... Level 1 2D TOOLPATH CREATION
CONTOUR CHAMFER 10 0
REVIEWING EXERCISE DRAWING # 4.MCX 10 2
SPOT DRILLING THE 9/ 16 12 TAP HOLES 10 7
DRILLING THE 9/ 16 12 TAP THROUGH HOLES 10 8
TAPPING THE 9/ 16 12 TAP ... 12 TAP HOLES 10 8
ADD A SPOT DRILLING OPERATION BEFORE THE DRILLING OPERATION 109
USE TABS IN CONTOUR 11 0
MACHINING A POCKET WITH ISLANDS OF DIFFERENT HEIGHTS 11 4
DRAWING # 18 .MCX 11 6
REMACHINING ... MATERIAL 11 7
REMACHINING THE POCKET TO REMOVE MORE MATERIAL 11 8
REMACHINING THE POCKET TO DO A FINAL CLEANUP 1 19
ENGRAVING IN HOUSE SOLUTIONS AND MASTERCAM USING A CONTOUR TOOLPATH 12 0
CIRCMILL.MCX 12 1
SOLID...
... 1
Flow 5 Axis Tutorial 8 1
Multisurface 5 Axis Tutorial 91
Port 5 Axis Tutorial 10 1
General Notes B 1
4/5 Axis TUTORIAL 4
STEP 6: FACE THE FLAT SURFACE AT 16 5 DEGREES ANGLE.
6 .1 About Tool Planes
The ... Tutorial 3 1
Chuck Indexing Tutorial 4 1
Rotary4 Axis Toolpath And Axial 4ax Tutorial 5 1
Curve 5 Axis And Drill 5 Axis Tutorial 6 1
Swarf 5 Axis With Wall Defined By Using 2 Contours Tutorial 7 1
Flow ... are relative to the new tool origin.
Select the OK button to exit.
STEP 10 : MACHINE THE GROOVE AT THE 12 0 DEGREES ANGLE.
10 .1 Set both Cplane and Tplane.
Select Planes in the Status Bar.
Select...
... Page 7 -14
to
Mill Level 1 TUTORIAL 7
STEP 11 : IMPORT THE OPERATIONS FOR THE 9/ 16 TAP HOLES FROM THE
LIBRARY
Toolpath Preview:
11 .1 Import the operations
Right-mouse ... 8 -1
Tutorial #9, 2D & Solids Geometry, 2D HS Toolpaths, Import a SolidWorks file 9- 1
Tutorial #10 , Import a SolidWorks file, Orient the part, Dynamic plane & FBM 10 -1
General Notes B 1
Default ... Started A1
Graphic User Interface A -1
Navigate Through the System A-2
Setting the Toolbar States A-4
Setting the Grid A-6
TUTORIALS 11
Tutorial #1, 2D Geometry, Open Contour and Drilling 1- 1
Tutorial...
... Distance 25 + 10 0 (Enter).
Select Entity A
Page 7 13
Mill Level 1 Metric TUTORIAL 7
STEP 11 : IMPORT THE OPERATIONS FOR THE M14 X 2 TAP HOLES FROM THE
LIBRARY
Toolpath Preview:
11 .1 Import the ... button.
Page 7 16
Page 7 14
Mill Level 1 Metric Training Tutorials
To order more books:
Call 1 800 5 29 5 517 or
Visit www.inhousesolutions.com or
Contact your Mastercam Dealer
Mill Level 1 Metric
5.2 ... D
d
^
^
D
>
/
d
>
/ ,
Page 7 9
Mill Level 1 Metric
TOOLPATH CREATION
SUGGESTED FIXTURE FOR SETUP 1:
SETUP SHEET FOR SETUP 1:
Page 7 24
Z Y
X
TUTORIAL 7
Mill Level 1 Metric
Select the Apply button...
... Facing.
