Tài liệu Power Distribution Products doc

POWERWORX ® Power Distribution Products www.adc.com • +1-952-938-8080 • 1-800-366-3891 Table of Contents Introduction 1 PowerWorx ® GMT 60e Series Ordering Information 2 Specifications 3 PowerWorx DSX PDP Ordering Information 4 Specifications 4 PowerWorx Traditional GMT Series Ordering Information 5 Specifications 6 Drawings and Sample Configurations 7 PowerWorx Uninterrupted Power GMT Series Ordering Information 8 Drawings and Sample Configuration 8 Specifications 9 PowerWorx SuperFilter ™ GMT Series Ordering Information 10 Specifications 11-12 PowerWorx SuperPower ™ GMT Series Fuse Panels Ordering Information 13 Specifications 14 Drawings and Sample Configurations 15 PowerWorx ® Select Series ™ Fuse Platform Ordering Information 16 Specifications 17 Drawings and Sample Configuration 18 PowerWorx Select Series ™ Fuse Platform with Low Voltage Disconnect Ordering Information 19 Specifications 20 PowerWorx Select Series ™ Circuit Breaker Platform Ordering Information 21 Specifications 22 Drawings and Sample Configurations 23 PowerWorx Accessories Cable Management Bars 24 Compression Lugs 24 Designation Card Holder and Cards 24 GMT Designation Pin Holder 24 GMT Fuses/Fuse Designation Pins – Alarm Indicator 25 GMT Fuse Puller 25 KLM Fuses – Non-Indicator 25 Rear Covers 26 Ring Lug Kit 26 TPA Fuses – Alarm Indicator 26 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Table of Contents PowerWorx ® Advantage Series ™ Platform Ordering Information 27 Specifications 28 Drawings and Sample Configurations 29 Accessories for Advantage Series ™ Carling Breakers 30 Circuit Breaker Fingerguards 30 Compression Lugs 30 Input Power Terminal Block Cover 30 Output Power Terminal Block Cover 30 TPC Fuses/Fuse Holder 30 TPC Fuse Holder Adapter 30 Index 31-32 As networks and the variety of powered network devices grow, so does the need for reliable power distribution and protection in multimedia broadband networks. ADC’s PowerWorx power distribution products have been engineered from the ground up to properly protect and distribute power to valuable, revenue-generating network equipment. PowerWorx panels are independently tested to comply with the industry’s highest standards, including CE, IEC, UL, NEBS Level 3, Telecordia (BellCore), CSA, and NEC 2002. Flexible PowerWorx configurations suit almost every network application and the platform sets a new standard – delivering the power and the protection that service providers need. 8/07 • 105203AE PowerWorx ® Products PowerWorx ® Power Distribution Products Introduction 1 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Features • Up to a 15-year warranty • Compliant with all major standards, including UL, NEBS Level 3, Telcordia (BellCore), NEC 2002, CSA, IEC, and CE • Backed by ADC quality, manufacturing excellence and exceptional customer service • Flexible platform for use in central offices, headends, hubs, remote sites, etc. PowerWorx Platform Decision Matrix High Amperage Fuse Panel Up to 300 Amps/BUS Advantage Series ™ Fuse and Circuit Breaker Platform • Fuse Panel Without Filter With Filter SuperFilter ™ GMT Panel • Choose Platform Circuit Breaker Panel Up to 100 Amps/BUS Select Series ™ Circuit Breaker Platform • Choose Maximum Input Amperage Up to 100 Amps/BUS (GMT, KLM, TPA Combo Fuses) SuperPower ™ GMT Panel (GMT Fuses) • Select Series ™ Fuse Platform • Low Voltage Disconnect Panel (GMT, TPA and GMT/TPA Combo Fuses) • Uninterrupted Capabilities Required? Yes Uninterrupted Power GMT Panel • No Traditional GMT Panel • Non-NEBS GMT 60e Panel (International Applications) • Choose Fusing Up to 65 Amps/BUS (GMT Fuses) 8/07 • 105203AE PowerWorx ® Products PowerWorx ® GMT 60e Series Fuse Panels (Non-NEBS) Ordering Information 2 www.adc.com • +1-952-938-8080 • 1-800-366-3891 An Economical Alternative As networks and the variety of powered net- work devices grow, so does the need for reliable power distribution and protection in multimedia broadband networks. ADC's PowerWorx has been engineered from the ground up to properly protect and distribute power to valuable, rev- enue-generating network equipment. PowerWorx GMT 60e Series panels set a new standard – delivering the power and the protec- tion that service providers need. So if your net- work needs power that works, use PowerWorx. PowerWorx GMT 60e Series fuse panels deliver power to valuable, revenue-generating network equipment located in broadband multiservice networks. The GMT 60e Series accepts input power up to 60 Amps per bus. Up to 15 Amps per fuse position is standard. PowerWorx panels are independently tested to comply with the industry's highest standards, including CE, UL, CSA, and NEC 2002. In addi- tion, the GMT 60e Series is backed by a five-year warranty. Flexible PowerWorx configurations suit most every network application. Panels can be mount- ed into 19-inch (48.3 cm), 23-inch (58.4 cm), Electronic Industries Association (EIA) or Western Electric Company (WECO), and 600 mm racks. User-friendly ”upside down“ fuse holders and high-brilliance LEDs allow technicians to quickly identify input power failure and blown fuse alarms. Description Catalog Number Shipping GMT60e Series Fuse Panel - Standard front and rear access, EWX-001RGSBD10XEP Standard GMT fuse type. Features set-screw barrel connector input and set-screw barrel terminal strip output. Dual power feed, 10/10 position fuse configuration. Does not include an output alarm. Putty white. GMT60e Series Fuse Panel - Standard front and rear access, GMT EWX-001RGSBD10BEP Standard fuse type. Features set-screw barrel connector input and set-screw barrel terminal strip output. Dual power feed, 10/10 position fuse configuration. Includes set-screw barrel type alarm contact connection. Putty white. GMT60e Series Fuse Panel - Standard front and rear access, GMT EWX-001RGCBD10BEP Standard fuse type. Features stud-type powering input and set-screw barrel terminal strip output. Dual power feed, 10/10 position fuse configuration. Includes set-screw barrel type alarm contact connection. Putty white. Ordering Information 8/07 • 105203AE PowerWorx ® Products PowerWorx ® GMT 60e Series Fuse Panels Specifications 3 www.adc.com • +1-952-938-8080 • 1-800-366-3891 STANDARDS: PHYSICAL Dimensions (HxWxD): Weight: Rack Mounting Width: Rack Unit Spacing: Housing Material: Housing Finish: POWER Fuse Capacity*: Panel Capacity: Operating Voltage: Power Dissipation: Fail Alarm Indicators: Alarm Contact Connection: Alarm Contact Relay: Input Feed Connection: Output Feed Connection: Grounding: ENVIRONMENTAL Storage Temperature: Operating Temperature: Operating Humidity: Operating Altitude: WARRANTY Meets UL, NEC 2002, CSA, and CE standards Standard Access: 1.75" x 17.12" x 3.0" (4.44 x 43.48 x 7.62 cm) Dimensions do not include depth of power connectors, alarm lamps or fuses. Approximately 4 lbs. (1.8 kg) 19" (48.3 cm) WECO (2")/EIA (1.75") rack unit spacing Flush mounting 23" (58.4 cm) and 600 mm rack extenders also available WECO (2")/EIA (1.75") Cold-rolled 16 gauge steel Putty white powder-coat 0.2 to 15 Amps 60 Amps (maximum) per bus -48 Vdc (-42 to -56 Vdc tolerance) 12W maximum per bus Red LED indicates blown fuse. Green LED indicates power on. Alarm output contacts provided for audible, visual and remote alarms (Optional). Set-screw barrel terminal strip accepts range of wire up to 12 AWG (3.3 mm) 1 Amp maximum Set-screw barrel connector accepts range of wire up to 6 AWG (13.3 mm) Stud-type (accepting two-hole compression lug) accepts range of wire up to 2 AWG (33.6 mm) Distance between barrier walls (stud-type) .62" (15.8 mm) Stud size .25" (6.35 mm) center to center spacing of studs .625" (15.88 mm) Set-screw barrel terminal strip accepts range of wire up to 12 AWG (3.3 mm) Single-post grounding accepts range of wire up to 10 AWG (5.2 mm) -45°C to 85°C -5°C to 55°C 0% to 95%, non-condensing Up to 13,000 feet (3.96 km) Five years Panels ship with one fused-equipment designation card holder and card and one ring lug (for grounding). * Important Note: The fuse manufacturer recommends that GMT fuses rated 8 to 15 Amps be continuously operated at no more than 70% of their nominal current rating. 