HiPath 3000/5000 Version 4.0 Service Manual Important information System Data Boards for HiPath 3000 HiPath 3000/5000 Version 4.0 Installation HiPath 3000 Startup HiPath 3000 Startup and Administration HiPath 5000 RSM Service Manual Startup HiPath 3000 as a Gateway Expanding, Upgrading of HiPath 3000 Workpoint Clients HiPath Cordless Office Service IP Fundamentals System Programming Codes (Expert Mode Codes) P31003-H3540-S403-3-7620 Codes for Activating/Deactivating Features IP Protocols and Port Numbers used with HiPath 3000/5000 V4.0 10 11 12 A B C hp3hp5shTOC.fm Contents Contents Figures 0-15 Tables 0-23 Important information 1-1 1.1 Overview 1-1 1.2 Important information 1-2 1.2.1 Structure of This Service Manual 1-2 1.2.2 Connection area 1-4 1.2.3 Safety Information 1-5 1.2.3.1 Safety Information: Dangers 1-6 1.2.3.2 Safety Information: Warnings 1-8 1.2.3.3 Safety information: Cautions 1-9 1.2.3.4 General information 1-10 1.2.3.5 Emergencies 1-12 1.2.3.6 Reporting Accidents 1-12 1.2.3.7 Safety Information for Australia 1-13 1.2.4 Privacy and Data Security 1-14 1.2.5 Related Documents 1-15 1.2.6 Information on the Intranet 1-16 1.3 Important Notices (for U.S and Canada only) 1-18 1.3.1 Safety 1-18 1.3.1.1 General Safety 1-18 1.3.1.2 Safety With Electricity 1-18 1.3.1.2.1 High Voltages 1-18 1.3.1.2.2 Equipment Room 1-19 1.3.1.2.3 Emergencies 1-20 1.3.1.3 Reporting Accidents 1-20 1.3.2 About This Book 1-20 1.3.2.1 Prerequisite Knowledge 1-21 1.3.2.2 How to Use This Book 1-22 1.3.2.3 Related Information 1-23 1.3.3 FCC and Industry Canada Compliance 1-23 1.3.3.1 FCC Compliance 1-24 1.3.3.1.1 FCC Rules, Part 15 1-24 1.3.3.1.2 FCC Rules, Part 68 1-25 1.3.3.2 Industry Canada Compliance 1-32 1.3.3.2.1 REN 1-32 1.3.3.2.2 Equipment Attachment Limitations 1-32 System Data 2-1 2.1 Overview 2-1 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual 0-1 hp3hp5shTOC.fm Contents 2.2 Introduction to HiPath 3000/5000 V4.0 2-2 2.3 HiPath 3000 2-5 2.3.1 Introduction 2-5 2.3.2 Design and Dimensions of the HiPath 3000 Systems 2-6 2.3.2.1 Design and Dimensions of the HiPath 3750 2-6 2.3.2.2 Design and Dimensions of the HiPath 3550 2-8 2.3.2.3 Design and Dimensions of the HiPath 3350 2-9 2.3.2.4 Design and Dimensions of the HiPath 3700 2-10 2.3.2.5 Design and Dimensions of the HiPath 3500 2-11 2.3.2.6 Design and Dimensions of the HiPath 3300 2-12 2.3.3 System Environment of the HiPath 3000 Systems 2-13 2.3.3.1 HiPath 3750 and HiPath 3700 System Environment 2-13 2.3.3.2 HiPath 3550System Environment 2-14 2.3.3.3 System Environment HiPath 3350 2-15 2.3.3.4 System Environment HiPath 3500 2-16 2.3.3.5 System Environment HiPath 3300 2-17 2.4 HiPath 5000 RSM 2-18 2.5 System-Related Capacity Limits HiPath 3000/5000 2-19 2.6 Technical Specifications HiPath 3000 2-21 2.7 Interface-to-Interface Ranges 2-22 2.8 Numbering Plan for HiPath 3000/5000 2-23 2.9 Technical Specifications and Compliance to HiPath 3000 2-24 2.9.1 CE Compliance (not for U.S.) 2-24 2.9.2 U.S and Canadian Regulatory Compliance 2-24 2.9.3 SAFETY International 2-24 2.9.4 Environmental Conditions 2-25 Boards for HiPath 3000 3-1 3.1 Overview 3-1 3.2 Central Boards 3-21 3.2.1 CBCC and CBRC 3-21 3.2.2 CBCP (for Deutsche Telekom AG Only) 3-29 3.2.3 CBCPR 3-34 3.2.4 CMA 3-37 3.2.5 CMS 3-38 3.2.6 CR8N 3-42 3.2.7 CUC and CUCR 3-44 3.2.8 CUP and CUPR 3-45 3.2.9 IMODC 3-46 3.2.10 LIM 3-47 3.2.11 MMC16 3-50 3.2.12 PSUP 3-51 3.2.13 UPSC-D 3-52 3.2.14 UPSC-DR 3-57 3.2.15 UPSM 3-63 0-2 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual hp3hp5shTOC.fm Contents 3.3 Peripheral Boards 3-70 3.3.1 HXGM and HXGM2 3-70 3.3.2 HXGS2, HXGS2, HXGSR (not for U.S.), HXGSR2 3-76 3.3.3 IVML8 and IVML24 3-79 3.3.4 IVMP8 and IVMP8R (Not for U.S.) 3-83 3.3.5 IVMS8 and IVMS8R 3-87 3.3.6 SLA8N (Not for U.S.), SLA16N, and SLA24N 3-92 3.3.7 SLC16 and SLC16N (Not for U.S.) 3-99 3.3.8 SLMO8 (Not for U.S.) and SLMO24 3-115 3.3.9 SLU8 3-121 3.3.10 SLU8R 3-123 3.3.11 STLS2 (Not for U.S.) and STLS4 3-124 3.3.12 STLS4R 3-131 3.3.13 STMD8 3-133 3.3.14 TIEL 3-143 3.3.15 TLA2 and TLA4 and TLA8 (Not for U.S.) 3-158 3.3.16 TLA4R 3-160 3.3.17 TMAMF (for selected countries only) 3-162 3.3.18 TMCAS (for selected countries only) 3-166 3.3.19 TMDID8 (for U.S Only) 3-176 3.3.20 TMGL4 (for U.S Only) 3-179 3.3.21 TMGL4R (for U.S only) 3-181 3.3.22 TMGL8 (for U.S Only) 3-183 