Slitter Machine - Function of Slitter Machine

The slitting machine consists of a blade and a sensor attached to the blade which indicates the needle line during slit opening the fabric for processing.. In the slitting machine the fa

Slitting Machine

Prepared By : Mazadul Hasan sheshir ID: 2010000400008

13th Batch (Session : 2009 - 2013) Department : Wet Processing Technology Email: mazadulhasan@yahoo.com ( Facebook) Blog : www.textilelab.blogspot.com

Southeast University

Department Of Textile Engineering

I/A 251,252 Tejgaon Dhaka Bangladesh

Prepared By :

The slitting machine is used in processing fabrics in the open line in the fishing section The slitting machine consists of a blade and a sensor attached to the blade which indicates the needle line during slit opening the fabric for processing In the slitting machine the fabric is passed through the twister over the basket containing exhaust fan for circular dropping of the fabric and the blade for cutting the needle line of the fabric and then from the padder and immersion roller through to the turning and delivery roller Finally the open width fabric is delivered

Slitting Machine

• Slitting the fabric to turn tubular fabric to open width fabric.

• Softening the fabric by applying softeners.

• Reducing the content water in the fabric.

• Squeezing the fabric for proper chemical penetration

Function of the Machine:

Slitter Basket

Detwister

Cutter unit with automatic needle path detector

• Open the fabric from the rope form.

• Reduce the water content

• To slit the fabric from tube form

• Apply overfeed to give some compaction

• Width-wise stretch the fabric

• Plait the fabric

Machine Function:

Sensor Twister

Knife

Centering Roller

Delivery Roller

Tension Roller J-Box

Schematic Diagram of Slitting

Machine

Figure: Schematic diagram of Rope Opening, Slitting & Dewatering Machine

Cutting tube with Blade and Needle mark detector

Over feed and Padder pressure of

Slating Machine:

Bianco Rope Opening, Slitting & Dewatering Machine

•J-Box: Squeeze the fabric to reduce the water contains Water reducing

percentage depends on J-Box pressure

•Detwister: By the detwister rope formed fabric become untwists form (due

to action of sensor)

•Hand Wheel: It is manual and used for guiding the rotary blade

•Turn Wheel: It controls the fabric rotation

•Rotary Blade: To cut the fabric through break wales line

•Ring: To help cutting

•Guide Roller: To guide the fabric to plaiting

•Plaiter: To plait the fabric

•Sensor: Sense for cutting through break wales line

Function of main parts

The bianco tensionless tubular fabric slitting and opening lines are used after the wash process or the dyeing station

1 The fabric, placed in a basket in rope form

2 It is made to pass through the squeezing unit where most of the

impregnation liquid is extracted

3 Then it enters the detwister, which eliminates the tension of the rope

and is prepared for the slitting and spreading processes

4 The container is placed on a platform whose rotation, synchronized with

the action of the detwister, untwists the rope preceding the entrance to the detwister

5 The latter is placed at the top of the structure, for optimal distance from

the automatic slitter, so as to enhance the effectiveness of rope

detwisting and spreading

Basic Operation Principle:

6 Then the untwist form fabric is transferred to the basket by means of

motorized belts and then it moves on towards the slitter without stresses that would can be widened upto a diameter of 80 cm

8 The cutting line can be controlled by means of basket rotation

10 From conveyor belt fabric is passed through dogal centering roller (It

constitutes a

12 compacata fabric centering system, with faster centering action and

enhanced efficacy compared to traditional centering devices.)

10 The open with fabric is passed through squeezing system to extract

the greatest possi-ble quantity of impregnation liquid from the fabric, by squeezing it between two rub-ber coated rollers (It structure is highly compact and sturdy, and it can be made either of iron or of stainless steel)

11 After squeezing the fabric it go to the plaiter to plait on a trolley

Cutting Line Check: Operator checks fabric cutting line Rotary blade cut

fabric through wales line or not.

Bow and Slant Check: Operator checks bow and slant at delivery side Faults Check: As mentioned earlier.

Checking Parameter:

1 Used to remove excess water after pretreatment and dyeing

2 To slit the tube fabric by the knife for opening of the fabric and ready

for stentering

3 Delivered fabric is crease free state

4 Before squeezing balloon is formed with the help of compressed air

passing by a nozzle or air sprayer

5 It can control the diameter of fabric and GSM and shrinkage by over

feeding mechanism

6 To impart soft finish to the fabric by using required softener.

Fabric path of Slitting, De-watering & De-twisting m/c

Corino

Capacity: 10 tones/shift Actual production: 7 tones/shift.

Utility:

1.Water 2.Electricity 3.Compressed air or Processed air (to form the tube fabric into ballon with a view to remove crease)

Corino

• Squeeze roller (to remove water)

• Stretcher (to control width)

• Over feeding wheels (to control GSM)

• De-twisting device (To delivery the fabric roll in untwisted form)

• Folding device (to delivery the fabric in folded form)

• Squeezing roller

• Padder for softener

Controlling points or Control system:

Manpower Required:

Worker: 02

Corino

Fabric Type Pad pressure Speed Over Feed

Corino

•Check turntable tire pump & spring pressure

•Grease the turntable

•Check de twister speed reducer, transmission belts pneumatic brake

•Check oiler oil level of the fabric expander

•Check movable reel plaiter driving system

Corino slitting machine Maintanance

Corino

MONTHLY MAINTENANCE CHECK LIST

• Grease the squeeze for the rope fabric part

• Grease the dewatering bearings

• Grease the bearings of water slitting device & driving screw for basket opening

• Grease the bearings of open width squeezer

• Change gear oil once a year

( Corino slitting machine)

Corino

Horizontal cutting System

Front view Of a Slitter

Cutting tube with Blade and Needle mark detector

Slitting of a tubular Knitted

Fabrics

Spreader –spiral roller

Slitter –Padding zone

1 Yarn Manufacturing Technology