Đây là biện pháp công ty nước ngoài về vấn đề an toàn loa động trên công trường.Việc xây dựng mới hoặc mở rộng, cải tạo cơ sở để sản xuất, sử dụng, bảo quản, lưu giữ và tàng trữ các loại máy, thiết bị, vật tư, các chất có yêu cầu nghiêm ngặt về an toàn lao động, vệ sinh lao động, phải có luận chứng về các biện pháp bảo đảm an toàn lao động, vệ sinh lao động đối với nơi làm việc của người lao động và môi trường xung quanh theo quy định của pháp luật.
Description of Compilation The “Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects” (Illustrations) is compiled in accordance with relevant laws, regulations, standards and specifications of China as well as related stipulations of countries and regions where CSCEC has been carrying out business operations, combining with China’s construction safety management system and actual situations on site The compilation is done to implement CSCEC’s safety concept of “Life First and Safety First” and realize normalization and standardization of safety facilities on construction sites I Principles and Requirements of Compilation The compilation is done complying with laws, regulations and standards of the state, based on which, we strive to make it simple, practical, easily kept, well circulated and instrumentalized The compilation, taking full account of geographical differences, has classified the Illustrations into such three parts as Basic Protection, Standard Protection and Upgraded Protection The Basic Protection is the bottom line, followed by the Standard Protection to be popularized and the Upgraded Protection to be recommended The Upgraded Protection is the relevant addition of the Standard Protection The standard or standards of the host countries, if higher than the Illustrations, shall be applied The materials included in the Illustrations for undertaking protections shall have to meet the specifications in terms of rigidity, thickness and side impacting force The Illustrations includes the most basic site protections other than those uncovered protections which shall be done in line with “Illustrated Standards for Safety Protection on Construction Sites of CSCEC’s Projects” (2014 edition) The Illustrations shall be implemented from the date of its issuance II Basis of Compilation Law of the People’s Republic of China on Safety Production Safety Management Measures for the Safety Management of Large and Dangerous Parts of Projects Provisions of Safety Supervision and Administration on Construction Lifting Appliances Standard for Construction Safety Inspection Technical Code for Safety of Temporary Electrification on the Construction Site Technical Code for Safety of Working at Height of Building Construction Technical Code for Safety of Steel Tubular Scaffold with Couplers in Construction Technical Code for Safety of Implementation Scaffold Practice in Construction Technical Code of Temporary Building of Construction Site Technical Code for Fire Safety of Construction Site Related Management Rules for Safety Production of CSCEC The Compilation Committee September 2017 Basic Protection Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects Table of Contents Protection of Height Operations 1.1 Protection of Edge 1.1.1 Protection of Foundation Pit Edge 1.1.2 Protection of Floor, Balcony and Roof Edge 1.1.3 Protection of Stairway Edge 1.1.4 Protection of Operation Line Edge 1.2 Protection of Hole 1.2.1 Protection of Reserved Hole .6 1.2.2 Protection of Elevator Shaft 1.2.3 Protection of Post-cast Strip 1.3 Protection of Passageway .10 1.4 Movable Operating Platform 11 1.5 Overhanging Discharge Platform 12 1.6 Radius Protection of Falling Object from Main Structure 14 Scaffold 2.1 Floor-standing Scaffold .15 2.2 Overhanging Scaffold 17 2.3 Wall Connecting Fitting 18 2.4 Ramp 19 3.Others 3.1 Protection of External Electric Power 20 3.2 Protection of Distribution Box 21 3.3 Protection Shed of Processing Plant 22 3.4 Protective Hood for Machinery 23 Life First, Safety First covered with fine mesh net steel pipe rail bottom horizontal tube upright tube skirting width 200 Caution colors 1.1.1.1 Diagram of Foundation Pit Edge Protection 1.1.1.2 Elevation of Foundation Pit Edge Protection Unit:mm ORSH LQDJHV GUD skirting Notes safety net drainage Protection of foundation pit edges shall be done as shown above Protective railings shall be installed fine mesh safety vertical net inside and 200mm skirting board outside, painted with red and white and black and yellow colors Drainage ditch shall be made outside the protective railings Warning signs shall be outside the protective railings Warning lights shall be set up on the protective railings for night operations 1.1.1.3 Side Elevation of Foundation Pit Edge Protection Unit: mm 1.1.1 Protection of Height Operations-Edge Protection Protection of Foundation Pit Edge Illus 1.1.1.1~1.1.1.3 Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects 1200(When slope is larger than 1:2.2, it shall be 1500) Floor N+1 Floor N 1.1.2 Diagram of Edge Protection for Floor, Balcony and Roof