Tài liệu hạn chế xem trước, để xem đầy đủ mời bạn chọn Tải xuống
1
/ 12 trang
THÔNG TIN TÀI LIỆU
Thông tin cơ bản
Định dạng
Số trang
12
Dung lượng
1,9 MB
Nội dung
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Spec Sheet CarrierDataProducts In today’s complex and competitive communications environment, carriers must develop a network that can deliver high bandwidth data, voice and video services while maintaining standards of flexibility, reliability and scalability. ADC’s infrastructure products establish a cohesive, easy-to- operate environment in which to add, retire and upgrade equipment/technologies as required by the carrier’s business model and growth plans. The new ADC CarrierDataProducts (CDP) solutions provide a location for the management of both copper and fiber Ethernet cables and ensure optimal performance and adherence to traditional central office standards of operational excellence. Designed to maximize available office space while maintaining manageability, the products provide a centralized point for cross- connecting, testing and patching of Ethernet circuits, promote efficient daily operations and reduce downtime during upgrades. Features: Complete NEBS compliant system Racks • High-density solution for best use of available space • Extensive labelling for accurate record keeping and easy circuit identification • Designed to ensure optimal performance and adherence to central office standards • 23-inch mounting • Standard CO putty white Category 5e and Category 6 patch panels with angled adapter design • Install easily for faster service turn-up • Available with wide variety of adapter types to support widest range of equipment • RJ45 to RJ45 • RJ45 to LSA-PLUS ® punchdown connection technology (wire can be terminated with either a KRONE ® or 110 tool) • RJ45 to RJ21 Carrier Glide System • Reduces cable tension • Manages copper and fiber Ethernet cables from switches and patch panels • Wide cable openings allow for 25-pair cable and cable bundles 2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 CarrierDataProducts (CDP) Drop-In Bays ADC’s CarrierData Product (CDP) start-up, expansion, and empty drop-in bays all include 7'x 23" racks and feature cable management troughs with carrier glide. The easy single-part ordering system for both the bay and glide system eliminates the need for placing multiple orders and simplifies the ordering process. In addition, ADC’s CDP drop-in bays are preconfigured, which saves valuable installation time. Description Catalog Number Loaded start-up bay Includes: • 7' x 23" rack • Upper and lower cable management troughs • (30) Category 6 RJ45 to RJ45 Ethernet patch panels • (2) Glide unequal flange adapter brackets • (1) 8" Glide system and (1) 10" Glide system with spools • (2) end guards ADC-BC6NNRR-30G Empty start-up bay Includes: • 7' x 23" rack • Upper and lower cable management troughs • (2) Glide unequal flange adapter brackets • (1) 8" Glide system and (1) 10" Glide system with spools • (2) end guards ADC-BESNNNN-00G Empty expansion bay Includes: • 7' x 23" rack • Upper and lower cable management troughs • (2) Glide unequal flange adapter brackets • (1) 10" Glide system with spools ADC-BEENNNN-00G O r d e r i n g I n f o r m a t i o n 9 / 0 6 • 1 0 2 8 3 1 A E CarrierDataProducts (CDP) 3 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 CarrierDataProducts (CDP) Patch Panels 9 / 0 6 • 1 0 2 8 3 1 A E CarrierDataProducts (CDP) Front View Rear View Cat 6 Angled Patch Panel (ADCPP246R23AP) Front View Rear View Cat 5e Flat Patch Panel (ADCPP245800PTEL) Description Front Connector Rear Connector Catalog Number Category 6 panel 24-port 48-port RJ45 RJ45 ADCPP246R23AP ADCPP486R23AP Category 5e panel 24-port 24-port 24-port, non-angled design 48-port RJ45 RJ45 RJ45 RJ45 RJ45 Punchdown RJ21 RJ45 ADCPP245E23AP ADCPP24AC5ET23AP ADCPP245800PTEL ADCPP485E23AP T1 panel 28-port 28-port 28-port 28-port RJ48X RJ48C RJ48X RJ48X Wire-wrap Wire-wrap 64-pin Wire-wrap and 64-pin, with front monitor jack MPP-GDXBA1 MPP-GDXBA2 MPP-DX2BA0 