Mục đích của luận án nhằm xây dựng phương pháp thiết kế kỹ thuật trang phục ứng dụng mô phỏng 3 chiều trong sản xuất may công nghiệp. Ứng dụng phương pháp thiết kế mới để thiết kế mẫu kỹ thuật một sản phẩm may.
ign 39, [36] [37] [38] [39] pp.568-582 In Hwan Sul, (2010) “Fast cloth collision detection using collision matrix” International Journal of Clothing Science and Technology Vol 22, pp 145-160 J Mc Cartney, B.K Hinds, B.L Seow, (1999) “The flattenning of trianglated surfaces in corporating darts and gussets”, Coputer-Aided Design 31: 249-260 Jin Wang, Guo-dong Lu, Ji-tuo Li, Long Chen and Dong-liang Zhang (2007), Pattern design on 3D triangular garment surfaces, Journal of Zhejiang University - Science A Volume 8, Number 10, 1642-1649, DOI: 10.1631/jzus.A1642 Jin Wang, Guo-Dong Lu, Wei-Long Li, Long Chen, Yoshiyuki Sakaguti (2009), “Interactive 3D garment design with constrained contour curves and style curves” Computer-Aided Design 41(9): 614-625 [40] Jituo Li, Juntao Ye, Yangsheng Wang, Li Bai, Guodong Lu, (2010) “Fitting 3D garment models onto individual human models”, Computers & Graphics 34, pp 742755 [41] Jun-Ming Lu, Mao-Jiun J Wang, Chien-Wen Chen, Jyi-Hua Wu, (2010) “The development of an intelligent system for customized clothing making” Expert Systems with Applications 37, pp 799-803 [42] Jinlian Hu, (2011) “Computer technology for textiles and apparel”, Woodhead Publishing Series in Textiles: Number 121 143 [43] Jing-Jing Fang, Yu Ding, (2014) "Energy-based optimal darted pattern for garment design", International Journal of Clothing Science and Technology, Vol 26 Issue: 2, pp.164-183 [44] Jun Zhang, Noriaki Innami, KyoungOk Kim, Masayuki Takatera, (2015) "Upper garment 3D modeling for pattern making", International Journal of Clothing Science and Technology, Vol 27 Issue: 6, pp.852-869 [45] Kaixuan Liu, Jianping Wang, Chun Zhu,Yan Hong, (2016) "Development of upper cycling clothes using 3D-to-2D flattening technology and evaluation of dynamic wear comfort from the aspect of clothing pressure", International Journal of Clothing Science and Technology, Vol 28 Issue: 6, pp.736-749 [46] Krzywinski S, Siegmund J, (2017) “3D Product Development for Loose-Fitting Garments Based on Parametric Huma Models”, Journal of Fashion Technology & Textile Engineering S3:005 [47] Li J, Wang Y, (2007) “Automatically constructing skeletons and parametric structures for polygonal human bodies” CGI 2007:151–6 [48] Lutz Walter, George-Alexander Kartsounis, Stefano Carosio (2009), “ Transformer Clothing Production into a Demand-driven, Knowledge-based, High-tech Industry”, Springer Science Business Media [49] Lucie Gaget, (2018) “Top of the best CAD fashion design software” [50] Matthew M F Yuen and C C Chan, (1998) “A Spring–Mass Model-based Approach for Warping Cloth Patterns on 3D Objects”, The journal of Visualization and Computer Animation No 9, 215 - 227 [51] Marzia Fontana, Caterina Rizzi, Umberto Cugini (2005), “3D virtual apparel design for industrial applications” Computer-Aided Design 37: pp 609-622 [52] Marzia Fontana, Caterina Rizzi, Umberto Cugini, (2006) “A CAD-oriented cloth simulation system with stable and efficient ODE solution”, Computers & Graphics 30, pp 391-406 [53] Olga Troynikov and Elnaz Ashayeri, (2011) “3D body scanning method for closefitting garments in sport