uop ethermax process for mtbe etbe and tame production
Benchmarking Biomass Gasification Technologies for Fuels, Chemicals and Hydrogen Production pot
... have been for the generation of process heat, steam and electricity R&D outlined below, geared to producing syngas for fuels, chemicals and hydrogen production, would be beneficial for filling ... value for the syngas Biomass integrated gasification combined cycle (BIGCC) technology has been considered for electricity production in the sugarcane and pulp and paper industries, and for general ... gas to fuel a steam boiler for electricity production and district heating Ash is produced and converted to slag Future Plans: Existing Process Data: Process type: Process size (pilot, commercial…)...
- 65
- 784
- 2
Analysis and practical implementation of a model for combined growth and metabolite production of lactic acid bacteria
... polysaccharides and bacteriocins Analogous to other industrial processes, the use of mathematical models in the food industry is gaining more and more attention for process evaluation, optimisation and design ... reaches maximum values for the specific rates, the metabolites accumulate slowly and their influence on growth and production kinetics is small Therefore, since the medium and associated initial ... acid and pH measurements) is necessary Obviously, use is made of relations (14) and (15) and the determined values for a, b, c, a1, b1, c1 and pH0 to determine the input values [LaH](t) and [H...
- 12
- 625
- 0
Báo cáo nghiên cứu nông nghiệp " Biofertiliser inoculant technology for the growth of rice in Vietnam: Developing technical infrastructure for quality assurance and village production for farmers " pot
... biofertiliser production and quality assurance 4 Training by technologists instructing village women and others in biofertiliser production, sampling for simple tests of quality and methods for field ... Performance 3.1 Project Components and Outputs Component No Component Description Outputs Performance Indicators Performan ce Rating tests for Develop test methods PCR of and train methods for ... objectives and scope at design The main objectives and inputs are: To establish simple microbiological and immunodiagnostic tests for providing quality assurance of biofertiliser mother cultures and for...
- 12
- 498
- 0
IMPROVEMENT OF BIOLOGICAL SOLUBILIZATION AND MINERALIZATION PROCESS FOR FOOD WASTE
... (Sankai et al., 1997; Gallil and Yaacov, 2001) Biological solubilization and mineralization process was proposed for food wastes (Okada and Nishijima, 2001) In the process, food wastes are mixed ... mineralization process without accumulation of food wastes and to increase mineralization rate for the reduction of organic loading to the sewerage system MATERIALS AND METHODS Reactor Specification and ... food waste was 82 % and contains 42 % carbon and % nitrogen per dry weight basis The waste was chopped to 1-cm cube size and stored in a refrigerator at ºC before use Sampling and Analyses Solid...
- 8
- 424
- 0
Tài liệu Process Improvement For Effective Budgeting And Financial Reporting (Wiley-2003) doc
... dysfunctional and low-value added processes for budgeting, forecasting, and financial reporting And, as financial executives come and go, typically little is done to streamline these processes Even ... consultants, and other resources ABOUT BUSINESS PROCESS IMPROVEMENT Budgeting Reporting Processes: Budgeting and Reporting Subprocesses: For example, Budgeting subprocesses Activities: For example, ... for input, reports, and the process for data collection and distribution • Poor integration of strategies and planning process The problem with most planning and budgeting processes is that they...
- 300
- 988
- 2
Tài liệu EFFECTIVE POLICIES FOR SMALL BUSINESS: A GUIDE FOR THE POLICY REVIEW PROCESS AND STRATEGIC PLANS FOR MICRO, SMALL AND MEDIUM ENTERPRISE DEVELOPMENT pptx
... POLICIES FOR SMALL BUSINESS A GUIDE FOR THE POLICY REVIEW PROCESS AND STRATEGIC PLANS FOR MICRO, SMALL AND MEDIUM ENTERPRISE DEVELOPMENT About the OECD The Organisation for Economic Co-operation and ... so for informal and micro enterprises Information and communication technology is now beginning to change this For a selection of websites on SMEs and their development see also Annex 9.3 Information ... enhancement for social advance, UNIDO performs the following core functions: • As a global forum, UNIDO generates and disseminates knowledge relating to industrial matters and provides a platform for...
- 110
- 481
- 2
The bioliq® bioslurry gasification process for the production of biosynfuels, organic chemicals, and energy pdf
... fuels and for the still remaining fraction of car, truck, and bus fuels In the course of the century, the biomass demand for these conventional and new synthetic transportation fuels, tailored for ... particle filter, a fixed bed sorption for sour gas and alkaline removal, and a catalytic reactor for the decomposition of organic (if formed) and sulfur- and nitrogen-containing compounds [42] ... explain the conceptual design and process fundamentals in essential details and the research and development status for the KIT bioliq process in sequence of the successive process steps Finally, a...
