| Tài liệu tham khảo |
Loại |
Chi tiết |
| [1] A. Gottmann, J. Diettrich, G. Bergweiler,M. Bambach, G. Hirt, P. Loosen,R. Poprawe “Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts” German Academic Society for Production Engineering (WGP) 2011, Prod. Eng. Res. Devel. 5:263–27.1DOI 10.1007/s11740-011-0299-9 (2011) |
Sách, tạp chí |
| Tiêu đề: |
Laser-assisted asymmetric incremental sheet forming of titanium sheet metal parts |
|
| [2] A. Hadoush, A. H, van den Boogaard “Substructuring in the implicit simulation of single point incremental sheet forming,the incrementally updated approach”, Int J Mater Form (2009) |
Sách, tạp chí |
| Tiêu đề: |
Substructuring in the implicit simulation of single point incremental sheet forming,the incrementally updated approach |
|
| [6] C. Bouffioux, P. Eyckens, C. Henrard, R. Aerens, A. Van Bael, H. Sol, J. R. Duflou, A.M. Habraken, “Identification of material parameters to predict Single Point Incremental Forming forces”, Springer/ESAFORM 2008 |
Sách, tạp chí |
| Tiêu đề: |
Identification of material parameters to predict Single Point Incremental Forming forces |
|
| [7] C. Bouffioux, P. Pouteau, L. Duchêne, H. Vanhove, J.R. Duflou, A.M. Habraken “Material data identification to model the single point incremental forming process”, Springer-Verlag France 2010 |
Sách, tạp chí |
| Tiêu đề: |
Material data identification to model the single point incremental forming process |
|
| [8] Crina Radu, Eugen Herghelegiu, Ion Cristea, Carol Schnakovszky “Analysis of the surface quality of parts processed by single point incremental forming”, Journal of Engineering Studies and Research – Volume 19 (2013) No. 3 |
Sách, tạp chí |
| Tiêu đề: |
Analysis of the surface quality of parts processed by single point incremental forming |
|
| [9] Dassault “Solving Contact Problems with Abaqus”, Abaqus Handbook edition, 2005 [10] Dassault Corp. “Abaqus user manual” Analysis 1,2,3,4,5,5a, 2009 |
Sách, tạp chí |
| Tiêu đề: |
Solving Contact Problems with Abaqus”, Abaqus Handbook edition, 2005 [10] Dassault Corp. “Abaqus user manual |
|
| [11] David William Adams “Improvements on Single Point Incremental Forming through Electrically Assisted Forming, Contact Area Prediction and Tool Development”, Queen's University Kingston, Ontario, Canada, November 2013 p 15-16 |
Sách, tạp chí |
| Tiêu đề: |
Improvements on Single Point Incremental Forming through Electrically Assisted Forming, Contact Area Prediction and Tool Development |
|
| [13] Edward Leszak “Apparatus and Process for Incremental Dieless Forming”, Patent US3342051,Ser.No. 388.577 10 Claims (Cl. 72- 81) |
Sách, tạp chí |
| Tiêu đề: |
Apparatus and Process for Incremental Dieless Forming |
|
| [14] G. Ambrogio, L. Filice, F. Gagliardi, F. Micari “Three-dimensional FE simulation of single point incremental forming: experimental evidences and process design improving”, The VIII International Conference on Computational Plasticity, CIMNE, Barcelona, 2005 |
Sách, tạp chí |
| Tiêu đề: |
Three-dimensional FE simulation of single point incremental forming: experimental evidences and process design improving |
|
| [15] G. Ambrogio, L. Filice, G.L. Manco “Considerations on the Incremental Forming of Deep Geometries”, CIRP Annals - Manufacturing Technology57, pp 267-268 (2008) |
Sách, tạp chí |
| Tiêu đề: |
Considerations on the Incremental Forming of Deep Geometries |
|
| [16] G. Buffa, D. Campanella, L. Fratini “On the improvement of material formability in SPIF operation through tool stirring action”, Int J. Advance Manufacturing Technology 66:1343–1351, Doi 10.1007/S00170-012-4412-9 (2013) |
Sách, tạp chí |
| Tiêu đề: |
On the improvement of material formability in SPIF operation through tool stirring action |
