Thông tin tài liệu
Table 274. REDUCTION IN AREA OF AUSTENITIC STAINLESS STEELS (SHEET 1 OF 4) Type Form Condition ASTM Specification Reduction in Area (%) Type 302 (UNS S30200) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Type 302B (UNS S30215) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Types 303 (UNS S30300) and 303Se (UNS S30323) Bar Annealed A581 55 Type 304(UNS S30400) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Type 304L (UNS S30403) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 (a) Up to 13 mm thick (b) Over 13 mm thick. Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p364-366 (1993). 8.33 Mechanical L Page 886 Wednesday, December 31, 1969 17:00 ©2001 CRC Press LLC Type 305 (UNS S30500) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Types 308 (UNS S30800),321(UNS S32100),347(UNS34700) and 348 (UNS S34800) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Type 308L Bar Annealed — 70 Types 309 (UNS S30900), 309S (UNS S30908), 310 (UNS S31000) and 310S (UNS S31008) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Table 274. REDUCTION IN AREA OF AUSTENITIC STAINLESS STEELS (SHEET 2 OF 4) Type Form Condition ASTM Specification Reduction in Area (%) (a) Up to 13 mm thick (b) Over 13 mm thick. Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p364-366 (1993). 8.33 Mechanical L Page 887 Wednesday, December 31, 1969 17:00 ©2001 CRC Press LLC Type 314 (UNS S31400) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Type 316 (UNS S31600) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Type 316F (UNS S31620) Bar Annealed — 55 Type 316L (UNS S31603) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Type 316LN Bar Annealed — 70 Table 274. REDUCTION IN AREA OF AUSTENITIC STAINLESS STEELS (SHEET 3 OF 4) Type Form Condition ASTM Specification Reduction in Area (%) (a) Up to 13 mm thick (b) Over 13 mm thick. Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p364-366 (1993). 8.33 Mechanical L Page 888 Wednesday, December 31, 1969 17:00 ©2001 CRC Press LLC Type 317 (UNS S31700) Bar Hot finished and annealed A276 50 Cold finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Type 317L (UNS S31703) Bar Annealed — 65 Type 317LM Bar,Plate,Sheet, Strip Annealed — 50 Type 329 (UNS S32900) Bar Annealed — 50 Type 330HC Bar,Wire,Strip Annealed — 65 Table 274. REDUCTION IN AREA OF AUSTENITIC STAINLESS STEELS (SHEET 4 OF 4) Type Form Condition ASTM Specification Reduction in Area (%) (a) Up to 13 mm thick (b) Over 13 mm thick. Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p364-366 (1993). 8.33 Mechanical L Page 889 Wednesday, December 31, 1969 17:00 ©2001 CRC Press LLC Table 275. REDUCTION IN AREA OF FERRITIC STAINLESS STEELS Type ASTM Specification Form Condition (%) Type 405 (UNS S40500) A580 Wire Annealed 45 A580 Annealed, Cold Finished 45 Type 429 (UNS S42900) — Bar Annealed 65(a) Type 430 (UNS S43000) A276 Bar Annealed, Hot Finished 45 A276 Annealed, Cold Finished 45 Type 430Ti(UNS S43036) — Bar Annealed 65(a) Type 434 (UNS S43400) — Wire Annealed 78(a) Type 442 (UNS S44200) — Bar Annealed 40(a) Type 446 (UNS S44600) A276 Bar Annealed, Hot Finished 45 A276 Annealed, Cold Finished 45 (a) Typical Values Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p368 (1993). 8.33 Mechanical L Page 890 Wednesday, December 31, 1969 17:00 ©2001 CRC Press LLC * Typical values Table 276. REDUCTION IN AREA OF H IGH–NITROGEN AUSTENITIC STAINLESS STEELS Type ASTM Specification Form Condition Reduction in Area (%) Type 201 (UNS S20100) A276 Bar Annealed 45 Type 205 (UNS S20500) — Plate Annealed * 62 Type 304HN (UNS S30452) — Bar Annealed 50 Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p367 (1993). 