Tài liệu tham khảo về môn điện - điện tử giao thông

Tài liệu tham khảo về môn điện - điện tử giao thông

Products for Totally Integrated Automation and Micro Automation Catalog ST 70 • 2009 SIMATIC 01_Umschlag_KG_ST70_2009_en.indd2 2 30.10.2008 07:33:22 © Siemens AG 2008 Industrial Communication IK PI Industrial Communication E86060-K6710-A101-B6-7600 SIMATIC HMI ST 80 Human Machine Interface Systems E86060-K4680-A101-B6-7600 PC-based Automation ST PC Embedded Automation and PC-based Automation E86060-K4670-B101-B9-7600 SIMATIC sensors FS 10 Sensors for Factory Automation E86060-K8310-A101-A5-7600 SITRAIN ITC Training for Automation and Industrial Solutions E86060-K6850-A101-B9 (in Ger man) Products for CA 01 Automation and Drives Interactive catalog E86060-D4001-A510-C7-7600 Mall Information and Ordering Platform in the Internet: www .siemens.com/automation/mall Related Catalogs © Siemens AG 2008 SIMATIC Products for Totally Integrated Automation and Micro Automation Catalog ST 70 · 2009 Supersedes: Catalog ST 70 · 2007 Catalog News ST 70 N · 2008 The products contained in this catalog can also be found in the e-Catalog CA 01. Order No.: E86060-D4001-A510-C7-7600 Please contact your local Siemens branch © Siemens AG 2008 The products and sys- tems described in this catalog are manufac- tured/distributed under application of a certified quality management system in accordance with DIN EN ISO 9001 (Certified Registration No. 1323-QM). The cer- tificate is recognized by all IQNet countries. Introduction 1 LOGO! Logic Module 2 SIMATIC S7-200 3 SIMATIC S7-300 4 SIMATIC S7-400 5 SIMATIC Software 6 SIMATIC Programming Devices 7 Embedded / PC-based Automation 8 Component Based Automation 9 Overview 10 SIMATIC Control Systems 11 Supplementary Components 12 Appendix 13 SIMATIC ET 200, SIMATIC PCS 7, SIMATIC HMI, SIMATIC NET, SIMATIC PC, SIMATIC Sensors © Siemens AG 2008 1/2 Siemens ST 70 · 2009 © Siemens AG 2008 1/3 Siemens ST 70 · 2009 Answers for Industry. Siemens Industry answers the challenges in the manufacturing and the process industry as well as in the building automation business. Our drive and automation solutions based on Totally Integrated Automation (TIA) and Totally Integrated Power (TIP) are employed in all kinds of industry. In the manufacturing and the process industry. In industrial as well as in functional buildings. Siemens offers automation, drive, and low-voltage switching technology as well as industrial software from standard products up to entire industry solutions. The industry software enables our industry customers to optimize the entire value chain – from product design and development through manufacture and sales up to after-sales service. Our electrical and mechanical components offer integrated technologies for the entire drive train – from couplings to gear units, from motors to control and drive solutions for all engineering industries. Our technology platform TIP offers robust solutions for power distribution. The high quality of our products sets industry-wide benchmarks. High environmental aims are part of our eco-management, and we implement these aims consistently. Right from product design, possible effects on the environment are examined. Hence many of our products and systems are RoHS compliant (Restriction of Hazardous Substances). As a matter of course, our production sites are certified according to DIN EN ISO 14001, but to us, environmental protection also means most efficient utilization of valuable resources. The best example are our energy-efficient drives with energy savings up to 60 %. Check out the opportunities our automation and drive solutions provide. And discover how you can sustainably