3.3.23 TML8W (Not for U.S.) 3-185 3.3.24 TMOM (Not for U.S.) 3-188 3.3.25 TMQ4 (for U.S Only) 3-194 3.3.26 TMST1 (for U.S Only) 3-196 3.3.27 TMS2 (Not for U.S.) 3-199 3.3.28 TST1 (for U.S Only) 3-206 3.3.29 TS2 and TS2R (Not for U.S.) 3-208 3.3.30 4SLA (Not for U.S.), 8SLA, (for All Countries) and 16SLA (Not for U.S.) 3-213 3.3.31 8SLAR 3-217 3.4 Options 3-219 3.4.1 ALUM4 3-219 3.4.2 ANI4 (for U.S Only) 3-223 3.4.3 ANI4R (for U.S Only) 3-227 3.4.4 Announcement and Music Modules 3-228 3.4.5 EXMNA (for U.S Only) 3-230 3.4.6 GEE8 (Not for U.S.) 3-232 3.4.7 GEE12, GEE16, and GEE50 (Not for U.S.) 3-233 3.4.8 HOPE Board 3-235 3.4.9 OPAL and OPALR 3-237 3.4.10 PFT1 and PFT4 (Not for U.S.) 3-239 3.4.11 REAL 3-242 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual 0-3 hp3hp5shTOC.fm Contents 3.4.12 3.4.13 3.4.14 3.4.15 3.4.16 STBG4 (For France Only) STRB and STRBR V24/1(Not for U.S.) V.24 Adapter V.24 Cable 3-246 3-247 3-252 3-254 3-255 Installation HiPath 3000 4-1 4.1 Overview 4-1 4.2 HiPath 3750 and HiPath 3700 Installation 4-2 4.2.1 Installation Prerequisites 4-2 4.2.2 Installation Procedure 4-3 4.2.3 HiPath 3750 Installation 4-5 4.2.3.1 Selecting the Installation Site 4-6 4.2.3.1.1 AC Power (for U.S Only) 4-7 4.2.3.2 Unpacking the Components 4-8 4.2.3.3 Mounting the Main Distribution Frame (MDFU or MDFU-E) (Not for U.S.) 4-9 4.2.3.4 Setting up the System Cabinets 4-10 4.2.3.4.1 Overview 4-10 4.2.3.4.2 Removing the Cabinet Covers 4-11 4.2.3.4.3 Setting Up a One-Cabinet System 4-12 4.2.3.4.4 Setting Up a Stacked Two-Cabinet System 4-15 4.2.3.4.5 Setting Up a Two-Cabinet System Side by Side 4-21 4.2.3.4.6 Setting Up a Stacked Three-Cabinet System 4-22 4.2.3.4.7 Installing the Seismic Anchors (for U.S Only) 4-24 4.2.3.5 Grounding the System 4-26 4.2.3.5.1 Not for U.S.: Grounding the System 4-26 4.2.3.5.2 For U.S Only: Grounding the System 4-29 4.2.3.6 Checking the Protective Grounding 4-31 4.2.3.7 Connecting the Cables to the Backplane 4-32 4.2.3.7.1 Backplanes of the “8-Slot” Cabinets 4-32 4.2.3.7.2 Connection Between the MDFU or MDFU-E and Backplane 4-36 4.2.3.8 Laying the Line Network and Setting Jumpers on the MDFU or MDFU-E 4-41 4.2.4 HiPath 3700 Installation (19-Inch Cabinet) 4-46 4.2.4.1 Selecting the Installation Site 4-47 4.2.4.1.1 AC Power (for U.S Only) 4-47 4.2.4.2 Unpacking the Components 4-47 4.2.4.3 Mounting the System Cabinet in the 19-Inch Cabinet 4-48 4.2.4.3.1 Removing the Cabinet Covers 4-48 4.2.4.3.2 Mounting the System Cabinet with Angle Brackets 4-50 4.2.4.4 Mounting the Patch Panel in the 19-Inch Cabinet 4-52 4.2.4.5 Grounding the System 4-53 4.2.4.6 Checking the Protective Grounding 4-55 4.2.4.7 Connecting the Cable to the Backplane 4-56 4.2.4.7.1 Backplanes of the “8-Slot” Cabinets 4-56 4.2.4.7.2 Connecting the Patch Panel and Backplane (in the 19-Inch Cabinet) 4-60 0-4 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual hp3hp5shTOC.fm Contents 4.2.4.8 Connecting the Line Network to the Patch Panel 4-68 4.2.5 Loading the System Software and Inserting Subboards on the Central Control Board 4-69 4.2.6 Configuration Notes 4-70 4.2.6.1 Inserting and Removing Boards 4-77 4.2.7 Connecting Workpoint Clients 4-78 4.2.8 Make Trunk Connections 4-78 4.2.9 Performing a Visual Inspection 4-79 4.3 HiPath 3550, HiPath 3350, HiPath 3500 and HiPath 3300 Installation 4-80 4.3.1 Installation Prerequisites 4-80 4.3.2 Installation Procedure 4-81 4.3.3 HiPath 3550 and HiPath 3350 Installation 4-82 4.3.3.1 Selecting the Installation Site 4-82 4.3.3.1.1 AC Power (for U.S Only) 4-84 4.3.3.2 Unpacking the Components 4-84 4.3.3.3 Mounting the Main Distribution Frame (HiPath 3550 only) (Not for U.S.) 4-85 4.3.3.4 Remove System Housing Cover 4-87 4.3.3.5 Attaching the System to the Wall 4-89 4.3.3.6 Grounding the System and the External Main Distribution Frame 4-90 4.3.3.7 Installing the Boards 4-92 4.3.3.8 Laying the Line Network and Connecting Cables 4-93 4.3.3.9 Attaching Ferrite 4-97 4.3.3.10 Configuration Notes 4-99 4.3.3.11 Connecting Workpoint Clients 4-102 4.3.3.12 Make Trunk Connections 4-102 4.3.3.13 Conducting a Visual Inspection 4-102 4.3.4 HiPath 3500 and HiPath 3300 Installation (19-Inch Housing) 4-103 4.3.4.1 Installation Versions 4-103 4.3.4.2 Selecting the Installation Site 4-104 4.3.4.2.1 AC Power (for U.S Only) 4-104 4.3.4.3 Unpacking the Components 