Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống
1
/ 18 trang
THÔNG TIN TÀI LIỆU
Thông tin cơ bản
Định dạng
Số trang
18
Dung lượng
3,25 MB
Nội dung
Garment Faults Prepared By : Mazadul Hasan sheshir ID: 2010000400008 13 th Batch (session 2009-2013) Department : Wet Processing Technology Email: mazadulhasan@yahoo.com Blog : www. Textilelab.blogspot.com (visit) Southeast University Department Of Textile Engineering I/A 251,252 Tejgaon Dhaka Bangladesh ! " " # " $% ! ! & '() * + , ! "#-.. "# $# " %&'"&/" ! & 0#"! * 1 , - 2 3454- 6 - %&'"& $# / ('&+" ! & 3 * 344 , 7 $#/ 8" ('& )1" ! & 1#"! * 1 $# #"! ) "&3 " ! & 1 * "& $#/ *#'0 ! & 9! *#' $#/9 [...]... button and any kind of trims Defects are also classified (as per extent of defect) into Critical, Major and Minor defects 1.Critical defects are defects that are not allowed to be shipped and are the most serious of defects (0%) 2 Major defects are serious defects that are not allowed over a certain percentage (3%) depending on buyers requirements 3 Minor defects are serious defects that are not allowed... these defects come from finishing section Others Sizing defects: (Difference in measurement of various parts of garments), wrong placement of pocket, buttonhole, embroidery and prints , measurement discrepancy- all these problems come from pattern section Poor ironing: if not sufficient, there might be creases and crinkles on garment surface and if ironing is too heavy, there might be shining mark on garment. .. Improper embroideries and prints Etc Remedy: This type of defects occurred due to unawareness That is why during production the garments should be checked properly (In line inspection) and the booking of trims &accessories must be given as like as artwork Trims, accessories and embellishment defects: 3 Trims, accessories and embellishment defects: These defects include color, size and placement of trims... folding , improper packing into cartons – all these defects come from finishing section Trims, accessories and embellishment defects: Trims, accessories and embellishment defects: These defects include color, size and placement of trims such as labels, sewing thread, screen print, embroidery designs, zipper, hangtag, lining, button and any kind of trims Defects are given below: 1 Unmatched color of thread... the garment parts must be kept in proper bundle with number Seams not aligned at crossing of seams Seams not aligned at crossing of seams: Seams are not lined up at intersection of seams Cause: Defects generally come about either from improper handling of the cut piece Remedy: When these defects starts to appear at close to 2% or 5 pieces, the production must be informed and the operator must re-trained . Garment Faults Prepared By : Mazadul Hasan sheshir ID: 2010000400008 13 th Batch (session 200 9-2 013) Department : Wet Processing Technology Email:. 1 , - 2 3454 - 6 - %&'"& $#. , 4 4(! >9@0BJ"' - ' &J"@I=B *' - @,=B ) ,'@6=B )