1. Trang chủ
  2. » Kỹ Thuật - Công Nghệ

THIẾT TRÌNH THIẾT KẾ CHẾ TẠO KHUÔN MẪU ĐỦ 25 BÀI_12_EN

24 376 3

Đang tải... (xem toàn văn)

Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống

THÔNG TIN TÀI LIỆU

Thông tin cơ bản

Định dạng
Số trang 24
Dung lượng 2,72 MB

Nội dung

(Cold runner) • Tasks and technical requirements? • The composition and characteristics of the part, how to calculate the size and layout silver spray stalk, entrance channel and plastic • Computing applications, systems design to channel cool computer mouse shell (using Creo to design) Tasks and technical requirements? • Guide channel system cools the molten resin from the nozzle of the injection molding machine via Roll puff, canals and then into the cavity vent • c) Design Principles • - Make sure the filling and the cavity • - Choosing the right location for vents why not affect • Cosmetic products and mechanical properties of the product • - Be sure to get the product quickly Composed of cold channel system Roll Silver Spray nozzle • The size of a nozzle stalk injection Part materials in that branch from freezing early obstruction in the design flow should further slow cooling tail.? • Usually located in the intersection of the channel branch R0.5 should bo corners Channel system I FLOW IN channel The thickness of the plastic layer freezes affected: • Speed Inkjet • The Melting • The temperature of the mold II.KENH his people • Kenhnhua: is the connection between injection and vents Roll Request of canals Specifications channel Có thểtính đường kính thủy lực dựa vào công thức: • The surface area of the smallest cut.? • Speed slow cooling.? • Less friction.? • It helps maintain core slowly cools heat and pressure.? • Difficult for machining between two concentric half mold 2.2 The type of channel cross section •Larger surface area for effective trapezoidal channel correction should lose heat faster • Ease of processing • Do not cool section should make funeral friction, pressure, irregular • Ease of processing The size of the channel (there are methods • Size calculation based on cross section cut D: channel diameter (mm) W: weight of products (g) L: channel length (mm) or: D ': diameter reference channel fL: coefficient length • The relationship between the diameter of the main channel and branch channels: • Dc: The main canal diameter (mm) • Dn: branched channel diameter (mm) • N: number of diverters

Ngày đăng: 28/09/2016, 20:54

TỪ KHÓA LIÊN QUAN