4-105 4.3.4.4 Attaching a HiPath 3500 or HiPath 3300 to the Wall (19-Inch Housing) (Not for U.S.) 4-106 4.3.4.5 Installing a HiPath 3500 or HiPath 3300 in a Cabinet 4-107 4.3.4.6 Grounding the System 4-109 4.3.4.7 Installing the Boards 4-110 4.3.4.8 Connecting Cables and the Line Network 4-111 4.3.4.9 Configuration Notes 4-112 4.3.4.10 Connecting Workpoint Clients 4-114 4.3.4.11 Make Trunk Connections 4-114 4.3.4.12 Performing a Visual Inspection 4-114 Startup HiPath 3000 5-1 5.1 Overview 5-1 5.2 HiPath 3750 and HiPath 3700 Startup 5-2 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual 0-5 hp3hp5shTOC.fm Contents 5.2.1 Startup Procedure 5-2 5.2.2 Supplying the System With Power 5-3 5.2.2.1 Assigning Station Numbers 5-4 5.2.3 Carrying Out a System Reload 5-6 5.2.4 Carrying Out the Country Initialization and Selecting the Password Type 5-6 5.2.5 Entering the System Number (Not for U.S.) 5-8 5.2.6 Conducting Customer-Specific Programming 5-9 5.2.7 Carrying Out a System Check 5-9 5.3 HiPath 3550, HiPath 3350, HiPath 3500, HiPath 3300 Startup 5-10 5.3.1 Startup Procedure 5-10 5.3.2 Supplying the System With Power 5-11 5.3.2.1 Assigning Station Numbers 5-12 5.3.3 Carrying Out a System Reload 5-14 5.3.4 Carrying Out the Country Initialization and Selecting the Password Type 5-14 5.3.5 Entering the System Number (Not for U.S.) 5-16 5.3.6 Conducting Customer-Specific Programming 5-17 5.3.7 Carrying Out a System Check 5-17 Startup and Administration HiPath 5000 RSM 6-1 6.1 Overview 6-1 6.2 Introduction 6-3 6.3 Prerequisites for the installation 6-5 6.4 Starting Up HiPath 5000 RSM 6-7 6.4.1 Preparing the Installation 6-7 6.4.2 Integrating the HiPath 5000 RSM server in the LAN 6-7 6.4.3 Installing HiPath 5000 RSM Components 6-8 6.4.3.1 Installation Routine – Overview 6-8 6.4.3.2 Starting the Installation 6-10 6.4.3.2.1 Installing the HiPath 5000 RSM Server 6-10 6.4.3.2.2 Installing the TAPI Service Provider 6-13 6.4.3.2.3 Creating Backup Directories and Jobs 6-14 6.4.3.3 Installing Individual Components 6-14 6.4.3.4 Basic Configuration of HiPath 5000 RSM Server 6-15 6.4.3.4.1 Importing Basic Server Configuration 6-15 6.4.3.4.2 Adding Individual Nodes 6-16 6.4.3.5 Checking Installation 6-18 6.4.3.5.1 Checking Web Sharing for PCM Directory 6-18 6.4.3.5.2 Checking or Manually Configuring DCOM Component Properties 6-19 6.4.3.5.3 Checking services 6-22 6.4.3.6 Updating HiPath 5000 RSM Components 6-23 6.4.4 Installing the TAPI Service Provider 6-24 6.4.4.1 Installing the HiPath TAPI 170 Service Provider 6-24 6.4.4.2 Connecting Media Streaming (Not for U.S.) 6-25 6.4.4.2.1 Installing the MEB Service Provider (Not for U.S.) 6-25 6.4.4.2.2 Configuring the MEB Service Provider (Not for U.S.) 6-26 0-6 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual hp3hp5shIX.fm error messages 11-28 error signaling interval 11-57 ESM structure 1-2 Euro-ISDN–CAS-Gateway ECG 3-166, 3-199, 3-208 event log 11-25 HiPath 5000 RSM error 11-36 event viewer 11-25 HiPath 5000 RSM error 11-36 exchanging boards 11-8 exchanging telephones 11-8 exchanging workpoint clients 11-8 EXM contact assignments 3-231 slot for HiPath 3550 and HiPath 3350 3-229 EXMNA (for U.S Only) 3-230 slot for HiPath 3550 and HiPath 3350 3-231 EXMR connection to HiPath 3500 and HiPath 3300 3-229 expansion cabinet ECR, connecting cable 4-111 expansion cabinet ECR, installing 8-5 expert mode codes account code A-4 analog CO interface A-17 announcement/music A-21 attendant console A-28 call detail recording A-3 codes A-20 configure station A-4 DISA A-28 displays A-11 entrance phones A-20 incoming calls A-7 ISDN parameters A-11 least cost routing (LCR) A-28 networking A-9 print CDB data A-22 radio paging equipment A-27 relays A-21 Z-4 remote administration A-26 sensors A-22 system characteristics A-22 system settings A-17 system speed dial A-3 toll restriction A-6 traffic restriction A-10 UCD A-26 extension connection 10-9 external power supply EPSU2 3-111 external power supply EPSU2-R 8-15 F fan connection (in ECR) 8-17 FCC and Industry Canada Compliance 1-23 FCC compliance 1-24 FCC registration number 2-24 FCC rules 1-24 ferrite for HiPath 3550/HiPath 3350 4-97 ferrite sleeve for HiPath 3550/HiPath 3350 4-97 field-replaceable units (for U.S only) all models 3-7 HiPath 3300 3-20 HiPath 3350 3-15 HiPath 3500 3-18 HiPath 3550 