Tài liệu PowerWorx® Power Distribution Products Select Series™ Fuse Platform ppt

10/03 • 100571 600 mm Products 103 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 PowerWorx ® Power Distribution Products Select Series ™ Fuse Platform Catalog Number LED Configuration Power on and fuse alarm LEDs Fuse alarm LED only P F Alarm Contact Connection Wire-wrap Screw-down barrier terminal strip W S PWX-041 CR Two-hole compression lug (stud type) Powering Input C Access Standard (front and rear access) R Panel Color and Mounting Putty white, EIA/WECO mounting Putty white, ETSI mounting P W S Screw-down barrier terminal strip Powering Output A2 G4* 2 TPA, 4 GMT A2 G5** 2 TPA, 5 GMT A2 G1** 2 TPA, 10 GMT A2 XX 2 TPA per bus A4 G4* 4 TPA, 4 GMT A4 G5** 4 TPA, 5 GMT A4 G1** 4 TPA, 10 GMT A4 XX 4 TPA per bus K2 G4* 2 KLM/KTK, 4 GMT K2 G5** 2 KLM/KTK, 5 GMT K2 G1** 2 KLM/KTK, 10 GMT K2 XX 2 KLM/KTK per bus K3 G4* 3 KLM/KTK, 4 GMT K3 G5** 3 KLM/KTK, 5 GMT K3 G1** 3 KLM/KTK, 10 GMT K3 XX 3 KLM/KTK per bus K4 G4* 4 KLM/KTK, 4 GMT K4 XX 4 KLM/KTK per bus K5 XX 5 KLM/KTK per bus M2 G4* 2 TPM, 4 GMT M2 G5** 2 TPM, 5 GMT M2 G1 2 TPM, 10 GMT M2 XX 2 TPM per bus M3 G4* 3 TPM, 4 GMT M3 G5** 3 TPM, 5 GMT M3 G1** 3 TPM, 10 GMT M3 XX 3 TPM per bus M4 G4* 4 TPM, 4 GMT M4 XX 4 TPM per bus M5 XX 5 TPM per bus G1 XX** 10 GMT per bus Fuse Configuration Dual Input Power Configuration Dual bus configuration Single bus configuration Y N S * G4 configurations accept fuses rated up to 15 Amps. ** G1 and G5 configurations accept fuses up to 10 Amps. In this combination, center to center spacing is 0.250". Distance between barrier walls is 0.200" (3-48 screw post). This applies only for the GMT terminal block. Note: Other configurations are available upon request. † † † † As data and telephony converge, network elements with varying amperage requirements are often mixed within the same bay. The Select Series ™ fuse platform enables service providers to fuse this equipment from one platform, in a single rack unit, making the most of valuable space. Its compact footprint and versatility are well-suited for collocation applications where high-amperage equipment such as routers, DSLAMs, and SONET gear is installed with lower-amperage equipment. Its patent-pending modular design enables service providers to combine TPA, KTK/KLM, TPM or GMT fuses within a single rack unit. Input power up to 100 Amps per bus with up to 50 Amps output power per fuse position is available. For complete specifications, please contact ADC. 10/03 • 100571 600 mm Products 104 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 PowerWorx ® Power Distribution Products Uninterrupted Power GMT Series To ensure constant powering of fused network equipment, the Uninterrupted Power GMT Series features two input power feeds. If power to one fails, the other serves as backup – taking on the load of the failed circuit while maintaining its own load. Schottky-steering diodes ensure panel uptime until input power is restored, while a patent-pending heat dissipation design ensures safety. The panel offers input power up to 60 Amps per bus. Catalog Number GMT Fuse Type Fuse Configuration* CHASSIS HEIGHT STANDARD TOTAL FRONT ACCESS Dual power feed, 10/10 position 1.75" (4.44 cm) 3.50" (8.89 cm) G Putty white Black Panel Color P B D10 *Custom fuse panel configurations available with certain minimums **EIA (Electronic Industries Association), WECO (Western Electric Company), ETSI (European Telecommunications Standards Institute) LED Configuration Power on and fuse alarm LEDs (per fuse holder) P Alarm Contact Connection Wire-wrap Screw-down barrier terminal strip W S PWX-011 G Two-hole compression lug (stud-type) Set screw barrel connector Powering Input C S Mounting Option** Screw-down barrier terminal strip Set screw barrel terminal strip Powering Output S B Access Standard (front and rear access) Total front access (no rear access) R F D10 P EIA/WECO ETSI D E - For complete specifications, please contact ADC. 10/03 • 100571 600 mm Products 105 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 