8/07 • 105203AE PowerWorx ® Products PowerWorx ® DSX PDP Series Ordering Information 4 www.adc.com • +1-952-938-8080 • 1-800-366-3891 Primarily used to power LEDs in DSX modules, the PDP Series is also used to power auxiliary equipment such as intraoffice and bridging repeaters as well as communication panels. Features two-hole compression lug-style power input terminals, field-replaceable, high brilliance red LEDs to ensure panel uptime and enhanced fuse visibility with "upside down" installed GMT fuse holders. Panel is compliant with NEBS Level 3, UL, NEC 1999 and CSA. GMT Fuses Input power: Bus amperage: Remote alarm contact (resistive load): Local alarm indicator: GMT Fuses: -42 to -56 Vdc (no strapping required) 60 Amps maximum per bus 125V maximum LED 3 Amps maximum per fuse Electrical Specifications 20-Position Fuse Panel Description Dimensions (HxW) Catalog Number Shipping The PDP-FPCS201PWWXX is a Lower Amperage 1.75" x 19"/23" PDP-FPCS201PWWXX Fuse Panel - Standard front and rear access with (4.5 x 48.3/58.4 cm) 3 amp maximum GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output. Features single power feed, single 20 position fuse configuration, fuse alarm LED, wire wrap alarm contact connection and EIA/WECO mounting option. Putty White. The PDP-FPCS201BWWXX is a Lower Amperage 1.75" x 19"/23" PDP-FPCS201BWWXX Standard Fuse Panel - Standard front and rear access with (4.5 x 48.3/58.4 cm) 3 amp maximum GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output. Features single power feed, single 20 position fuse configuration, fuse alarm LED, wire wrap alarm contact connection and EIA/WECO mounting option. Black. Ordering Information Description Fuse Color Catalog Number Shipping GMT Fuses Amperage 3 Blue F-3 Standard 2 Orange F-2 Standard 1 - 1/3 White F-1 1/3 Standard 1 Gray F-1 Standard 3/4 Brown F-3/4 Standard 1/2 Red F-1/2 Standard 1/4 Violet F-1/4 Standard Dummy fuse N/A GMT-DUMMY Standard Ordering Information Quick Ship 8/07 • 105203AE PowerWorx ® Products PowerWorx ® Traditional GMT Series Ordering Information 5 www.adc.com • +1-952-938-8080 • 1-800-366-3891 With input power up to 65 Amps per bus, the Traditional GMT Series eliminates the need to stock varying amperage fuse panels. Fuse management is simplified by accommodating up to 15 Amps of out- put power per fuse position – without the need to space fuses. A self-configuring voltage and polarity feature allows a single panel to support most applica- tions, providing ±24Vdc or ±48Vdc power. Note: Panels ship with dummy fuses installed in all positions, one fused equipment designation card holder and card, a voltage designation label, two 2-hole lugs per power bus, two ring lugs (for grounding), and one designation pin holder per fuse holder. Other custom configurations available. For more information call ADC at 1-800-366-3891 Description Catalog Number Shipping PowerWorx Traditional GMT Series Fuse Panel - Standard PWX-001RGCSD10PWDP front and rear access with GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output. Features dual power feed, 10/10 position fuse configuration, power on and fuse alarm LED, wire wrap alarm contact connection and EIA/WECO mounting option. Putty white. PowerWorx Traditional GMT Series Fuse Panel - Standard PWX-001RGCSD10PSDB Standard front and rear access with GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output. Features dual power feed, 10/10 position fuse configuration, power on and fuse alarm LED, screw-down barrier terminal strip alarm contact connection and EIA/WECO mounting option. Black. PowerWorx Traditional GMT Series Fuse Panel - Total front PWX-002FGCSD10PWDP Standard access with GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output. Features dual power feed, 10/10 position fuse configuration, power on and fuse alarm LED, wire wrap alarm contact connection and EIA/WECO mounting option. Putty white. PowerWorx Traditional GMT Series Fuse Panel - Standard PWX-001RGCSD10PSDP Standard front and rear access with GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output. Features dual power feed, 10/10 position fuse configuration, power on and fuse alarm LED, screw-down barrier terminal strip alarm contact connection and EIA/WECO mounting option. Putty. PowerWorx Traditional GMT Series Fuse Panel - Standard PWX-001RGCSD10PWDB Standard front and rear access with GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output. Features