3-13 HiPath 3750/HiPath 3700 3-10 firewall C-1 FRUs (for U.S only) all models 3-7 G gateway HiPath 3300 7-6 HiPath 3500 7-4 HiPath 3700 7-2 gateway connection (HiPath HG1500) 9-49 gateway functionality (HiPath HG1500) 9-49 GEE12/GEE16/GEE50 3-233 contact assignments 3-234 interfaces 3-233 module 3-233 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual hp3hp5shIX.fm GEE8 3-232 figure 3-232 level setting 3-232 general safety 1-18 GetAccount 6-4, 6-77 automatic path selection 6-84 carrier 6-80 Gigaset 3000 Comfort 9-57 Gigaset 3000 Micro 9-58 Gigaset 4000 Comfort 9-59 Gigaset 4000 Micro 9-61 Gigaset active 9-56 ground loops HiPath 3700 4-55 HiPath 3750 4-26 grounding HiPath 3500/3300 4-109 HiPath 3750 system cabinets (for U.S only) 4-29 H H.323 protocol 12-2 hazards 1-21 HDLC segments for HiPath 3750 and HiPath 3700 4-74 help for installation (HiPath 3700) 4-2 for installation (HiPath 3750) 4-2 Hicom Office PhoneMail Entry board 3-235 HiPath 3000 2-2, 2-5 HiPath 3000 upgrade 8-25 HiPath 3000/5000 capacity limits 2-19 HiPath 3150 2-5 HiPath 3250 2-5 HiPath 3300 as a gateway 7-6 construction data 2-12 FRUs for U.S 3-20 installation 4-80 startup 5-10 system environment 2-17 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual HiPath 3350 construction data 2-9 FRUs for U.S 3-15 installation 4-80 numbering plan (for Deutsche Telekom AG only) 3-33 startup 5-10 system environment 2-15 HiPath 3500 as a gateway 7-4 construction data 2-11 FRUs for U.S 3-18 installation 4-80 numbering plan 3-28 startup 5-10 system environment 2-16 HiPath 3550 construction data 2-8 FRUs for U.S 3-13 installation 4-80 numbering plan 3-28 startup 5-10 system environment 2-14 HiPath 3700 as a gateway 7-2 construction data 2-10 FRUs for U.S 3-10 installation 4-2 startup 5-2 system environment 2-13 HiPath 3750 construction data 2-6 FRUs for U.S 3-10 installation 4-2 startup 5-2 system environment 2-13 HiPath 500 2-5 Z-5 hp3hp5shIX.fm HiPath 5000 RSM 2-2, 2-18, 6-1 administration 6-46 connecting an UPS 6-96 extensions 6-60 HiPath trace monitor 6-86 licensing 6-33 nodes 6-57 prerequisites 6-5 RAM requirements 6-5 HiPath AP 1100 9-45 HiPath AP 1140 9-45 HiPath Cordless Office 10-1 base station power supply 3-107 base stations 10-2 capacity limits 10-6 configuring 9-63 EPSU2 external power supply 3-111 extension connection 10-9 login window 9-63 mobile telephone 9-56 multi-SLC 10-9 networking among systems 10-9 outdoor cover 10-5 single-cell BS 3-103, 10-2, 10-3 SLC16/SLC16N 3-99 system configuration 10-3 system number 3-99 system numbers 9-63 tech base station data 10-4 HiPath Fault Management 11-27 HiPath HG1500 boards 3-70, 3-76 determining the required number 9-46 techn data (resources) 9-46 HiPath HG1500 capacity limits 9-47 HiPath HG1500 licensing 6-43 HiPath Inventory Server 11-14 HiPath server administration 6-46 HiPath Software Viewer 11-14 HiPath trace monitor 6-86 HOPE board 3-235 hospital use (HiPath 3750) 4-24 hot plugging 8-2 Z-6 HXGM/HXGM2 3-70 determining the required number 9-46 interfaces 3-71 LAN adapter cable for backplane (U.S only) 3-75 LAN adapter connector for backplane 3-74 LAN interfaces 3-73 LED statuses 3-72 techn data (resources) 9-46 V.24 interface 3-72 versions 3-70 HXGS/HXGS2 3-76 determining the required number 9-46 interfaces 3-77 LAN interfaces 3-78 techn data (resources) 9-46 V.24 interface 3-78 versions 3-76 HXGSR/HXGSR2 3-76 determining the required number 9-46 interfaces 3-77 LAN interfaces 3-78 techn data (resources) 9-46 V.24 interface 3-78 versions 3-76 I IMODC 3-46, 11-54 Industry Canada certification number 2-24 information on the intranet 1-16 initializing boards (HiPath 3700) 4-72 initializing boards (HiPath 3750) 4-72 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual hp3hp5shIX.fm installation (HiPath 3500/3300) 4-80, 4-103 grounding the system 4-109 HiPath 3300 slots 4-113 HiPath 3500 slots 4-112 installation in a 19-inch cabinet 4-107 installation location 4-104 installation versions 4-103 procedure 4-81 tools and help 4-80 unpacking components 4-105 visual inspection 4-114 wall installation 4-106 installation (HiPath 3550/HiPath 3350) 4-80, 4-82 attach ferrite 4-97 attaching the system to the wall 4-89 connecting the cable 4-93 HiPath 3350 slots 4-101 HiPath 3350 system overview 4-101 HiPath 3550 slots 4-100 HiPath 3550 system overview 4-99 