSW2 T4BJB10BQR 4 C_CTPBUTTON_R 6-53-31500-B41 C_GND C C_GND Sheet 66 of 68 Click Board C_GND B B D02 0516 A CH53 CH55 MTH7_0D2_3 CH58 CH57 MTH7_0D2_3 MTH7_0D2_8 CH59 H4_2D2_2 C_GND C_GND C_GND C_GND C_GND C_GND A Title MTH7_0D2_8 C_GND C_GND CH60 H5_5B3_2x2_4D3_0x2_2 C_GND C_GND Size A4 Date: [66] CLICK BOARD Document Number Rev D02 6-71-N85K2-D02 Friday, October 06, 2017 66 Sheet of 68 Click Board B - 67 B.Schematic Diagrams CSW1 T4BJB10BQR CJ_TP1 C_CTPBUTTON_L C_CTPBUTTON_R RIGHT KEY Schematic Diagrams Power Sequence N950TP6 POWER ON SEQUENCE VDD3 D 3.372v DD_ON 1.398ms 5.19V VDD5 1.963ms 5.18V 5V 30.459ms 3.348V SLP_SUS# 31.018ms 3.371V B.Schematic Diagrams 3.3VA 31.333ms 1.054V VDD1.0 81.21963ms 3.368V RSMRST 182.725ms 3.369V PWR_BTN 178.754ms 3.372V SUSC# 33.405us 3.372V SUSB# Sheet 67 of 68 Power Sequence 98.177 1.214V VDDQ 255.43us 3.3V DDR1.35V_PWRGD 691.20us 1.032V 1.0V_VCCST C D 595.47us 3.367V 3.3V 703us 1.006V VCCIO C 767us 3.372V 3.3VS 790us 5.18V 5VS 1.234ms 1.033V 1.0DX_VCCSTG 1.248ms 1.213V VCCSFR_OC 2.573ms 3.3V VCCIO_PWRGD 2.578ms 3.367V ALL_SYS_PWRGD 3.062ms 1.17V DDR_VTT_PG_CTRL 3.072ms 0.603V VTT_MEM 3.097ms 1.026V VCCST_PWRGD 4.736ms 3.368V VCORE_PG 4.789ms 3.371V DELAY_PWRGD 4.801ms 3.367V PM_PCH_PWROK 4.823ms 1.05V VCCSA 4.865ms 3.3V VCCGT_PG B B 404.918ms 3.371V SYS_PWROK 407.281ms 3.371V PLT_RST# 410ms 1.213V VCORE 429.802ms 3.371V PM_PWROK A A Title [67] Power Sequencing Size A3 Date: B - 68 Power Sequence Document Number Rev D02 6-71-N85K0-D02 Friday, October 06, 2017 Sheet 67 of 68 Schematic Diagrams Option BOM W/ TPM D U47 C833 C834 C835 C836 R604 R447 R416 W/O TPM SLB9665TT_5.51 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 0.1u_16V_Y5V_04 0.1u_16v_Y5V_04 4.7K_04 10K_04 22_04 R450 W/ USB CHARGER M1 K4G41325FE-HC25 M2 K4G41325FE-HC25 M3 K4G41325FE-HC25 M4 K4G41325FE-HC25 M5 K4G41325FE-HC25 M6 K4G41325FE-HC25 R111 100K R112 100K R113 100K W/O USB CHARGER VRAM 6G M1 K4G80325FB-HC28 M2 K4G80325FB-HC28 M3 K4G80325FB-HC28 M4 K4G80325FB-HC28 M5 K4G80325FB-HC28 M6 K4G80325FB-HC28 R211 100K R212 100K R213 100K W/ AUDIO AMP B A U213 74AHC1G08GW U214 TPA2008D2 D66 RB751S-40H L47 HCB1608KF-121T30 C9950.1u_10V_X7R_04 C9970.1u_10V_X7R_04 C9980.1u_10V_X7R_04 C4930.1u_10V_X7R_04 C4940.1u_10V_X7R_04 C4950.1u_10V_X7R_04 C99622u_6.3V_X5R_08 C9992.2u_6.3V_X5R_04 C496220p_50V_NPO_04 R757100K_1%_04 R758 0_04 R759 0_04 R760 120K_1%_04 R761 7.15K_1%_04 R762 10K_04 R767 0_06 R768 0_06 R769 0_06 R770 0_06 100K_04 R663 10K_04 R539 0_04 R546 0_04 VRAM 3G W/O AUDIO AMP R630 R631 R632 R633 0_06 0_06 0_06 0_06 PC5 PC252 PC12 PC10 C762 C758 C757 C755 C754 C752 C751 C749 C748 C747 C746 C745 C744 C743 C742 C741 C740 C739 C738 C726 PC6 C732 C731 C730 C729 C725 C724 C635 C634 C633 C632 R564 R563 R545 R538 R491 R490 R488 R487 R485 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.1u_10V_X7R_04 0.22u_10V_X5R_04 0.22u_10V_X5R_04 0.22u_10V_X5R_04 0.22u_10V_X5R_04 0.22u_10V_X5R_04 0.22u_10V_X5R_04 0.22u_10V_X5R_04 0.22u_10V_X5R_04 0.22u_10V_X5R_04 0.22u_10V_X5R_04 0.22u_10V_X5R_04 0_04 0_04 0_04 0_04 0_04 0_04 0_04 0_04 0_04 R484 