| Tài liệu tham khảo |
Loại |
Chi tiết |
| 1. J. Fourier, The Analytical Theory of Heat, Cambridge University Press, 2009 |
Sách, tạp chí |
| Tiêu đề: |
The Analytical Theory of Heat |
|
| 3. H S. Carslaw, Introduction to the mathematical theory of the conduction of heat in solids, Nabu Press (2010) |
Sách, tạp chí |
| Tiêu đề: |
Introduction to the mathematical theory of the conduction of heat in solids |
|
| 4. D. Rosenthal, Mathematical Theory of Heat Distribution during Welding and Cutting, Wed. J. Vol 20 (No. 5) 1941 p 220s–234s |
Sách, tạp chí |
| Tiêu đề: |
Mathematical Theory of Heat Distribution during Welding and Cutting |
|
| 5. D. Rosenthal, The theory of moving sources of heat and its application to metal treatments, Trans. Amer. Soc. Mech. Eng. 68 (1946) 849–866 |
Sách, tạp chí |
| Tiêu đề: |
The theory of moving sources of heat and its application to metal treatments |
|
| 6. Pavelic V, Tanbakuchi R. Uyehar, O. A. Myers P. S 1969, Experimental and computed temperature histories in Gas Tungsten Arc Welding of thin plates, Welding Journalvol. 48 n. 7pp. 29 |
Sách, tạp chí |
| Tiêu đề: |
Experimental and computed temperature histories in Gas Tungsten Arc Welding of thin plates |
|
| 7. Goldak, J Bibby M. Chakravarti A. 1984, A new finite element model for welding heat sources, Metallurgical Transactions B vol. 15B pp. 299 - 305 |
Sách, tạp chí |
| Tiêu đề: |
A new finite element model for welding heat sources |
|
| 8. J. Goldak, M. Bibby, J. Moore, R. House, B. Patel, Computer modeling of heat flow in welds, , Metallurgical Transactions B vol. 17B pp. 587 - 600 |
Sách, tạp chí |
| Tiêu đề: |
Computer modeling of heat flow in welds |
|
| 9. Eager T. W. and Tsai N. S. 1983, Temperature fields produced by traveling distributed heat sources, Welding Journal 62(12)-346-s to 355-s |
Sách, tạp chí |
| Tiêu đề: |
Temperature fields produced by traveling distributed heat sources |
|
| 10. Jeong S. K. and Cho H. S. 1997, An an alytical solution to predict the transient temperature distribution in fillet arc welds, Welding Journal 76(6) 223-s to 232-s |
Sách, tạp chí |
| Tiêu đề: |
An an alytical solution to predict the transient temperature distribution in fillet arc welds |
|
| 11. E. A. Bonifaz, Finite Element Analysis of Heat Flow in Single-Pass Arc Welds, Welding Reaserch Supplement 121-s to 125-s |
Sách, tạp chí |
| Tiêu đề: |
Finite Element Analysis of Heat Flow in Single-Pass Arc Welds |
|
| 12. M.A Wahab, M.J Painter, M.H Davies, The prediction of the temperature distribution and weld pool geometry in the gas metal arc welding process, Journal of Material Process Technology 77 (1998) 233-239 |
Sách, tạp chí |
| Tiêu đề: |
The prediction of the temperature distribution and weld pool geometry in the gas metal arc welding process |
|
| 13. S. Murugan, P.V. Kumar, B. Raj, M.S.C Bose, Temperature distribution during multipass welding of plates, International Journal of Pressure Vessels and Piping 75 (1998) 891-905 |
Sách, tạp chí |
| Tiêu đề: |
Temperature distribution during multipass welding of plates |
|
| 14. Jerzy Winczek, Analytical solution to transient temperature field in a half-infinite body caused by moving volumetric heat source, International Journal of Heat and Mass Transfer 53 (2010) 5774-5781 |
Sách, tạp chí |
| Tiêu đề: |
Analytical solution to transient temperature field in a half-infinite body caused by moving volumetric heat source |
|
| 15. Fang Hongyuan, Meng Qinggou, Xu Wenli, Ji Shude, New general double ellipsoid heat source model, Science and Technology of Welding and Joining 2005 Vol 10 No3 361s-368s |
Sách, tạp chí |
| Tiêu đề: |
New general double ellipsoid heat source model |
|
| 16. N.T. Ninh, A. Ohata, K. Matsuoka, N. Suzuki, Y. Maeda, Analytical solution for transient temperature of semi-infinite body subjectec to 3-D moving heat source, Welding Research suppliment to the welding journal, August 1999, 265-s to 274-s |
Sách, tạp chí |
| Tiêu đề: |
Analytical solution for transient temperature of semi-infinite body subjectec to 3-D moving heat source |
|
| 17. N.T. Ninh, Y.-W. Mai, S. Simpson, A. Ohta, Analytical approximate solution for double ellipsoidal heat source in finite thick plate, Welding Research Mar 2004, 82- s to 93-s |
Sách, tạp chí |
| Tiêu đề: |
Analytical approximate solution for double ellipsoidal heat source in finite thick plate |
|
| 18. Guangming Fu, Parameter determination of double-ellipsoidal heat source model and its application in the multi-pass welding process, Taylor & Francis, Ship and Offshore Structure 10 Jul 2014 |
Sách, tạp chí |
| Tiêu đề: |
Parameter determination of double-ellipsoidal heat source model and its application in the multi-pass welding process |
|
| 19. Aniruddha Ghosh, Critical analysis of moving heat source shape for arc welding process of high deposition rate, Tehnički vjesnik 21, 1(2014), 95-98 |
Sách, tạp chí |
| Tiêu đề: |
Critical analysis of moving heat source shape for arc welding process of high deposition rate |
| Tác giả: |
Aniruddha Ghosh, Critical analysis of moving heat source shape for arc welding process of high deposition rate, Tehnički vjesnik 21, 1 |
| Năm: |
2014 |
|
| 20. J. Dutta, Narendranah S, Experimental and analytical investigation of thermal parameters developed in high carbon stell joints formed by GTA welding, Journal of Mechanical Enginerring, Vol. ME 44, No. 2 Dec 2014 |
Sách, tạp chí |
| Tiêu đề: |
Experimental and analytical investigation of thermal parameters developed in high carbon stell joints formed by GTA welding |
|
| 21. Vũ Đình Toại, Võ Văn Phong, Mô phỏng trường nhiệt độ, trường ứng suất và biến dạng trong quá trình hàn nóng chảy bằng phương pháp phần tử hữu hạn, Tạp chí Khoa học & Công nghệ các trường Đại học Kỹ thuật, Số 57, Hà Nội 2006 |
Sách, tạp chí |
| Tiêu đề: |
Mô phỏng trường nhiệt độ, trường ứng suất và biến dạng trong quá trình hàn nóng chảy bằng phương pháp phần tử hữu hạn |
|