Tài liệu Manual Classroom Setup Guide ppt

Manual Classroom Setup Guide Course Number: 1910A Part Number: X05-91046 Released: 10/2000 Information in this document is subject to change without notice. The names of companies, products, people, characters, and/or data mentioned herein are fictitious and are in no way intended to represent any real individual, company, product, or event, unless otherwise noted. Complying with all applicable copyright laws is the responsibility of the user. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Microsoft Corporation. If, however, your only means of access is electronic, permission to print one copy is hereby granted. Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except as expressly provided in any written license agreement from Microsoft, the furnishing of this document does not give you any license to these patents, trademarks, copyrights, or other intellectual property.  2000 Microsoft Corporation. All rights reserved. Microsoft, Active Directory, ActiveX, BackOffice, BizTalk, FrontPage, Microsoft Press, MSDN, MS-DOS, PowerPoint, Visio, Visual Basic, Visual C++, Visual FoxPro, Visual InterDev, Visual J++, Visual SourceSafe, Visual Studio, Win32, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the U.S.A. and/or other countries/regions. Other product and company names mentioned herein may be the trademarks of their respective owners. Program Managers: Rhy Mednick, Susie Parrent Instructional Designer: Susie Parrent Subject Matter Experts: David Chesnut, Sam Gill (TechnoWiz), Michel Pahud Media Management: David Mahlmann Editing Manager: Lynette Skinner Editor: Mick Alberts, Jennifer Linn Production Manager: Miracle Davis Print Coordinators: Linda Lu Cannon (Write Stuff), Marlene Lambert (Online Training Solutions, Inc.) Build Coordinator: Eric Wagoner Graphic Artist: Scott Serna Test Lead: Eric Myers Manufacturing Manager: John Williams Group Product Manager: Juan Fernando Rivera Lead Product Manager, System Services and Infrastructure: Edward Dudenhoefer Manufacturing Manager: Rick Terek Operations Coordinator: John Williams Manufacturing Support: Laura King; Kathy Hershey Lead Product Manager, Release Management: Bo Galford Group Manager, Courseware Infrastructure: David Bramble General Manager: Robert Stewart Course Number: 1910A Part Number: X05-91046 Released: 10/2000 Manual Classroom Setup Guide iii Contents Classroom Requirements 1 Instructor Computer Hardware .1 Student Computer Hardware 1 Required Software 2 Classroom Configuration 3 Setup Instructions . 3 Before You Begin .3 Computer Setup 3 Installation Procedures 4 THISPAGE INTENTIONALLY LEFT BLANK Manual Classroom Setup Guide 1 Classroom Requirements This course requires a classroom with a minimum of one computer for the instructor and one for each student. Before class begins, install and configure all computers by using the following information and instructions. Instructor Computer Hardware The following hardware is the minimum required for the instructor computer: ! Pentium II 300 ! PCI 2.1 bus ! 256 megabytes (MB) of RAM ! 4-gigabyte (GB) hard disk ! 256-kilobyte (KB) L2 cache ! DVD or 12X CD-ROM drive ! Network adapter ! 4-MB video adapter ! Super VGA (SVGA) monitor (17 inch) ! Microsoft ® Mouse or compatible pointing device ! Sound card with speakers ! Internet access ! Projection display device that supports SVGA 800x600, 256 colors Student Computer Hardware The following hardware is the minimum required for each student computer: ! Pentium 166 ! 256 MB of RAM ! 4-GB hard disk ! 256-KB L2 cache ! DVD or 12X CD-ROM drive ! Network adapter ! 4-MB video adapter ! SVGA monitor (15 inch minimum; 17 inch recommended) ! Microsoft Mouse or compatible pointing device ! Sound card with headphones or speakers recommended ! Internet access 2 Manual Classroom Setup Guide Required Software Except where noted as instructor computer only, the following software is required for all classroom computers. Follow the sequence of installing software and completing configuration tasks. ! Microsoft Windows ® 2000 Server • Active Directory ™ Services • Message Queuing ! Microsoft Windows 2000 Service Pack 1 ! Microsoft Visual Studio ® 6.0, Enterprise Edition • Microsoft Visual C++ ® 6.0 • Microsoft Visual Basic ® 6.0 ! Microsoft MSDN ® Library • Full Text Search Index • Visual C++ Documentation • Visual Basic Documentation • Visual Studio Shared Documentation ! Visual Studio Service Pack 4 ! Microsoft SQL Server™ 7.0, Standard Edition ! SQL Server 7.0 Service Pack 2 ! Microsoft Visio ® , Professional Edition ! Microsoft Word 2000 Service Release 1 (SR-1) ! Market Purchasing (the sample application distributed with the course) ! Microsoft PowerPoint ® 97 and courseware fonts (instructor computer only) Manual Classroom Setup Guide 3 Classroom Configuration The classroom is configured in a multiple domain model in which each computer is promoted to domain controller. Use computer names, domain names, and network basic input/output system (NetBIOS) names from the table. If a Dynamic Host Configuration Protocol (DHCP) server is available, use it to assign Internet Protocol (IP) addresses. Otherwise, use the IP addresses provided. Computer name IP address Domain name Instructor 131.107.2.200 Domain.com StudentXX 131.107.2.2XX DomainXX.com All computers are assigned the Subnet Mask of 255.255.255.0. Configure each computer as a domain controller. Replace XX with a unique number for each student computer, starting with 01 for the first student computer. Setup Instructions Use the following procedures to prepare each computer for class. Before You Begin You will need to do the following: ! Read through all setup procedures. ! Make sure that you have the Trainer Materials compact disc that is provided with the course materials. Estimated time to set up the classroom: 7 hours Computer Setup Use the following instructions to set up the classroom computers. ! Set up the hardware 1. Set up the hardware according to the manufacturer’s instructions. (Refer to the hardware requirements.) 