installation site 4-82 MDFU 4-85, 4-90 procedure 4-81 tools and help 4-80 unpacking the components 4-84 visual inspection 4-102 installation (HiPath 3700) 4-2, 4-46 checking grounding 4-55 connecting cable between BC and EC 4-58 connecting the cable 4-56 grounding 4-53 help, tools 4-2 installation site 4-47 loading the system software 4-69 mounting the patch panel 4-52 mounting the system cabinet 4-48 procedure 4-3 removing the cabinet covers 4-48 stripping the open-end cable 4-66 unpacking the components 4-47 visual inspection 4-79 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual installation (HiPath 3750) 4-2, 4-5 checking the protective grounding 4-31 connecting cable between BC and EC 4-34 connecting the cable 4-32 earth ground 4-29 freestanding installation base elements 4-20 secondary protection 4-45 wall mounting for two cabinets stacked 4-17 grounding 4-26 help, tools 4-2 installation site 4-6 jumpering 4-41 line network 4-41 loading the system software 4-69 MDFU/MDFU-E 4-9 procedure 4-3 protective grounding (for U.S Only) 4-29 removing cabinet covers 4-11 seismic anchors 4-24 setting up system cabinets 4-10 single-cabinet 4-12 stripping the open-end cable for MDFU/ MDFU-E 4-39 three-cabinet stacked 4-22 two cabinets side by side 4-21 two cabinets stacked 4-15 unpacking the components 4-8 visual inspection 4-79 wall mounting for one cabinet 4-12 installing an expansion cabinet rack (ECR) 8-5 integrated modem 3-46, 11-54 Interface-to-interface ranges 2-22 IP network requirements 12-2 IP payload switching (HiPath HG1500) 9-48 IP protocols C-1 ISDN S0 interface connection 3-128 terminal connection (not for U.S.) 3-129 trunk connection (not for U.S.) 3-128 Z-7 hp3hp5shIX.fm ISDN adapter STLS4 wiring 3-127 STMD8 wiring 3-142 ISDN message decoder 11-23 ISDN routing (HiPath HG1500) 9-49 ISDN S0 bus from STLS4 or ISDN adapter 3-127 from STMD8 or ISDN Adapter 3-142 HiPath 3550 and HiPath 3350 general information 9-69 point-to-multipoint long 9-72 point-to-multipoint short 9-71 point-to-point 9-70 ISDN S0 wiring HiPath 3550 and HiPath 3350 general information 9-69 point-to-multipoint long 9-72 point-to-multipoint short 9-71 point-to-point 9-70 IVML8/IVML24 3-79 figure 3-80 LAN adapter 3-82 LED statuses 3-81 lockout switch 3-80 packing protection covering 3-79 IVMP8/IVMP8R 3-83 figure 3-84 LAN connector assignment 3-85 LED statuses 3-86 lockout switch 3-84 packing protection covering 3-83 IVMS8/IVMS8R 3-87 figure 3-88 LAN connector assignment 3-90 LED statuses 3-91 lockout switch 3-88 packing protection covering 3-87 J jumper strips assignment 4-42 Z-8 K key assignment 9-4 keyed holes for mounting HiPath 3750 4-12, 4-17 L LAN adapter cable for backplane HiPath 3750/HiPath 3700 (U.S only) 3-75 LAN adapter connector for backplane HiPath 3750/HiPath 3700 3-74 licensing 6-33, 11-16 CMD 6-43 CSP 6-43 HiPath 5000 RSM 6-33 HiPath HG1500 6-43 Media Streaming 6-41 TAPI service provider 6-37 LIM 3-47 list of available documents 1-15 local power supply 9-30 connection example 9-31 LOG area 11-66, 11-69 M MAC ID 6-33, 6-37 main distribution frame (HiPath 3550) installation 4-85 main distribution frame (HiPath 3550/HiPath 3350) 4-90 cables 4-96 protective grounding 4-90 main distribution frame (HiPath 3750) jumpering 4-41 layout and dimensions 4-43 mounting 4-9 MDF (HiPath 3550/HiPath 3350) cables 4-96 MDFU (HiPath 3550) grounding 4-90 installation 4-85 MDFU/MDFU-E (HiPath 3750) jumpering 4-41 layout and dimensions 4-43 mounting 4-9 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual hp3hp5shIX.fm MEB service provider 6-4, 6-25 licensing lines 6-41 Media Extension Bridge service provider 6-4 Media Streaming 6-4, 6-25 licensing lines 6-41 memory backup 11-3 minimum clearances HiPath 3550/HiPath 3350 4-83 HiPath 3750 4-6 MMC 3-50 replace 11-9 mobile telephone checking the login status 9-66 log off 9-66 mounting one cabinet on the wall (HiPath 3750) 4-12 two stacked cabinets on the wall (HiPath 3750) 4-17 mounting holes HiPath 3750 4-12, 4-17 mounting space HiPath 3550/HiPath 3350 4-83 HiPath 3750 4-6 multimedia card MMC 3-50 multi-SLC 10-9 N network analysis 12-6 network termination cable set for Spain/Portugal (HiPath 3550 and HiPath 3500) 3-212 connecting S0 3-135 S2M 3-202 power feeding (S2M, HiPath 3550 and HiPath 3500) 3-211 power feeding (S2M, HiPath 3750/HiPath 