PowerWorx ® Power Distribution Products Traditional GMT Series Catalog Number GMT Fuse Type Fuse Configuration* CHASSIS HEIGHT STANDARD TOTAL FRONT ACCESS Single power feed, 10-position Single power feed, 20-position Single power feed, 40-position Dual power feed, 10/10-position Dual power feed, 20/20-position 1.75" (4.44 cm) 1.75" (4.44 cm) 1.75" (4.44 cm) 1.75" (4.44 cm) 1.75" (4.44 cm) 1.75" (4.44 cm) 3.50" (8.89 cm) 3.50" (8.89 cm) 3.50" (8.89 cm) 3.50" (8.89 cm) G Putty white Black Panel Color P B S10 S20 S40 D10 D20 *Custom fuse panel configurations available with certain minimums **EIA (Electronic Industries Association), WECO (Western Electric Company), ETSI (European Telecommunications Standards Institute) LED Configuration Power on and fuse alarm LEDs (per fuse holder) Fuse alarm LED only (per fuse panel) P F Alarm Contact Connection Wire-wrap Screw-down barrier terminal strip W S PWX-001 G Two-hole compression lug (stud-type) Set screw barrel connector Powering Input C S Screw-down barrier terminal strip Set screw barrel terminal strip Powering Output S B Access Standard (front and rear access) Total front access (no rear access) R F Mounting Option** EIA/WECO ETSI D E With input power up to 65 Amps per bus, the Traditional GMT Series eliminates the need to stock varying amperage fuse panels. Fuse management is simplified by accommodating up to 15 Amps of output power per fuse position – without the need to space fuses. A self-configuring voltage and polarity feature allows a single panel to support most applications, providing ±24Vdc or ±48Vdc power. For complete specifications, please contact ADC. 10/03 • 100571 600 mm Products 106 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 PowerWorx ® Power Distribution Products Advantage Series ™ Platform The Advantage Series platform accepts input power up to 300 Amps per bus, up to 125 Amps per high-current output position, and up to 15 Amps per GMT fuse position (optional). A patent-pending design, the Advantage Series platform can be configured to meet unique network powering needs. Select from various input power cable routing types, fusing options and alarm connectors. Industry standard “bullet” terminal breakers or fuses can be mixed within a single panel, allowing maximum flexibility. PowerWorx panels are independently tested to comply with the industry’s highest standards, including CE, IEC, UL, NEBS Level 3, Telcordia (Bellcore), CSA, and NEC 2002. Compact, flexible PowerWorx configurations suit most network applications. Using the universal mounting brackets, the panel can be flush- or recess-mounted into 19-inch (48.3 cm) and 23-inch (58.4 cm) Electronic Industries Association (EIA) and Western Electric Company (WECO) racks. Catalog Number PWX-061R__ __ __ __ __ __ __ Bus D Dual High-Current Output Per Bus 6 6-position GMT Fuses Y Yes (4/bus) NNo GMT Output Connector S Screw-down X No GMT fuses requested Input Cabling T Top-down with GMT fuses X No GMT fuses Color P Putty Alarm Terminal Type S Screw-down W Wire-wrap D 6P For complete specifications, please contact ADC. 10/03 • 100571 600 mm Products 107 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 Fingerguard FG-01A Front View Designation Card DCK-01A PowerWorx ® Power Distribution Products Advantage Series ™ Platform Accessories *Carling Breakers *TPC Fuses/Fuse Holder 1 AMP: CA1-X0-09-571-A21-MG 15 AMP: TPC-15 10 AMP: CA1-X0-09-572-A21-MG 20 AMP: TPC-20 20 AMP: CA1-X0-09-573-A21-MG 25 AMP: TPC-25 30 AMP: CA1-X0-09-574-A21-MG 30 AMP: TPC-30 40 AMP: CA1-X0-09-575-A21-MG 40 AMP: TPC-40 50 AMP: CA1-X0-09-576-A21-MG 50 AMP: TPC-50 60 AMP: CA1-X0-09-577-A21-MG 60 AMP: TPC-60 75 AMP: CA1-X0-09-578-A21-MG 75 AMP: TPC-75 90 AMP: CA1-X0-09-634-A21-MG 90 AMP: TPC-90 100 AMP: CA1-X0-09-635-A21-MG 100 AMP: TPC-100 125 AMP: TPC-125 *TPC Fuse Holder - TPCDS-BBE-2 *Other ratings upon request. Compression Lugs For Two-Hole Stud-type Input Power Connections Description Compression lug, ships two per pack 2 AWG 1 AWG 1/0 AWG 2/0 AWG 3/0 AWG 4/0 AWG 250 KCMil 300 KCMil 350 