2. Configure the hard disk as follows: • Drive C: 4 GB formatted as FAT32 (The drive will be converted to NTFS as part of the Windows 2000 Server installation.) Note 4 Manual Classroom Setup Guide Installation Procedures ! Install and configure Windows 2000 Server To speed up this installation, run SMARTDrive 5.0 or higher (smartdrv.exe), a utility that ships with Microsoft MS-DOS ® version 6.22, prior to running the Windows 2000 Server setup program. 1. From a DOS prompt, type CD drive letter:\i386\winnt.exe and press ENTER. 2. When the Welcome to Setup screen is displayed, press Enter to set up Windows 2000. 3. Follow the prompts to install Windows 2000 Server. Use the parameters provided in the following table. Respond to all other installation prompts with defaults or with information appropriate for your computer or location. When this information is required Use Partition Install to the primary DOS partition. File system Use NTFS. Allow Windows 2000 installer to convert the drive to NTFS from FAT. Regional settings Use a setting appropriate to your locale. Personalize your software Enter your name and your organization’s name. Licensing modes Per server. Five concurrent connections. Computer name “Instructor” for the instructor computer. “StudentXX” for the student computers. Administrator password Leave blank. Windows 2000 components Add Message Queuing. Add Domain Name Service (DNS), which is found in Networking Services. Date and time settings Use the correct date and time. Networking settings Click Custom Settings, and then click Internet Protocol (TCP/IP). Click Properties. IP address See the table above, in “Classroom Configuration.” Subnet mask 255.255.255.0 Preferred DNS server Set this to the IP address for this computer. Workgroup and computer domain Click OK. Click Next. The default selection is No, this computer is not on a network, or is in a network without a domain, using WORKGROUP. Click Next. Completing Windows 2000 setup wizard Click Finish. Tip Manual Classroom Setup Guide 5 ! Install Windows 2000 Service Pack 1 • Run the service pack setup executable file. Proceed with the installation of the service pack. Use default settings at every dialog box. ! Configure display settings 1. Right-click the desktop, click Properties, and then click the Settings tab. 2. Use the slider to configure the screen area to at least 800 by 600 pixels. ! Configure Active Directory 1. In the Configure Your Server window, click Active Directory. 2. Scroll to the bottom of the window and click Start the Active Directory Wizard. Use this table to complete the Active Directory wizard. Dialog box name Default setting Action required Welcome to the Active Directory Installation Wizard Click Next. Domain Controller Type Domain controller for a new domain Click Next. Create Tree or Child Domain Create a new domain tree Click Next. Create or Join Forest Create a new forest of domain trees Click Next. New Domain Name Enter a full DNS name of Domain.com for the instructor computer or DomainXX.com for the student computers. Click Next. NetBIOS Domain Name Domain NetBIOS Name: DOMAINXX Click Next. Database and Log Locations C:\WINNT\NTDS Click Next. Shared System Volume C:\WINNT\SYSVOL Click Next. Active Directory Installation Wizard (Message) The wizard cannot contact the DNS server that handles “domain.com” to determine if it supports dynamic update. Click OK. Configure DNS Yes, install and configure DNS on this computer (recommended) Click Next Permissions Permissions compatible with pre- Windows 2000 servers Click Next. Directory Service Restore Mode Administrator Password Password fields are blank. Click Next. Summary Click Next. Completing the Active Directory Installation Wizard Click Finish. Active Directory Installation Wizard Click Restart Now. 3. When the computer restarts, log on as Administrator. 6 Manual Classroom Setup Guide ! Install Message Queuing 1. In the Configure Your Server dialog box, click Finish Setup. 2. In Control Panel, open the Add/Remove Programs icon. 3. In the Add/Remove Programs dialog box, click Add/Remove Windows Components. 4. Click Message Queuing Services, and then click Next and use all default settings. 5. Close the Add/Remove Programs dialog box. ! Install SQL Server 7.0 Standard Edition 1. Run the SQL Server 7.0 setup executable. 2. In the opening dialog box, select Install SQL Server 7.0 Components. 3. In the Install SQL Server 7.0 Components dialog box, select the Database Server - Standard Edition install option. 4. In the Select Install Method dialog box, accept the default Local Install option, and then click Next. 5. In the Welcome dialog box, click Next. 6. In the Software License Agreement dialog box, click Yes if you accept the terms of the license agreement. 