Towards high energy and high power density lithium rich cathode materials for future lithium ion batteries exploring and understanding mechanisms and role of transformation

... TOWARDS HIGH- ENERGY AND HIGH- POWER DENSITY LITHIUM- RICH CATHODE MATERIALS FOR FUTURE LITHIUM- ION BATTERIES: EXPLORING AND UNDERSTANDING MECHANISMS AND ROLE OF TRANSFORMATION SONG BOHANG ... density cathode materials for next-generation lithium ion batteries (LIB) is important and urgent because of high demand of long lasting power sources, such as portable devices, power tools and ... industrial applications Among advanced energy storage conceptions, lithium- ion batteries (LIBs) are remarkable systems due to their high energy density, high power density, and low gaseous exhaust...

LI4TI5O12 based anode materials for high power lithium ion batteries

... LI4TI5O12- BASED ANODE MATERIALS FOR HIGHPOWER LITHIUM- ION BATTERIES LIN CHUNFU (M Eng and B Eng., Tsinghua University) A THESIS SUBMITTED FOR THE DEGREE OF DOCTOR OF ... corresponding anode materials are still limited [1] Among various anode materials, LTO is believed to be a promising anode material for highpower LIBs 1.3 Overview of anode materials An ideal anode material ... indicators for high- power applications Power density is defined as operation current density times operation voltage For an anode material, low working potential implies high operation voltage...

High performance nanostructured phospho olivine cathodes for lithium ion batteries

... in the performance improvement of phospho- olivine cathodes It aims to combine composition and structural modifications rationally to fabricate phospho- olivine cathodes with high energy, high rate ... (nanocrystallite aggregation, encapsulation of phosphoolivine in a porous carbon network) were used complementarily to increase the electrochemical performance of phospho- olivines in high rate and extended ... 40 ° for h; (b) addition of H3PO4 to C 2+ 3+ the (Mn , Fe ) solution under sonication, followed by more h of sonication; (c) addition of H3PO4 to the (Mn2+, Fe3+) solution under sonication for...

Báo cáo hóa học: " Synthesis and characterization of integrated layered nanocomposites for lithium ion batteries" ppt

... doi:10.1186/1556-276X-7-60 Cite this article as: Gim et al.: Synthesis and characterization of integrated layered nanocomposites for lithium ion batteries Nanoscale Research Letters 2012 7:60 ... range of stoichiometric compositions Therefore, the present work reports on the synthesis and systematic investigations on the structure, morphology, and electrochemical performances of an integrated ... results and wrote the paper JS, HP, JWK, and KK participated in the characterization of samples and carried out experiments VM contributed to the technical discussions All the authors have read and...

báo cáo hóa học:" Synthesis and characterization of integrated layered nanocomposites for lithium ion batteries" pdf

Studies on metal oxides and cobalt nitride as prospective anodes for lithium ion batteries

... presents studies on mixed metal oxides and cobalt nitride as prospective anode materials for LIBs based on the Li- recyclability by electrochemical processes such as ‘conversion’ reaction involving ... VI.4.Conclusions 251 References 253 Conclusions and Suggestions for Future Work 256 x Summary Lithium ion batteries (LIBs) are the promising dc- energy source for portable electronic devices such as ... nano-size metals or formation/ decomposition of Limetal alloy Chapter I describes the LIBs, principle of operation, development of LIBs, applications, world market and need for R&D and selection criterion...

Carbon and tin based nanostructured anode materials for lithium ion batteries

... Thesis Spine CARBON AND TIN BASED NANOSTRUCTURED ANODE MATERIALS FOR LITHIUM ION BATTERIES DENG DA 2009 CARBON AND TIN BASED NANOSTRUCTURED ANODE MATERIALS FOR LITHIUM ION BATTERIES DENG DA ... Lithium Ion Batteries 2.1.2 Developments of Lithium Ion Batteries .11 2.2 Nanostructured Anode Materials 14 2.2.1 Carbonaceous Materials 14 2.2.2 Sn -Based Nanostructured Materials ... PUBLICATIONS .152 V SUMMARY This thesis study is focused on the synthesis of new carbon- and tin- based nanostructured materials for the anode of lithium ion batteries A number of 1D, 3D and...

Báo cáo toán học: " Electrochemical performance of NixCo1-xMoO4 (0 [less than or equal to] x [less than or equal to] 1) nanowire anodes for lithium-ion batteries" pptx

... Electrochemical performance of NixCo1−xMoO4 (0 ≤ x ≤ 1) nanowire anodes for lithium-ion batteries Kyung-Soo Park1, Seung-Deok Seo1, Hyun-Woo Shim1, and Dong-Wan Kim*1 Department of Materials ... fabrication of NixCo1−xMoO4 (0 ≤ x ≤ 1) nanowire electrodes by a hydrothermal method, followed by thermal post-annealing We also demonstrate the superior electrochemical performance of NixCo1−xMoO4 nanowires ... images of NixCo1−xMoO4 (0 ≤ x ≤ 1) nanowires obtained by post-annealing the NixCo1−xMoO4·nH2O nanowire precursors at 500°C for h All postannealed samples maintained their pristine nanowire morphologies...

