The effects of firm’s innovation on customer’s loyalty: A case study of Saigon COOP - TRƯỜNG CÁN BỘ QUẢN LÝ GIÁO DỤC THÀNH PHỐ HỒ CHÍ MINH

Although many studies have been conducted before about the innovation factors, consumer perceived value, customer satisfaction, and customer’s loyalty, however, the studies ab[r]

The effects of firm’s innovation on customer’s loyalty: A case study of Saigon COOP

Bui Quang Hung1, Trinh Thuy Anh2*, Nguyen Thi Thu Thao2, Nguyen Pham Kien Minh2 1University of Economics Ho Chi Minh City, Vietnam

2Ho Chi Minh City Open University, Vietnam *Corresponding author: thuyanh@ou.edu.vn

ARTICLE INFO ABSTRACT

DOI:10.46223/HCMCOUJS econ.en.10.1.222.2020

Received: September 16th, 2019

Revised: October 10th, 2019

Accepted: April 20th, 2020

Keywords:

marketing innovation, products/service innovation, social media innovation, customer’s loyalty, customer satisfactions, consumer perceived value

Identifying how the innovation affects the customer’s loyalty via the consumer perceived value and customer satisfactions from products or services provided by the Coopmart Retailers System in Ho Chi Minh City, Vietnam is the purpose of this search This research also draws some suggestions for the firm’s future development The research was conducted through phases: a qualitative pilot study and quantitative analysis The pilot study was conducted with people who are working in Coopmart as department heads, deputy heads, and managers with at least 10 years’ experience The qualitative survey will be distributed in the Ho Chi Minh City Coopmart system’s customers with member cards where 291 valid surveys were qualified for further analysis This research’s insight is the impacts of innovation on the consumer perceived value, which has few focuses from previous studies The outcome of the research has shown different aspects of the innovation to the consumer perceived value and customer satisfactions

1 Introduction

2017) However, to be adapted to the world’s changes earning customers’ loyalty and their interests and satisfactions from commercial markets must be carefully considered There are times many big corporations fail to continue their businesses smoothly or sometimes got bankrupted when fails to achieve customers’ loyalty and satisfaction such as Nokia, Yahoo, United Airlines, Sony and so on (Cox & Rodionova, 2017; Davies & Thompson, 2014; Hof, 2012; Minds, 2018) Once again, it is important to earn customer satisfaction as well as customer’s loyalty to survive the competition in the globalization era There are times wrong decisions in a business move or failed to innovate have shown consequences to the business despite significant good reputations and customer satisfactions such as the Coca Cola, Blockbuster, and Compaq’s failures (Goh, 2017; Smith, 2013) Thus, it is important to know innovation moves ensuring the catch on customer satisfactions and their loyalties guaranteeing the firms’ future development, which is also the aims for Coopmart as well as the main focus of this study In this paper, we aim to evaluate the effect of innovative activities on the consumer perceived values in addition to their satisfaction and loyalty Moreover, this paper tries to research the addressed questions: (1) Which factors represent the corporation’s innovation activities? (2) How innovation factors could affect the consumer perceived value, satisfaction, and loyalty to the corporation? Then this paper could suggest some managerial implications for enhancing innovated activities of the corporation

2 Literature review

2.1 Background theory: Resource-based view theory and innovation

Resource-based theory is an approach to increase the competitive advantage to get firm performance by focusing on resources (Wernerfelt, 1984) Barney (1991) argues that the firm could look inside the company to find the sources of competitive advantage instead of looking at a competitive environment for it Competitive advantage can be gained by offering clients with value, rare, inimitable, and non-substitutable, called VRIN (Eisenhardt & Martin, 2000) Resource-based theory is expanding in the market and forms the competitive advantage and business performance of the firm Thus, innovation is a way to maximize internal resources By doing that, the company has increased its development in terms of business, market, and customer aspects

According to Fontana (2011), innovation aims to make the competitive advantage of firms In terms of competitiveness, innovation helps the firms in sustaining a pattern of continuous changes in the company and how that offering is created and delivered Innovation is an important factor to achieve the business performance of firms, markets, and customers (Gamal, Salah, & Elrayyes, 2011)

2.2 Study concept

2.2.1 Innovation

both customers’ loyalty and perceived values, which also defines how innovation is addressed in this search