|
| [17] G. Hussain, L. Gao, Z. Y. Zhang, “Formability evaluation of a pure titanium sheet in the cold incremental forming process”, Int J Adv Manufacturing Technology, 2008 [18] George E Dieter “Mechanical Metallurgy” McGraw-Hill Book Company, London(1988) |
Sách, tạp chí |
| Tiêu đề: |
Formability evaluation of a pure titanium sheet in the cold incremental forming process”, Int J Adv Manufacturing Technology, 2008 [18] George E Dieter “Mechanical Metallurgy |
|
| [19] Ghulam Hussain, Gao Lin, Nasir Hayat “improving profile accuracy in SPIF Process through statistical optimization of forming parameters”, Journal Of Mechanical Science And Technology, 25 (1) 177~182 (2011) |
Sách, tạp chí |
| Tiêu đề: |
improving profile accuracy in SPIF Process through statistical optimization of forming parameters |
|
| [20] Ghulam Hussain, Gao Lin, Nasir Hayat,“Improving profile accuracy in SPIF process through statistical optimization of forming parameters” Journal of Mechanical Science and Technology 25 (1) 177~182, KSME & Springer, 2011 |
Sách, tạp chí |
| Tiêu đề: |
Improving profile accuracy in SPIF process through statistical optimization of forming parameters |
|
| [21] Giuseppina Ambrogio, Luigino Filice, Francesca Guerriero, Rosita Guido, Domenico Umbrello “Prediction of incremental sheet forming process performance by using a neural network approach”, Int J Adv Manuf Technol 54:921–930DOI 10.1007/s00170-010-3011-x (2011) |
Sách, tạp chí |
| Tiêu đề: |
Prediction of incremental sheet forming process performance by using a neural network approach |
|
| [22] H. Arfa, R. Bahloul, H. BelHadjSalah “Finite element modelling and experimental investigation of single point incremental forming process of aluminum sheets:influence of process parameters on punch force monitoring and on mechanical and geometrical quality of parts”, Int J Mater Form 6:483–510, DOI 10.1007/s12289- 012-1101-z (2013) |
Sách, tạp chí |
| Tiêu đề: |
Finite element modelling and experimental investigation of single point incremental forming process of aluminum sheets: influence of process parameters on punch force monitoring and on mechanical and geometrical quality of parts |
|
| [25] I. Bagudanch, G. Centeno, C. Vallellano, M.L. Garcia-Romeu “Forming force in Single Point Incremental Forming under different bending conditions”, Proceedings of the 5th Manufacturing Engineering Society International Conference , Zaragoza, 2013 |
Sách, tạp chí |
| Tiêu đề: |
Forming force in Single Point Incremental Forming under different bending conditions |
|
| [26] J. I. V. Sena, R. J. Alves de Sousa, R. A. F. Valente “Single point incremental forming simulation with an enhanced assumed strain solid-shell finite element formulation”, Springer-Verlag France 2010 |
Sách, tạp chí |
| Tiêu đề: |
Single point incremental forming simulation with an enhanced assumed strain solid-shell finite element formulation |
|
| [27] J. J. Orteu, F.Bugarin, J. Harvent, L. Robert, V. Velay “Multiple-Camera Instrumentation of a Single Point Incremental Forming Process Pilot for Shape and 3D Displacement Measurements: Methodology and Results”, Experimental Mechanics (2011) 51:625–639. © Society for Experimental Mechanics |
Sách, tạp chí |
| Tiêu đề: |
Multiple-Camera Instrumentation of a Single Point Incremental Forming Process Pilot for Shape and 3D Displacement Measurements: Methodology and Results |
|
| [28] J. Jeswiet, D. Young and M. Ham, “Non-Traditional Forming Limit Diagrams for Incremental Forming”, Advanced Materials Research, Vols. 6-8, pp 409-416 (2005) |
Sách, tạp chí |
| Tiêu đề: |
Non-Traditional Forming Limit Diagrams for Incremental Forming |
|