- 44
- 1,510
- 0
david reay, colin ramshaw, adam harvey - process intensification~ engineering for efficiency, sustainability and flexibility
... and consumer products show the depth and breadth of opportunities for the innovative application of PI to advance technology and to create wealth ix FOR- H8941.indd ix 6/30/2008 5:19:24 PM x FOREWORD ... organisations and individuals for providing data, including Case Studies, for use in this book They include: David Trent, recently retired from Dow Chemical, Texas, for the Foreword and data included ... 1.4 THE CHEMICAL PROCESS INDUSTRY – THE PROCESS INTENSIFICATION BREAKTHROUGH AT ICI The use of rotation for separations and reactions has been the subject of debate for many years and, particularly...
- 453
- 683
- 0
business process implementation for it professionals and managers
... requirements and specifications in a standard form One of the major reasons for modeling an asset is to establish a standard structure or form for the asset Because each asset class has a known form, ... Information Systems and Business Dynamics, Network System Architecture, and Information Networks: A Design and Implementation Methodology He also has authored and presented numerous talks and ... methodologies, striving for and encapsulating best practices This Bob has reflected on the reasons, both technical and organizational, for successes and failures of process modeling and implementation...
- 322
- 396
- 0
Process Engineering for Pollution Control and Waste Minimization_1 pdf
... rendered Love’s plans for the canal uneconomic, and Love’s dream for the canal was never realized The abandoned canal filled with rainwater and was used as a swimming hole and for winter ice skating ... regulatory reform effort, denominated “Project XL,” allowed companies and other entities to propose projects that substitute performance based standards for the prescriptive, one-size-fits-all, standards ... International Standards Organization (ISO) was established in Geneva, Switzerland, in 1947 The purpose of the ISO was (and is) to develop uniform, worldwide standards for the conduct of manufacturing and...
- 26
- 501
- 0
Process Engineering for Pollution Control and Waste Minimization_2 pot
... between data, processes, and applications: A datum may be used by multiple processes; e.g., Building Address is used for SARA Title III reporting and for OSHA accident reporting A process may be ... real risk reduction and performance improvement when information maintenance and management is required For more active decision-making processes, the described framework for environmental decision ... great deal of information regarding alternative materials, components, and processes available for consideration by the designer Such information is notoriously difficult to find, and when available...
- 26
- 379
- 0
Process Engineering for Pollution Control and Waste Minimization_3 ppt
... from landfilling of waste, during the whole life cycle of the landfill In principle, each landfill shall be classified in one of the following classes: Landfill for hazardous waste Landfill for ... biomass, and water 2.2 Council Directive on Landfill of Waste The aim of the Directive on landfill of waste is, by way of stringent operational and technical requirements on the waste and landfills, ... in a landfill The landfill permit shall state at least the class of the landfill and the list of defined types and the total quantity of waste which are authorized to be deposited in the landfill...
- 26
- 322
- 0
Process Engineering for Pollution Control and Waste Minimization_4 docx
... is as fuel for process heat, and over one-fifth (gross) is in the form of electricity for furnaces, electrolytic processes, and electric motors Most process heat is delivered in the form of steam, ... agricultural lands, forests, and areas of historical and geological value, and resulted in the dislocation of communities and loss of wildlife (6) Dam failure can cause catastrophic floods and thousands ... solar heating and cooling function with few or no mechanical devices; primarily they involve designing the form of landscape and building in relation to each other and to sun, earth, and air movement...
- 26
- 479
- 0
Process Engineering for Pollution Control and Waste Minimization_5 potx
... capillary pressure as the driving force for condensing and evaporating the working fluid, thus eliminating the necessity for pump and compressor in the power cycle The understanding of heat pipe operation ... in process applications The information has been grouped in terms of flow conditions and thermophysical properties involved Flow conditions are described through the Reynolds number (Re) for forced ... heat transfer coefficients for heating–cooling operations, and change-of-phase heat transfer Co-generation in chemical and petrochemical processes makes use of the process integration gained...
- 26
- 472
- 0
Process Engineering for Pollution Control and Waste Minimization_6 ppt
... implemented for minimizing waste in the dairy, milk, and food processing industries (107) They are similar to TFs in design, operation, and use HLR, OLR, and are still the key design and operating ... bacteria and their associated pathways have also been studied for PHA production [170] Since the bacterial source and pathway used for generating the PHA is known, it is easy to identify and employ ... contaminant for heterotrophic microorganisms There are three categories of nutrients based on the quantity and essential need for them by the microorganism: macro, micro, and trace nutrients (89,90) For...
- 26
- 350
- 0
Process Engineering for Pollution Control and Waste Minimization_7 pdf
... Waste in Livestock and Poultry Production Kagaku, vol 36, no 11, pp 720–726, 1998 35 B Kherrati, M Faid, M Elyachioui, and A Wahmane, Process for Recycling Slaughterhouse Wastes and Byproducts of ... Schulz, T Blunk, and A Gopfercih, Carrier for Drug Formulations and Artificial Living Tissues Pharm Z., vol 144, no 45, pp 3661–3668, 1999 159 P Biely and L Kremnicky, Yeasts and Their Enzyme ... Kouno, H P Lukito, and T Ando, Minimum Available N Requirement for Microbial Biomass Formation in a Regosol Soil Biol Biochem., vol 31, no 6, pp 797–802, 1999 C Chien, E Leadbetter, and W Godchaux,...