MPP-N28BA1 T1 wall mount panel, 14-port RJ45 Side Connector (no rear connector): Wire-wrap MPP-CXZXF4 O r d e r i n g I n f o r m a t i o n Features • NEBS compliant • Angled design for best cable management • 23-inch mounting • Putty white • Additional labels for easy circuit identification • Universal wiring label for easy termination of either 568A/B 4 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 9 / 0 6 • 1 0 2 8 3 1 A E CarrierDataProducts (CDP) CarrierDataProducts (CDP) Cable Management Carrier Glide System Description Catalog Number Carrier Glide System with front and rear cable management fingers, and front cable management spools. No rear cable management spools (ordered separately); putty white 8" width ADCCMS-08P 10" width ADCCMS-10P Carrier Glide System with front only cable management fingers and front cable management spools. No rear cable management spools (ordered separately); putty white 6" width cable management spools. No rear cable management spools ADCCMSF-06P Unequal flange (UEF) adapter brackets, putty white One REQUIRED for each set of Carrier Glide System ordered when mounting on UEF rack. Not required for channel racks ADCCMIVBUFASP Rear spool, black, quantity: 1 ADCCMVIBSP Kit of 6 rear spools, black ADCMVIBSP-06 Glide stabilizers Recommended only when not supported by end guard 6" Glide ADCCMVESB06-P 8" Glide ADCCMVESB08-P 10" Glide ADCCMVESB10-P O r d e r i n g I n f o r m a t i o n Features • Integrated front, rear, horizontal and vertical cable management • Patented rib cage design eliminates horizontal support trays and bars • Built-in bend radius protection ensures network integrity • Designed for quick and easy moves, adds and changes • Used for single rack or as inter-rack unit 5 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 9 / 0 6 • 1 0 2 8 3 1 A E CarrierDataProducts (CDP) CarrierDataProducts (CDP) Cable Management 21129-A NETWORK RACK NETWORK RACK PWUEF-7ERN GLIDE SUPPORT BRACKET (ADCCMVESB06-P shown) ADCCMVESBO8-P (USED WITH 8” GLIDE) ADCCMBESB10-P (USED WITH 10” GLLIDE) UNEQUAL FLANGE ADAPTER PLATE ADCCMVIBUFASP REAR GUARD BOX RAC-OXO439 BASE FILLER PANEL ADCBFNW-08P (8” GLIDE) ADCBFNW-10P (10” GLIDE) GLIDE RIB CAGE ADCCMS-08P (8” GLIDE) ADCCMS-10P (10” GLIDE) Carrier Glide System 9 / 0 6 • 1 0 2 8 3 1 A E CarrierDataProducts (CDP) CarrierDataProducts (CDP) Cable Management 6 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Carrier Glide System – Additional Hardware Glide Base Filler Panels Glide base filler panels are used to extend the 8- and 10-inch Glide Cable Management System (GCMS) with both front and rear cable management, filling the space between two rack frames. It helps prevent damage to cables by giving the base of the bay lineup a clean and even surface. End Guard The end guard is a protection mechanism that provides stabilization as well as signifies the end of a lineup. The end guard may be mounted to any unequal flange (UEF) or network style bay is shipped with an upper and lower bracket. Ordering information follows on next page. ADCBFNW-XXP End guard as installed next to Glide System 9 / 0 6 • 1 0 2 8 3 1 A E CarrierDataProducts (CDP) CarrierDataProducts (CDP) Cable Management 7 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 Description Catalog Number Base fillers (see drawing on page 5) 6" width ADCBFNW-06P 8" width ADCBFNW-08P 10" width ADCBFNW-10P End guards 6" Glide ADCCMEG15-06 8" Glide ADCCMEG15-08 10" Glide ADCCMEG15-10 Empty rack 7' x 23" x 12", putty white PWUEF-7ERN Rear guard box extension. Add to rack when 15" footprint is required RAC-0X0439 Cable troughs , putty white Lower trough ADCCMT-27 Upper trough AUX-2D0006 Middle trough ADCCMHIB23-3UW LSA-PLUS ® punchdown tool 6417 2 055-01 Vertical cable tie down brackets (length: 5") BC-5 Horizontal cable tie down bar AUX-0X0092 Retractable writing shelf RWS23-PW O r d e r i n g I n f o r m a t i o n 8 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 9 / 0 6 • 1 0 2 8 3 1 A E CarrierDataProducts (CDP) CarrierDataProducts (CDP) Category 6 Patch