When classifying the categories of innovation, Burdon, Mooney, and Al-Kilidar (2015) remarked Foster and Kaplan’s work on innovation’s benchmarks include “Incremental innovation”, “Radical innovation”, and “Transformation innovation” (Burdonet al., 2015; Foster & Kaplan, 2011) Later, main dimensions that generally categorized the innovation on its specific operating fields include “Product/service innovation, process innovation, market innovation and organizational innovation” (Oecd, 2005; YuSheng & Ibrahim, 2019) However, these dimensions recently updated where innovation is divided into “Product Innovation” and “Business Process Innovation” with addressed subcategories for describing Business Process Innovation (OECD & Eurostat, 2018) In the investigating topic, the main key factors of the problem are the incremental innovation in business process innovation with the subcategories are the updates in “marketing and sales” and part of improvements in “production of goods and service” In detail, the innovation key factors in this paper include the innovations in Marketing, Products/Services, and Social Media

2.2.2 Customers’ satisfaction, loyalty, and consumers perceived value

Many scholars often refer satisfaction as the degree that the customers’ expectations fit with the quality and performance of the provided products/services that they received and it is marked as one of the most important core factors, the key of success, the marketing field’s motto, and goal for firms’ future development (E W Anderson & Sullivan, 1993; Kotler & Keller, 2003; Swan & Oliver, 1989) It is believed that customer satisfaction will have a positive effect on repurchasing behaviors on the products or services offered by a specific provider (Chitturi, Raghunathan, & Mahajan, 2008; Mittal & Kamakura, 2001), which was found to be the basis proof for addressing customer’s loyalty (Mittal & Kamakura, 2001; Schneider & Bowen, 1999), and boosting the firm’s image (Hallencreutz & Parmler, 2019; Liat, Mansori, & Huei, 2014) The key drivers of customer satisfactions are believed as “perceived quality, perceived value, and customer expectations” (Cronin Jr & Taylor, 1992; Sivadas & Baker‐Prewitt, 2000) and be measured by the developed indexes reflecting “National Customer Satisfaction dimensions” in various countries (E W Anderson, Fornell, & Lehmann, 1994; Fornell, Johnson, Anderson, Cha, & Bryant, 1996) Thus, the hypotheses for investigating the positive and direct impacts of products and services related innovation, as well as consumer perceived values on customers’ satisfaction are proposed, which is the level of customer’s positive emotional activities toward specific products/services or branches in this context This paper also tests the impact of customer satisfactions on their loyalty to reconfirm the positive direct impact

field Thus, this search aims to study the effects of consumer perceived value with innovation factors on customer loyalty, which is the insight of this research

Customer’s loyalty is believed to have a significant tie with the customer satisfactions, which have been tested many times (Mittal & Kamakura, 2001; Selnes, 1993), and identified as the high level in customers’ preferable in repurchasing products/services compared to the firm’s competitors despite the situation (Kursunluoglu, 2014; Oliver Richard, 1997) Martensen, Gronholdt, and Kristensen (2000) addressed four keys that result in the customer’s loyalty include: the repurchase behavior, price’s changes acceptance, high tendency level in a recommendation, and the resistance to firms’ competitors’ offers, which is confirmed by many scholars (Auh, Bell, McLeod, & Shih, 2007; Fečiková, 2004) Hence, the potential value from the customer’s loyalty is limitless for the firm’s growth In this context, loyalty is defined as the high level of customer’s favorable in supporting a specific branch’s offered products/services besides the neglect of their competitors’ offers

2.2.3 The relationships among innovation, customers’ satisfaction, loyalty, and consumers perceived value

The relationships among innovation and factors represented for customers’ purchasing habits and behaviors have been conducted many times:

Hussain (2016) found the positive impact relationships between the service quality and perceived value to customer satisfaction and brand loyalty, where both of them can be used to predict the future state of customer’s brand loyalty as well as customer satisfaction This study also implies the prediction of brand loyalty from customer satisfaction Moreover, Hussain’s service quality can be identified as our study’s product/service innovation factor Also, a strong impact between service quality and customer loyalty is addressed in the search of Liu, Lee, and Hung (2017) in both direct and indirect ways through customer satisfaction channels where customer satisfaction is believed to have a strong effect on customer’s loyalty in this search