and medical applications”, HFESA 47th Annual Conference 2011 Ergonomics Australia-Speciaal Edition [54] Olaru Sabinaa , Filipescu Emilia , Avădanei Manuela , Mocenco Alexandra , Popescu Georgeta , Săliștean Adrian, (2015) “Applied 3D Virtual Try-on for Bodies with Atypical Characteristics”, Procedia Engineering, Volume 100, Pages 672-681 [55] P Voline, N.Magnenat-Thalmann, (2013) “Sketch-Based Garment Design with Quad Meshes”, Computer-Aided Design, pages 562-567, ISSN 0010-4485 [56] Slavenka Petrak, Dubravko Rogale, (2006) "Systematic representation and application of a 3D computer‐aided garment construction method: Part I: 3D 144 garment basic cut construction on a virtual body model", International Journal of Clothing Science and Technology, Vol 18 Issue: 3, pp.179-187 [57] Shin-Wen Hsiao, Rong-Qi Chen, (2013) “A study of surface reconstruction for 3D mannequins based on feature curves”, Computer-Aided Design 45, 1426-1441 [58] Sungmin Kim, (2015) "Analysis of human body surface shape using parametric design method", International Journal of Clothing Science and Technology, Vol 27 Issue: 3, pp.434-446 [59] Shuixian Hu, Ruomei Wang, Fan Zhou, (2017) "An efficient multi-layer garment virtual fitting algorithm based on the geometric method", International Journal of Clothing Science and Technology, Vol 29 Issue: 1, pp.25-38 [60] Turquin E, Wither J, Boissieux L, Cani MP, Hughes JF (2007), “A sketch-based interface for clothing virtual characters”, IEEE Comput Graph Appl 2007;27(1):72– 81 [61] [TC]2 2010, 3D Body Scanning & Technology Development, viewed 10 October 2010 [62] Victor Kuzmichev, Aleksei Moskvin,Evgenii Surzhenko, Mariia Moskvina, (2017) "Computer reconstruction of 19th century trousers", International Journal of Clothing Science and Technology, Vol 29 Issue: 4, pp.594-606 [63] Wang C.C.L., Wang Yu, Matthew M.F Yuen, (2002)“Feature based 3D garment design through 2D sketches”, Computer-Aided Design 35, pp 659-672 [64] Wang C.C.L., Shana S -F.Smith, Matthew M.F.Yuen, (2002) “Surface flattening based on energy model”, Computer - Aided Design 34, pp 823-833 [65] Wang C.C.L., Wang Y, Yuen MMF (2005), “Design automation for customized apparel products” Comput Aided Design 37 : pp 675-91 [66] Wang C.C.L., (2005)“Parameterization and parametric design of mannequins” Computer-Aided Design 37: pp 83-98 [67] Wang, Zhaohui (2008) “A study of ease distribution in relation to jacket pattern alteration” Diss The Hong Kong Polytechnic University [68] Wioletta Sybilska, Lidia Napieralska & Elizbieta Mielicka, (2010) “Analysis of measurements using a 3D contactless scanning method”, AUTEX Research Journal, Vol.10, No3 [69] Xiao-Jing Zhou and Zheng-Xu Zhao, (2009) “The skin deformation of a 3D virtual human”, international journal of Automation and Computing, Nov, 344-350 [70] Xuyuan Tao, Pascal Bruniaux, (2013) “Toward advanced three ‐dimensional modeling of garment prototype from draping technique”, International Journal of Clothing Science and Technology, Volume: 25 Issue: 145 [71] Xiaona Chen, Jianping Wang, (2015) "Breast volume measurement by mesh projection method based on 3D point cloud data", International Journal of Clothing Science and Technology, Vol 27 Issue: 2, pp.221-236 [72] Xianyi Zeng, Kaixuan Liu, Yan Chen, Min Dong, Yan Hong (2017) "Virtual reality-based collaborative