Unit mm Notes Protective railings for floor, balcony and roof edges shall be of steel pipes with fasteners as shown in drawing1.1.2 Spacing of upright tubes shall not be larger than 2000mm, with 200mm skirting boards Fine mesh safety vertical net shall be installed inside the protective railings 1.1.2 Protection of Height Operations-Edge Protection Warning lights shall be set at special locations Protection of Floor, Balcony & Roof Edge Illus 1.1.2 Life First, Safety First ĭ VWHHOSLSH rail rail upright rail 1.1.3.2 Upright Tube Detail of Stair Edge Protection Unit mm padded base 1.1.3.1 Elevation of Stairway Edge Protection Unit mm Notes 7KHSURWHFWLRQVKDOOEHGRQHXVLQJɎ PPVWHHOSLSHZLWKIDVWHQHUV 1.1.3 Protection of Height Operations-Edge Protection Spacing of upright tubes shall not be larger than 2000mm Fine mesh safety vertical net shall be installled inside the protective railings Protection of Stairway Edge Illus 1.1.3.1~1.1.3.2 Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects Wing nut Wing nut Upright tube 0KLJKVWUHQJWKEROW Disk-extrudingg 5mm steel plate rib Bolted base 1.1.4.1 Detail of Screw Extruding Edge Protective Upright Tubes Unit mm 1.1.4.2 Detail of Disk Extruding Edge Protective Upright Tubes Unit mm Notes The screw extruding edge protective railings and upright tubes shall be as shown in the drawings Three M16 high strength bolts shall be fixed onto the steel pipes at the bottom, with the spacing of upright tubes not exceeding 2m On the top connect the railings or hang the life ropes for protection The disk extruding edge protective railings and upright tubes shall be as shown in the drawings After the formworks are set up, the protective railings shall be clipped onto the form board and the batten The spacing of the upright tubes shall not exceed 2m The protection on the top can be conducted by connecting the rails or hanging life ropes 1.1.4 Protection of Height Operations-Edge Protection Protection of Operation Line Edge Illus 1.1.4.1~1.1.4.2 Life First, Safety First toeboard rail post flat net rail side rope to be bound on to bottom tube rail rail post protective railing 1.2.1.1 Diagram of Reserved Hole Protection Notes The opening with the short-edge size smaller than 250mm but bigger than 25mm on the surface of floor slab, roof and platform shall have to be covered with solid cover plate The cover plate shall be well fixed For holes on the floor slab surface with the length of sides of 250mm–500mm, holes for installing precast units, and holes temporarily formed, the cover plates made of bamboo and wood shall be used to cover the holes The cover plate shall be well balanced and shall undergo rigid positioning For holes with the length of the sides of 500mm-1500mm, the steel pipe mesh composed of steel pipes and fasteners shall be prepared with the mesh spacing not bigger than 250mm The scaffold boards shall be fully laid on the top For holes with the length of the sides over 1500mm: 1) For main structure construction, the #-shaped platform comprised of steel pipes and fasteners shall be built on the holes The platform shall be laid hard materials (bamboo springboard or square wood form board) for protection Around the holes install protective railings in double rows (The lower railing shall be 600mm and under from the ground and the upper railing shall be 1100mm from the ground, with the upright tube being 1200mm in height.) Outside the railings “Beware of Falling down” warning signs 2) For installation and fitting-out works, protective railings in triple rows shall be installed around the holes (The lower railing shall be 100mm from the ground, the middle railing 500mm from the ground and the upper railing 1100mm from the ground, with the upright tube being 1200mm in height.) Safety flat net shall be set down the holes and outside the railings “Beware of Falling down” warning sign 3) The protective railings shall be at least 200mm from the edges of the holes 4) The railings shall be brushed warning color paint The cover plate used for the holes with the length of the sides smaller than 500mm shall bear the load of 1KN/m2 For holes by the vehicle roads, deep ditches, pipeline pits or channels, the cover plates used shall bear the load equaling to double times and more of the locally rated effective loading capacity of back wheels of trucks For vertical holes of window sills whose lower edges being under 800mm from the floor slab and ground, temporary railings with the height of 1.2m shall be added if the side edge head is bigger than 2m up rail fine mesh net rail post safety net down rail batten skirting width 200, with caution colored paint @150 side length larger than 1500 Yellow/black paint Yfull scaffold board side length smaller than 500 rebar two-way welded wooden board laid on rebar net steel pipe Yellow/black paint full scaffold board steel pipe side length 500-1500 side length 500-1500 1.2.1.2 Detail of Horizantal Hole Unit mm 1.2.1 Protection of Height Operations-Hole Protection Protection of Reserved Hole Illus 1.2.1.1~1.2.1.2 Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects skirting board VORS LQJ access ramp width 2.4.1 Effect Picture of Scaffold Slope Notes For scaffolds lower than 6m, the line-shaped gangway shall be used For scaffolds higher than 6m, the zigzag gangway shall be used The gangway shall be built up to the operation level The gangway shall be attached to the external scaffolds or building structure The gangway shall be effectively tied onto the building structure For gangway used for delivery of materials, the slope shall be less than 1:6 For gangway for people to walk, the width shall bigger than 1m with the slope less than 1:3 The gangway shall have double rows of railings and skirting boards on the two sides and platform boundaries The height of the uppert railings shall be 1200mm, the middle railings 600mm and the skirting board 200mm The railings and the skirting boards shall be painted red and white caution colors The scaffold board of the gangway shall be fixed one piece of anti-slip strip every 250 – 300mm, with the thickness of the wooden strip being 20 – 30mm The gangway shall be covered with fine mesh safety vertical net, with its sides strengthened with shear bracing access ramp width 2.4.2 Elevation of Scaffold Slope Unit:mm 2.4.3 Plan of Scaffold Slope Unit mm 2.4 Scaffold Ramp Illus 2.4.1~2.4.3 Life First, Safety First Min Operating Distance between Building and Overhung Power Line external power line Min Safety Operating Distance (m) Note: No external power line shall be installed along the ramp of up and down scaffolding 3.1.1 Real Picture of External Power Protection 3.1.2 Effect Picture of External Power Protection Notes: Special plan shall be made and subject to approval based on voltage grade For project under construction, no such activities shall be permitted under external overhead power lines as construction, setting up of operation sheds, building of living facilities, or stacking of building components, scaffolds, materials and other clutters The minimum safety operation distance between the perimeter of buildings under construction (including scaffolds) and the external overhead power lines shall be kept as per Drawing 3.1.2 For the safety distance not complying with the specifications, protective measures shall be taken such as insulation and isolation On construction sites, protection frames are generally set up, which shall be not less than 1m from the external power lines The power shall have to be cut during the setting up and demolition of the frames If the frames stand closer to the working sites, then they shall be sealed with hard insulation materials to avoid electric shock through the scaffolds and steel bars If the overhead power lines are within the working radius of tower cranes, protective measures shall be taken over the power lines The top shall be covered with 50mm wooden board or insulation materials similar to the strength of 50mm wooden board To indicate the operation of the tower crane, small colored flags can be put dispersedly on the protective frames, and colored lights (or LED lights) with safety voltage be used for night construction used 3.1 Temporary Power Protection of External Power Illus 3.1.1~3.1.2 Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects double-layer hard protection safety slogan switch box equipment CSCEC logo load line through tube Concrete bearing platform 3.2.1 Diagram of Distribution Box Protection Unit mm mm Side of Distribution Box Front of Distribution Box Notes: The protective shed for distribution box, being of steel pipe and steel bar grid, shall be securely installed on concrete bearing platform, and be grounded The powder fire extinguisher shall be provided The top shall be of double-layer wooden springboards with the color steel plate set in between and its slope being not less than 5% 3.2.2 Elevation of Distribution Box Protection Unit 3.2.3 Elevation of Distribution Box Protection Unit mm 3.2 Temporary Power Protection of Distribution Box Illus 3.2.1~3.2.3 Life First, Safety First double wooden springboard double wooden springboard steel pipe 3.3.1 Front Elevation of Shed of Processing Plant Unit mm 3.3.2 Side Elevation of Shed of Processing Plant Unit mm Notes: The protection shed of the processing plant shall be set up with steel pipe and fasteners as shown in the drawings The top of the protective shed, in double layers, can be of 50mm wooden board or other materials with the same strength of 50mm thick wooden board The two layers shall be vertical, with the spacing of 600mm 3.3 Protection Shed of Processing Plant Processing Shed Illus 3.3.1~3.3.2 Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects protective cover distributor 3.4.1 Diagram of Circular Saw Protective Cover Unit mm Notes The saw blade shall have wooden guard device on the top Hard protection device shall be set around the gearing 3.4 Protective Hood for Machinery Protective Hood for Circular Saw Illus 3.4.1 Life First, Safety First e co Protectiv ver for cu tting mac hine 3.4.2 Diagram of Cutting