enhance your competitive edge with us. © Siemens AG 2008 1/4 Siemens ST 70 · 2009 SIMATIC Sensors AS-Interface Field Level Control Level Operations Level Management Level Ethernet ERP – Enterprise Resource Planning MES – Manufacturing Execution Systems SIMATIC PCS7 Process Control (DCS) • Maintenance • Modernization and Upgrade Industrial Software for • Design and Engineering • Installation and Commissioning • Operation SINUMERIK Computer Numeric Control SIMOTION Motion Control System PROFIBUS PA Process Instrumentation HART Industrial Ethernet Ethernet Totally Integrated Automation IO-Link 30.04.2008 Setting standards in productivity and competitiveness. Totally Integrated Automation. Thanks to Totally Integrated Automation, Siemens is the only provider of an integrated basis for implementation of customized automation solutions – in all industries from inbound to outbound. © Siemens AG 2008 1/5 Siemens ST 70 · 2009 KNX/EIB GAMMA instabus SIMATIC IT SIMATIC WinCC SCADA System SIMATIC NET Industrial Communication SIMATIC Controllers Modular/Embedded/ PC-based SIMATIC HMI Human Machine Interface Safety Integrated SIRIUS Industrial Controls SENTRON Switching Devices SIMOCODE pro Motor Management System SIMATIC Distributed I/O SINAMICS Drive Systems Totally Integrated Power PROFIBUS Industrial Ethernet PROFINET AS-Interface TIA is characterized by its unique continuity. It provides maximum transparency at all le vels with reduced interfacing requirements – covering the field level, production control level, up to the corporate management level. With TIA you also profit throughout the complete life cycle of your plant – starting with the initial planning steps through operation up to modernization, where we offer a high measure of investment security resulting from continuity in the further development of our products and from reducing the number of inter- faces to a minimum. The unique continuity is already a defined charact e ristic at the dev elopment stage of our products and systems. The result: maximum interoperability – cov ering the contr oller , HMI, driv es, up to the process control system. This reduces the complexity of the automation solution in your plant. You will experience this, for example, in the engineering phase of the automation solution in the form of reduced time requirements and cost, or during operation using the continuous diagnostics facilities of Totally Integrated Automation for increasing the availability of your plant. © Siemens AG 2008 1/6 Siemens ST 70 · 2009 Integrated power distribution from one source. Totally Integrated Power. © Siemens AG 2008 1/7 Siemens ST 70 · 2009 Products and systems Medium voltage Transformers Low voltage Installation technology Building automation Communication Processes / industrial automation Industrial Ethernet Planning and system configuration ≤ 110 kV IEC 61850 PROFIBUS PROFINET KNX EIB BACnet 03.04.2008 Electrical power distribution in buildings requires integrated solutions. Our response: Totally Integrated Power. This means innovative and integrated, interface-optimized products and systems which have been optimally coordinated and complemented with communication and software modules that link power distribution to building automation or industrial automation. Totally Integrated Power accompanies power distribution projects from one end to the other. From A to Z. From the planning to the building’s use: Totally Integrated Power offers signif- icant advantages in every project stage and to everyone involved in the project – the investors, electrical planning engineers, electricians, users and building facility managers. Our portfolio comprises everything from engineering tools to