Page 1 32
TABLE OF CONTENTS
Getting Started
Tombstone Project Using WCS
Tombstone With Multiple Fixtures On Each Face
Chuck Indexing Project
Mastercam Notes
A1
11
21
31
B1
X³ TOMBSTONE ... as
File Name: “Tombstone”
Page 1 18
TOMBSTONE PROJECT
X³ TOMBSTONE PROJECT
STEP 11 :
POCKET THE RIGHT SIDE PLANE REMOVING THE MATERIAL AROUND THE
OBROUND SHAPE.
11 .1 Change both Cplane and Tplane ... dialog box.
Page 1 11
TOMBSTONE PROJECT
Indexing (Tombstone & Chuck) Training Tutorials X³
To order more books:
Call 1- 800-5 29- 5 517 or
Visit www.inhousesolutions.com or
Contact your Mastercam Dealer
...
... (WCS)
Lesson #18 2D High Speed Toolpaths (continued)
Lesson # 19 fbm mill & drill Toolpaths
Lesson #20 Toolpaths - Test
3
15
28
34
40
47
56
61
69
71
73
91
97
10 0
10 7
11 1
12 1
12 6
13 3
14 0
Lesson ... task
Bold text (usually) represents Mastercam terminology
To order Mastercam X³ Mill Level 1 Training Tutorials books:
Contact your Mastercam Dealer,
Call 1- 800-5 29- 5 517 or
Place an order through www.inhousesolutions.com
P
a
g
e ... minHave Students follow Tutorial 1 from
the book to create
2D Geometry. Page 1- 2 to Page 1- 9Mastercam &
Mill Level 1 Training Tutorial BookEnhancing Phase1 hourUse the following Training...
... CONTENTS
Getting Started A 1
Graphic User Interface A
Navigate Through Mastercam A
Setting the Toolbar States A
Setting the Grid A
1
2
4
5
Tutorials 1 1
Tutorial #1, 2D Geometry and Contouring 1 1
Tutorial #2, ... 6 1
Tutorial #7, Creating and Using a Profile Bit For Moldings 7 1
Tutorial #8, Nesting 8 1
Tutorial #9, Creating and Using a Profile Bit for Table Top, Metric Exercise 91
General Notes B1
Default ... books:
Call 1- 800-5 29- 5 517 or
Visit www.inhousesolutions.com or
Contact your Mastercam Dealer
ROUTER X4
TUTORIAL 2
Right mouse click below the pocket, and select Paste.
We are going to use a 1/ 8“ Straight...
... 4 -11
TUTORIAL 4
4/5-Axis TUTORIAL 4
GEOMETRY CREATION
STEP 1: CREATE THE 2D GEOMETRY IN THE RIGHT SIDE VIEW
Option 1
The geometry file, Tutorial4_geometry.zip, can be downloaded from
www.emastercam.com/files
The ... Rotate
Select the line; Enable Copy and set # to 1; Rotation angle 90 deg
Xform/ Xform Rotate
Select the rotated line; Enable Copy and set # to 1; Rotation angle 10 5 deg
Page 4-4
4/5-Axis TUTORIAL 4
STEP ... & 5 Axis Mill Training Tutorials
To order more books:
Call 1- 800-5 29- 5 517 or
Visit www.inhousesolutions.com or
Contact your Mastercam Dealer
4/5-Axis
Select the arcs as shown in the following...
... toolpath using Mastercam s Backplot and Verify verification.
Page 2 2
TABLE OF CONTENTS
Getting Started A 1
Tutorials
Tutorial #1, 2D Geometry Contour 1 1
Tutorial #2, 2D Multi Contour 2 1
Tutorial ... Axis Wire path 3 1
Tutorial #4, Punch And Die Created From the Same Work Piece 4 1
Tutorial #5, Multiple Tabs 5 1
Tutorial #6, No Core Wire path 6 1
General Notes B1
WIRE X4
STEP 16 : ESTABLISH ... the Chain Manager Dialog box.
Page 2 16
Wire Training Tutorials
To order more books:
Call 1- 800-5 29- 5 517 or
Visit www.inhousesolutions.com or
Contact your Mastercam Dealer
WIRE X4
Select options
Enable...