7. In the User Information dialog box, verify that the information is correct, and then click Next. 8. In the Setup dialog box, enter a valid CD key and then click OK. In the Setup product ID confirmation message box, click OK again. 9. In the Setup Type dialog box, click Next for a typical installation to the default installation locations. 10. In the Services Accounts dialog box, accept the default settings, leave the password blank, and then click Next. 11. In the Start Copying Files dialog box, click Next. 12. In the Licensing dialog box, if you accept the license agreement, click Per seat, and then click Continue. 13. In the Per Seat Licensing dialog box, click I agree that if you agree to the licensing agreement, and then click OK. 14. In the Setup Complete dialog box, click Finish. 15. Exit the SQL Server 7.0 setup application. ! Apply SQL Server 7.0 Service Pack 2 • Run the service pack setup executable file. Proceed with the installation of the service pack. Use default settings in every dialog box. [...]... to close the Internet Options dialog box 10 Manual Classroom Setup Guide ! Install the ADSIEdit utility 1 To install the ADSIEdit utility, run setup. exe This file is located in the \Support\Tools folder on the Windows 2000 Server CD This will start the Windows 2000 Support Tools Setup Wizard 2 Use the following table to run the Windows 2000 Support Tools Setup Wizard Wizard page name Action required... Studio Shared Documentation 8 Manual Classroom Setup Guide 19 In the MSDN Desktop Shortcut dialog box, click Yes 20 In the MSDN Installation Success message box, click OK 21 In the Other Client Tools dialog box, click Next 22 In the Server Setups dialog box, click Next 23 Register Visual Studio at this time, if appropriate ! Apply Visual Studio 6.0 Service Pack 4 • Run the setup executable file for the.. .Manual Classroom Setup Guide 7 ! Install Microsoft Visual Studio 6.0, Enterprise Edition Setup summary: Install Visual C++ 6.0, Microsoft Visual Basic 6.0, Visual Modeler, and MSDN Library 1 Run setup. exe to begin the installation process 2 In the Visual Studio Enterprise Edition dialog box, click... http://www.microsoft.com/office/details/SR1.htm Manual Classroom Setup Guide 9 ! Connect and configure Microsoft Internet Explorer 1 Launch Internet Explorer Use the following table to run the Internet Connection Wizard Dialog box name Default setting Action required Welcome to the Internet Connection Wizard Select I want to set up my Internet connection manually, or I want to connect through a local... default 10 In the Setup Environment Variables dialog box, click OK 11 In the Windows NT Debug Symbols message box, click OK 12 In the Visual Studio 6.0 Enterprise - Restart Windows dialog box, click Restart Windows 13 In the Install MSDN dialog box, click Next 14 In the Path dialog box, enter the path to the setup program for MSDN Library, and then click OK 15 In the MSDN Library setup dialog box,... agree to the terms 7 In the Setup Type dialog box, click Next Typical Install is the default option 8 In the Setup Preview dialog box click Next 9 Register Visio in a manner appropriate to your situation 10 Click to clear the Run Microsoft Visio Now check box, and then click Finish ! Install Microsoft Word 2000 (Service Release 1 (SR-1) version of the product) • Run the setup executable file Proceed... Number and User ID dialog box, enter a valid product ID number, and then click Next 5 In the Visual Studio Enterprise Edition setup options dialog box, click Next 6 In the Choose Common Install Folder dialog box, accept the default and click Next 7 In the Visual Studio 6.0 Enterprise Setup welcome dialog box, click Continue 8 In the Product Identification Confirmation message box, click OK 9 In the Visual... Apply Visual Studio 6.0 Service Pack 4 • Run the setup executable file for the service pack Follow the default options for installing the service pack ! Install Visio 2000 Professional Edition 1 Run the setup executable file, and then click Install Visio 2000 Professional Edition 2 In the Microsoft Windows System Updater dialog box, click Update 3 In the End User License Agreement dialog box, click Accept... information in the Name and Organization boxes and click Next Select An Installation Type page Click Typical, and then click Next Begin Installation page Click Next Completing the Windows 2000 Support Tools Setup Wizard page Click Finish ! Install course files • Run allfiles.exe This file is located in the \Webfiles\Downloads folder on the Student Materials CD It is also on the Trainer Materials CD in the... check box 7 Click Apply, and then click Like Current Folder 8 Click OK ! Install Microsoft PowerPoint 97 Viewer, fonts, and slides (instructor computer only) 1 Run PPView97.exe, which is located in the Pptview folder of the Trainer Materials CD Follow the prompts to install the PowerPoint Viewer 2 Run Courseware.exe, which is located in the Fonts folder of the Trainer Materials CD Follow the prompts . Procedures 4 THISPAGE INTENTIONALLY LEFT BLANK Manual Classroom Setup Guide 1 Classroom Requirements This course requires a classroom with a minimum of one computer. and courseware fonts (instructor computer only) Manual Classroom Setup Guide 3 Classroom Configuration The classroom is configured in a multiple domain model