dual power feed, 10/10 position fuse configuration, power on and fuse alarm LED, wire wrap alarm contact connection and EIA/WECO mounting option. Black. PowerWorx Traditional GMT Series Fuse Panel - Standard PWX-001RGCSD20PWDP Standard front and rear access with GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output. Features dual power feed, 20/20 position fuse configuration, power on and fuse alarm LED, wire wrap alarm contact connection and EIA/WECO mounting option. Putty white. Ordering Information Quick Ship 8/07 • 105203AE PowerWorx ® Products PowerWorx ® Traditional GMT Series Specifications 6 www.adc.com • +1-952-938-8080 • 1-800-366-3891 PHYSICAL Dimensions (HxWxD) Weight: Rack Mounting Width: Housing Material: Housing Finish: POWER Fuse Capacity 1 : Panel Capacity: Operating Voltage: Power Dissipation: Fail Alarm Indicators: Alarm Contact Connection: Alarm Contact Relay: Input Feed Connection: Output Feed Connection: Grounding: ENVIRONMENTAL Storage Temperature: Operating Temperature: Operating Humidity: Operating Altitude: STANDARDS: WARRANTY Standard access: 1.75" x 17.12" x 8" (4.44 x 43.48 x 20.32 cm) Total-front-access: 3.5" x 21.25" x 4" (8.89 x 53.97 x 10.16 cm) Dimensions do not include depth of power connectors, alarm lamps or fuses. Approximately 10 lbs. (4.5 kg) 19" or 23" (48.3 or 58.4 cm) flush- or recess-mountable with universal mounting brackets. EIA/WECO or ETSI mounting options available. Cold-rolled 16 gauge steel. Polycarbonate protective cover provided with all panels. Putty white or black powder-coat 0.2 to 15 Amps (see chart below for details) 65 Amps (maximum) per bus ±24 Vdc (±21 to ±30 Vdc tolerance) or ±48 Vdc (±42 to ±56 Vdc tolerance) 40 watts maximum Red LED indicates blown fuse. Green LED indicates power on. Alarm output contacts provided for audible, visual and remote alarms. Wire-wrap or screw-down barrier terminal strip 1 Amp maximum Two-hole compression-lug (stud-type) accepts range of wire up to 2 AWG. Set screw barrel connector accepts range of wire up to 6 AWG. Panel ships with two 2-hole lugs (accepting 6 AWG wire) per power bus. Screw-down barrier terminal strip or set screw barrel terminal strip accepts range of wire up to 12 AWG. Two-post grounding accepts range of wire up to #10 AWG for single connection; two-hole compression lug (stud-type) accepts wire up to #2 AWG. -45°C to 85°C -5°C to 55°C 0% to 95%, non-condensing Up to 13,000 feet (3.96 km) Meets UL, Telcordia (Bellcore), NEC 2002, CSA, NEBS Level 3, IEC, and CE standards 15 years Fuse Configuration S10, D10 S10, D10 S20 S20 S40 S40 D20 D20 Output Connector Type Screw-Down Set Screw Screw-Down Set Screw Screw-Down Set Screw Screw-Down Set Screw Max. Amperage Per Fuse Position 15 Amps 15 Amps 15 Amps 15 Amps 10 Amps 15 Amps 10 Amps 15 Amps Range Of Bare Wire Accepted 12-22 AWG 12-24 AWG 12-20 AWG 12-24 AWG 16-24 AWG 12-24 AWG 16-24 AWG 12-24 AWG Post/ Stud Size #6-32 NA #6-32 NA #3-48 NA #3-48 NA Distance Between Barriers Walls 0.325" (8.255 mm) NA 0.325" (8.255 mm) NA 0.20" (5.08 mm) NA 0.20" (5.08 mm) NA 1 Important Note: The fuse manufacturer recommends that fuses be continuously operated at no more than 70% of their nominal current rating. 8/07 • 105203AE PowerWorx ® Products 7 www.adc.com • +1-952-938-8080 • 1-800-366-3891 PowerWorx ® Traditional GMT Series Drawings and Sample Configurations Front Rear FUSE ALARM-A POWER-A FUSE ALARM-B POWER-B FUSE INSTALLED UPSIDE-DOWNFUSE INSTALLED UPSIDE-DOWN 15 AMP MAX PER FUSE 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 BATT B RTN MAX INPUT 65A INPUT VOLTAGE POS OR NEG / 24 OR 48 VDC 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 AUDIO VISUAL REMOTE BATT A RTN MAX INPUT 65A INPUT VOLTAGE POS OR NEG / 24 OR 48 VDC C.GND C.GND ALARM NO C NC Standard 10/10-Position Dual Rear Power Feed Sample Catalog Number: PWX-001RGCSD10PWDP Front Rear Standard Single 10 Rear Power Feed Sample Catalog Number: PWX-001RGCSS10PWDP Front Rear Standard 10/10-Position Dual Rear Power Feed Sample Catalog Number: PWX-001RGCSD20PWDP Front Total-Front-Access 10/10-Position Dual Power Feed Sample Catalog Number: PWX-001FGCSD10PWDP [...]... 