CMTR502 GX m4

ROUTE Mode 2010-04-21 ©SKF Slide [Code] SKF [Organisation] Module Objective(s) To instruct the new GX Series Microlog user on how to collect ROUTE measurement data 2010-04-21 ©SKF Slide [Code] SKF [Organisation] What is a ROUTE? A list of measurement POINTs arranged in a sequence that facilitates the most efficient data collection path through your plant / mill • Created in MA and downloaded to the Microlog • right arrow opens and progresses down the ROUTE hierarchy • left arrow closes and retreats up the hierarchy 2010-04-21 ©SKF Slide [Code] SKF [Organisation] active route active route’s hierarchy active meas point active point’s “description” How to Select a ROUTE • If necessary, use the left arrow to make ROUTE hierarchy level active, all ROUTEs display two routes • Use up/down arrows to highlight the ROUTE to make active • Use the right arrow to select and progress into the highlighted ROUTE • At any time, press an Enter button on any non-POINT hierarchy item to begin data collection for the next POINT in the list (after the highlighter pointer) 2010-04-21 ©SKF Slide [Code] SKF [Organisation] ROUTE Hierarchy Overview “sets” help organize machines “machines” contain only measurement POINTs active meas point initiate non ROUTE mode for in-the-field analysis 2010-04-21 ©SKF Slide [Code] SKF [Organisation] The “Auto Advance” Setting On – not show spectrum, auto advance to next POINT Off – show spectrum 2010-04-21 ©SKF Slide [Code] SKF [Organisation] Initiating Data Collection select POINT and press Enter button 2010-04-21 ©SKF Slide [Code] SKF [Organisation] Spectral Measurement Display overall vibration value real time - no interruption in data samples meas units cursor frequency and amplitude at cursor position add coded note(s) re-take meas • Press Enter to save meas data and advance to next meas 2010-04-21 ©SKF Slide [Code] SKF [Organisation] not save meas data Applying Analysis Features Y-axis scaling H key - display harmonic markers T key – phase “tables” P key - jump to next peak “.” key – immed toggle between display expansion and display compression 2010-04-21 ©SKF Slide 10 [Code] SKF [Organisation] +/- key – display expansion / compression How to View POINT Setup Information 2010-04-21 ©SKF Slide 12 [Code] SKF [Organisation] Time Waveform Display overall vibration value cursor position and amplitude • Press Enter to save meas data and advance to next meas • H, P, +/-, and up/down arrow “analysis” keys are available as with spectral displays 2010-04-21 ©SKF Slide 13 [Code] SKF [Organisation] Process Measurement Display full scale value current reading previous reading and change from previous perform manual data entry using keypad 2010-04-21 ©SKF Slide 14 [Code] SKF [Organisation] alarm setpoint previous reading current reading Quick Review 2010-04-21 ©SKF Slide 17 [Code] SKF [Organisation] ...Module Objective(s) To instruct the new GX Series Microlog user on how to collect ROUTE measurement data 2010-04-21 ©SKF Slide [Code] SKF