design method for designing customized garment for disabled people with scoliosis", International Journal of Clothing Science and Technology, Vol 29 Issue: 2, pp.226-237 [73] Yu-Lei Geng, Guo-Dong Lu, Jin Wang, Wei-Long Li, (2009) “Sketch-Based 3D Sleeve Modeling and Reusing Method for Garment CAD”, CSIE (1) : 711-715 [74] Yong-Jin Liu, Dong-Liang Zhang, Matthew Ming-Fai Yuen, (2010), “A survey on CAD methods in 3D garment design”, Computer in Industry 61, 576-593 [75] Yuwei Meng, P.Y Mok, Xiaogang Jin, (2010) “Interactive virtual try-on clothing design systems”, Computer-Aided Design 42, pp 310-321 [76] Yu-Lei Geng, Jin Wang, Guo-Dong Lu, Zheng Liu, Gang Chen, (2011) “Sketch based garment modeling on an arbitrary view of a 3D virtual human model”, Journal of Zhejiang University - Science C 12(3): 195-203 [77] Yuwei Meng, P.Y.Mok, Xiaogang Jin, (2012) “Computer aided clothing patter design with 3D editing and pattern alteration”, Computer - Aided Design 44, 721-734 [78] Yunchu Yang, Fengyuan Zou, Zhong Li, Xiaofen Ji (2011) “Development of a Prototype Pattern Based on the 3D Surface Flattening Method for MTM Garment Production”, FIBRES & TEXTILES in Eastern Europe, Vol 19, No [79] Yuko Mesuda, Shigeru Inui, Yosuke Horiba, (2018) “Virtual draping by mapping”, Computers in Industry, Volume 95, Pages 93-101 [80] https://www.youtube.com/watch?v=S9HoSywsFAw [81] http://jorgeandesther.com/digital-tailoring/ [82] https://www.youtube.com/watch?v=_8URwifetEw 146 DANH MỤC CÁC CƠNG TRÌNH ĐÃ CƠNG BỐ CỦA LUẬN ÁN [1] Lưu Hồng, Ngơ Chí Trung (2016), Xây dựng lưới bề mặt thể người phục vụ thiết kế quần áo chiều, Tạp chí khoa học & Công nghệ, Đại học Sư phạm kỹ thuật Hưng Yên (ISSN 2354-0575), số 11, trang 98-104 [2] Lưu Hoàng, Ngơ Chí Trung (2016), Nghiên cứu xây dựng lưới quần áo chiều dựa lưới bề mặt thể người, Tạp chí Cơ khí Việt Nam, số 10, trang 74-82 [3] Lưu Hồng, Ngơ Chí Trung (2017), Trải phẳng mẫu chi tiết quần áo từ chiều sang chiều phương pháp sử dụng ngơn ngữ lập trình trực quan thiết kế quần áo ứng dụng mô chiều, Tạp chí Cơ khí Việt Nam, số 9, trang 115-125 [4] Lưu Hồng, Ngơ Chí Trung (2017), Xử lý liệu quét mẫu thể người phục vụ thiết kế quần áo chiều, Tạp chí khoa học & Công nghệ, Đại học Sư phạm kỹ thuật Hưng Yên (ISSN 2354-0575), số 16, trang 43-49 [5] Luu Hoang, Ngo Chi Trung (2018), Research on the flattening of the 3D clothing pattern into 2D clothing parts, The first International Conference on Material, Machines and Methods for Sustainable Development (MMS2018), Vol 1, Da Nang, Viet Nam, pp 452459 147 PHỤ LỤC - PHỤ LỤC XỬ LÝ MẪU QUÉT - PHỤ LỤC KẾT QUẢ QUÉT MẪU - PHỤ LỤC MẪU PHIẾU CHUYÊN GIA - PHỤ LỤC HƯỚNG DẪN SỬ DỤNG CHƯƠNG TRÌNH THIẾT KẾ MẪU 148 PHỤ LỤC MẪU PHIẾU CHUYÊN GIA 149 ... phẳng mẫu chi tiết quần áo từ chiều sang chiều phương pháp sử dụng ngơn ngữ lập trình trực quan thiết kế quần áo ứng dụng mô chiều, Tạp chí Cơ khí Việt Nam, số 9, trang 115-125 [4] Lưu Hồng, Ngơ... BỐ CỦA LUẬN ÁN [1] Lưu Hồng, Ngơ Chí Trung (2016), Xây dựng lưới bề mặt thể người phục vụ thiết kế quần áo chiều, Tạp chí khoa học & Cơng nghệ, Đại học Sư phạm kỹ thuật Hưng Yên (ISSN 235 4-0575),... (2017), Xử lý liệu quét mẫu thể người phục vụ thiết kế quần áo chiều, Tạp chí khoa học & Cơng nghệ, Đại học Sư phạm kỹ thuật Hưng Yên (ISSN 235 4-0575), số 16, trang 43- 49 [5] Luu Hoang, Ngo Chi Trung