3700) 3-202 S2M connection (HiPath 3550 and HiPath 3500) 3-211 networking HiPath 4000 CorNet-N connection 3-128 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual NT connection power feeding (S2M, HiPath 3550 and HiPath 3500) 3-211 power feeding (S2M, HiPath 3750/HiPath 3700) 3-202 S2M (HiPath 3550 and HiPath 3500) 3-211 number for CS-03 certification 2-24 for FCC registration 2-24 ringer equivalency 2-24 numbering plan 2-23 numbering plan (HiPath 3350/HiPath 3300) 5-12 numbering plan (HiPath 3550/HiPath 3500) 5-12 numbering plan (HiPath 3750 and HiPath 3700) 5-4 O offline programming 5-9, 5-17 OPAL 3-237 OPALR 3-237 open-end cable (HiPath 3700) for patch panel 4-66 open-end cable (HiPath 3750) for MDFU/ MDFU-E 4-39 operating conditions 2-25 optiClient 130 4.0 9-39 optiClient attendant 9-54 optiLog 4me 9-37 options 3-6 optiPoint 400 economy 3.0 9-44 optiPoint 400 standard 3.0 9-42 Z-9 hp3hp5shIX.fm optiPoint 500 9-3 adapters acoustic adapter 9-24 analog adapter 9-20 configurations 9-28 ISDN adapter 9-21 phone adapter 9-22 recorder adapter 9-27 slots 9-19 BLF 9-16 connections 9-13 key module 9-15 local power supply 9-30 connection example 9-31 part numbers, accessories 9-30 telephones advance 9-9 basic 9-7 connecting 9-12 connection requirements 9-11 economy 9-6 entry 9-5 standard 9-8 standard SL (for U.S only) 9-8 USB 1.1 interface 9-14 optiPoint 600 office 9-34 optiPoint attendant 9-53 optiPoint BLF 9-16 optiPoint key module 9-15 optiset E privacy module 9-38 outdoor cover 10-5 outlet requirements HiPath 3500/HiPath 3300 4-104 HiPath 3550/HiPath 3350 4-84 HiPath 3700 4-47 HiPath 3750 4-7 overview of boards HiPath 3300 3-19 HiPath 3350 3-14 HiPath 3500 3-17 HiPath 3550 3-11 HiPath 3700 3-8 HiPath 3750 3-8 Z-10 P part numbers all boards 3-1, 3-8 all components 3-1, 3-8 backplanes (HiPath 3700) 4-58, 4-59 backplanes (HiPath 3750) 4-34, 4-35 cabinets (HiPath 3700) 4-58, 4-59 cabinets (HiPath 3750) 4-34, 4-35 CABLUs, open-end cables (HiPath 3700) 4-60 CABLUs, open-end cables (HiPath 3750) 4-36 connecting cables (HiPath 3700) 4-58, 4-59 connecting cables (HiPath 3750) 4-34, 4-35 password 11-59 password type 5-14 password type (HiPath 3750 and HiPath 3700) 5-6 patch panel 4-60, 4-62 payload switching (HiPath HG1500) 9-48 PCM segments for HiPath 3750 and HiPath 3700 4-74 peripheral boards 3-3 personal call management PCM 6-70 PFT1/PFT4 3-239 assignment 3-241 installation location 3-240 trunk failure transfer 3-239 pin assignments of V.24 sockets 3-253 pin out of CSTA/V.24 cable 3-255 port numbers C-1 potential hazards sources 1-21 power failure transfer REAL 3-242 power feeding external applications 3-242, 3-244 NT (HiPath 3550 and HiPath 3500) 3-211 NT (HiPath 3750/HiPath 3700) 3-202 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual hp3hp5shIX.fm power outlet requirements HiPath 3500/HiPath 3300 4-104 HiPath 3550/HiPath 3350 4-84 HiPath 3700 4-47 HiPath 3750 4-7 power supply HiPath 3300 3-57 HiPath 3350 3-51, 3-52 HiPath 3500 3-57 HiPath 3550 3-52 HiPath 3750/HiPath 3700 3-63 printer connection 8-4 privacy 1-14 protection, secondary HiPath 3750 4-45 protective grounding HiPath 3700 4-53 checking 4-55 HiPath 3750 4-26 checking 4-31 HiPath 3750 (for U.S Only) 4-29 protocols 12-2 PSUP 3-51 interfaces (S30122-K5658-M) 3-51 Q quality of service QoS 12-4 R radio paging equipment 3-190 TMOM PSE interface 3-191 PSE signals 3-190 ranges CorNet-N 2-22 telephone interface to interface 2-22 trunk 2-22 REAL 3-242 cable and connector assignment 3-245 electrical relay data 3-243 installation location 3-243 power failure transfer 3-242 relay contacts 3-244 special connections 3-242 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual recommended configuration (HiPath 3700) 4-73 recommended configuration (HiPath 3750) 4-73 registration number for FCC 2-24 reinitialization for expansions (HiPath 3550/HiPath 3500/HiPAth 3350/3300) 5-13 for expansions (HiPath 3750 and HiPath 3700) 5-5 procedure (HiPath 3350/HiPath 3300/HiPath 3500/HiPath 3550) 5-13 procedure (HiPath 3750 and HiPath 3700) 5-5 related documents 1-15 related information manuals and guides (for U.S only) 1-23 reload 5-6, 5-14 remote access immediately after installation 11-56 remote administration 11-55 remote connection, controlled release 11-58 remote service 11-53 repairs 1-24 reporting accidents 1-12, 1-20 