BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS BÀI tập vẽ 3d SOLIDWORKS
Additional Projects ÉÉÉ Project ÉÉÉ A ÉÉÉ ÉÉÉ A-2 Practical Applications of Unigraphics Student Manual EDS All Rights Reserved Unigraphics NX Additional Projects ÉÉÉ ÉÉÉ A ÉÉÉ ÉÉÉ Project EDS All Rights Reserved Practical Applications of Unigraphics Student Manual A-3 Student Project Create different components of the Double Bearing assembly and then assemble them as shown in Figure Figure shows the exploded view of the assembly The dimensions of various components are given in Figure to Figure Figure Double Bearing assembly Figure Exploded view of the Double Bearing assembly Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student Project Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student Projects Figure Top view of the Cap Figure Top view of the Base Figure Front view of the Cap Figure Front view of the Base Figure Dimensions of the Bushing and the Bolt Student Projects In this tutorial you will create all the components of the Wheel Support assembly and then assemble them as shown in Figure The exploded view of the assembly is shown in Figure The dimensions of the components are shown in Figure 10, to Figure 14 Figure Wheel Support assembly Figure Exploded view of the Wheel Support assembly Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student Project Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student Projects Figure 10 Dimensions of the Base Figure 11 Dimensions of the Support Figure 12 Front view of the Wheel Figure 13 Sectioned side view of the Wheel Figure 14 Dimensions of the Shoulder Screw, Bolt, Nut, Bushing, and Washer Student Projects Create the components of the Drill Press Vice assembly and then assemble them, as shown in Figures 15 and 16 The dimensions for the components are shown in Figures 17 through 22 You will use the bottom-up approach for creating this assembly Figure 15 Drill Press Vice assembly Figure 16 Drill Press Vice assembly Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student Project Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student Projects Figure 17 Dimensions of the Clamp Screw, the Handle Stop, and the Clamp Screw Handle Figure 18 Dimensions of the Jaw Face, the Cap Screw, and the Safety Handle Figure 19 Top view of the Base Figure 21 Top view of the Movable Jaw Figure 20 Front view of the Base Figure 22 Front view of the Movable Jaw Student Projects Create the components of the Pipe Vice assembly shown in Figures 23 and 24 The dimensions of the components are shown in Figures 25 and 26 You will use the bottom-up approach for creating this assembly Figure 23 Pipe Vice assembly Figure 24 Exploded view of the Pipe Vice assembly Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student Project Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student Projects Figure 25 Dimensions of the Base Figure 26 Dimensions of the other components Student Projects Create the components of the Butterfly Valve assembly shown in Figures 27 and 28 The dimensions of the components are shown in Figures 29 and 37 Use the bottom-up approach for creating this assembly Figure 27 Butterfly Valve assembly Figure 28 Inside view of the Butterfly Valve Figure 29 Solid model of the Body Figure 30 Top view of the Body Figure 31 Left-side view of the Body Figure 32 Sectioned front view of the Body Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student Project Evaluation Chapters Do not copy Logon to www.cadcim.com for more information 10 Student Projects Figure 33 Top view of the Arm Figure 35 Dimensions of the Shaft Figure 34 Sectioned front view of the Arm Figure 36 Dimensions of the Retainer Figure 37 Dimensions of the Plate, Nut, and Screw Create and assemble all the components of the Tool Head of Shaping Machine shown in Figure and Figure After creating the assembly, generate the top, front, right-side, and the isometric view of the assembly Add the parts list similar to the one shown in Figure The dimensions of the individual components are shown in Figures through 20 Figure Assembled view of Tool Head of Shaping Machine Figure Different components in the assembly Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student Project Evaluation Chapters Do not copy Logon to www.cadcim.com for more information CATIA for Designers Figure Parts list for the assembly Figure 3D view of the Vertical Slide Figure Top view of the Vertical Slide Figure Side view of the Vertical Slide Figure Sectioned front view of the Vertical Slide Figure Front view of the Back Plate Figure Side view of the Back Plate Figure 10 3D view of the Back Plate Figure 11 Dimensions of the Tool Holder Figure 12 Dimensions of the Handle Figure 13 Dimensions of the Handle Bar Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student’s Project Evaluation Chapters Do not copy Logon to www.cadcim.com for more information CATIA for Designers Figure 14 Top view of the Swivel Plate Figure 15 Top view of the Drag Plate Figure 16 Sectioned front view of the Swivel Plate Figure 17 Sectioned front view of the Drag Plate Figure 18 Dimensions of the components Figure 19 Dimensions of the components Figure 20 Dimensions of the components Evaluation Chapters Do not copy Logon to www.cadcim.com for more information Student’s Project