15 years w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 12 PowerWorx® SuperPower™ GMT Series Fuse Panels 8/07 • 105203AE PowerWorx® Products Ordering Information PowerWorx SuperPower GMT Series panels accept high input power – up to 100 Amps per bus – with up to 20 Amps output power per GMT fuse position Standard (front and rear access) and total-front-access panels... 5/5 position GMT PowerWorx LVD Front Quick Ship Standard PWX-F41RBA2G5YSPHP 10/10-position GMT, single power feed, LVD Shipping PWX-F41RBA4XXYSPHP 4/4-position TPA, dual power feed, LVD Standard 105203AE PowerWorx LVD Rear 8/07 • PowerWorx LVD ISO w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 19 PowerWorx® Select Series™ Platform with LVD PowerWorx® Products Specifications...PowerWorx® Uninterrupted Power GMT Series To ensure constant powering of fused network equipment, the Uninterrupted Power GMT Series features two input power feeds If power to one fails, the other serves as backup – taking on the load of the failed circuit while maintaining its own load Schottky-steering diodes ensure panel uptime until input power is restored, while a patent-pending... 10 FUSE ALARM • 105203AE PowerWorx® Products Front 1 6 15 AMP MAX PER FUSE BATT A 10 RTN POWER A MAX INPUT 100A BATT GND 8/07 1 2 3 4 6 7 8 9 10 GND RTN B w w w a d c c o m 5 ALARM • 1 GND 2 3 4 5 6 7 8 9 10 BATT B + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 B FUSE ALARM • 1 6 10 POWER B 1 - 8 0 0 - 3 6 6 - 3 8 9 1 RTN 15 PowerWorx® Select Series™ Fuse Platform 8/07 • 105203AE PowerWorx® Products Ordering Information... holder 8/07 • 105203AE PowerWorx® Products Ordering Information w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 10 PowerWorx® SuperFilter™ GMT Series Specifications Specifiations PHYSICAL Dimensions (HxWxD): Weight: Rack Mounting Width: PowerWorx® Products Housing Material: Housing Finish: POWER Fuse Capacity: Panel Capacity: Operating Voltage: Power Dissipation: Fail... Information Description Catalog Number PowerWorx SuperPower GMT Series Fuse Panel - Standard front and rear access with GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output Features 10/10-position dual power feed, power on and fuse alarm LED, Wire wrap alarm contact connection and EIA/WECO mounting option Putty white PowerWorx SuperPower GMT Series Fuse Panel - Standard... strip output Features 20/20-position dual power feed, power on and fuse alarm LED, Wire wrap alarm contact connection and EIA/WECO mounting option Putty white PowerWorx SuperPower GMT Series Fuse Panel - Total front access (no rear) with GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output Features 10/10-position dual power feed, power on and fuse alarm LED, Wire wrap... input power up to 60 Amps per bus Ordering Information Description Catalog Number PowerWorx Uninterrupted Power GMT Series Fuse Panel Standard front and rear access with GMT fuse, two-hole compression lug input and screw-down barrier terminal strip output Features 10/10-position dual power feed, power on and fuse alarm LED, Wire Wrap alarm contact connection and EIA/WECO mounting option Putty white PowerWorx... PWX-041RCK4XXYSPSP 8/07 • Front Rear w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 18 PowerWorx® Low Voltage Disconnect Fuse Platform PowerWorx® Products Ordering Information The PowerWorx Low Voltage Disconnect (LVD) fuse panel provides power distribution, protection and LVD functionality in a single chassis The modular panel offers high-density capabilities and... side) w w w a d c c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 8 PowerWorx® Uninterrupted Power GMT Series Specifications PHYSICAL Dimensions (HxWxD): PowerWorx® Products Weight: Rack Mounting Width: Housing Material: Housing Finish: POWER Fuse Capacity1: Panel Capacity: Operating Voltage: Power Dissipation: Fail Alarm Indicators: Alarm Contact Connection: Alarm Contact Relay: . powered network devices grow, so does the need for reliable power distribution and protection in multimedia broadband networks. ADC’s PowerWorx power distribution. protection that service providers need. 8/07 • 105203AE PowerWorx ® Products PowerWorx ® Power Distribution Products Introduction 1 www.adc.com • +1-952-938-8080