0_04 R483 0_04 R479 0_04 R453 0_04 PR6 0_04 L23 0_06 L22 0_06 PR4 10_06 R517 10K_04 R516 10K_04 R514 10K_04 PR8 10K_1%_04 PR10 10K_1%_04 R481 12.1K_1%_04 C727 12p_50V_NPO_04 R480 1K_04 PC9 1u_6.3V_X5R_04 C760 1u_6.3V_X5R_04 PC8 22u_6.3V_X5R_08 PC7 22u_6.3V_X5R_08 PC13 330p_50V_NPO_04 C759 330p_50V_NPO_04 R513 4.7K_04 R511 4.7K_04 R508 4.7K_04 R505 4.7K_04 R504 4.7K_04 R503 4.7K_04 R502 4.7K_04 R499 4.7K_04 R482 4.7K_04 PC3 4.7u_6.3V_X5R_06 PC2 4.7u_6.3V_X5R_06 C733 4.7u_6.3V_X5R_06 C728 4.7u_6.3V_X5R_06 PR7 7.5K_1%_04 U38 ASM2142 PL1 BCIHP0420TB-2R2M U39 G5016 U37 GD25D10BTIGR D26 RB751S-40H PU1 RT8071CGQW X4 FSX3M 20.0000000M16FAO USB3.0 W/ 3GLTE C7720.1u_10V_X7R_04 C7750.1u_10V_X7R_04 R525 0_04 R526 0_04 R527 0_04 R528 0_04 R535 0_04 R543 0_04 R556 0_04 R557 0_04 R561 0_04 R562 0_04 R534 0_04 J_3G1 NFSB0-S6701-TP40 J_SIM1FLY-160429-02 C686 220u_6.3V_6.3#4.4 C687 0.1u_16V_Y5V_04 C688 0.1u_16V_Y5V_04 C689 470p_50V_X7R_04 C690 0.1u_10V_X7R_04 C691 0.1u_10V_X7R_04 C692 0.1u_16V_Y5V_04 C693 220u_6.3V_6.3#4.4 C694 10u_6.3V_X5R_06 C695 0.1u_16V_Y5V_04 C696 0.01u_16V_X7R_04 C697 1u_6.3V_X5R_04 C698 0.1u_16V_Y5V_04 C699 0.1u_16V_Y5V_04 Q40 MTS3572G6 Q41 2SK3018S3 R456 0_06 R458 10K_04 R461 0_04 R464 10_06 R465 100K_04 R466 330K_04 H44 6-34-N350S-020 RGB LED KB J_RGB1 J_RGB2 U54 R668 C894 C895 C896 WHITE LED 87151-1207G FP215H-004S1BM TLC59116FIRHBR 10K_04 4.7u_25V_X5R_08 0.1u_16V_Y5V_04 1000p_50V_X7R_04 D C Sheet 68 of 68 Option DOM KB J_WHITE 50541-00601-002 U51 NCT3940S-A C883 0.1u_10V_X7R_04 C887 10u_6.3V_X5R_06 B A Title Size Document Number Custom Date: Friday, October 06, 2017 Rev D01A Sheet 68 of 68 Option BOM B - 69 B.Schematic Diagrams U42 SLG55593VTR Q56 2SK3018S3 C766 0.1u_16V_Y5V_04 R523 10K_04 R665 10K_04 R522 0_04 C USB3.1 B.Schematic Diagrams Schematic Diagrams B - 70 BIOS Update Appendix C:Updating the FLASH ROM BIOS To update the FLASH ROM BIOS, you must: • • • • • • • Download the BIOS Go to www.clevo.com.tw and point to E-Services and click E-Channel Use your user ID and password to access the appropriate download area (BIOS), and download the latest BIOS files (the BIOS file will be contained in a batch file that may be run directly once unzipped) for your computer model (see sidebar for important information on BIOS versions) Unzip the downloaded files to a bootable CD/DVD or USB Flash drive Insert a bootable CD/DVD/USB flash drive into the CD/DVD drive/USB port of the computer containing the downloaded files Use a tool such as Winzip or Winrar to unzip all the BIOS files and refresh tools to your bootable CD/DVD/USB flash drive (you may need to create a bootable CD/DVD with the files using a 3rd party software) BIOS Version Make sure you download the latest correct version of the BIOS appropriate for the computer model you are working on You should only download BIOS versions that are V1.0X.XX or higher as appropriate for your computer model Note that BIOS versions are not backward compatible and therefore you may not downgrade your BIOS to an older version after upgrading to a later version (e.g if you upgrade a BIOS