the matching hardware: from switchgear and distribution systems for medium voltage to transformers, from switching and circuit-protection devices to low-voltage switchgear and busbar trunking systems, as far as to the small distribution board and the wall outlet. It goes without saying that both the medium-voltage switchgear, which requires no maintenance, and the low-voltage switchgear are type-tested, and their busbar connections, too. Comprehensive protection systems ensure the safety of man and machine at any time. © Siemens AG 2008 1/8 Siemens ST 70 · 2009 Introduction Micro Automation LOGO!: Technology with a future which simplifies many things The compact, user-friendly and low-cost solution for simple control tasks. For universal applications in the industry, non-residential buildings or residential buildings. No wiring is necessary since functions are linked. Operates in a similar manner as a PLC. With integrated operator control and display unit for input of alarm message texts / variables direct at the device. Easy operation: • Linking of functions at the click of the mouse at the PC or by pressing a key on the device Minimum expenditure of time: • Only the inputs and outputs need to be wired • Simultaneous wiring diagram generation and control cabinet installation Reduced costs: • Many switchgear technology functions are integrated High flexibility: • Functions are simply modified at the push of a button • Variants for different operating voltages • Modular design, can be expanded at any time Further information can be found at: http://www.siemens.com/logo — = can be used/available n = can not be used/not available LOGO! 24 24o 12/24RC 12/24RCo 24RC 24RCo 230RC 230RCo Supply voltage 24 V DC 12/24 V DC 24 V AC/DC 115/230 V AC/DC Inputs 8 (4 can beused as analog inputs) 8 (4 can beused as analog inputs) 8 8 Outputs 4, transistor 4, relay Continuous current 0,3 A 10 A (under resistive load); 3 A (under inductive load) Short-circuit protection electrical (1 A) external fuse protection required Integrated time switches/power reserve — 8 / typ. 80h Ambient temperature 0 to +55 °C RI suppression to EN 50 011 (limit class B) Degree of protection IP20 Certification to VDE 0631, IEC 1131, FM, Class 1, Div 2, cUlus, C-Tick, CSA, marine approvals Mounting on 35 mm DIN rail or wall mounting Dimensions (W x H x D) 72 × 90 × 55 mm (4 width modules) © Siemens AG 2008 [...]... 230RCo 6ED1 05 6-6 XA0 0-0 BA0 6ED1 05 5-4 MH0 0-0 BA0 6ED1 05 7-1 CA0 0-0 BA0 Adapter cable for analog modem communication 4-line text display, can be connected to all LOGO! 0BA6 Basic and Pure versions, including connecting cable LOGO! manual German 6ED1 05 0-1 AA0 0-0 AE7 English 6ED1 05 0-1 AA0 0-0 BE7 French 6ED1 05 0-1 AA0 0-0 CE7 Spanish 6ED1 05 0-1 AA0 0-0 DE7 Italian 6ED1 05 0-1 AA0 0-0 EE7 Chinese 6ED1 05 0-1 AA0 0-0 KE7 B7: Subject... addressed • Ambient temperature range -4 0 °C to +70 °C with 3 types 2 SIPLUS LOGO! 24o SIPLUS LOGO! 12/24RCo SIPLUS LOGO! 24RCo SIPLUS LOGO! 230RCo Order No 6AG1 05 2-2 CC0 0-2 BA5 6AG1 05 2-2 MD0 0-2 BA5 6AG1 05 2-2 HB0 0-2 BA5 6AG1 05 2-2 FB0 0-2 BA5 Order No based on 6ED1 05 2-2 CC0 0-0 BA5 6ED1 05 2-2 MD0 0-0 BA5 6ED1 05 2-2 HB0 0-0 BA5 6ED1 05 2-2 FB0 0-0 BA5 Ambient temperature range -2 5 +70 °C -2 5 +55 °C (for applications with... Comfort V6.0, manual, screwdriver, information material German 6ED1 05 0-1 AA0 0-0 AE7 English 6ED1 05 0-1 AA0 0-0 BE7 French 6ED1 05 0-1 AA0 0-0 CE7 German B9 6ED1 05 7-3 AA0 2-0 AA0 Spanish 6ED1 05 0-1 AA0 0-0 DE7 English B9 6ED1 05 7-3 AA0 2-0 BA0 Italian 6ED1 05 0-1 AA0 0-0 EE7 LOGO! TD News Box, 12/24 V Chinese 6ED1 05 0-1 AA0 0-0 KE7 LOGO! Memory Card 6ED1 05 6-1 DA0 0-0 BA0 Contains LOGO! 