8.33 Mechanical L Page 891 Wednesday, December 31, 1969 17:00 ©2001 CRC Press LLC Table 277. REDUCTION IN AREA OF P RECIPITATION-HARDENING AUSTENITIC STAINLESS STEELS Type Form Condition Reduction in Area (%) PH 13–8 Mo (UNS S13800) Bar, Plate, Sheet, Strip H950 45 H1000 45 15–5 PH (UNS S15500) and 17–4 PH (UNS S17400) Bar, Plate, Sheet, Stript H900 35(a) H925 38(a) H1025 45(a) H1075 45(a) H1100 45(a) H1150 50(a) H1150M 55(a) 17–7 PH (UNS S17700) Bar RH950 10 TH1050 25 (a) For flat rolled products, value generally lower and varies with thickness. Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p371 (1993). 8.33 Mechanical L Page 892 Wednesday, December 31, 1969 17:00 ©2001 CRC Press LLC Table 278. REDUCTION IN AREA OF MARTENSITIC STAINLESS STEELS (SHEET 1 OF 2) Type ASTM Specification Form Condition Reduction in Area (%) Type 403 (UNS S40300) A276 Bar Annealed, hot finished 45 A276 Annealed, cold finished 45 A276 Intermediate temper, hot finished 45 A276 Intermediate temper, cold finished 40 A276 Hard temper, hot finished 40 A276 Hard temper, cold finished 40 Type 410 (UNS S41000) A276 Bar Annealed, hot finished 45 A276 Annealed, cold finished 45 A276 Intermediate temper, hot finished 45 A276 Intermediate temper, cold finished 40 A276 Hard temper, hot finished 40 A276 Hard temper, cold finished 40 Type 410Cb (UNS S41040) A276 Bar Annealed, hot finished 45 A276 Annealed, cold finished 35 A276 Intermediate temper, hot finished 45 A276 Intermediate temper, cold finished 35 Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p369-370 (1993). 8.33 Mechanical L Page 893 Wednesday, December 31, 1969 17:00 ©2001 CRC Press LLC Type 414 (UNS S41400) A276 Bar Intermediate temper, hot finished 45 A276 Intermediate temper, cold finished 45 Type 414L — Bar Annealed 60 Type 420 (UNS S42000) — Bar Tempered 205 °C 25 Type 422 (UNS S42200) A565 Bar Intermediate and hard tempers for high-temperature service 30 Type 431 (UNS S43100) — Bar Tempered 260 °C 55 — Tempered 595 °C 57 — Tempered 315 °C 20 — Tempered 315 °C 15 — Tempered 315 °C 10 Type 501 (UNS S50100) — Bar, Plate Annealed 65 — Tempered 540 °C 50 Type 502 (UNS S50200) — Bar, Plate Annealed 70 Table 278. REDUCTION IN AREA OF MARTENSITIC STAINLESS STEELS (SHEET 2 OF 2) Type ASTM Specification Form Condition Reduction in Area (%) Data from ASM Metals Reference Book, Third Edition, Michael Bauccio, Ed., ASM International, Materials Park, OH, p369-370 (1993). 8.33 Mechanical L Page 894 Wednesday, December 31, 1969 17:00 ©2001 CRC Press LLC [...]... 1 .80 P 1.17 P 0 .80 P 720 780 84 0 Source: data compiled by J S Park from O V Mazurin, M V Streltsina and T P ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1 983 ©2001 CRC Press LLC 9 08 CRC Handbook of Materials Science & Engineering 8. 36 Mechanical Page 909 Wednesday, December 31, 1969 17:00 Mechanical Properties Table 284 VISCOSITY OF (SHEET 8 OF 15) GLASSES Glass... 1. 684 log P 80 0 (26.4% mol Na2O) 1.395 log P 85 0 (26.4% mol Na2O) 1.300 log P 87 0 (30% mol Na2O) 2.12x1015 P 4 48 (30% mol Na2O) 8. 06x1014 P 457 (30% mol Na2O) 13 1.02x10 P 467 Source: data compiled by J S Park from O V Mazurin, M V Streltsina and T P ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1 983 ©2001 CRC Press LLC 916 CRC Handbook of Materials Science & Engineering. .. Na2O) 2 .82 logP 1100 (23 .8 % mol Na2O) 2.44 logP 1200 (23 .8 % mol Na2O) 2.10 logP 1300 (23 .8 % mol Na2O) 1 .84 logP 1400 (27.7 % mol Na2O) 4.33 logP 80 0 (27.7 % mol Na2O) 3.71 logP 900 Source: data compiled by J S Park from O V Mazurin, M V Streltsina and T P ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1 983 ©2001 CRC Press LLC 902 CRC Handbook of Materials Science. .. 