- 26
- 455
- 0
Process Engineering for Pollution Control and Waste Minimization_8 pot
... zero and develop process flow diagrams for each waste type A process flow diagram is an overview of the process that generates the waste Process flow diagrams provide a summary of the processes and ... porous, and 0.45 µm in average pore diameter was used as a support for the liquid membrane Low-pressure reverse osmosis (RO) was used by Ujang and Anderson (14) for separation of mono- and divalent ... sampling, with reservoirs for the reagent, waste, and calibration/standard solution, along with the micromump and necessary fluidic network on a cable platform (Figure 2) The sample and reagent are thus...
- 26
- 401
- 0
Process Engineering for Pollution Control and Waste Minimization_9 potx
... Stream Inflows Process Process Process A1 Segregate Path B Waste Stream Process B2 Process B1 Path B FIGURE Conceptual technology process map particular process, and safety of the processes A matrix ... Health and safety advantages and disadvantages for implementing the proposed option Select the best option for each solvent waste stream and implement Track performance of the implemented option and ... facilities where outstanding performance levels were reached prior to 1992, the percentage-reduction targets for Goals 1(b) and (c) and 2(a) and (b) may not be fully achievable, or the effort to achieve...
- 26
- 399
- 0
Process Engineering for Pollution Control and Waste Minimization_10 pot
... main parameters for industrial production and waste generation It is based on the following main production process variables: Raw materials (rm) Other materials entering production process (v) Produced ... of raw and other materials entering industrial production in time t Production factor after time t; U = represents total production, while U = represents zero level of production and therefore ... thermal, and/ or biological process as to recover secondary materials and/ or energy, while R = represents total waste processing by physical, chemical, thermal, and/ or biological process for final...
- 26
- 397
- 0
Process Engineering for Pollution Control and Waste Minimization_11 pptx
... study, and also to reflect the focus of the LCA being performed Equations may be written from this basic form for any process wherein boundaries can be determined, in either differential form or ... balances and individual component balances for overall matrix solutions Energy balances are handled in a similar fashion, incorporating thermodynamic properties and allowing for both open and closed ... basic studies and applications, and there are many articles and texts available between basics and detailed methods The objective of this chapter is to explore the application of LCA for waste site...
- 26
- 352
- 0
- the liga process a fabrication process for high aspect ratio microstructures in polymers metals and ceramics
- banks should have a process for assessing their overall capital adequacyin relation to their risk profile and a strategy for maintaining their capital levels
- uop alkylene™ process for motor fuel alkylation
- uop oleflex process for light olefin production
- isocracking hydrocracking for superior fuels and lubes production
- uop unicracking process for hydrocracking
- uop unisar process for saturation of aromatics
- uop molex process for production of normal paraffins
- uop olex process for olefin recovery
- putting it all together a process for evaluating and addressing the impacts
- abstract from the qcf process for developing and approving units
- application of hybrid process of coagulation flocculation and membrane filtration for the remova
- symbior® process for simultaneous nitrification and denitrification
- evidence based practice a philosophy and process for thinking ethically and critically about decisions
- a four level process for handling layoffs and their effects
Tìm thêm: xác định các mục tiêu của chương trình khảo sát chương trình đào tạo của các đơn vị đào tạo tại nhật bản tiến hành xây dựng chương trình đào tạo dành cho đối tượng không chuyên ngữ tại việt nam điều tra với đối tượng sinh viên học tiếng nhật không chuyên ngữ1 khảo sát thực tế giảng dạy tiếng nhật không chuyên ngữ tại việt nam nội dung cụ thể cho từng kĩ năng ở từng cấp độ xác định mức độ đáp ứng về văn hoá và chuyên môn trong ct phát huy những thành tựu công nghệ mới nhất được áp dụng vào công tác dạy và học ngoại ngữ mở máy động cơ lồng sóc mở máy động cơ rôto dây quấn các đặc tính của động cơ điện không đồng bộ hệ số công suất cosp fi p2 đặc tuyến hiệu suất h fi p2 đặc tuyến mômen quay m fi p2 đặc tuyến tốc độ rôto n fi p2 đặc tuyến dòng điện stato i1 fi p2 động cơ điện không đồng bộ một pha sự cần thiết phải đầu tư xây dựng nhà máy phần 3 giới thiệu nguyên liệu từ bảng 3 1 ta thấy ngoài hai thành phần chủ yếu và chiếm tỷ lệ cao nhất là tinh bột và cacbonhydrat trong hạt gạo tẻ còn chứa đường cellulose hemicellulose