12/24RCo, LOGO! TD, LOGO! USB PC cable, LOGO!... cUL Technical data The technical data are identical with those of the based-on modules SIPLUS LOGO! 24o SIPLUS LOGO! 24RCo SIPLUS LOGO! 230RCo Order No 6AG1 05 2-2 CC0 0-2 BY5 6AG1 05 2-2 HB0 0-2 BY5 6AG1 05 2-2 FB0 0-2 BY5 Order No based on 6ED1 05 2-2 CC0 0-0 BA5 6ED1 05 2-2 HB0 0-0 BA5 6ED1 05 2-2 FB0 0-0 BA5 Ambient temperature range -4 0 +70 °C -2 5 +55 °C (for applications with cUL approval), condensation permissible... atmosphere) Approvals CE, cUL (available soon) Technical data The technical data are identical with those of the based-on modules ■ Technical specifications 6AG1 05 2-2 CC0 0-2 BA5 6AG1 05 2-2 CC0 0-2 BY5 6AG1 05 2-2 MD0 0-2 BA5 6AG1 05 2-2 HB0 0-2 BA5 6AG1 05 2-2 HB0 0-2 BY5 6AG1 05 2-2 FB0 0-2 BA5 6AG1 05 2-2 FB0 0-2 BY5 Supply voltages Rated value • DC 12 V Yes • DC 24 V Yes Yes Yes • DC 115 V Yes • DC 230 V Yes • permissible... Linux, MAC OSX; on CD-ROM 6ED1 05 8-0 CA0 2-0 YE0 Upgrade from V1.0 to V6.0 LOGO! PC cable 6ED1 05 7-1 AA0 0-0 BA0 For program transfer between LOGO! and the PC 6ED1 05 2-1 HB0 0-0 BA6 LOGO! USB PC cable B9 6ED1 05 7-1 AA0 1-0 BA0 For transferring the program between LOGO! and PC, including driver on CD-ROM LOGO! modem cable 6ED1 05 7-1 CA0 0-0 BA0 Adapter cable for analog modem communication 6ED1 05 2-1 FB0 0-0 BA6 Front panel... space-saving basic variants • Interface for the connection of expansion modules, up to 24 digital inputs, 16 digital outputs, 8 analog inputs and 2 analog outputs can be addressed 2 SIPLUS LOGO! 24 SIPLUS LOGO! 12/24RC SIPLUS LOGO! 24RC SIPLUS LOGO! 230RC Order No 6AG1 05 2-1 CC0 0-2 BA5 6AG1 05 2-1 MD0 0-2 BA5 6AG1 05 2-1 HB0 0-2 BA5 6AG1 05 2-1 FB0 0-2 BA5 Order No based on 6ED1 05 2-1 CC0 0-0 BA5 6ED1 05 2-1 MD0 0-0 BA5... capability LOGO! logic module 24RCo LOGO! PROM 6ED1 05 2-2 HB0 0-0 BA6 B7 6AG1 05 7-1 AA0 1-0 BA6 LOGO!Soft Comfort V6.0 B8 6ED1 05 8-0 BA0 2-0 YA0 For programming on the PC in LAD/FBD; executes on Windows 98 SE and higher, Linux, MAC OSX; on CD-ROM LOGO!Soft Comfort V6.0 upgrade 6ED1 05 8-0 CA0 2-0 YE0 Upgrade from V1.0 to V6.0 6ED1 05 2-2 FB0 0-0 BA6 LOGO! PC cable 6ED1 05 7-1 AA0 0-0 BA0 For program transfer between LOGO! and the... automation, safety technology and motion control can also be integrated into an S 7-3 00 PLC • Isochronous mode on PROFIBUS Further information can be found at: http://www.siemens.com/simatic-s 7-3 00 SIMATIC S 7-3 00, CPU 312C/313C 313C-2 PtP/ 313C-2 DP 314C-2 PtP/ 314C-2 DP 315F-2 DP/ 315F-2 PN/DP 317F-2 DP/ 317F-2 PN/DP 319F-3 PN/DP Memory Instructions 32/64 KB 10/21 K 64 KB 21 K 96 KB 32 K 192/256 KB 36/50... • Safety engineering and standard automation can be integrated into a single S 7-4 00 controller; plant availability can be increased through the redundant structure of the S 7-4 00 Further information can be found at: http://www.siemens.com/simatic-s 7-4 00 SIMATIC S 7-4 00, CPU 41 6-3 PN/DP 41 7-4 41 2-3 H 41 4-4 H 41 7-4 H 416F-2 416F-3 PN/DP Memory Instructions 11.2 MB 1840 K 30 MB 5M 768 KB 128 K 2.8 MB 460 K . E86060-K6710-A101-B 6-7 600 SIMATIC HMI ST 80 Human Machine Interface Systems E86060-K4680-A101-B 6-7 600 PC-based Automation ST PC Embedded Automation and PC-based Automation E86060-K4670-B101-B 9-7 600 SIMATIC. Automation E86060-K8310-A101-A 5-7 600 SITRAIN ITC Training for Automation and Industrial Solutions E86060-K6850-A101-B9 (in Ger man) Products for CA 01 Automation and Drives Interactive catalog E86060-D4001-A510-C 7-7 600 Mall Information. used/not available SIMATIC S 7-3 00, CPU 312C/313C 313C-2 PtP/ 313C-2 DP 314C-2 PtP/ 314C-2 DP 315F-2 DP/ 315F-2 PN/DP 317F-2 DP/ 317F-2 PN/DP 319F-3 PN/DP Memory 32/64 KB 64 KB 96 KB 192/256 KB 1