Cords Patch Cords for Category 6 Patch Panels These impedance matched patch cords exceed all performance requirements for Category 6. The plug is designed with integrated strain relievers that prevent the cable from moving at the termination point when the cable is flexed, safeguarding circuit integrity and guaranteeing maximum performance. The strain relievers also ensure that proper bend radii are maintained throughout the network. Description Cable Color Catalog Number* RJ45 plug to RJ45 plug, T568B Quantity: 1 Blue 6645-2-781-XX Green 6645-2-784-XX Grey 6645-2-787-XX Red 6645-2-782-XX White 6645-2-780-XX Yellow 6645-2-783-XX O r d e r i n g I n f o r m a t i o n 0RJ45 plug RJ45 plug (T568B) *Replace XX with: 04 = 4' 07 = 7' 10 = 10' 15 = 15' 25 = 25' 50 = 50' Contact ADC for additional cable colors Category 6 patch cord Features • Exceeds TIA/EIA Category 6 requirements • Copper conductors in the cable pairs are stranded for superior flexibility and compacted to a near-round shape for optimum signal strength • Durable design to be in operation beyond 20-year product warranty • Impedance matched patch cord for maximum throughput • Flexible strain relief boot maintains proper bend radius to ensure peak performance • Up to 32 percent smaller outer diameter than other patch cords • UL 1863 listed and Category 6 performance verified 9 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 9 / 0 6 • 1 0 2 8 3 1 A E CarrierDataProducts (CDP) CarrierDataProducts (CDP) Category 5e Patch Cords Patch Cords for Category 5e Patch Panels These patch cords implement ADC’s AirES ® technology. The use of air increases signal strength and improves transmission speed, while reducing crosstalk. As a result this allows the conductor and insulation diameter to be dramatically reduced improving flexability, reducing weight and maximizing tight tray, conduit and duct space. Category 5e patch cord Features • Impedance matched patch cord for maximum throughput • Patented AirES technology • Exceeds TIA/EIA Category 5e requirements • Up to 28% smaller outer diameter than other patch cords • Enhanced flexibility, which notably improves handling and circuit tracing • Improved electrical transmission • Strain relief boot maintains proper bend radius to maintain reliability and ensure peak performance • UL 1863 listed and Category 5e performance verified Ordering information follows on the next page. 9 / 0 6 • 1 0 2 8 3 1 A E CarrierDataProducts (CDP) 10 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 CarrierDataProducts (CDP) Category 5e Patch Cords Description Cable Color Catalog Number* RJ45 plug to RJ45 plug, T568B, wired straight through Quantity: 1 White TP5ETA-WTXX Red TP5ETA-RDXX Blue TP5ETA-BLXX Green TP5ETA-GNXX Yellow TP5ETA-YLXX Gray TP5ETA-GYXX RJ45 plug to RJ45 plug, T568A, wired straight through Quantity: 1 White TP5ETA0WTXX Red TP5ETA0RDXX Blue TP5ETA0BLXX Green TP5ETA0GNXX Yellow TP5ETA0YLXX Gray TP5ETA0GYXX RJ45 plug to RJ45 plug, crossover wired Quantity: 1 White TP5ETACWTXX Red TP5ETACRDXX Blue TP5ETACBLXX Green TP5ETACGNXX Yellow TP5ETACYLXX Gray TP5ETACGYXX O r d e r i n g I n f o r m a t i o n RJ45 plug (T568B) RJ45 plug (T568B) RJ45 plug (T568A) RJ45 plug (T568A) RJ45 plug (T568B) RJ45 plug (T568A) *Replace XX with: 04 = 4' 10 = 10' 25 = 25' 07 = 7' 15 = 15' 50 = 50' [...]... of publication of this document Because we are continuously improving our products, ADC reserves the right to change specifications without prior notice At any time, you may verify product specifications by contacting our headquarters office in Minneapolis ADC Telecommunications, Inc views its patent portfolio as an important corporate asset and vigorously enforces its patents Products orfeatures contained . 1 0 2 8 3 1 A E Carrier Data Products (CDP) Carrier Data Products (CDP) Cable Management Carrier Glide System Description Catalog Number Carrier Glide System. (8” GLIDE) ADCCMS-10P (10” GLIDE) Carrier Glide System 9 / 0 6 • 1 0 2 8 3 1 A E Carrier Data Products (CDP) Carrier Data Products (CDP) Cable Management