requirements for hospital use (HiPath 3750) 4-24 reset board 3-80, 3-84, 3-88 ring generator settings (UPSM, -A100) 3-67 settings (UPSM, -S100) 3-66 ringer equivalency number 2-24 routing (HiPath HG1500) 9-49 RS-232 contact assignments 3-253 rules FCC 1-24 Z-11 hp3hp5shIX.fm S S0 bus from STLS4 or ISDN adapter 3-127 from STMD8 or ISDN adapter 3-142 HiPath 3550 and HiPath 3350 general information 9-69 point-to-point 9-70 point-to-multipoint long 9-72 point-to-multipoint short 9-71 safety information 1-5 caution 1-9 danger 1-6 general 1-18 high voltages 1-18 warning 1-8 with electricity 1-18 safety information for Australia 1-13 safety symbols 1-5, 1-21 secondary protection (HiPath 3750) 4-45 security 11-59 seismic anchoring (HiPath 3750) 4-24 service 1-24, 11-1 service and repairs 1-24 service call using a code 11-56 service maintenance release SMR 11-12 shift key 9-4 Siemens intranet 1-16 signal order from MDF cables (HiPath 3550/ HiPath 3350) 4-96 single-cell base station 3-103, 10-2, 10-3 SLA8N/SLA16N/SLA24N 3-92 cable and connector assignment 3-94 cable and connector assignment (for U.S only) 3-96 connection conditions 3-98 LED statuses 3-93 switches and LEDs 3-92 Z-12 SLC16/SLC16N 3-99 base station power supply 3-105 cable and connector assignment 3-102 distribution in HiPath 3750 and HiPath 3700 cabinets 3-104 figure 3-100 LED statuses 3-101 lockout switch 3-100 SLMO8/SLMO24 3-115 cable and connector assignment 3-117 cable and connector assignment (for U.S only) 3-119 figure 3-115 LED statuses 3-116 SLU8 3-121 contact assignments 3-121 interfaces 3-121 SLU8R 3-123 contact assignments 3-123 interfaces 3-123 SMR 11-12 SNMP 11-27 software update 11-12 software upgrade 11-12 space requirements HiPath 3550/HiPath 3350 4-83 HiPath 3750 4-6 speech recording device optiLog 4me 9-37 splitting strips assignment 4-42 startup HiPath 3550, HiPath 3350, HiPath 3500,HiPath 3300 5-10 HiPath 3750 and HiPath 3700 5-2 station diagnosis 11-21 station status 11-21 STBG4 3-246 contact assignments 3-246 interfaces 3-246 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual hp3hp5shIX.fm STLS interfaces 3-124 STLS2 (not for U.S.) 3-124 STLS4 3-124 ISDN adapter wiring compared 3-127 STLS4R 3-131 contact assignments 3-132 interfaces 3-131 STMD8 3-133 cable and connector assignment 3-140 cable and connector assignment (for U.S only) 3-141 figure 3-133 ISDN adapter wiring compared 3-142 LED states 3-134 point-to-multipoint connection 3-136 point-to-point connection 3-136 S0 bus to terminals 3-138 S0 connection to NT 3-135 S0 networking 3-137 S0 trunk connection 3-135 STRB 3-247 connection values 3-248 contact assignments 3-250 interfaces 3-248 STRBR 3-247 contact assignments 3-251 interfaces 3-248 stripping the multi-conductor cable (open-end cable) 4-39, 4-66 subboards, inserting 4-69 surge protector 3-107 surge protector (HiPath 3700) for patch panel 4-62 surge protector (HiPath 3750) for MDFU/ MDFU-E 4-41 system configuration, changing (HiPath 3550/HiPath 3350/HiPath 3500/HiPath 3300) 5-13 system configuration, changing (HiPath 3750/HiPath 3700) 5-5 system software upgrade 11-9 system software, installing 4-69 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual T TAPI service provider 6-24 licensing 6-37 technical base station data 10-4 technical specifications 2-21 telephone test 11-24 telephones 9-1 interface to interface ranges 2-22 terminals ISDN data HiPath 3550 and HiPath 3350 3-126 HiPath 3750 3-142 terminating resistors (HiPath 3700) 4-59 terminating resistors (HiPath 3750) 4-35 tie trunk circuits, analog 3-143 TIEL 3-143 cable and connector assignment 3-154 cable and connector assignment (for U.S only) 3-156 data for the interface 3-145 DIP-FIX switch positions 3-147 figure 3-146 interface types 3-144 LED statuses 3-153 signal wire connection 3-148 signaling protocols 3-145 time-division multiplex channels for HiPath 3750 and HiPath 3700 4-74 TLA2 3-158 contact assignments 3-158 interfaces 3-158 TLA4 3-158 contact assignments 3-158 interfaces 3-158 TLA4R 3-160 contact assignments 3-160 interfaces 3-160 TLA8 3-158 contact assignments 3-159 interfaces 3-159 Z-13 hp3hp5shIX.fm TMAMF 3-162 cable and connector assignment DSP diagnosis, trace 3-163 figure 3-162 LED states 3-164 TMCAS 3-166 in HiPath 3550 3-171 in HiPath 3750 and HiPath 3700 switches, display 3-166 TMDID8 