| Tài liệu tham khảo |
Loại |
Chi tiết |
| [1]. Jeswiet, J., Micari, F., Hirt, G., Bramley, A. N., Duflou, J. R., Allwood, J., “Asymmetric Single Point Incremental Forming of Sheet Metal”. In: CIRP Annals. Vol. 54/2. 2005 |
Sách, tạp chí |
| Tiêu đề: |
Asymmetric Single Point Incremental Forming of Sheet Metal” |
|
| [2]. J. Jeswiet M. Ham, "Forming Limit Curves in Single Point Incremental Forming," CIRP Annals - Manufacturing Technology, vol. 56, no. 1, pp. 277-280, 2007 |
Sách, tạp chí |
| Tiêu đề: |
Forming Limit Curves in Single Point Incremental Forming |
|
| [3]. L. Filice, F. Micari G. Ambrogio, "A force measuring based strategy for failure prevention in incremental forming," Journal of Materials Processing Technology, vol. 177, no. 1-3, pp. 413-416, 2006 |
Sách, tạp chí |
| Tiêu đề: |
A force measuring based strategy for failure prevention in incremental forming |
|
| [4]. G. Ambrogio, F. Micari Filice, "On-Line Control of Single Point Incremental Forming Operations through Punch Force Monitoring," CIRP Annals - Manufacturing Technology, vol. 55, no. 1, pp. 245-248 , 2006 |
Sách, tạp chí |
| Tiêu đề: |
On-Line Control of Single Point Incremental Forming Operations through Punch Force Monitoring |
|
| [5]. V. Cozza, L. Filice, F. Micari G. Ambrogio, "An analytical model for improving precision in single point incremental forming," Journal of Materials Processing Technology, vol. 191, no. 1-3, pp. 92-95, 2007 |
Sách, tạp chí |
| Tiêu đề: |
An analytical model for improving precision in single point incremental forming |
|
| [6]. Y. Tunckol, R. Aerens J. R. Duflou, "Force Analysis for Single Point Incremental Forming," in Sheet Metal 07, 2007, pp. 543-550 |
Sách, tạp chí |
| Tiêu đề: |
Force Analysis for Single Point Incremental Forming |
|
| [7]. D., Green, A. J., Bramley, A. N. Leach, "A new incremental sheet forming process for small batchand prototype parts," in Verlag Meisenbach Bamberg, Germany, 2001, pp. 95-102 |
Sách, tạp chí |
| Tiêu đề: |
A new incremental sheet forming process for small batchand prototype parts |
|
| [8]. G. Hirt, "Tools and Equipment used in Incremental Forming," in 1st Incremental Forming Workshop, University of Saarbrucken, 2004 |
Sách, tạp chí |
| Tiêu đề: |
Tools and Equipment used in Incremental Forming |
|
| [9]. V. Cozza, L. Filice, F. Micari G. Ambrogio, "An analytical model for improving precision in single point incremental forming," Journal of Materials Processing Technology, vol. 191, no. 1-3, pp. 92-95, 2007 |
Sách, tạp chí |
| Tiêu đề: |
An analytical model for improving precision in single point incremental forming |
|
| [10]. F. Micari, "Some remarks on material formability in single point incremental forming of sheet metal," in 8th International Conference on Technology of Plasticity, Verona, 2005 |
Sách, tạp chí |
| Tiêu đề: |
Some remarks on material formability in single point incremental forming of sheet metal |
|
| [11]. David Adams, “Electrically Assisted Single Point Incremental Forming”, Department of Mechanical and Materials Engineering, Queen's University, Kingston, Canada |
Sách, tạp chí |
| Tiêu đề: |
“Electrically Assisted Single Point Incremental Forming” |
|
| [12]. G. Hirt, S. Junk M. Bambach, "Modelling and Experimental Evaluation of the Incremental CNC Sheet Metal Forming Process," in 7th International Conference on Computational Plasticity, Barcelona, 2003 |
Sách, tạp chí |
| Tiêu đề: |
Modelling and Experimental Evaluation of the Incremental CNC Sheet Metal Forming Process |
|
| [13]. Young, D., Ham, M. J. Jeswiet, "Non-traditional Forming Limit Diagrams for Incremental Forming," Journal Advanced Materials Research, vol. 6, no. 8, pp. 409-416, 2005 |
Sách, tạp chí |
| Tiêu đề: |
Non-traditional Forming Limit Diagrams for Incremental Forming |
|
| [14]. Jeswiet, J. D. Young, "Forming Limit Diagrams for Single-Point Incremental Forming of Aluminium Sheet," Journal of engineering manufacture, vol. IMechE, Part B, no. 219/4, pp. 359-364, 2005 |
Sách, tạp chí |
| Tiêu đề: |
Forming Limit Diagrams for Single-Point Incremental Forming of Aluminium Sheet |
|
| [15]. L., Fantini, L., Micari, F. Filice, "Analysis of Material Formability in Incremental Forming," CIRP Annals - Manufacturing Technology, vol.51, no. 1, pp. 199-202 , 2002 |
Sách, tạp chí |
| Tiêu đề: |
Analysis of Material Formability in Incremental Forming |
|
| [16]. S.He, A.Van Bael, P.Van Houtte, and J.Duflou P. Eyckens, "Forming Limit Predictions for the Serrated Strain Paths in Single Point Incrementa lSheet Forming," in 9th International Conference on Numerical Methods in Industrial Forming Processes, AIP Conference Proceedings, 2007, pp. 141-146 |
Sách, tạp chí |
| Tiêu đề: |
Forming Limit Predictions for the Serrated Strain Paths in Single Point Incrementa lSheet Forming |
|
| [17]. A.H. van den Boogaard W.C. Emmens, "An overview of stabilizing deformation mechanisms in incremental sheet forming," Journal of Materials Processing Technology, vol. 209, no. 8, pp. 3688-3695, 2009 |
Sách, tạp chí |
| Tiêu đề: |
An overview of stabilizing deformation mechanisms in incremental sheet forming |
|
| [18]. A.H. van den Boogaard W.C. Emmens, "Incremental forming by continuous bending under tension—An experimental investigation," Journal of Materials Processing Technology, vol. 209, no. 14, pp. 5456-5463, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Incremental forming by continuous bending under tension—An experimental investigation |
|
| [19]. M. Skjoedt, P.A.F. Martins, N. Bay M.B. Silva, "Revisiting the fundamentals of single point incremental forming by means of membrane analysis," International Journal of Machine Tools and Manufacture, Volume 48, Issue 1, January 2008, Pages 73-83, vol. 48, no. 1, pp. 73-83, 2008 |
Sách, tạp chí |
| Tiêu đề: |
Revisiting the fundamentals of single point incremental forming by means of membrane analysis |
|
| [20]. N. Bay, M. Skjoedt and M.B. Silva P.A.F. Martins, "Theory of single point incremental forming," CIRP Annals - Manufacturing Technology, vol. 57, no. 1, pp. 247-252, 2008 |
Sách, tạp chí |
| Tiêu đề: |
Theory of single point incremental forming |
|