AISG 4 Cores Cable Specification V2 0 华为技术有限公司 Huawei Technologies Co , Ltd 版权所有 侵权必究 All rights reserved AISG Cable Specification PVC Outdoor AISG Cable Specification V2 0 Security Le[.]
AISG Cable Specification 华为技术有限公司 Huawei Technologies Co., Ltd 版权所有 侵权必究 All rights reserved PVC Outdoor AISG Cable Specification V2.0 Reference Standard / Rated Voltage 300V Working Temperature Range -40℃~75℃ Min Installation Temperature 0℃ Storage Temperature Range -40℃~50℃ Applications PVC Outdoor AISG Cable Security Level: Cross Section Configurations 2.1 Conductor 2.1.1 Conductor A Material: Annealed Bare Copper AWG Size: 24AWG Conductor Diameter (with tolerance): 19/0.127mm±0.004mm 2.1.2 Conductor B Material: Annealed Bare Copper AWG Size: 18AWG Conductor Diameter (with tolerance): 42/0.15mm±0.004mm 2.2Insulation 2.2.1 Insulation A Material: PP Normal Thickness: 0.38mm Min Thickness: 0.32mm Concentric Ratio: ≥85% Insulation Diameter (with tolerance): 1.40mm±0.05mm Insulation Color: White (Pantone Warm Gray 1C), Blue (Pantone 3005U) 2.2.2Insulation B Material: PP Normal Thickness: 0.32mm Min Thickness: 0.29mm Concentric Ratio: ≥85% Insulation Diameter (with tolerance): 1.80mm±0.05mm Insulation Color: Red (Pantone 1797C), Orange (Pantone 164C) 2.3 Twisted Form Pair-twisted Twist cores: Insulation A 2.4 Twisted Lay Range Not more than 35mm 2.5 Cabling Pairs Number: Pairs + 2C Cabling Lay Length: not more than 100mm 2014-12-24 HUAWEI Confidential Page2, Total4 PVC Outdoor AISG Cable Specification V2.0 Security Level: 2.6 Wrapping Shield Material: Single side Al Foil which electric side toward outside Thickness of Al Foil: not less than 0.06mm Thickness of Al: not less than 0.03mm Overlapping: ≥25% 2.7 Wire Shield Shield Form: Braid Material: Annealed Tinned Copper Single Wire Diameter (with tolerance): 0.12mm±0.003mm Coverage: ≥75% 2.8 Outer Jacket Material: PVC Oxygen Index: OI≥30 Hardness: 78±3 Shore A Jacket Diameter (with tolerance):7.4±0.2mm Normal Thickness: 1.0mm Min Thickness: 0.85mm Concentric Ratio: ≥80% Outer Jacket Color: Black (Pantone Black 3C) The color not mentioned should meet IEC60304 Chromatic aberration (|△E|): ≤4.0 Marking 3.1 The Surface markings should include following contents: a) Certification Information (e.g CE or UL E number) b) Manufacture Name c) Cable type and spec d) Rated Temperature Information e) Flammability Information f) Month/Day/Year (e.g 02-20-2010) g) Length: XXXX m h) Other necessary contents (Optional) 3.2 The surface markings words of the cable which should accord with the corresponding regulation of the standard GB6995.1 (eqv IEC 60304) should be clear and natty, have no overprint and lack of printing The marking words which color should not be transferred should be affixed with the cable jacket tightly 3.3 The surface markings words should be so clear to identify when they are wiped 10 times gently by water-immersed absorbent cotton or cotton Mechanical and Physical Characteristics 4.1 Conductor Tensile Strength: not less than 200MPa Elongation: not less than 15% 4.2 Insulation 4.2.1 Before Aging Tensile Strength: not less than 10MPa Elongation: not less than 300% 4.2.2 After Aging Aging Condition: 100℃±2℃, 168h Tensile Strength: not less than 10MPa Elongation: not less than 300% 4.3 Insulation Hot Shrink Conditions: 100℃±2℃, 1h Shrink Value: ≤5% 4.4 Insulation Low Temperature Bend Conditions: -40℃±2℃, 1h 2014-12-24 HUAWEI Confidential Page3, Total4 PVC Outdoor AISG Cable Specification V2.0 Security Level: Result: no crack 4.5 Outer Jacket 4.5.1 Before Aging Tensile Strength: not less than 12.5MPa Elongation: not less than 125% 4.5.2 After Aging Aging Condition: 100℃±2℃, 168h Tensile Strength Variation: not more than 20% Elongation Variation: not more than 20% 4.5.3 After Aging (Sunlight aging, 300h) Tensile Strength Variation: not more than 15% Elongation Variation: not more than 15% 4.5.4 After Aging (Sunlight aging, 720h) Tensile Strength Variation: not more than 20% Elongation Variation: not more than 20% 4.6 Cold Bend Test Conditions: -40℃±2℃, 5h Overall Diameter: not more than 12.5mm Result: no crack 4.7 Cold Elongation Test Conditions: -35℃±2℃ Overall Diameter: more than 12.5mm Elongation: ≥20% 4.8 High Temperature Bend Test Conditions: 130℃±2℃, 1h and 70℃±2℃, 5h Result: no crack 4.9 Double 85 Test Conditions: 85℃±2℃, 85%±5%, 1000h Result: No crack 4.10 Flammability VW-1 Electrical Characteristics 5.1 Conductor DC Resistance Conductor A:≤80 Ω/Km Conductor B: ≤26 Ω/Km 5.2 Insulation Resistance Between wires: ≥5000 MΩ.km 5.3 Dielectric Strength DC 1500V 1min 5.4 Characteristic Impedance 1MHz~100MHz: 100Ω±20Ω Environment Requirements Meet the standard of RoHS and REACH Safety Certify (Notes: Safety certification which the cable need to passed.) UL Certification Edition Record Date Author Version 2012-08-06 Guo Pengtao 1.0 2014-09-10 Liangzhenxing/00174265 2.0 2014-12-24 Revision declaration - HUAWEI Confidential Page4, Total4 ... 4. 3 Insulation Hot Shrink Conditions: 100℃±2℃, 1h Shrink Value: ≤5% 4. 4 Insulation Low Temperature Bend Conditions: -40 ℃±2℃, 1h 20 14- 12- 24 HUAWEI Confidential Page3, Total4 PVC Outdoor AISG Cable. ..PVC Outdoor AISG Cable Specification V2.0 Reference Standard / Rated Voltage 300V Working Temperature Range -40 ℃~75℃ Min Installation Temperature 0℃ Storage Temperature Range -40 ℃~50℃ Applications... Author Version 2012-08-06 Guo Pengtao 1.0 20 14- 09-10 Liangzhenxing/001 742 65 2.0 20 14- 12- 24 Revision declaration - HUAWEI Confidential Page4, Total4