Al form advantages (english)

ADVANTAGES OF USING Kumkang Kind AL-form system 11/3/19 11/3/19 page 11/3/19 page USING CAD FACILITIES IN DESIGNING 11/3/19 page DESIGNING WALL PANEL LAYOUT DESIGNING BEAM PANEL LAYOUT DESIGNING SLAB CORNER LAYOUT (SC) DESIGNING SLAB PANEL LAYOUT DESIGNING STAIR PANEL LAYOUT PRECISE DIMENSION OF STRUCTURE ELEMENTS 11/3/19 page 10 HIGH NUMBER OF USED TIMES 70% REUSED FOR OTHER PROJECTS Al-form can be used for more than 100 times This mean each pieces can be used at not only projects For conventional form, we have to supply again when the form surface is damaged or forms are cut into useless small pieces As for Al-form, only one time supply we can even use for others projects Usually, up to 80% of al-form elements are standard and can be reused in new projects 11/3/19 Page 38 CONVENTIONAL FORM AL FORM For plywood, cutting is unavoidable No need cutting on working area These cut pieces will become trash No trash, only form materials 11/3/19 Page 39 ELIMINATE REPAIRING COST As mentioned above, Al-form system let us have high exact size and good concrete surface This mean repairing cost is minimized For conventional form, quality concrete surface and size vitally depend on workmanship This is a major hidden saving, as builders are very reluctant to admit the true costs of locating and repairing costs 11/3/19 Page 40 CONVENTIONAL FORM PLASTERING 11/3/19 Page 41 CONVENTIONAL FORM PLASTERING 11/3/19 Page 42 CONVENTIONAL FORM NEED REPAIRING 11/3/19 Page 43 AL-FORM - PAINTING CAN START RIGHT AFTER CONCRETE FORMING 11/3/19 Page 44 AL-FORM - PAINTING CAN START RIGHT AFTER CONCRETE FORMING 11/3/19 Page 45 MONO SLAB SYSTEM All the al-form will be moved up and used for next floors, so the shoring floors is very tidy Conventional form need two shoring floors, dismantle and moving up this shoring system take much more time than Al-form method 11/3/19 page 46 SHORING FLOORS CONVENTIONAL FORM AL FORM all slab, beam formworks & supporting system remain for lower Only prop head & support remain floors All other form is moved up and setting again 11/3/19 Page 47 SHORING FLOORS CONVENTIONAL FORM AL FORM all slab, beam formworks & supporting system remain for lower Only prop head & support remain floors All other forms is moved up and setting again 11/3/19 Page 48 11/3/19 page 49 SHORING FLOORS CONVENTIONAL FORM 11/3/19 AL FORM Page 50 SHORING FLOORS CONVENTIONAL FORM 11/3/19 AL FORM Page 51 Thank you for your attention! 11/3/19 page 52 ... CONCRETE SURFACE CONVENTIONAL FORM 11/3/19 AL FORM Page 18 CONCRETE SURFACE CONVENTIONAL FORM 11/3/19 AL FORM Page 19 11/3/19 page 20 ĐỐI VỚI CROWNE PLAZA * Work schedule for Typical Floor (APT - 7days)... 10 CONVENTIONAL FORM WORKING PROCESS BEFORE DISMANTLING 11/3/19 AFTER DISMANTLING Page 11 AL FORM WORKING PROCESS BEFORE DISMANTLING 11/3/19 AFTER DISMANTLING Page 12 CONVENTIONAL FORM WORKING... SURFACE Eliminate number of construction joints because all the vertical & horizontal concrete elements is simultaniously casted in using Al- form When using plywood, after a limited number of using