KCMil Catalog Number CL-02M CL-01M CL-01M0 CL-02M0 CL-03M0 CL-04M0 CL-250M CL-300M CL-350M Ordering Information Compression lugs provide a robust and reliable electro-mechanical connection. Miscellaneous Accessories Description Circuit breaker fingerguards, ships 12 per pack Circuit breaker/TPC fuse designation cards, ships 12 per pack *TPC fuse holder adapter, ships 12 per pack * Required for mounting TPC fuse holder in Advantage Platform Catalog Number FG-01A DCK-01A FHA-01A Fingerguard FG-01A Side View FHA-01A Ordering Information 10/03 • 100571 600 mm Products 108 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 PowerWorx ® Accessories Description Fuse puller, ships two per pack Catalog Number FP-G Ordering Information GMT Fuse Puller The compact puller grips firmly to remove GMT fuses. Description Designation card holder kit Includes: 1 plastic designation card holder 2 designation cards and window Catalog Number DCK-02 Ordering Information Designation cards held in pressure-sensitive card holder enable easy identification and location of fused equipment. Designation Card Holder and Cards Description GMT designation pin holder ships two per pack Holds up to ten fuse designation pins Adhesive back allows for quick and easy mounting Catalog Number DPK-01 Ordering Information GMT designation pin holder securely holds designation pins for improved fuse value identification. GMT Designation Pin Holder 10/03 • 100571 600 mm Products 109 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 PowerWorx ® Accessories Fuses Description TPM Fuses Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Disconnect, English Miniature Disconnect, Metric Catalog Number TPM-03 TPM-04 TPM-05 TPM-06 TPM-07 TPM-08 TPM-10 TPM-12 TPM-15 TPM-20 TPM-25 TPM-30 TPMDS-E TPMDS-M Ordering Information Ampere Rating 3 Amp 4 Amp 5 Amp 6 Amp 7 Amp 8 Amp 10 Amp 12 Amp 15 Amp 20 Amp 25 Amp 30 Amp 3-30 Amp 3-30 Amp Description TPA Fuses - Alarm Indicator 3 Amps 5 Amps 10 Amps 15 Amps 20 Amps 25 Amps 30 Amps 40 Amps 50 Amps Catalog Number TPA-03 TPA-05 TPA-10 TPA-15 TPA-20 TPA-25 TPA-30 TPA-40 TPA-50 Ordering Information Description KLM Fuses - Non-Indicator* 5 Amps 10 Amps 15 Amps 20 Amps 25 Amps 30 Amps KLM Dummy * All KLM fuse modules house a fuse alarm indicating red LED. Catalog Number KLM-05 KLM-10 KLM-15 KLM-20 KLM-25 KLM-30 KLM Dummy 10/03 • 100571 600 mm Products 110 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 PowerWorx ® Accessories Fuse Size 2/10 Amps 1/4 Amps 3/8 Amps 1/2 Amps 3/4 Amps 1 Amps 1-1/3 Amps 1-1/2 Amps 2 Amps 2-1/2 Amps 3 Amps 3-1/2 Amps 4 Amps 5 Amps 7-1/2 Amps 10 Amps 12 Amps 15 Amps Dummy GMT Color of Indicator Black-Red Violet White-Green Red Brown Gray White White-Yellow Orange Orange-White Blue White-Blue White-Brown Green Black-White Red-White Yellow-Green Red-Blue Pin Catalog Number P-2/10 P-1/4 P-3/8 P-1/2 P-3/4 P-1 P-1 1/3 P-1 1/2 P-2 P-2 1/2 P-3 P-3 1/2 P-4 P-5 P-7 1/2 P-10 P-12 P-15 Fuse Catalog Number F-2/10 F-1/4 F-3/8 F-1/2 F-3/4 F-1 F-1 1/3 F-1 1/2 F-2 F-2 1/2 F-3 F-3 1/2 F-4 F-5 F-7 1/2 F-10 F-12 F-15 GMT Dummy Color of Designation Pin Black-Red Violet White-Green Red Brown Gray White White-Yellow Orange Orange-White Blue White-Blue White-Brown Green Black-White Red-White Yellow-Green Red-Blue Ordering Information GMT Fuses/Fuse Designation Pins – Alarm Indicator Compression Lugs For Two-Hole Stud-type Input Power Connections Description Compression lug, ships two per pack 2 AWG 4 AWG 6 AWG 14 AWG Catalog Number CL-02M CL-04M CL-06M CL-14M Ordering Information Compression lugs provide a robust and reliable electro-mechanical connection. Cable Management Bars For Standard (Front and Rear Access) Fuse Panels Description Cable management bar Putty white Catalog Number CMB-P-19 Ordering Information . +32-2-712-65-42 PowerWorx ® Accessories Fuses Description TPM Fuses Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature Fuse Miniature. 100571 600 mm Products 103 www.adc.com • +32-2-712-65-00 • +32-2-712-65-42 PowerWorx ® Power Distribution Products Select Series ™ Fuse Platform Catalog