Lithium-ion Batteries Part 1 pdf

... Battery 10 50/45 30 High Energy /Power Ratio Battery 40 46/38 25 kWh 3.4 11 .6 kWh 0.5 0.3 Cycles Cycles year kg Liter kW 5,000 300,000 15 60 40 1. 4 (12 0V /15 A) 5,000 300,000 15 12 0 80 1. 4 (12 0V /15 A) ... available power per unit time which is given by the following equation (1) Power density = Q × ΔV (1) Next generation lithium ion batteries for electrical vehicles Here, Q is charge density (A/kg) ... railcar by lithium ion battery Takashi Ogihara 12 1 VIII Towards high performance anodes with fast charge/discharge rate for LIB based electrical vehicles 1 X Towards high performance anodes with fast...

Lithium-ion Batteries Part 5 doc

... No.1, 1(April 2009) 855 - 858 Venugopal, G (2001) Characterization of thermal cut-off mechanisms in prismatic lithiumion batteries, Journal of Power Sources, Vol 101, No 2, 15 (October 2001) 231-237 ... lithium-ion batteries Journal of Power Sources, Vol 119-121, (June 2003) 326-329 Cho, J (2003) Improved thermal stability of LiCoO2 by nanoparticle AlPO4 coating with respect to spinel Li1.05Mn1.95O4, ... Buhrmester, C & Dahn J R (20 05) Chemical Overcharge and Overdischarge Protection for Lithium ion Batteries, Electrochem Solid state letters, Vol 8, issue (20 05) A 59 -A 62 Dahn, J R (2001) Lithium...

Lithium-ion Batteries Part 8 pdf

... Ni2+/Ni3+ -8. 00E-04 10th, 5th, nd, 1st Cycle -1.20E-03 0.00E+00 Ni3+/Ni2+ Mo5+/Mo4+ -3.00E-04 2 .8 -1.60E-03 1.5 2.5 3.5 Voltage / V vs Li/Li+ 3.3 3 .8 4.3 4.5 4 .8 104 Next generation lithium ion batteries ... program (FullProof Suite, WINPLOTR 2004) and calculated to be: a = 14. 280 (9) Å, b = 3. 382 (8) Å, c = 10.5571 Å and β = 117.97 28 Intensity (Counts) (200) (012) 1000 (202) (112) (220) 700C (212) ... three-dimensional framework (Nadiri et al., 1 984 ; Reiff et al., 1 986 ; Torardi & Prince, 1 986 ) and hence are considered as electrode materials for rechargeable lithium batteries (Padhi et al., 1997) The...

Lithium-ion Batteries Part 9 potx

... rechargeable lithium batteries Journal of the Electrochemical Society, vol 147, no 3, pp 96 0 -96 9 Long GJ.; Longworth G.; Battle P.; Cheetham AK.; Thundathil RV & Beveridge D ( 197 9) A study of anhydrous ... ( 199 5) The LiNiO2 solid solution as a cathode material for rechargeable lithium batteries Journal of Power Sources, vol 54, pp 3 29- 333 Nadiri, A.; Delmas, C.; Salmon, R & Hagenmullar, P ( 198 4) ... Li-ion batteries- Structure, microstructure and properties Proceedings of 11th International meeting on lithium batteries, 212, Monterey, CA Okada, S ( 199 6) International Symposium on lithium batteries, ...

Next generation lithium ion batteries for electrical vehicles potx

... after reaching of the 10 Next generation lithium ion batteries for electrical vehicles ions to the anode surface, the effective participation of the ions to the redox reaction is governed by the ... as an anode material for lithium ion batteries Scripta Materialia, Vol 58, No 5, 2008, pp 405-408, ISSN 1359-6462 32 Next generation lithium ion batteries for electrical vehicles Wang, L.; Yu, ... and Its Application to Lithium- Ion Batteries Chemistry of Materials, Vol 21, No 13, May 2009, pp 2935-2940, ISSN 0897-4756 34 Next generation lithium ion batteries for electrical vehicles Thermo-chemical...

Mathematical modeling of transport phenomena in lithium ion batteries

... taken into account 1.2 MATHEMATICAL MODELING OF LITHIUM- ION BATTERIES 1.2 Mathematical modeling of lithium- ion batteries Mathematical modeling and computational analysis are extensively employed in ... transition metal employed for the positive electrode (1.3) 1.1 OVERVIEW OF LITHIUM- ION BATTERIES Figure 1.2: Schematic of a lithium- ion battery operation principle 1.1 OVERVIEW OF LITHIUM- ION BATTERIES ... OVERVIEW OF LITHIUM- ION BATTERIES 1.1.1 Structure and operation principles of a lithium- ion battery cell A basic lithium- ion battery cell consists of several functional layers: a current collector of...

183
1,652
0

Xem thêm