Machine Protective Cover Notes 7KHSURWHFWLYHFRYHUVKDOOEHRI PPDQJOHVWHHODQGPPWKLFNJDOYDQL]HG steel sheet The cover shall be brushed yellow paint 3.4 Protective Hood for Machinery Protective Hood for Cutting Machine Illus 3.4.2 Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects 3.4.3 Diagram of Welding Machine Protective Cover Notes The protective cover for welding machines shall have steel plate cover on the top with lifting lugs The bottom shall be installed fixed wheels and universal wheels Fixed railings shall be installed on three sides with an openable door on the rear side, which forms an enclosed movable box On the outside of the box leave spaces for fire extinguishers The top of the box shall be painted black and yellow while all other areas shall be in yellow color Cable hooks shall be insulated 3.4 Protective Hood for Machinery Protective Hood for Electric Welder Illus 3.4.3 Upgraded Protection Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects Table of Contents Protection of Height Operations 1.1 Protection of Edge 1.1.1 Protection of Edge… 51 1.1.2 Protection of Expansion Anchor Bolt Edge 52 1.1.3 Protection of Built-in Edge .53 1.2 Protection of Passageway 54 1.3 Aerial Platform Vehicle .55 Others 2.1 Protection Shed of Processing Plant 56 2.2 Protective Hood for Machinery 57 Life First, Safety First 1.1.1.1 Effect Picture of Fabricated Edge Protection 1.1.1.2 Effect Picture of Fabricated Edge Protection Note This is fabricated edge protection connected with bolt, which features easy assembly and recycling It can be applied to protection of foundation pit edges, floor edges and balcony edges 1.1.1 Protection of Height Operations Protection of Edge Illus 1.1.1.1~1.1.1.2 Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects NN NN 1.1.2.2 Effect Picture of Joint of Expansion Bolt Anchored Railings for Edge Protection Wing nut NN NN 1.1.2.1 Diagram of Expansion Bolt Anchored Upright Tube for Edge Protection Unit mm 1.1.2.3 Effect Picture of Expansion Bolt Anchored Railings Notes This is instrumentalized protective railing with uprights being 40-48mm steel pipes The bottom shall be strengthened by 3mm steel plate and 200mm casing pipes U-bolts shall be set on the uprights to fix the rails with butt joints as shown ( Galvanized steel pipe with block pin and butt joint are available in market) Safety steel meshes shall be installed The methods of protection herein illustrated shall apply to foundation pit edges of concrete ground, floor edges, edges of large openings, steel platform edges (can be fixed by welding), etc for Edge Protection Unit mm 1.1.2 Protection of Height Operations Protection of Expansion Anchor Bolt Edge Illus 1.1.2.1~1.1.2.3 Life First, Safety First Upright Tube Wing nut 75 103 100 200 50 103 75 Built-in Fitting Section View A-A Scaling: 1:1 1.1.3.2 Detail of Built-in Fittings for Edge Protection Unit:mm 1.1.3.1 Effect Picture of Built-in Upright Tube for Edge Protection 1.1.3.3 Diagram of Built-in Railings for Edge Protection Unit Notes This edge protection shall be of instrumentalized protective railing fixed with built-in method The built-in fittings shall be precast products The bottom shall be of 3mm steel plate and welded with PPFDVLQJSLSH7KHWZRVLGHVVKDOOEHZHOGHGɎPPGHIRUPHGEDUV This protective railing shall apply to all concrete cast edge protections mm 1.1.3 Protection of Height Operations Protection of Built-in Edge Illus 1.1.3.1~1.1.3.3 Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects 1.2.1 Effect Picture of Safety Passageway Protection 1.2.2 Effect Picture of Safety Passageway Protection Note The protective shed of the safety passageway shall be fabricated type connected with bolt, which features easy assembly and recycling 1.2 Protection of Passageway Passageway Illus 1.2.1~1.2.2 Life First, Safety First 1.3.1 Picture of Real Aerial Platform Vehicle 1.3.2 Picture of Real Aerial Platform Vehicle 1.3.3 Picture of Real Aerial Platform Vehicle 1.3 Protection of Height Operations Aerial Platform Vehicle Illus 1.3.1~1.3.3 Illustrations of Safety Protection on Sites of CSCEC’s Overseas Projects 2.1.1 Effect Picture of Rebar Shed 2.1.2 Effect Picture of Woodwork Shed Note The protective shed shall be fabricated type connected with bolts, which features easy assembly and recycling 2.1.3 Effect Picture of Protective Shed for Small Machines & Tools 2.1 Protection Shed of Processing Plant Protection Shed Illus 2.1.1~.2.1.3 ... Administration on Construction Lifting Appliances Standard for Construction Safety Inspection Technical Code for Safety of Temporary Electrification on the Construction Site Technical Code for Safety. .. Operations-Hole Protection Protection of Reserved Hole Illus 1.2.1.1~1.2.1.2 Illustrated Standards for Safety Protection on Construction Sites of CSCEC's Overseas Projects expansion bolt 5mm iron... Horizantal Protection the horizontal safety net up 1.2.2 Protection of Height Operations-Hole Protection Protection of Elevator Shaft Illus 1.2.2.3~1.2.2.5 Illustrations of Safety Protection on Sites