to ver 1.0X.05, you MAY NOT then go back and flash the BIOS to ver 1.0X.04) Set the computer to boot from the external drive With the bootable CD/DVD/USB flash drive containing the BIOS files in your CD/DVD drive/USB port, restart the computer and press F2 (in most cases) to enter the BIOS Use the arrow keys to highlight the Boot menu Use the “+” and “-” keys to move boot devices up and down the priority order Make sure that the CD/DVD drive/USB flash drive is set first in the boot priority of the BIOS Press F4 to save any changes you have made and exit the BIOS to restart the computer C - C:BIOS Update Download the BIOS update from the web site Unzip the files onto a bootable CD/DVD/USB Flash Drive Reboot your computer from an external CD/DVD/USB Flash Drive Use the flash tools to update the flash BIOS using the commands indicated below Restart the computer booting from the HDD and press F2 at startup enter the BIOS Load setup defaults from the BIOS and save the default settings and exit the BIOS to restart the computer After rebooting the computer you may restart the computer again and make any required changes to the default BIOS settings  BIOS Update Use the flash tools to update the BIOS Make sure you are not loading any memory management programs such as HIMEM by holding the F8 key as you see the message “EFI Shell” You will then be prompted to give “Y” or “N” responses to the programs being loaded by EFI Shell Choose “N” for any memory management programs You should now see DISK fsX:\> (X is the designated drive number for the CD/DVD drive/USB flash drive) Type the following command: C:BIOS Update fsX:\> Flash.nsh The utility will then proceed to flash the BIOS You should then be prompted to press any key to restart the system or turn the power off, and then on again but make sure you remove the CD/DVD/USB flash drive from the CD/DVD drive/USB port before the computer restarts Restart the computer (booting from the HDD) With the CD/DVD/USB flash drive removed from the CD/DVD drive/USB port the computer should restart from the HDD Press F2 as the computer restarts to enter the BIOS Use the arrow keys to highlight the Exit menu Select Load Setup Defaults (or press F3) and select “Yes” to confirm the selection Press F4 to save any changes you have made and exit the BIOS to restart the computer Your computer is now running normally with the updated BIOS You may now enter the BIOS and make any changes you require to the default settings C-2 ... User’s Manual Information about dri-vers (e.g VGA & audio) is also found in the User’s Manual The manual is shipped with the computer Operating systems (e.g Windows 10, etc.) have their own manuals... /or registered trademarks of their respective companies II Preface About this Manual This manual is intended for service personnel who have completed sufficient training to undertake the maintenance... HDD) .C-2 Introduction Chapter 1: Introduction Overview This manual covers the information you need to service or upgrade the N950TP6 / N957TP6 series notebook computer Information about operating