3-176 cable and connector assignment figure 3-176 switches 3-177 TMGL4 3-179 figure 3-179 interface assignments 3-180 TMGL4R 3-181 interface assignments 3-182 interfaces 3-181 TMGL8 3-183 cable and connector assignment figure 3-183 TML8W 3-185 cable and connector assignment figure 3-185 jumpers for CDR 3-185 LED statuses 3-186 TMOM 3-188 cable and connector assignment figure 3-189 LED states 3-192 PSE interfaces 3-191 PSE signals 3-190 switches 3-188 TMQ4 3-194 figure 3-194 interface assignments 3-195 Z-14 3-165 3-170 3-178 3-184 3-187 3-193 TMS2 3-199 jumper 3-200 LED states 3-201 NT connection 3-202 S2M networking 3-205 S2M trunk connection 3-202 SU connector assignments (backplane) 3-200 switches, displays 3-199 TMST1 3-196 figure 3-196 LED statuses 3-197 tools for installation (HiPath 3700) 4-2 for installation (HiPath 3750) 4-2 trace options 11-23 transfer of APS 11-9 trunk diagnostics 11-20 trunk failure transfer PFT1/PFT4 3-239 trunk ranges 2-22 trunk status 11-20 TS2 3-208 interface assignments 3-210 interfaces 3-209 NT cable set for Spain/Portugal 3-212 NT connection 3-211 S2M trunk connection 3-211 TS2R interface assignments 3-210 interfaces 3-209 NT connection 3-211 S2M trunk connection 3-211 TST1 3-206 interfaces 3-206 U uninterruptible power supply for HiPath 3750 and HiPath 3700 3-63 uninterruptible power supply for HiPath 5000 RSM 6-96 upgrade of the system software 11-9 upgrading HiPath 3000 8-25 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual hp3hp5shIX.fm UPSC-D 3-52 bridging times 3-53 connectors 3-56 figure 3-54 switches and indicators 3-55 UPSC-DR 3-57 battery pack for HiPath 3500/HiPath 3300 8-10 bridging times 3-58 connectors 3-62 figure 3-59 switches and indicators 3-61 UPSM 3-63 battery pack for HiPath 3700 8-10 bridging times 3-65 figure (-A100) 3-67 figure (-S100) 3-66 USB 1.1 interface 9-14 user groups and their access rights 11-62 USV P 500 6-96 W wall attachments HiPath 3750 4-12, 4-17 wall mounting (HiPath 3750) one cabinet 4-12 two stacked cabinets 4-17 wall-mount kit 4-12, 4-17 wiring ISDN S0 general information 9-69 point-to-multipoint long 9-72 point-to-multipoint short 9-71 point-to-point 9-70 workpoint clients 9-1 V V.24 contact assignments 3-253 V.24 adapter 3-254 V.24 cable, pin out 3-255 V.24 interface 3-252 V.24 interfaces (HiPath 3700) 4-57 V.24 interfaces (HiPath 3750) 4-33 V24/1 3-252 version hub 11-12 visual inspection HiPath 3700 4-79 HiPath 3750 4-79 voice compression 12-3 voice mail HOPE board 3-235 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual Z-15 hp3hp5shIX.fm Z-16 P31003-H3540-S403-3-7620, 06/03 HiPath 3000/HiPath 5000 V4.0, Service Manual www.hipath.com The information provided in this document contains merely general descriptions or characteristics of performance which in case of actual use not always apply as described or which may change as a result of further development of the products An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract The device conforms to the EU directive 1999/5/EG, as attested by the CE mark This device has been manufactured in accordance with our certified environmental management system (ISO 14001) This process ensures that energy consumption and the use of primary raw materials are kept to a minimum, thus reducing waste production *1PP31003-H3540-S403-3-7620* Siemens AG 2003 • Information and Communication Networks ã Hofmannstraòe 51 ã D-81359 Mỹnchen, Germany Reference No.: P31003-H3540-S403-3-7620 Printed in the Federal Republic of Germany Subject to availability Right of modification reserved ... 6 -41 6- 43 6- 43 6- 43 6 -44 6 - 46 6 - 46 6 - 46 6 - 47 6 - 47 6 - 47 6 - 47 6 - 47 6 - 48 6 - 49 6 -50 6 -51 6- 52 6- 54 6- 54 6 -55 6 - 57 6 - 57 6 - 57 6 - 59 6- 60 6- 60 6- 61 6- 62 6- 66 6 - 67 6- 68 6- 68 6- 69 6- 69 6- 69 0 -7 hp3hp5shTOC.fm... 9 -31 9- 32 9 - 34 9 - 37 9 - 38 9 - 39 9 - 39 9- 42 9 -44 9 - 45 9 - 46 9 - 48 9 - 48 9 - 49 9 - 49 9 -50 9- 53 9- 53 9- 54 9 - 56 9 - 56 9 - 57 9 - 58 9 - 59 9 -61 9- 63 9- 63 9- 64 9- 65 9 -66 9 -66 9 - 67 9 - 68 9 - 69 9 -70 10 HiPath Cordless... 3- 1 76 3- 1 79 3- 181 3- 1 83 3-1 85 3- 1 89 3- 191 3- 1 94 3- 1 96 3- 1 98 3- 199 3 -20 2 3 -20 3 3 -20 3 3 -20 4 3 -20 5 3 -20 6 3 -20 9 3 -20 9 3 -21 1 3 -21 2 3 -21 3 3 -21 5 3 -21 7 3 -21 9 3 -22 0 3 -22 2 3 -22 3 3 -22 6 3 -22 7 3 -22 9 0- 17 hp3hp5shLOF.fm