When investigating the impacts among the perceived service quality, customer satisfaction, revisit intentions, further recommendation, and perceived advantage in re-purchasing services, Ažman and Gomišček (2015) confirmed the positive and non-linear in the direct impact relationship from the service quality to the customer satisfaction and later the customer satisfaction will impact the customer’s loyalty through the repurchase habit, word-of-mouth advertisement, and revisit behavior In addition to this, Luarn and Lin (2003) addressed a strong influence from customer satisfaction and perceived values to customer’s loyalty behavior Furthermore, YuSheng and Ibrahim (2019)’s study clarifies the tight impacts of the service innovation on customer satisfaction and the customer’s loyalty

Figure Proposed research model

Although many studies have been conducted before about the innovation factors, consumer perceived value, customer satisfaction, and customer’s loyalty, however, the studies about the details in innovation still be an insightful search for science and there are very few searches about the impact of social media innovation to other factors Furthermore, the impacts from innovation factors to consumer perceived value, although been researched many times, but still not be recorded as the main concern from scholars Thus, the following hypotheses are developed in this context and its proposed model is shown in Figure and listed below:

Hypothesis H1: Marketing innovation has a positive direct impact on consumer perceived value

Hypothesis H2: Marketing innovation has a positive direct impact on customer satisfactions Hypothesis H3: Product innovation has a positive direct impact on consumer perceived

value

Hypothesis H4: Product innovation has a positive direct impact on customer satisfactions Hypothesis H5: Social media innovation has a positive direct impact on consumer perceived

value

Hypothesis H6: Social media innovation has a positive direct impact on customer satisfactions

Hypothesis H7: Consumer perceived value has a positive direct impact on customer satisfactions

Hypothesis H8: Consumer perceived value has a positive direct impact on customer’s loyalty

3 Methodology

The research was divided into two phases in which the first phase was the pilot study with qualitative analysis by face to face interview in a group within 90 minutes with employees for the scale selection and validation for being suited with the retail’s field of study They are working in Coopmart system at the middle and senior management level with at least 10 years’ experience as department heads, deputy heads, and managers At first, there are 29 variables were suggested for the survey, which later were revised and reduced to 27 variables, and divided into factors with measurement is described in Table and used 5-point Likert scales (5 = strongly agree; = strongly disagree) The changes were made on consumer perceived value and customer satisfaction factors Convenient sampling was chosen to conduct the sample collected and the modified factors are shown in Table and Table

Table

Constructed table for the survey data

Construct Measurement

Marketing Innovation (Zuñiga-Collazos & Palacio, 2016)

Seven items were chosen for addressing the marketing innovation factor include updating in: marketing activities, brochure and information, layouts for product visualizing, products on shelves, sale off programs, customer’s service, employees’ attitudes, and service abilities

Products/Services Innovation

(Daragahi, 2017)

Three items represent for this factor include new products/services release rate, time, and high-quality products/services

Social Media Innovation (Samydai, Yaseen, & Dajani, 2018)

The SMI was constructed with four items: flexibility in information searching; sharing information via a social network; positive feedbacks and evaluations from customers to Coopmart’s image and service

Perceived Value

(Yang & Peterson, 2004)

This factor is analyzed through four items: reliability, pricing policy, and discount programs in products/services; addressing products and customers’ support services

Customer satisfaction (Weng, Ha, Wang, & Tsai, 2012)

The customer satisfaction was computed from Coopmart offered products/services on three items: general satisfaction, customers’ attitudes when using products/services, the meets on the customers’ needs

Customer’s Loyalty (Luarn & Lin, 2003)

The customer’s loyalty was addressed by six items: foremost choice, loyalty, encouragement level, proud to be a part of Coopmart, negative information resistance, rate of suggestions for future growth

Source: The research’s data analysis

4 Results

4.1 Sample structure Table

Summarized data for statistical purpose

Construct Classification Number %

Gender Female 209 71.8

Male 81 28.2

Age

Below 20 years old 40 13.7

21-40 years old 119 40.9

41-60 years old 93 32.0

> 61 years old 39 13.4

Education

High school 46 15.8

College 68 23.4

University 135 46.4

Higher Degree 42 14.4

Major

Office staffs 146 50.2

Businessmen 68 23.4

Manufacturer 36 12.4

Others 41 14.1

Source: Data analysis result of the research

From the statistics, the majority of respondents are females who account for over 70 percent of the survey, where approximately 75 percent of Coopmart loyal customers with ages ranging from 21 to 60 Moreover, the total rate of college and university degree holders accumulate for over 70 percent while in the major classification, the total rate of office staff and businessmen are close to 75 percent

4.2 Confirmatory Factor Analysis (CFA)