99.999 (82 5) 86 6 (82 8) 87 3 Ar He vac He spect pure spect pure 921 9 18 99.999 99.999 (754) 1130 (731) vac He vac B 99 .8 1060±50 vac Ba 99.5 276 Bi 99.9 99. 98 99. 98 380 ±10 3 78 380 ±10 Ar vac., Ar, H2 Ar 99.99 99.999 99.99995 376 380 ±3 375 vac Ar Ca p.a 360 Cd 99.9 (550±10) (525±30) 590±5 Au 99.9999 Ar H2 — Values in parentheses are less certain Source: data from Lang,G.,in Handbook of Chemistry and Physics,... Cleveland, 1974, F-23 ©2001 CRC Press LLC 9 18 CRC Handbook of Materials Science & Engineering 8. 36 Mechanical Page 919 Wednesday, December 31, 1969 17:00 Mechanical Properties Table 286 SURFACE TENSION OF ELEMENTS AT MELTING (SHEET 2 OF 6) Purity σmp Element (wt %) (dyn/cm) Atmosphere Co 99.99 99.9 983 (1520) 188 0 H2, He vac Cr 99.9997 1700±50 Ar Cs 99.995 68. 6 He Cu 99.9 99.9 99. 98 99. 98 (1 180 2±40)... Streltsina and T P ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1 983 ©2001 CRC Press LLC Shackelford & Alexander 91 7 8. 36 Mechanical Page 9 18 Wednesday, December 31, 1969 17:00 Mechanical Properties Table 286 SURFACE TENSION OF ELEMENTS AT MELTING (SHEET 1 OF 6) Purity σmp Element (wt %) (dyn/cm) Atmosphere Ag 99.7 99.99 99.99 99.99 86 3±25 ( 785 ) 86 0±20 86 5 Ar vac... log P 85 0 (9.9% mol Na2O) 1.569 log P 87 0 (10% mol Na2O) 1.28x1015 P 3 28 (10% mol Na2O) 1.41x1014 P 340 (10% mol Na2O) 2.06x1013 P 351 (12 .8% mol Na2O) 3.566 log P 630 (12 .8% mol Na2O) 3.257 log P 650 (12 .8% mol Na2O) 2.695 log P 700 (12 .8% mol Na2O) 2.252 log P 750 (12 .8% mol Na2O) 1.923 log P 80 0 (12 .8% mol Na2O) 1.661 log P 85 0 (12 .8% mol Na2O) 1.574 log P 87 0 (15% mol Na2O) 1.44x1015 P 381 (15%... mol PbO) (50% mol PbO) 8. 8 P 6.0 P 4.3 P 2.9 P 1020 1 080 1140 1200 (55% mol PbO) (55% mol PbO) (55% mol PbO) 51.0 P 22.4 P 12.6 P 720 780 84 0 Source: data compiled by J S Park from O V Mazurin, M V Streltsina and T P ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1 983 ©2001 CRC Press LLC Shackelford & Alexander 907 8. 36 Mechanical Page 9 08 Wednesday, December 31,... 11.4-12 .8 logP 10.4-11 .83 logP 9.43-10.65 logP Composition Viscosity 8. 54-9.52 logP 7 .8- 8.53 logP 7.1-7.65 logP Glass 180 0 1900 2000 (21.7 % mol Na2O) 4. 28 logP 900 (21.7 % mol Na2O) 3.66 logP 1000 (21.7 % mol Na2O) 3.17 logP 1100 (21.7 % mol Na2O) 2.76 logP 1200 (21.7 % mol Na2O) 2.40 logP 1300 (21.7 % mol Na2O) 2. 08 logP 1400 (23 .8 % mol Na2O) 3 .88 logP 900 (23 .8 % mol Na2O) 3. 28 logP 1000 (23 .8 % mol... Na2O) 1 .81 0 log P 80 0 (21.9% mol Na2O) 1.506 log P 85 0 (21.9% mol Na2O) 1.392 log P 87 0 13 Source: data compiled by J S Park from O V Mazurin, M V Streltsina and T P ShvaikoShvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1 983 ©2001 CRC Press LLC Shackelford & Alexander 915 8. 36 Mechanical Page 916 Wednesday, December 31, 1969 17:00 Mechanical Properties Table 284 VISCOSITY . Na 2 O) 3 .88 logP 900 (23 .8 % mol Na 2 O) 3. 28 logP 1000 (23 .8 % mol Na 2 O) 2 .82 logP 1100 (23 .8 % mol Na 2 O) 2.44 logP 1200 (23 .8 % mol Na 2 O) 2.10 logP 1300 (23 .8 % mol Na 2 O) 1 .84 logP 1400 (27.7. Shvaiko- Shvaikovskaya, Handbook of Glass Data, Part A and Part B, Elsevier, New York, 1 983 8. 36 Mechanical Page 903 Wednesday, December 31, 1969 17:00 ©2001 CRC Press LLC Mechanical Properties CRC Handbook of Materials. finished and annealed(a) A276 40 Cold finished and annealed(b) A276 40 Types 3 08 (UNS S3 080 0),321(UNS S32100),347(UNS34700) and 3 48 (UNS S3 480 0) Bar Hot finished and annealed A276 50 Cold finished and
Ngày đăng: 11/08/2014, 14:20
Xem thêm: Materials Science and Engineering Handbook Part 8 pot
